Download or read book Evaluation and Assessment of As built and Hot Isostatic Press Electron Beam Melted Ti 6Al 4V Failure Location Criterion Employing Fatigue Life Computed Tomography and Digital Image Correlation Methods written by Justin Warner (Mechanical engineer) and published by . This book was released on 2020 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) has proven itself to be an effective and versatile solution in replacing aircraft structures and components. However, the AM process still requires the necessary structural reliability as well as the technology to assess operational longevity. The work presented utilizes digital image correlation (DIC), an optical strain measurement technique, with computed tomography as a method to detect crack initiation sites occurring on the materials surface and propagating throughout the specimen. A comprehensive testing framework and experimental procedure was developed to generate fatigue data for AM electron beam melted (EBM) material Ti-6Al-4V as-built and hot isostatic pressure treated specimens. Characterization and simulation of the fatigue progress due to AM process defects (etc. voids and surface roughness) were also performed using damaging energy progress and damage evaluation. The testing framework was found to be a reliable and effective method for capturing axial hysteresis energy and showed the capability of monitoring fatigue life and can be applied to more complex geometries.
Download or read book Metal Fatigue Effects of Small Defects and Nonmetallic Inclusions written by Yukitaka Murakami and published by Elsevier. This book was released on 2002-04-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal fatigue is an essential consideration for engineers and researchers who are looking at factors that cause metals to fail through stress, corrosion, etc. This is an English translation of a book originally published in Japan in 1993, with an additional two chapters on the fatigue failure of steels and the effect of surface roughness on fatigue strength. The methodology is based on important and reliable results and may be usefully applied to other fatigue problems not directly treated in this book.
Download or read book Advanced Structural Materials written by Winston O. Soboyejo and published by CRC Press. This book was released on 2006-12-21 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: A snapshot of the central ideas used to control fracture properties of engineered structural metallic materials, Advanced Structural Materials: Properties, Design Optimization, and Applications illustrates the critical role that advanced structural metallic materials play in aerospace, biomedical, automotive, sporting goods, and other indust
Download or read book Metal Fatigue in Engineering written by Henry O. Fuchs and published by . This book was released on 1980-06-20 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Optimal Design Mechanical and Structural Systems Edward J. Haug & Jasbir S. Arora This computer-aided design text presents and illustrates techniques for optimizing the design of a wide variety of mechanical and structural systems through the use of nonlinear programming and optimal control theory. A state space method is adopted that incorporates the system model as an integral part of the design formulations. Step-by-step numerical algorithms are given for each method of optimal design. Basic properties of the equations of mechanics are used to carry out design sensitivity analysis and optimization, with numerical efficiency and generality that is in most cases an order of magnitude faster in digital computation than applications using standard nonlinear programming methods. 1979 Optimum Design of Mechanical Elements, 2nd Ed. Ray C. Johnson The two basic optimization techniques, the method of optimal design (MOD) and automated optimal design (AOD), discussed in this valuable work can be applied to the optimal design of mechanical elements commonly found in machinery, mechanisms, mechanical assemblages, products, and structures. The many illustrative examples used to explicate these techniques include such topics as tensile bars, torsion bars, shafts in combined loading, helical and spur gears, helical springs, and hydrostatic journal bearings. The author covers curve fitting, equation simplification, material properties, and failure theories, as well as the effects of manufacturing errors on product performance and the need for a factor of safety in design work. 1980 Globally Optimal Design Douglass J. Wilde Here are new analytic optimization procedures effective where numerical methods either take too long or do not provide correct answers. This book uses mathematics sparingly, proving only results generated by examples. It defines simple design methods guaranteed to give the global, rather than any local, optimum through computations easy enough to be done on a manual calculator. The author confronts realistic situations: determining critical constraints; dealing with negative contributions; handling power function; tackling logarithmic and exponential nonlinearities; coping with standard sizes and indivisible components; and resolving conflicting objectives and logical restrictions. Special mathematical structures are exposed and used to solve design problems. 1978
Download or read book Residual Stresses 2016 written by Thomas M. Holden and published by Materials Research Forum LLC. This book was released on 2017-03-15 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the International Conference on Residual Stresses 10 and is devoted to the prediction/modelling, evaluation, control, and application of residual stresses in engineering materials. New developments, on stress-measurement techniques, on modelling and prediction of residual stresses and on progress made in the fundamental understanding of the relation between the state of residual stress and the material properties, are highlighted. The proceedings offer an overview of the current understanding of the role of residual stresses in materials used in wide ranging application areas.
