Download or read book Etude exp rimentale de cas d interaction dynamique sol structure written by Jean Emm.. Kyrgeorgiou and published by . This book was released on 1979 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dynamique Non lin aire Et Le Chaos written by and published by . This book was released on 1993 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Human Behavior and Environment written by Irwin Altman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers comprising this second volume of Human Behavior and the Environment represent, as do their predecessors, a cross section of current work in the broad area of problems dealing with interrelation ships between the physical environment and human behavior, at both the individual and the aggregate levels. Considering the two volumes as a unit, we have included papers covering a broad spectrum of problems ranging from the theoretical to the applied, and from the disciplinary-based to the interdisciplinary and professional. Approxi mately half of the papers are written by psychologists, with the remainder coming, in part, from such other disciplines as sociology, geography, and from such diverse applied and professional fields as natural recreation, landscape architecture, urban planning, and opera tions research. The volumes thus provide an overview of work on current topical problems. Yet, as the field is developing, specialization is inevitably increasing apace, and the editors as well as the publisher have become convinced of the desirability for futu're volumes in this series to be organized along topical lines, with successive volumes devoted to different aspects of this rather sprawling field. Thus, Volume 3, currently in the planning stage, will be devoted exclusively to the interaction of children with the physical environment, considered from diverse viewpoints, again including authors from diverse fields of specialization.

Download or read book Wafer Bonding written by Marin Alexe and published by Springer Science & Business Media. This book was released on 2004-05-14 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade direct wafer bonding has developed into a mature materials integration technology. This book presents state-of-the-art reviews of the most important applications of wafer bonding written by experts from industry and academia. The topics include bonding-based fabrication methods of silicon-on-insulator, photonic crystals, VCSELs, SiGe-based FETs, MEMS together with hybrid integration and laser lift-off. The non-specialist will learn about the basics of wafer bonding and its various application areas, while the researcher in the field will find up-to-date information about this fast-moving area, including relevant patent information.

Download or read book Connections in Steel Structures written by R. Bjorhovde and published by CRC Press. This book was released on 1988-02-19 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the Proceedings of a State-of-the-Art Workshop on Connenctions and the Behaviour, Strength and Design of Steel Structures held at Laboratoire de Mecanique et Technologie, Ecole Normale, Cachan France from 25th to 27th May 1987. It contains the papers presented at the above proceedings and is split into eight main sections covering: Local Analysis of Joints, Mathematical Models, Classification, Frame Analysis, Frame Stability and Simplified Methods, Design Requirements, Data Base Organisation, Research and Development Needs. With papers from 50 international contributors this text will provide essential reading for all those involved with steel structures.

Download or read book Rheological Fundamentals of Polymer Processing written by J.A. Covas and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experts in rheology and polymer processing present up-to-date, fundamental and applied information on the rheological properties of polymers, in particular those relevant to processing, contributing to the physical understanding and the mathematical modelling of polymer processing sequences. Basic concepts of non-Newtonian fluid mechanics, micro-rheological modelling and constitutive modelling are reviewed, and rheological measurements are described. Topics with practical relevance are debated, such as linear viscoelasticity, converging and diverging flows, and the rheology of multiphase systems. Approximation methods are discussed for the computer modelling of polymer melt flow. Subsequently, polymer processing technologies are studied from both simulation and engineering perspectives. Mixing, crystallization and reactive processing aspects are also included. Audience: An integrated and complete view of polymer processing and rheology, important to institutions and individuals engaged in the characterisation, testing, compounding, modification and processing of polymeric materials. Can also support academic polymer processing engineering programs.

Download or read book Structure and Properties of Liquid Crystals written by Lev M. Blinov and published by Springer Science & Business Media. This book was released on 2010-10-26 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book by Lev M. Blinov is ideal to guide researchers from their very first encounter with liquid crystals to the level where they can perform independent experiments on liquid crystals with a thorough understanding of their behaviour also in relation to the theoretical framework. Liquid crystals can be found everywhere around us. They are used in virtually every display device, whether it is for domestic appliances of for specialized technological instruments. Their finely tunable optical properties make them suitable also for thermo-sensing and laser technologies. There are many monographs written by prominent scholars on the subject of liquid crystals. The majority of them presents the subject in great depth, sometimes focusing on a particular research aspect, and in general they require a significant level of prior knowledge. In contrast, this books aims at an audience of advanced undergraduate and graduate students in physics, chemistry and materials science. The book consists of three parts: the first part, on structure, starts from the fundamental principles underlying the structure of liquid crystals, their rich phase behaviour and the methods used to study them; the second part, on physical properties, emphasizes the influence of anisotropy on all aspects of liquid crystals behaviour; the third, focuses on electro-optics, the most important properties from the applications standpoint. This part covers only the main effects and illustrates the underlying principles in greater detail. Professor Lev M. Blinov has had a long carrier as an experimentalist. He made major contributions in the field of ferroelectric mesophases. In 1985 he received the USSR state prize for investigations of electro-optical effects in liquid crystals for spatial light modulators. In 1999 he was awarded the Frederiks medal of the Soviet Liquid Crystal Society and in 2000 he was honoured with the G. Gray silver medal of the British Liquid Crystal Society. He has held many visiting academic positions in universities and laboratories across Europe and in Japan.

