Download or read book Proceedings of the 2022 Eurasian OpenSees Days written by Fabio Di Trapani and published by Springer Nature. This book was released on 2023-04-19 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest advances, innovations, and applications in the field of structural and geotechnical engineering, as presented by leading international researchers and engineers at the 2nd Eurasian Conference on OpenSees—Open System for Earthquake Engineering Simulation (EOS), held in Turin, Italy, on July 7–8, 2022. The conference was meant to give an overview on the latest developments made with the OpenSees framework as well as to present research and practical outcomes in which OpenSees plays an important role. Conference topics cover cutting-edge applications of OpenSees in the field of structural and geotechnical engineering, the development of new elements and materials, and also the development of new pre- and post-processors. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Download or read book Geotechnical Earthquake Engineering written by Steven L. Kramer and published by CRC Press. This book was released on 2024-11-29 with total page 1061 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully updated second edition provides an introduction to geotechnical earthquake engineering for first-year graduate students in geotechnical or earthquake engineering graduate programs with a level of detail that will also be useful for more advanced students as well as researchers and practitioners. It begins with an introduction to seismology and earthquake ground motions, then presents seismic hazard analysis and performance-based earthquake engineering (PBEE) principles. Dynamic soil properties pertinent to earthquake engineering applications are examined, both to facilitate understanding of soil response to seismic loads and to describe their practical measurement as part of site characterization. These topics are followed by site response and its analysis and soil–structure interaction. Ground failure in the form of soil liquefaction, cyclic softening, surface fault rupture, and seismically induced landslides are also addressed, and the book closes with a chapter on soil improvement and hazard mitigation. The first edition has been widely used around the world by geotechnical engineers as well as many seismologists and structural engineers. The main text of this book and the four appendices: • Cover fundamental concepts in applied seismology, geotechnical engineering, and structural dynamics. • Contain numerous references for further reading, allowing for detailed exploration of background or more advanced material. • Present worked example problems that illustrate the application of key concepts emphasized in the text. • Include chapter summaries that emphasize the most important points. • Present concepts of performance-based earthquake engineering with an emphasis on uncertainty and the types of probabilistic analyses needed to implement PBEE in practice. • Present a broad, interdisciplinary narrative, drawing from the fields of seismology, geotechnical engineering, and structural engineering to facilitate holistic understanding of how geotechnical earthquake engineering is applied in seismic hazard and risk analyses and in seismic design.
Download or read book Bridge Engineering Handbook written by Wai-Fah Chen and published by CRC Press. This book was released on 2019-09-11 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 1999: The Bridge Engineering Handbook is a unique, comprehensive, and state-of-the-art reference work and resource book covering the major areas of bridge engineering with the theme "bridge to the 21st century."
Download or read book Design and Construction of Bridge Approaches written by Harvey E. Wahls and published by Transportation Research Board. This book was released on 1990 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes case histories of the Dumbarton Bridge (San Francisco Bay, Calif.), the Rainier Avenue Embankment (Seattle, Wash.) and the Gallows Road Grade Separation (Fairfax, Va.)
Download or read book Masonry Arch Bridges written by John Page and published by Bernan Press(PA). This book was released on 1993 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masonry arch bridges are an important part of the British road and rail network. There are for instance, about 40,000 road bridges, about 40% of Britain's total bridge stock. The amount of traffic they are now called on to carry has increased enormously since they were built, as has the weight of some of that traffic. Although these bridges have been in existence for thousands of years, research on their structural behaviour is still being carried out and new analytical techniques are being developed.
Download or read book LRFD Guide Specifications for the Design of Pedestrian Bridges written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 2009 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AASHTO Guide Specifications for LRFD Seismic Bridge Design written by and published by AASHTO. This book was released on 2011 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work offers guidance on bridge design for extreme events induced by human beings. This document provides the designer with information on the response of concrete bridge columns subjected to blast loads as well as blast-resistant design and detailing guidelines and analytical models of blast load distribution. The content of this guideline should be considered in situations where resisting blast loads is deemed warranted by the owner or designer.
Download or read book Guide Specifications for Seismic Isolation Design written by and published by AASHTO. This book was released on 2010 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition is based on the work of NCHRP project 20-7, task 262 and updates the 2nd (1999) edition -- P. ix.
