Download or read book Eurocode 2 Design of Concrete Structures Part 4 Design of Fastenings for Use in Concrete written by Singapore Standards Council and published by . This book was released on 2021 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PN EN 1992 4 written by Polski Komitet Normalizacyjny and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Singapore National Annex to Eurocode 2 written by Singapore Standards Council and published by . This book was released on 2021 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Fastenings for Use in Concrete written by Rainer Mallée and published by John Wiley & Sons. This book was released on 2013-04-05 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European pre-standard CEN/TS 1992-4 for the design of fastenings by means of headed studs, anchor channels as well as post-installed mechanical and chemical anchors is ready for use. The background and interpretation of the provisions related to the determination of actions and resistances based on limit state design, durability, fire resistance, fatigue and earthquake actions as required by CEN/TS 1992 are described in detail. Selected chapters from the German concrete yearbook are now being published in the new English "Beton-Kalender Series" for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn "Beton-Kalender" has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in "ferro-concrete" structures until - as the book's first editor, Fritz von Emperger (1862-1942), expressed it - the "tempestuous development" in this form of construction came to an end. However, the "Beton-Kalender" quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since.
Download or read book Design of anchorages in concrete written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2011-01-01 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the widespread use of cast-in-place and post-installed anchors in construction, the overall level of understanding in the engineering community regarding their behaviour remains quite limited. Furthermore, since the publication of the original CEB design guide, “Design of Fastenings in Concrete”, ongoing research and additional application experience has led to an improved understanding and deepened knowledge in various areas of fastening technology. fib Bulletin 58 therefore represents a substantial revision of the original 1997 guide. It addresses a variety of loading types and failure modes and takes into account the current state of the art for anchorages in new construction as well as for their use in the repair and strengthening of existing concrete structures. fib Bulletin 58 provides a method for the design of the anchorage and additional rules for the design of the concrete member to which the load is transferred. The specified provisions are based on the currently available research.
Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2014-08-21 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy saving building components.
Download or read book Materials for Architects and Builders written by Arthur R. Lyons and published by Routledge. This book was released on 2010 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bricks and brickwork; Blocks and blockwork; Lime, cement and concrete; Timber and timber products; Ferrous and non-ferrous metals; Bitumen and flat roofing materials; Glass; Ceramic materials; Stone and cast stone; Plastics; Glass-fibre reinforced plastics, cement and gypsum; Plaster and board materials; Insulation materials; Sealants, gaskets and adhesives; Paints, wood stains, varnishes and colour; Energy-saving materials and componets; Recycled and ecological materials; Sustainability
Download or read book CONCRETE Innovations in Materials Design and Structures written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2019-05-27 with total page 2322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings contains the papers of the fib Symposium “CONCRETE Innovations in Materials, Design and Structures”, which was held in May 2019 in Kraków, Poland. This annual symposium was co-organised by the Cracow University of Technology. The topics covered include Analysis and Design, Sustainability, Durability, Structures, Materials, and Prefabrication. The fib, Fédération internationale du béton, is a not-for-profit association formed by 45 national member groups and approximately 1000 corporate and individual members. The fib’s mission is to develop at an international level the study of scientific and practical matters capable of advancing the technical, economic, aesthetic and environmental performance of concrete construction. The fib, was formed in 1998 by the merger of the Euro-International Committee for Concrete (the CEB) and the International Federation for Prestressing (the FIP). These predecessor organizations existed independently since 1953 and 1952, respectively.
Download or read book A State of the Art Guide for Post Installed Reinforcement written by Daniel TW Looi and published by Sunway University Press. This book was released on 2022-07-22 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: A State-of-the-Art Guide for Post-Installed Reinforcement provides comprehensive coverage on installation, design, and assessment guidelines for post-installed reinforcements, a unique technology used very commonly in the construction industry. Previously published in Hong Kong, this Malaysian edition includes new EOTA technical reports and European Assessment Documents, fundamentals for post-installed reinforcements, design proposals, as well as unique design examples, all of which is specifically tailored for the Malaysian context.
Download or read book Precast Concrete Structures written by Alfred Steinle and published by John Wiley & Sons. This book was released on 2019-01-28 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building with precast concrete elements is one of the most innovative forms of construction. This book serves as an introduction to this topic, including examples, and thus supplies all the information necessary for conceptual and detailed design.
Download or read book Composite Construction in Steel and Concrete 9 written by Markus Knobloch and published by John Wiley & Sons. This book was released on 2024-09-03 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Construction in Steel and Concrete IX The highly successful International Conference series on Composite Construction in Steel and Concrete is a major forum for researchers, practitioners, and engineers to share and discuss their research, practical experience and innovations related to composite constructions in steel and concrete. Composite Construction is a key consideration in the design of buildings and infrastructure. Significant advances in research and development have increased the knowledge of the structural performance of composite structures. Some areas are becoming well understood and implemented in the design practice, codes and standards worldwide, while others like, e.g., application of high-performance materials or dismountable and reusable composite members need further studies; trends that are reflected by the conference papers. The 62 contributions contained in this book cover a wide variety of topics, including composite beams, composite columns, composite decks, joints, shear connections, fire behavior, seismic behavior, fatigue and fracture, codification, composite bridges, innovative hybrid structures, numerical investigations and practical applications. The Papers are peer-reviewed by the Scientific Board and may be adapted based on the outcome of the discussions during the conference. This book therefore summarizes the state-of-the-art in composite construction worldwide, as presented at the 9th International Conference on Composite Construction in Steel and Concrete hosted by the Ruhr-Universität Bochum, University of Stuttgart, RPTU Kaiserslautern-Landau and University of Luxembourg, representing the work of authors from 18 countries.
