Download or read book Superconducting Accelerator Magnets written by K.-H. Mess and published by World Scientific. This book was released on 1996 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main topic of the book are the superconducting dipole and quadrupole magnets needed in high-energy accelerators and storage rings for protons, antiprotons or heavy ions. The basic principles of low-temperature superconductivity are outlined with special emphasis on the effects which are relevant for accelerator magnets. Properties and fabrication methods of practical superconductors are described. Analytical methods for field calculation and multipole expansion are presented for coils without and with iron yoke. The effect of yoke saturation and geometric distortions on field quality is studied. Persistent magnetization currents in the superconductor and eddy currents the copper part of the cable are analyzed in detail and their influence on field quality and magnet performance is investigated. Superconductor stability, quench origins and propagation and magnet protection are addressed. Some important concepts of accelerator physics are introduced which are needed to appreciate the demanding requirements on field quality in large storage rings. The operational experience with the superconducting HERA collider serves as an illustration. Finally superconducting correction coils and practical construction and fabrication methods of accelerator magnets are discussed. The physical and technical principles described in the book are substantiated with a wealth of experimental data on multipoles, persistent- and eddy-current effects, quench performance and much more.
Download or read book Nb3Sn Accelerator Magnets written by Alexander V Zlobin and published by . This book was released on 2020-10-08 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book is written by world-recognized experts in the fields of applied superconductivity and superconducting accelerator magnet technologies. It provides a contemporary review and assessment of the experience in research and development of high-field accelerator dipole magnets based on Nb3Sn superconductor over the past five decades. The reader attains clear insight into the development and the main properties of Nb3Sn composite superconducting wires and Rutherford cables, and details of accelerator dipole designs, technologies and performance. Special attention is given to innovative features of the developed Nb3Sn magnets. The book concludes with a discussion of accelerator magnet needs for future circular colliders.; Broadens our understanding of design and performance limits of high-field Nb3Sn accelerator magnets for a future very high energy hadron collider Offers beginners a concise overview of the relevant design concepts for a new generation of superconducting accelerator magnets based on Nb3Sn superconductor Illustrates the complete process of accelerator magnet design and fabrication Provides a contemporary review and assessment of the past experience with Nb3Sn high-field dipole accelerator magnets Identifies the main open R&D issues for Nb3Sn high-field dipole magnets This work was published by Saint Philip Street Press pursuant to a Creative Commons license permitting commercial use. All rights not granted by the work's license are retained by the author or authors.
Download or read book Nanoscience and Engineering in Superconductivity written by Victor Moshchalkov and published by Springer Science & Business Media. This book was released on 2010-11-10 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: For emerging energy saving technologies superconducting materials with superior performance are needed. Such materials can be developed by manipulating the "elementary building blocks" through nanostructuring. For superconductivity the "elementary blocks" are Cooper pair and fluxon (vortex). This book presents new ways how to modify superconductivity and vortex matter through nanostructuring and the use of nanoscale magnetic templates. The basic nano-effects, vortex and vortex-antivortex patterns, vortex dynamics, Josephson phenomena, critical currents, and interplay between superconductivity and ferromagnetism at the nanoscale are discussed. Potential applications of nanostructured superconductors are also presented in the book.
Download or read book The Global Technology Revolution 2020 In Depth Analyses Bio Nano Materials Information Trends Drivers Barriers and Social Implications written by Richard Silberglitt and published by Rand Corporation. This book was released on 2002-08-30 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2020, areas of particular importance for technology trends will include biotechnology, nanotechnology, materials technology, and information technology. This report, the companion document to The Global Technology Revolution 2020, Executive Summary (Silberglitt et al., MG-475-NIC, 2006), assesses in detail a sample of 29 countries with respect to their ability to acquire and implement 16 key technology applications.
Download or read book LHC Design Report written by and published by . This book was released on 2004 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science and Application of Nanotubes written by D. Tománek and published by Springer Science & Business Media. This book was released on 2005-12-17 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series of books, which is published at the rate of about one per year, addresses fundamental problems in materials science. The contents cover a broad range of topics from small clusters of atoms to engineering materials and involve chemistry, physics, materials science, and engineering, with length scales ranging from Ångstroms up to millimeters. The emphasis is on basic science rather than on applications. Each book focuses on a single area of current interest and brings together leading experts to give an up-to-date discussion of their work and the work of others. Each article contains enough references that the interested reader can access the relevant literature. Thanks are given to the Center for Fundamental Materials Research at Michigan State University for supporting this series. M. F. Thorpe, Series Editor E-mail: thorpe@pa. msu. edu East Lansing, Michigan V PREFACE It is hard to believe that not quite ten years ago, namely in 1991, nanotubes of carbon were discovered by Sumio Iijima in deposits on the electrodes of the same carbon arc apparatus that was used to produce fullerenes such as the “buckyball”. Nanotubes of carbon or other materials, consisting ofhollow cylinders that are only a few nanometers in diameter, yet up to millimeters long, are amazing structures that self-assemble under extreme conditions. Their quasi-one-dimensional character and virtual absence of atomic defects give rise to a plethora of unusual phenomena.