Download or read book Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions written by Francesco Silvestri and published by CRC Press. This book was released on 2019-07-19 with total page 7743 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.
Download or read book Bridge Deck Analysis written by Eugene J. Obrien and published by CRC Press. This book was released on 2014-10-06 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Captures Current Developments in Bridge Design and MaintenanceRecent research in bridge design and maintenance has focused on the serviceability problems of older bridges with aging joints. The favored solution of integral construction and design has produced bridges with fewer joints and bearings that require less maintenance and deliver increased
Download or read book Seismic Design and Retrofit of Bridges written by M. J. N. Priestley and published by John Wiley & Sons. This book was released on 1996-04-12 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of their structural simplicity, bridges tend to beparticularly vulnerable to damage and even collapse when subjectedto earthquakes or other forms of seismic activity. Recentearthquakes, such as the ones in Kobe, Japan, and Oakland,California, have led to a heightened awareness of seismic risk andhave revolutionized bridge design and retrofit philosophies. In Seismic Design and Retrofit of Bridges, three of the world's topauthorities on the subject have collaborated to produce the mostexhaustive reference on seismic bridge design currently available.Following a detailed examination of the seismic effects of actualearthquakes on local area bridges, the authors demonstrate designstrategies that will make these and similar structures optimallyresistant to the damaging effects of future seismicdisturbances. Relying heavily on worldwide research associated with recentquakes, Seismic Design and Retrofit of Bridges begins with anin-depth treatment of seismic design philosophy as it applies tobridges. The authors then describe the various geotechnicalconsiderations specific to bridge design, such as soil-structureinteraction and traveling wave effects. Subsequent chapters coverconceptual and actual design of various bridge superstructures, andmodeling and analysis of these structures. As the basis for their design strategies, the authors' focus is onthe widely accepted capacity design approach, in which particularlyvulnerable locations of potentially inelastic flexural deformationare identified and strengthened to accommodate a greater degree ofstress. The text illustrates how accurate application of thecapacity design philosophy to the design of new bridges results instructures that can be expected to survive most earthquakes withonly minor, repairable damage. Because the majority of today's bridges were built before thecapacity design approach was understood, the authors also devoteseveral chapters to the seismic assessment of existing bridges,with the aim of designing and implementing retrofit measures toprotect them against the damaging effects of future earthquakes.These retrofitting techniques, though not considered appropriate inthe design of new bridges, are given considerable emphasis, sincethey currently offer the best solution for the preservation ofthese vital and often historically valued thoroughfares. Practical and applications-oriented, Seismic Design and Retrofit ofBridges is enhanced with over 300 photos and line drawings toillustrate key concepts and detailed design procedures. As the onlytext currently available on the vital topic of seismic bridgedesign, it provides an indispensable reference for civil,structural, and geotechnical engineers, as well as students inrelated engineering courses. A state-of-the-art text on earthquake-proof design and retrofit ofbridges Seismic Design and Retrofit of Bridges fills the urgent need for acomprehensive and up-to-date text on seismic-ally resistant bridgedesign. The authors, all recognized leaders in the field,systematically cover all aspects of bridge design related toseismic resistance for both new and existing bridges. * A complete overview of current design philosophy for bridges,with related seismic and geotechnical considerations * Coverage of conceptual design constraints and their relationshipto current design alternatives * Modeling and analysis of bridge structures * An exhaustive look at common building materials and theirresponse to seismic activity * A hands-on approach to the capacity design process * Use of isolation and dissipation devices in bridge design * Important coverage of seismic assessment and retrofit design ofexisting bridges
Download or read book Bridge Engineering written by W.F. Chen and published by CRC Press. This book was released on 2003-02-27 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mitigating the effects of earthquakes is crucial to bridge design. With chapters culled from the best-selling Bridge Engineering Handbook, this volume sets forth the principles and applications of seismic design, from the necessary geotechnical and dynamic analysis background to seismic isolation and energy dissipation, active control, and retrofit
Download or read book Recent Advances in Structural Engineering Volume 1 written by A. Rama Mohan Rao and published by Springer. This book was released on 2018-08-01 with total page 1137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of select papers presented at the Tenth Structural Engineering Convention 2016 (SEC-2016). It comprises plenary, invited, and contributory papers covering numerous applications from a wide spectrum of areas related to structural engineering. It presents contributions by academics, researchers, and practicing structural engineers addressing analysis and design of concrete and steel structures, computational structural mechanics, new building materials for sustainable construction, mitigation of structures against natural hazards, structural health monitoring, wind and earthquake engineering, vibration control and smart structures, condition assessment and performance evaluation, repair, rehabilitation and retrofit of structures. Also covering advances in construction techniques/ practices, behavior of structures under blast/impact loading, fatigue and fracture, composite materials and structures, and structures for non-conventional energy (wind and solar), it will serve as a valuable resource for researchers, students and practicing engineers alike.