Download or read book Design of Steel Structures for Buildings in Seismic Areas written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2018-01-03 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume elucidates the design criteria and principles for steel structures under seismic loads according to Eurocode 8-1. Worked Examples illustrate the application of the design rules. Two case studies serve as best-practice samples.
Download or read book Anchorage in Concrete Construction written by Rolf Eligehausen and published by John Wiley & Sons. This book was released on 2013-10-30 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Das Buch stellt den aktuellen Stand der kompletten Befestigungstechnik für Beton und Mauerwerk mit Einlegeteilen (Ankerschienen, Kopfbolzen), Dübeln (Metallspreizdübel, Hinterschnittdübel, Verbunddübel, Betonschrauben, Kunststoffdübel) und Setzbolzen umfassend dar. Die Befestigungselemente und ihre Wirkungsmechanismen werden ausführlich beschrieben und das Tragverhalten im ungerissenen und gerissenen Beton untersucht. Weiterhin werden das Korrosionsverhalten, das Verhalten bei Brandbeanspruchung sowie bei Erdbeben- und Schockbeanspruchung behandelt. Von besonderer internationaler Aktualität ist die Bemessung gemäß der europäischen und amerikanischen Normung. Praxisorientierte Kriterien zur Auswahl von Befestigungsmitteln und Bemessungsbeispiele runden das Werk zu einem einzigartigen Handbuch ab.
Download or read book Structural Analysis of Historical Constructions written by Rafael Aguilar and published by Springer. This book was released on 2018-08-18 with total page 2518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 11th International Conference on Structural Analysis of Historical Constructions (SAHC) that was held in Cusco, Peru in 2018. It disseminates recent advances in the areas related to the structural analysis of historical and archaeological constructions. The challenges faced in this field show that accuracy and robustness of results rely heavily on an interdisciplinary approach, where different areas of expertise from managers, practitioners, and scientists work together. Bearing this in mind, SAHC 2018 stimulated discussion on the new knowledge developed in the different disciplines involved in analysis, conservation, retrofit, and management of existing constructions. This book is organized according to the following topics: assessment and intervention of archaeological heritage, history of construction and building technology, advances in inspection and NDT, innovations in field and laboratory testing applied to historical construction and heritage, new technologies and techniques, risk and vulnerability assessments of heritage for multiple types of hazards, repair, strengthening, and retrofit of historical structures, numerical modeling and structural analysis, structural health monitoring, durability and sustainability, management and conservation strategies for heritage structures, and interdisciplinary projects and case studies. This volume holds particular interest for all the community interested in the challenging task of preserving existing constructions, enable great opportunities, and also uncover new challenges in the field of structural analysis of historical and archeological constructions.
Download or read book 18th International Probabilistic Workshop written by José C. Matos and published by Springer Nature. This book was released on 2021-05-07 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the proceedings of the 18th International Probabilistic Workshop (IPW), which was held in Guimarães, Portugal in May 2021. Probabilistic methods are currently of crucial importance for research and developments in the field of engineering, which face challenges presented by new materials and technologies and rapidly changing societal needs and values. Contemporary needs related to, for example, performance-based design, service-life design, life-cycle analysis, product optimization, assessment of existing structures and structural robustness give rise to new developments as well as accurate and practically applicable probabilistic and statistical engineering methods to support these developments. These proceedings are a valuable resource for anyone interested in contemporary developments in the field of probabilistic engineering applications.
Download or read book Design of fastenings in concrete draft CEB guide part 1 to 3 fastenings for seismic retrofitting state of the art report on design and application written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1995-08-01 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Life Cycle of Structures and Infrastructure Systems written by Fabio Biondini and published by CRC Press. This book was released on 2023-06-28 with total page 6293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Life-Cycle of Structures and Infrastructure Systems contains the lectures and papers presented at IALCCE 2023- The Eighth International Symposium on Life-Cycle Civil Engineering, held at Politecnico di Milano, Milan, Italy, 2-6 July, 2023. This book contains the full papers of 514 contributions presented at IALCCE 2023, including the Fazlur R. Khan Plenary Lecture, nine Keynote Lectures, and 504 technical papers from 45 countries. The papers cover recent advances and cutting-edge research in the field of life-cycle civil engineering, including emerging concepts and innovative applications related to life-cycle design, assessment, inspection, monitoring, repair, maintenance, rehabilitation, and management of structures and infrastructure systems under uncertainty. Major topics covered include life-cycle safety, reliability, risk, resilience and sustainability, life-cycle damaging processes, life-cycle design and assessment, life-cycle inspection and monitoring, life-cycle maintenance and management, life-cycle performance of special structures, life-cycle cost of structures and infrastructure systems, and life-cycle-oriented computational tools, among others. This Open Access Book provides both an up-to-date overview of the field of life-cycle civil engineering and significant contributions to the process of making more rational decisions to mitigate the life-cycle risk and improve the life-cycle reliability, resilience, and sustainability of structures and infrastructure systems exposed to multiple natural and human-made hazards in a changing climate. It will serve as a valuable reference to all concerned with life-cycle of civil engineering systems, including students, researchers, practicioners, consultants, contractors, decision makers, and representatives of managing bodies and public authorities from all branches of civil engineering.