Download or read book Laser Additive Manufacturing written by Milan Brandt and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Additive Manufacturing: Materials, Design, Technologies, and Applications provides the latest information on this highly efficient method of layer-based manufacturing using metals, plastics, or composite materials. The technology is particularly suitable for the production of complex components with high precision for a range of industries, including aerospace, automotive, and medical engineering. This book provides a comprehensive review of the technology and its range of applications. Part One looks at materials suitable for laser AM processes, with Part Two discussing design strategies for AM. Parts Three and Four review the most widely-used AM technique, powder bed fusion (PBF) and discuss other AM techniques, such as directed energy deposition, sheet lamination, jetting techniques, extrusion techniques, and vat photopolymerization. The final section explores the range of applications of laser AM. Provides a comprehensive one-volume overview of advances in laser additive manufacturing Presents detailed coverage of the latest techniques used for laser additive manufacturing Reviews both established and emerging areas of application
Download or read book Cellular Solids written by Lorna J. Gibson and published by Cambridge University Press. This book was released on 1997 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this new edition of their classic work on Cellular Solids, the authors have brought the book completely up to date, including new work on processing of metallic and ceramic foams and on the mechanical, electrical and acoustic properties of cellular solids. Data for commercially available foams are presented on material property charts; two new case studies show how the charts are used for selection of foams in engineering design. Over 150 references appearing in the literature since the publication of the first edition are cited. The text summarises current understanding of the structure and mechanical behaviour of cellular materials, and the ways in which they can be exploited in engineering design. Cellular solids include engineering honeycombs and foams (which can now be made from polymers, metals, ceramics and composites) as well as natural materials, such as wood, cork and cancellous bone.
Download or read book Additive Manufacturing of Titanium Alloys written by Bhaskar Dutta and published by Butterworth-Heinemann. This book was released on 2016-06-17 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of Titanium Alloys: State of the Art, Challenges and Opportunities provides alternative methods to the conventional approach for the fabrication of the majority of titanium components produced via the cast and wrought technique, a process which involves a considerable amount of expensive machining. In contrast, the Additive Manufacturing (AM) approach allows very close to final part configuration to be directly fabricated minimizing machining cost, while achieving mechanical properties at least at cast and wrought levels. In addition, the book offers the benefit of significant savings through better material utilization for parts with high buy-to-fly ratios (ratio of initial stock mass to final part mass before and after manufacturing). As titanium additive manufacturing has attracted considerable attention from both academicians and technologists, and has already led to many applications in aerospace and terrestrial systems, as well as in the medical industry, this book explores the unique shape making capabilities and attractive mechanical properties which make titanium an ideal material for the additive manufacturing industry. - Includes coverage of the fundamentals of microstructural evolution in titanium alloys - Introduces readers to the various Additive Manufacturing Technologies, such as Powder Bed Fusion (PBF) and Directed Energy Deposition (DED) - Looks at the future of Titanium Additive Manufacturing - Provides a complete review of the science, technology, and applications of Titanium Additive Manufacturing (AM)
Download or read book Metal Additive Manufacturing written by Dyuti Sarker and published by John Wiley & Sons. This book was released on 2021-10-26 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: METAL ADDITIVE MANUFACTURING A comprehensive review of additive manufacturing processes for metallic structures Additive Manufacturing (AM)—also commonly referred to as 3D printing—builds three-dimensional objects by adding materials layer by layer. Recent years have seen unprecedented investment in additive manufacturing research and development by governments and corporations worldwide. This technology has the potential to replace many conventional manufacturing processes, enable the development of new industry practices, and transform the entire manufacturing enterprise. Metal Additive Manufacturing provides an up-to-date review of all essential physics of metal additive manufacturing techniques with emphasis on both laser-based and non-laser-based additive manufacturing processes. This comprehensive volume covers fundamental processes and equipment, governing physics and modelling, design and topology optimization, and more. The text adresses introductory, intermediate, and advanced topics ranging from basic additive manufacturing process classification to practical and material design aspects of additive manufacturability. Written by a panel of expert authors in the field, this authoritative resource: Provides a thorough analysis of AM processes and their theoretical foundations Explains the classification, advantages, and applications of AM processes Describes the equipment required for different AM processes for metallic structures, including laser technologies, positioning devices, feeder and spreader mechanisms, and CAD software Discusses the opportunities, challenges, and current and emerging trends within the field Covers practical considerations, including design for AM, safety, quality assurance, automation, and real-time control of AM processes Includes illustrative cases studies and numerous figures and tables Featuring material drawn from the lead author’s research and professional experience on laser additive manufacturing, Metal Additive Manufacturing is an important source for manufacturing professionals, research and development engineers in the additive industry, and students and researchers involved in mechanical, mechatronics, automatic control, and materials engineering and science.
