Download or read book Tribology of Miniature Systems written by Z. Rymuza and published by Elsevier. This book was released on 1998-06-01 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tribology of miniature systems is quite different from the tribology of large machinery. This is the first publication to cover on an academic level both the basic concepts of the tribology of miniature systems and some areas of its practical application. A comprehensive survey is given on the specific problems encountered in this field, providing a volume that will be useful in solving professional engineering problems in the fast growing field of precision engineering and microtechnology.The suitability of various materials and lubricants for the tribological systems in miniature mechanisms is discussed. The tribological properties and the friction and wear properties which occur in such systems are analysed. Specific lubrication problems are examined in detail; in particular, the use of special tribological coatings to solve many difficult lubrication problems and to obtain high wear resistance of the rubbing elements is considered. The special investigation techniques used to characterize miniature tribological systems and their elements (e.g. lubricants) are reviewed. The tribological aspects of many of the most common assemblies found in miniature mechanism and electromechanism design are analysed and some practical suggestions are put forward for the rational design of such systems. Also special tribological problems such as those met in computer technology, bioengineering, etc. are presented. The book is intended for tribologists (both seasoned researchers and newcomers) studying the problems of this specific branch of tribology and also for practising engineers active in the design, manufacture and exploitation of various miniature systems.

Download or read book 3rd European Symposium on Engineering Ceramics written by F.L. Riley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the proceedings of the 3rd European Symposium on Engineering Ceramics, held in London, 28-29 November 1989, under the auspices of IBC Technical Services Ltd. The Symposium sessions were chaired by Eric Briscoe, who also introduced the Symposium with the very appropriate review 'Ceramics in Europe'. The term 'engineering ceramics' is commonly taken to mean a group of special high-strength and heat-resistant ceramic materials developed almost exclusively for the advanced internal combustion engine of the next century. It is not always fully appreciated that high grade fine microstructure ceramics both of the oxide and of the non-oxide classes, whether they be termed engineering, fine, special, advanced, structural or technical, have been supporting a large number of diverse and profitable industries over many decades. Indeed, in some respects these materials can be regarded as natural developments from the long established refractories field, and the distinction between an engineering ceramic and a refractory can become blurred, as the contribution in this volume on 'Nitride Bonded Carbide Engineered Ceramics' shows. It is of significance that in Japan, for example, much development work in the engineering ceramics field was initiated by the refractories industries, seeking to diversify possibly but doing so on the basis oflong experience in the refractories area. The main objective of this Symposium was to help engineers and designers to assess the present state of the field of engineering ceramics.

Download or read book Index of Conference Proceedings Received written by British Library. Document Supply Centre and published by . This book was released on 1986 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tribocorrosion of Passive Metals and Coatings written by D Landolt and published by Elsevier. This book was released on 2011-10-12 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribocorrosion causes the degradation or alteration of materials through the combined action of corrosion and wear. It limits the performance and life-time of installations, machines and devices with moving parts, and controls certain manufacturing processes such as chemical–mechanical polishing. The effects of tribocorrosion are most pronounced on passive metals which owe their corrosion resistance to a thin protecting oxide film. Most corrosion-resistant engineering alloys belong to this category.This book provides an introduction to the developing field of tribocorrosion and an overview of the latest research. Part one reviews basic notions of corrosion and tribology, before presenting the most recent results on the growth and structure of passive oxide films. Tribocorrosion mechanisms under fretting, sliding and erosion conditions, respectively, are then discussed. Part two focuses on methods for measuring and preventing tribocorrosion. It includes chapters on electrochemical techniques, the design of tribocorrosion test equipment, data evaluation and the optimisation of materials' properties for tribocorrosion systems. Part three presents a selection of tribocorrosion problems in engineering and medicine. Three chapters address the tribocorrosion of medical implants including test methods and clinical implications. Other chapters examine tribocorrosion issues in nuclear power plants, marine environments, automotive cooling circuits, elevated-temperature metal working and chemical–mechanical polishing.With its distinguished editors and international team of expert contributors Tribocorrosion of passive metals and coatings is an invaluable reference tool for engineers and researchers in industry and academia confronted with tribocorrosion problems. - Comprehensively reviews current research on the tribocorrosion of passive metals and coatings, with particular reference to the design of tribocorrosion test equipment, data evaluation and the optimisation of materials' properties for tribocorrosion systems - Chapters discuss tribocorrosion mechanisms under fretting, sliding and erosion conditions before focussing on methods for measuring and preventing tribocorrosion - Includes a comprehensive selection of tribocorrosion problems in engineering and medicine, such as the tribocorrosion of medical implants, and tribocorrosion issues in nuclear power plants, marine environments, automotive cooling circuits and elevated-temperature metal working

Download or read book Special Report written by and published by . This book was released on 1993 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Developments in Numerical and Experimental Methods Applied to Tribology written by D. Dowson and published by Elsevier. This book was released on 2014-05-20 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Numerical and Experimental Methods Applied to Tribology contains the proceedings of the 10th Leeds-Lyon Symposium on Tribology held at the Institut National des Sciences Appliquées in Lyon, France, on September 6-9, 1983. The papers explore developments in numerical and experimental methods used in tribology and cover topics ranging from ferrography and rheology to bearings and bearing dynamics, hydrodynamics, contact phenomena, and plasticity. The papers are organized into 13 sessions. The first two papers examine the use of ferrography in the analysis of non-ferrous particles as well as some of the methods of obtaining approximate numerical solutions to boundary-value problems that arise in elastohydrodynamic lubrication. The next session is concerned with rheology and contains papers that describe numerical solutions for power law fluids as applied to slider bearings; grease lubricated finite length bearings; and the use of the ball bearing as rheological test device. The papers that follow discuss bearings and their dynamics, oil films on lubricated surfaces, hydrodynamic lubrication, and finite element analysis of transient elastohydrodynamic lubrication. The final session considers plastic deformation, two body abrasion processes, and micropitting and asperity deformation. This monograph will appeal to tribologists.

