Download or read book Evaluation of Prefabricated Composite Steel Box Girder Systems for Rapid Bridge Construction written by Benjamin S. Pavlich and published by . This book was released on 2010 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Life Cycle Analysis and Assessment in Civil Engineering Towards an Integrated Vision written by Robby Caspeele and published by CRC Press. This book was released on 2018-10-31 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at IALCCE2018, the Sixth International Symposium on Life-Cycle Civil Engineering (IALCCE2018), held in Ghent, Belgium, October 28-31, 2018. It consists of a book of extended abstracts and a USB device with full papers including the Fazlur R. Khan lecture, 8 keynote lectures, and 390 technical papers from all over the world. Contributions relate to design, inspection, assessment, maintenance or optimization in the framework of life-cycle analysis of civil engineering structures and infrastructure systems. Life-cycle aspects that are developed and discussed range from structural safety and durability to sustainability, serviceability, robustness and resilience. Applications relate to buildings, bridges and viaducts, highways and runways, tunnels and underground structures, off-shore and marine structures, dams and hydraulic structures, prefabricated design, infrastructure systems, etc. During the IALCCE2018 conference a particular focus is put on the cross-fertilization between different sub-areas of expertise and the development of an overall vision for life-cycle analysis in civil engineering. The aim of the editors is to provide a valuable source of cutting edge information for anyone interested in life-cycle analysis and assessment in civil engineering, including researchers, practising engineers, consultants, contractors, decision makers and representatives from local authorities.
Download or read book Composite Action During Construction of Steel Trapezoidal Box Girder Bridges written by and published by . This book was released on 2005 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: In steel trapezoidal box girder bridge systems, the U-shaped steel girder is designed to act compositely with the concrete deck to form a closed box for live loading. During the construction stage, however, the behavior is not well understood. The usual practice of assuming the system to be non-composite during construction requires substantial top flange bracing to form a quasi-closed box section. Composite box girders with live loading, and girders during construction, have to be evaluated during the design of curved steel trapezoidal box girder bridges. Considering both cases, the design for construction loading is the least understood and is the most important. Stresses due to construction loading can reach up to 60-70 percent of the total design stress for a given cross section. A three-phase study was undertaken to investigate the behavior of curved trapezoidal box girders during construction.
Download or read book Durability of Bridge Structures written by Khaled Mahmoud and published by CRC Press. This book was released on 2013-09-12 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: On Thursday evening, May 23, 2013, the Interstate 5 Bridge over the Skagit River in Washington state collapsed due to impact by an oversize truck, dumping vehicles and people into the water. Fortunately, the bridge is located in a rural area and nobody was killed in the accident, but three people were rescued after their cars plunged into the frigi
- Author : Muayad Whyib Aldoori
- Publisher : Library and Archives Canada = Bibliothèque et Archives Canada
- Release : 2004
- ISBN : 9780612942684
- Pages : 538 pages
Behavior Design and Construction of Horizontally Curved Composite Steel Box Girder Bridges microform
Download or read book Behavior Design and Construction of Horizontally Curved Composite Steel Box Girder Bridges microform written by Muayad Whyib Aldoori and published by Library and Archives Canada = Bibliothèque et Archives Canada. This book was released on 2004 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Horizontally curved girder bridges have been used considerably in recent years in highly congested urban areas. However, although significant research on physical testing and advanced analysis has been underway for the past decade, the practical employment of many recommendations has not been achieved by the engineering community nor have standards reflecting this work been brought into practice. The design process of curved composite bridges involves tracking the stresses and the potential failure change in the girders during erection, construction and service loading stages. For structural safety and serviceability, the designer estimates the stresses induced within the bridge and assure that they do not exceed the applicable specified limit state as required in bridge design standards. However, the designer may be concerned about the level of approximation that is used in his estimate or even the applicability of the underlying theory. To answer this question and provide the designer with more insight into the behavior of the curved bridges, the field testing during construction and service loading of a curved bridge located near Baltimore, Maryland is re-examined here using linear elastic three-dimensional finite element modeling. Comparisons are made between the finite element results and the measured results. Finally, to facilitate the finite element modeling effort for use by a designer, ANSYS Parametric Design Language (APDL) capabilities are used here to develop an analysis/design tool for "Bath-Tub" style curved steel girder bridges. This tool is then used to evaluate the effects of several important design variables on the response and behavior of the girders during the construction phase. This study demonstrates the ability of finite element modeling to assess the stiffness, serviceability performance, buckling behavior and ultimate strength of curved bridges during construction and it is a major step towards a performance based approach to design for stability. The level of safety or reliability that would be available during the erection and the construction processes of horizontally curved girder bridges represents another major concern for the designer. A three span continuous curved box girder bridge in Houston, Texas is used in this study as an example reflecting current detailing and fabricating practice and it is chosen for a detailed evaluation of the structural safety/reliability during the erection and construction process. This task involves simulating the girder erection and concrete slab placement sequence of the bridge using comprehensive nonlinear three dimensional finite element modeling.