Download or read book Magneto Optical Imaging written by Tom H. Johansen and published by Springer Science & Business Media. This book was released on 2004-05-31 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magneto-Optical Imaging has developed rapidly over the last decade to emerge as a leading technique to directly visualise the static and dynamic magnetic behaviour of materials, capable of following magnetic processes on the scale of centimeters to sub-microns and at timescales from hours to nanoseconds. The images are direct, real-time, and give space-resolved information, such as ultrafast magnetic processes and revealing the motion of individual vortices in superconductors. The book is a fully up-to-date report of the present status of the technique.
Download or read book The Media Lab written by Stewart Brand and published by Penguin Group. This book was released on 1989 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Personalized newspapers, life-sized holograms, telephones that chat with callers, these are all projects that are being developed at MIT's Media Lab. Brand explores the exciting programs, and gives readers a look at the future of communications.
Download or read book High Luminosity Large Hadron Collider HL LHC written by G.. Apollinari and published by . This book was released on 2017 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Superconductivity 2 written by Anant V. Narlikar and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: In contrast to research on the fundamental mechanisms of High-Temperature Superconductivity, in recent years we have seen enormous developments in the fabrication and application of High-Tc-superconductors. The two volumes of High Temperature Superconductivity provide a survey of the state of the technology and engineering applications of these materials. They comprise extended original research papers and technical review articles written by physicists, chemists, materials scientists and engineers, all of them noted experts in their fields. The interdisciplinary and strictly application-oriented coverage should benefit graduate students and academic researchers in the mentioned areas as well as industrial experts. Volume 1 "Materials" focuses on major technical advancements in High-Tc materials processing for applications. Volume 2 "Engineering Applications" covers numerous application areas where High-Tc superconductors are making tremendous impact.
Download or read book Space Microelectronics written by and published by . This book was released on 1997 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integrated Circuit Processes written by and published by . This book was released on 1975 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Illio written by and published by . This book was released on 1911 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Xenes written by Alessandro Molle and published by Elsevier. This book was released on 2022-07-04 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Xenes: 2D Synthetic Materials Beyond Graphene includes all the relevant information about Xenes thus far reported, focusing on emerging materials and new trends. The book's primary goal is to include full descriptions of each Xene type by leading experts in the area. Each chapter will provide key principles, theories, methods, experiments and potential applications. The book also reviews the key challenges for synthetic 2D materials such as characterization, modeling, synthesis, and integration strategies. This comprehensive book is suitable for materials scientists and engineers, physicists and chemists working in academia and R&D in industry. The discovery of silicene dates back to 2012. Since then, other Xenes were subsequently created with synthetic methods. The portfolio of Xenes includes different chemical elements of the periodic table and hence the related honeycomb-like lattices show a wealth of electronic and optical properties that can be successfully exploited for applications. Introduces the most important Xenes, including silicene, germanene, borophene, gallenene, phosphorene, and more Provides the fundamental principles, theories, experiments and applications for the most relevant synthetic 2D materials Addresses techniques for the characterization, synthesis and integration of synthetic 2D materials
Download or read book World Directory of Crystallographers written by Yves Epelboin and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 10th edition of the World Directory of Crystallographers and of Other Scientists Employing Crystallographic Methods is a revised and up-to-date edition of the World Directory and contains the current addresses, academic status and research interests of over 8000 scientists in 74 countries. It is produced directly from the regularly updated electronic World Directory database, which is accessible via the World-Wide Web. Full details of the database are given in an Annex to the printed edition.
Download or read book Cryogenic Engineering written by Klaus D. Timmerhaus and published by Springer Science & Business Media. This book was released on 2007-11-12 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a benchmark reference work on Cryogenic Engineering which chronicles the major developments in the field. Starting with an historical background, this book reviews the development of data resources now available for cryogenic fields and properties of materials. It presents the latest changes in cryopreservation and the advances over the past 50 years. The book also highlights an exceptional reference listing to provide referral to more details.
Download or read book Frontiers in Superconducting Materials written by Vladimir Matias and published by . This book was released on 2004 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
