Download or read book Evaluation of Resin in pulp Technology for Canadian Gold Ores Phase II written by and published by . This book was released on 1987 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase I developed benchscale resin-in-pulp data using authentic gold mill solution and pulp. Phase II reports on a pilot demonstration of the resin-in-pulp process using a typical Canadian carbon-in-pulp feed slurry. Details are presented on feed materials, preliminary resin testwork pilot plant circuit and operation, pilot plant results and discussion, and follow-up laboratory testwork.

Download or read book Evaluation of Resin in pulp Technology for Canadian Gold Ores written by and published by . This book was released on 1986 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase I included: a comprehensive literature survey; procurement of authenticcyanidation leach slurry from a Canadian gold milling operation; laison withthe resin manufacturers to obtain samples of a wide variety of resins fortesting; bench scale testwork to evaluate the various resins for gold recovery, including adsorption and elution data for gold and base metals; a90 hour mini-plant campaign for flowsheet optimization and to obtain information on resin/pulp separation, resin attrition, resin scaling andpoisoning and stage requirements.

Download or read book CIM Bulletin written by Canadian Institute of Mining and Metallurgy and published by . This book was released on 1993 with total page 1158 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CANMET Catalogue of Publications written by Canada Centre for Mineral and Energy Technology and published by . This book was released on 1987 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microlog Canadian Research Index written by and published by . This book was released on 1988 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: "An index and document delivery service for Canadian report literature".

Download or read book Gold Silver Recovery Innovations written by Randol International Ltd and published by . This book was released on 1989 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Extractive Metallurgy of Gold in South Africa written by G. G. Stanley and published by . This book was released on 1987 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Resin in pulp Programme at Mintek written by and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade Mintek has investigated the feasibility of using resins to recover gold. Work in the area of resin chemistry has progressed from the evaluation of commercial resins to the development of special resins. Laboratory and pilot-plant testwork has resulted in the accumulation of knowledge of the properties of different adsorbents which facilitates the choice of the correct adsorbent for a particular pulp. Methods of elution and recovery of gold from eluates have also received attention at the laboratory and the pilot-plant scale. During the same period engineering expertise developed for uranium-ore processing was adapted for application to gold pulps; and this culminated in the successful operation of a demonstration unit, and the conversion of the Golden Jubilee carbon-in-pulp (CIP) plant to resin-in-pulp (RIP). Case studies drawn from the above work illustrate the attractiveness of the RIP process and the expertise developed during these years which qualifies Mintek to assist gold producers in applying RIP technology.

Download or read book Canadian Metallurgical Quarterly written by and published by . This book was released on 1986 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Small scale Pilot plant Tests on the Resin in pulp Extraction of Gold from Cyanide Media written by and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The results of small-scale resin-in-pulp pilot-plant investigations at Grootvlei Proprietary Mines Ltd, President Brand Gold Mining Co, Ltd, and Western Areas Gold Mine Co, Ltd are reported. At each mine,a pulp was fed simultaneously to a carbon-in-pulp plant, allowing a direct comparison of the metallurgical performance of the two processes. With the Grootvlei pulp, gold was extracted more efficiently by resin than by carbon owing to the low concentration of competing base-metal cyanide complexes in solution. With the Western Areas pulp, the reverse was true because of the the high concentrations of copper and nickel in solution. Finally, with the President Brand pulp, resin-in-pulp was significantly superior to carbon-in-pulp owing mainly to the inherently slow rate of gold extraction from calcine by activated carbon. Results are presented that show the efficiency of the elution of gold and other elements with a variety of reagents from the loaded resins arising from these three campaigns. At Western Areas, a detailed investigation enabled a preliminary cost evaluation to be made of three techniques for the elution of strong-base resins.