Download or read book Settlement of Bridge Approaches written by J.-L. Briaud and published by . This book was released on 1997 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis will be of interest to state Departments of Transportation (DOTs) geotechnical, structural, roadway design, construction, and maintenance engineers; DOT research staff; and personnel in local transportation agencies. This synthesis describes the current state of the practice for the design, construction, and maintenance of bridge approaches to reduce, eliminate, or compensate for settlement at the bridge/abutment/embankment interface or the bump at the end of the bridge. It discusses the geotechnical and structural engineering design and procedural factors to reduce the bump at the end of the bridge, and includes numerous illustrations. This report of the Transportation Research Board presents data obtained from a review of the literature and a survey of the state DOTs. It is a supplemental update to Synthesis of Highway Practice 159: Design and Construction of Bridge Approaches (1990). The synthesis identifies and describes techniques that have been used to alleviate the problem of the bump at the end of the bridge including the location and cause of settlement and methods used to reduce settlement. In addition, the types of interaction between various divisions of the DOTs in the design, construction, and maintenance of bridge approaches are addressed.
Download or read book Fundamentals of Earthquake Engineering written by Amr Elnashai and published by Wiley. This book was released on 2008-09-12 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Earthquake Engineering combines aspects of engineering seismology, structural and geotechnical earthquake engineering to assemble the vital components required for a deep understanding of response of structures to earthquake ground motion, from the seismic source to the evaluation of actions and deformation required for design. The nature of earthquake risk assessment is inherently multi-disciplinary. Whereas Fundamentals of Earthquake Engineering addresses only structural safety assessment and design, the problem is cast in its appropriate context by relating structural damage states to societal consequences and expectations, through the fundamental response quantities of stiffness, strength and ductility. The book is designed to support graduate teaching and learning, introduce practicing structural and geotechnical engineers to earthquake analysis and design problems, as well as being a reference book for further studies. Fundamentals of Earthquake Engineering includes material on the nature of earthquake sources and mechanisms, various methods for the characterization of earthquake input motion, damage observed in reconnaissance missions, modeling of structures for the purposes of response simulation, definition of performance limit states, structural and architectural systems for optimal seismic response, and action and deformation quantities suitable for design. The accompanying website at www.wiley.com/go/elnashai contains a comprehensive set of slides illustrating the chapters and appendices. A set of problems with solutions and worked-through examples is available from the Wley Editorial team. The book, slides and problem set constitute a tried and tested system for a single-semester graduate course. The approach taken avoids tying the book to a specific regional seismic design code of practice and ensures its global appeal to graduate students and practicing engineers.
Download or read book Foundation Design Principles and Practices written by Donald P. Coduto and published by Pearson Higher Ed. This book was released on 2013-10-03 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: For undergraduate/graduate-level foundation engineering courses. Covers the subject matter thoroughly and systematically, while being easy to read. Emphasizes a thorough understanding of concepts and terms before proceeding with analysis and design, and carefully integrates the principles of foundation engineering with their application to practical design problems.
Download or read book Integral bridges written by George England and published by Thomas Telford Limited. This book was released on 2000-02-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integral Bridges was commissioned by the Highways Agency to produce guidance for bridge designers by addressing the thermally induced soil/structure interaction problem created by environmental changes of temperature and the associated cyclical displacements imposed on the granular backfill to the bridge abutments.