Download or read book Scratching of Materials and Applications written by Sujeet K. Kumar Sinha and published by Elsevier. This book was released on 2006-09-29 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface characterizations of engineering materials effects their scratch/abrasion/Mar resistance, coating adhesion/strength, and abrasive wear mechanism. Scratching of Materials and Applications has chapters devoted to direct industrial application and contains some of the important works that are being conducted. Scratch testing of materials has grown extensively since the earlier days of the Mohs Scale for ranking minerals according to their relative scratch resistance. This test has been used on metals, ceramics, glasses, polymers and coatings of various types and thicknesses.The chapters are grouped according to the type of the engineering materials used. The beginning chapters relate mostly to bulk polymers, which are followed by different types of coatings (hard wear resistant to the diamond-like carbon coatings) and finally, chapters on the application of scratching technique to metals and ceramics are included at the end of the book. Thus, the book covers a fairly wide spectrum of engineering materials which are useful to engineers and researchers.* Balances theoretical science with practical application* Demonstrates real-life applications within industry* Written experts in the fields of materials, tribology and surface mechanics

Download or read book Transport Phenomena in Food Processing First International Conference Proceedings written by Selcuk Guceri and published by CRC Press. This book was released on 1992-11-30 with total page 1618 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1988-07 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials Modification by High fluence Ion Beams written by Roger Kelly and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute on Materials Modification by High-Fluence Ion Beams, Viana do Castelo, Portugal, August 24-September 4, 1987

Download or read book Interface Dynamics written by D. Berthe and published by Elsevier. This book was released on 1988-09-01 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many tribologists are today not only explicitly concerned with interface action but also with interface composition. This proceedings volume presents a timely review on topics ranging from interface dynamics to interface elimination, covering all factors such as contact stress fields, interface rheology, and boundary slip, that control the passage from formation to elimination. The volume contains 45 papers divided into 13 sessions, that were presented at the symposium.

Download or read book Metal Forming Science and Practice written by J.G. Lenard and published by Elsevier. This book was released on 2002-10-08 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication has been written to honour the contribution to science and education made by the Distinguished Professor Emeritus Professor Schey on his eightieth birthday. The contributors to his book are among the countless researchers who have read, studied and learned from Professor Schey's work, which includes books, research monographs, invited papers, keynote papers, scientific journals and conferences. The topics include manufacturing, sheet and bulk metal forming and tribology, amongst others. The topics included in this book include: John Schey and value-added manufacturing; Surface finish and friction in cold-metal rolling; Direct observation of interface for tribology in metal forming; An examination of the coefficient of friction; Studies on micro plasto hydrodynamic lubrication in metal forming; Numerical simulation of sheet metal forming; Geometric and mechanics model of sheet forming; Modelling and optimisation of metal forming processes; The mathematical modelling of hot rolling steel; Identification of rheological and tribological parameters; Oxide behaviour in hot rolling; Friction, lubrication and surface response in wire drawing; and Modelling and control of temper rolling and skin pass rolling.

Download or read book Hot Isostatic Pressing 93 written by L. Delaey and published by Newnes. This book was released on 2012-12-02 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various topics related to Hot Isostatic Pressing are presented in this volume. As well as papers on more general aspects of HIPing, the papers are organised into four groups: metals and alloys, ceramics, HIP-engineering, and HIP-fundamentals. Castings, powder metallurgy, intermetallics, surface engineering and diffusion bounding are covered in the first group. The papers on ceramics give special attention to HIPing of structural and functional ceramics as well as to ceramic composites. Some interesting HIP-engineering innovations are presented on HIP equipment and HIP-technology. The papers which discuss HIP-fundamentals focus around materials modelling and component modelling.

Download or read book Directory of Published Proceedings written by and published by . This book was released on 1991 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1993 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plastics for Corrosion Inhibition written by V.A. Goldade and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the key problems of failure-free operation of machinery is prevention of corrosion. The global scale of modern production makes this problem even more critical. At the beginning of the 21st century industrial contami- tion and the corrosion-active nature of the environment reached a level such that corrosive damage of materials became commensurate with their prod- tion volume and expenditure on anticorrosion protection of machines became comparable with investments in basic production. Anticorrosion techniques changed from being an auxiliary service to industrial enterprises into a dev- oping, scienti?cally intensive and generously ?nanced branch of production. Polymers occupy a very speci?c place amongst anticorrosion techniques. Polymers combine good chemical resistance with impermeability to di?- ent media and unusual deformation characteristics. The main principle of their application as anticorrosion means is the creation of a tight barrier that insulates metal machine parts or constructions from corrosion agents. The advantages of polymers allow the creation of such a barrier at minimal cost,providingprotectionoftheworkingmachinesfromcorrosion,combining their manufacture with preservation and decreasing the cost of anticorrosion. This is one of the main reasons why world production of polymer materials increased by almost 50% in the past decade.

Download or read book Surface Engineering written by Ken N. Strafford and published by Routledge. This book was released on 2018-12-12 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Engineering: Processes and Applications: This volume covers both innovative and basic methods of surface engineering for improved surface properties.