Download or read book Advances in Gold Ore Processing written by Mike D. Adams and published by Elsevier. This book was released on 2005-12-02 with total page 1077 pages. Available in PDF, EPUB and Kindle. Book excerpt: The gold processing industry is experiencing change. As free-milling and oxide ores become depleted, more complex polymetallic and refractory ores are being processed, coupled with increasing pressure for stricter environmental compliance. Recent years have also seen a steady reduction in mineral processing and metallurgy graduates and a gradual loss of older operating experience. A contribution to documenting current and future best practice in gold ore processing seems timely. The focus of this volume is on advances in current gold plant operation, from conception to closure; chapters also cover innovations at the bench and pilot-scale level that would be expected to find commercial application at some stage. Sufficient coverage is also given to the chemistry and engineering aspects. The general principle behind the structure of the volume is that of flowsheeting based on unit operations and applied to a mineralogical classification of gold ore types. From concept to closure, this book covers all unit operations, mineralogies and processes that are relevant to dealing with today's complex orebodies. Practical experience is vital to the successful development, operation and closure of any operation. The 42 chapters have been contributed by a total of 66 authors and co-authors who are experts from countries spanning the globe, and representing exhaustive practical knowledge covering many disciplines relevant to gold processing. * Current best practice as elucidated by a select panel of experts in the field* Innovations at the bench and pilot-scale level that would be expected to find commercial application at some stage* Mineralogical-based approach to flowsheeting

Download or read book The Recovery Of Gold From Secondary Sources written by Syed Sabir and published by World Scientific. This book was released on 2016-06-29 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: New discoveries of the properties of gold at a nanoscale, and its effective use in modern technologies, have been driving a virtual 'gold rush'. Depleting natural resources has meant that the recovery of gold continues to grow in importance and relevance.The Recovery of Gold from Secondary Sources analyses the most advanced technology in gold recovery and recycling from spent sources of mobile phones, unwanted electronic equipment and waste materials. State-of-the-art techniques of hydrometallurgical and bio-metallurgical processing, leaching, cementing, adsorbing and separation through bio-sorbents are all described in detail, providing a guide for students and researchers. Discussion of environmentally friendly methods of recovery are presented, in order to provide modern-day alternatives to previous techniques. For those interested in the study of gold recovery this book gives a comprehensive overview of current recovery, making it the ultimate source of information for students, researchers, chemists, metallurgists, environmental scientists and electronic waste recovery experts.

Download or read book Gold and Silver Leaching Practices in the United States written by Peter G. Chamberlain and published by . This book was released on 1984 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Uranium Extraction Technology written by International Atomic Energy Agency and published by . This book was released on 1993 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this publication is to update and expand the first edition, which was published in 1983, and to report on later advances in uranium ore processing. It includes background information about the principles of the unit operations used in uranium ore processing and summarizes the current state of the art. Extensive references provide sources for specific technological details.

Download or read book Gold Ore Processing written by Mike D. Adams and published by Elsevier. This book was released on 2016-05-03 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gold Ore Processing: Project Development and Operations, Second Edition, brings together all the technical aspects relevant to modern gold ore processing, offering a practical perspective that is vital to the successful and responsible development, operation, and closure of any gold ore processing operation. This completely updated edition features coverage of established, newly implemented, and emerging technologies; updated case studies; and additional topics, including automated mineralogy and geometallurgy, cyanide code compliance, recovery of gold from e-waste, handling of gaseous emissions, mercury and arsenic, emerging non-cyanide leaching systems, hydro re-mining, water management, solid–liquid separation, and treatment of challenging ores such as double refractory carbonaceous sulfides. Outlining best practices in gold processing from a variety of perspectives, Gold Ore Processing: Project Development and Operations is a must-have reference for anyone working in the gold industry, including metallurgists, geologists, chemists, mining engineers, and many others. Includes several new chapters presenting established, newly implemented, and emerging technologies in gold ore processing Covers all aspects of gold ore processing, from feasibility and development stages through environmentally responsible operations, to the rehabilitation stage Offers a mineralogy-based approach to gold ore process flowsheet development that has application to multiple ore types

Download or read book Copper Leaching Solvent Extraction and Electrowinning Technology written by Gerald V. Jergensen and published by SME. This book was released on 1999 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume recognizes the growing role of solvent extraction and electrowinning technology in the world copper business. This well-established, remarkable hydrometallurgical achievement fills an important role in our technical ability to extract copper in an efficient and cost-effective way. This proceedings documents the present status of the SX-EW business. It represents a substantial body of historical, scientific, engineering, and commercial information regarding the growth and application of the technology.

Download or read book The Chemistry of Gold Extraction written by John Marsden and published by SME. This book was released on 2006 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensively revised and updated, this edition provides the broad base of knowledge required by all working in the gold extraction and gold processing industries. It bridges the gap between research and industry by emphasizing practical applications of chemical principles and techniques.