Download or read book Additive Friction Stir Deposition written by Hang Z. Yu and published by Elsevier. This book was released on 2022-07-19 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Friction Stir Deposition is a comprehensive summary of the state-of-the-art understanding on this emerging solid-state additive manufacturing technology. Sections cover additive friction stir deposition, encompassing advances in processing science, metallurgical science and innovative applications. The book presents a clear description of underlying physical phenomena, shows how the process determines the printing quality, covers resultant microstructure and properties in the as-printed state, highlights its key capabilities and limitations, and explores niche applications in repair, cladding and multi-material 3D printing. Serving as an educational and research guide, this book aims to provide a holistic picture of additive friction stir deposition-based solid-state additive manufacturing as well as a thorough comparison to conventional beam-based metal additive manufacturing, such as powder bed fusion and directed energy deposition. - Provides a clear process description of additive friction stir deposition and highlights key capabilities - Summarizes the current research and application of additive friction stir deposition, including material flow, microstructure evolution, repair and dissimilar material cladding - Discusses future applications and areas of research for this technology
Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.
Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.
Download or read book Three Dimensional Surface Topography written by Ken J Stout and published by Elsevier. This book was released on 2000-06-01 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully illustrated text explains the basic measurement techniques, describes the commercially available instruments and provides an overview of the current perception of 3-D topography analysis in the academic world and industry, and the commonly used 3-D parameters and plots for the characterizing and visualizing 3-D surface topography. It also includes new sections providing full treatment of surface characterization, filtering technology and engineered surfaces, as well as a fully updated bibliography.
Download or read book Degradation of Implant Materials written by Noam Eliaz and published by Springer Science & Business Media. This book was released on 2012-08-21 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the current understanding of the mechanical, chemical and biological processes that are responsible for the degradation of a variety of implant materials. All 18 chapters will be written by internationally renowned experts to address both fundamental and practical aspects of research into the field. Different failure mechanisms such as corrosion, fatigue, and wear will be reviewed, together with experimental techniques for monitoring them, either in vitro or in vivo. Procedures for implant retrieval and analysis will be presented. A variety of biomaterials (stainless steels, titanium and its alloys, nitinol, magnesium alloys, polyethylene, biodegradable polymers, silicone gel, hydrogels, calcium phosphates) and medical devices (orthopedic and dental implants, stents, heart valves, breast implants) will be analyzed in detail. The book will serve as a broad reference source for graduate students and researchers studying biomedicine, corrosion, surface science, and electrochemistry.
Download or read book Characterization of Minerals Metals and Materials 2019 written by Bowen Li and published by Springer. This book was released on 2019-02-13 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Topics covered include characterization methods, ferrous materials, non-ferrous materials, minerals, ceramics, polymer and composites, powders, extraction, microstructure, mechanical behavior, processing, corrosion, welding, solidification, magnetic, electronic, environmental, nano-materials, and advanced materials The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials.
Download or read book Springer Handbook of Mechanical Engineering written by Karl-Heinrich Grote and published by Springer Nature. This book was released on 2020-12-09 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource covers all areas of interest for the practicing engineer as well as for the student at various levels and educational institutions. It features the work of authors from all over the world who have contributed their expertise and support the globally working engineer in finding a solution for today‘s mechanical engineering problems. Each subject is discussed in detail and supported by numerous figures and tables.
Download or read book Characterization of Minerals Metals and Materials 2020 written by Jian Li and published by Springer Nature. This book was released on 2020-01-23 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Topics covered include advanced characterization methods, minerals, mechanical properties, coatings, polymers and composites, corrosion, welding, magnetic materials, and electronic materials. The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials.