Download or read book Precast Segmental Box Girders written by Fadzli Mohamed Nazri and published by Springer. This book was released on 2019-02-09 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the fundamentals of the elastic behaviour of erected precast segmental box girders (SBG) when subjected to static load, as well as the construction process (casting and erection work) involved. It analyzes and compares the experimental results with those obtained using the finite element method and theoretical calculations. A short-term deflection analysis for different loads is obtained by determining the maximum deflection, stress and strain value of single span precast SBG under a variety of transversal slope. The outcome of this work provides a better understanding of the behaviour of precast SBG in terms of structural responses as well as defects, so that maintenance work can then be focused on the critical section at mid span area specifically for the bridge project longitudinally and transversely. The book is of interest to industry professionals involved in conducting static load tests on bridges, and all researchers, designers, and engineers seeking to validate experimental work with numerical and analytical approaches.
Download or read book Engineering for Structural Stability in Bridge Construction written by Federal Highway Federal Highway Administration and published by . This book was released on 2020-07-19 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual is intended to serve as a reference. It will provide technical information which will enable Manual users to perform the following activities:Describe typical erection practices for girder bridge superstructures and recognize critical construction stagesDiscuss typical practices for evaluating structural stability of girder bridge superstructures during early stages of erection and throughout bridge constructionExplain the basic concepts of stability and why it is important in bridge erection* Explain common techniques for performing advanced stability analysis along with their advantages and limitationsDescribe how differing construction sequences effect superstructure stabilityBe able to select appropriate loads, load combinations, and load factors for use in analyzing superstructure components during constructionBe able to analyze bridge members at various stages of erection* Develop erection plans that are safe and economical, and know what information is required and should be a part of those plansDescribe the differences between local, member and global (system) stability
Download or read book Design Guide for Composite Box Girder Bridges written by D. C. Iles and published by . This book was released on 1994 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Accelerated Bridge Construction written by Mohiuddin Ali Khan and published by Elsevier. This book was released on 2014-08-12 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: The traveling public has no patience for prolonged, high cost construction projects. This puts highway construction contractors under intense pressure to minimize traffic disruptions and construction cost. Actively promoted by the Federal Highway Administration, there are hundreds of accelerated bridge construction (ABC) construction programs in the United States, Europe and Japan. Accelerated Bridge Construction: Best Practices and Techniques provides a wide range of construction techniques, processes and technologies designed to maximize bridge construction or reconstruction operations while minimizing project delays and community disruption. Describes design methods for accelerated bridge substructure construction; reducing foundation construction time and methods by using pile bents Explains applications to steel bridges, temporary bridges in place of detours using quick erection and demolition Covers design-build systems' boon to ABC; development of software; use of fiber reinforced polymer (FRP) Includes applications to glulam and sawn lumber bridges, precast concrete bridges, precast joints details; use of lightweight aggregate concrete, aluminum and high-performance steel
Download or read book Design Guide for Composite Box Girder Bridges written by David C. Iles and published by . This book was released on 2004 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inquiry Into the Basis of Design and Method of Erection of Steel Box girder Bridges written by Great Britain. Committee of Inquiry into the Design and Erection of Steel Box Girder Bridges and published by . This book was released on 1973 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prefabricated Bridge Elements and Systems to Limit Traffic Disruption During Construction written by Mohsen Shahawy and published by Transportation Research Board. This book was released on 2003 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Synthesis Report 324: Prefabricated Bridge Elements and Systems to Limit Traffic Disruption During Construction assesses and documents the use of innovative prefabricated elements and systems and assesses its effects on on-site construction time and cost, closure time, and environmental impacts. The synthesis report also looks at the use of fiber-reinforced polymers and other advanced materials and new technologies that are gaining in popularity but are still in the experimental stages.
Download or read book Innovative Bridge Designs for Rapid Renewal written by HNTB Corporation, Genesis Structures Inc, Structural Engineering Associates, and Iowa State University and published by Transportation Research Board. This book was released on with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report from the second Strategic Highway Research Program (SHRP 2), which is administered by the Transportation Research Board of the National Academies, documents the development of standardized approaches to designing and constructing complete bridge systems for rapid renewals.
Download or read book Bridge Launching written by Marco Rosignoli and published by Thomas Telford. This book was released on 2002 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;This book is an essential purchase for all those involved in bridge construction and innovative building techniques, such as bridge owners, design offices, bridge consultants, and construction equipment suppliers."--BOOK JACKET.
Download or read book Steel Box Girder Bridges written by and published by Thomas Telford Publishing. This book was released on 1973 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Segmental and system bridge construction written by Transportation Research Board and published by . This book was released on 1982 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridge Maintenance Safety Management Resilience and Sustainability written by Fabio Biondini and published by CRC Press. This book was released on 2012-06-21 with total page 4119 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridge Maintenance, Safety, Management, Resilience and Sustainability contains the lectures and papers presented at The Sixth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2012), held in Stresa, Lake Maggiore, Italy, 8-12 July, 2012. This volume consists of a book of extended abstracts (800 pp) Extensive collection of revised expert papers on recent advances in bridge maintenance, safety, management and life-cycle performance, representing a major contribution to the knowledge base of all areas of the field.