Download or read book Adhesion Between Polymers and Concrete Adh sion Entre Polym res Et B ton written by H. R. Sasse and published by Springer. This book was released on 1986 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface Adhesion is a phenomenon architects and civil engineers are not very familiar with. In other disciplines knowledge about surface properties and the background of bonding energies is also far from satisfactory; nevertheless there are many important· applications in concrete engineering, where adhesion is necessary for success and durability. These include: - coating and painting - repair of concrete surfaces - bonding of fresh to old concrete - crack injection - glueing of precast elements - glueing of steel to concrete, etc. In 1981 RILEM established the technical committee 52-RAC 'Resin Adherence to Concrete'. The main aims of the committee's work were - to collect research results and practical experiences - to initiate and coordinate research programs - to develop, on a scientific base, test methods for field and for laboratory purposes. One of the results of the committee's work is a state-of-the-art report, which will be presented orally as a General Report at the International Symposium ISAP '86, and will be printed either in the RILEM journal Materials and Structures or separately. Several test recommendations have been elaborated and will be prepared as drafts for the participants ofISAP '86. These are: - direct tensile test - pull-off test - direct shear test - slant shear test - four-point bending test - dynamic loading test - thermal compatibility test (two versions) - injectibility test.

Download or read book Degradation of Implant Materials written by Noam Eliaz and published by Springer Science & Business Media. This book was released on 2012-08-21 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the current understanding of the mechanical, chemical and biological processes that are responsible for the degradation of a variety of implant materials. All 18 chapters will be written by internationally renowned experts to address both fundamental and practical aspects of research into the field. Different failure mechanisms such as corrosion, fatigue, and wear will be reviewed, together with experimental techniques for monitoring them, either in vitro or in vivo. Procedures for implant retrieval and analysis will be presented. A variety of biomaterials (stainless steels, titanium and its alloys, nitinol, magnesium alloys, polyethylene, biodegradable polymers, silicone gel, hydrogels, calcium phosphates) and medical devices (orthopedic and dental implants, stents, heart valves, breast implants) will be analyzed in detail. The book will serve as a broad reference source for graduate students and researchers studying biomedicine, corrosion, surface science, and electrochemistry.

Download or read book Fundamentals of Cheese Science written by Patrick F. Fox and published by Springer. This book was released on 2016-08-22 with total page 803 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of the scientific aspects of cheese, emphasizing fundamental principles. The book's updated 22 chapters cover the chemistry and microbiology of milk for cheesemaking, starter cultures, coagulation of milk by enzymes or by acidification, the microbiology and biochemistry of cheese ripening, the flavor and rheology of cheese, processed cheese, cheese as a food ingredient, public health and nutritional aspects of cheese, and various methods used for the analysis of cheese. The book contains copious references to other texts and review articles.

Download or read book Physical Control Methods in Plant Protection written by Charles Vincent and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Jointly published with INRA, Paris. Pesticide resistance is becoming more frequent and widespread with more than 500 insect species known to have become resistant to synthetic insecticides. On the other hand, consumers increasingly demand agricultural products without any pesticide residues. This book, for the first time, shows the alternative: solely physical methods for plant protection by means of thermal, electromagnetic, mechanical and vacuum processes. A glossary rounds up this extremely valuable book.

Download or read book The Physics and Chemistry of SiO2 and the Si SiO2 Interface 2 written by B.E. Deal and published by Springer Science & Business Media. This book was released on 2013-11-09 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first international symposium on the subject "The Physics and Chemistry of Si02 and the Si-Si02 Interface," organized in association with the Electrochemical Society, Inc. , was held in Atlanta, Georgia on May 15- 20, 1988. This symposium contained sixty papers and was so successful that the sponsoring divisions decided to schedule it on a regular basis every four years. Thus, the second symposium on "The Physics and Chemistry of Si02 and the Si02 Interface was held May 18-21, 1992 in St. Louis, Missouri, again sponsored by the Electronics and Dielectrics Science and Technology Divisions of The Electrochemical Society. This volume contains manuscripts of most of the fifty nine papers presented at the 1992 symposium, and is divided into eight chapters - approximating the organization of the symposium. Each chapter is preceded with an introduction by the session organizers. It is appropriate to provide a general assessment of the current status and understanding of the physics and chemistry of Si02 and the Si02 interface before proceeding with a brief overview of the individual chapters. Semiconductor devices have continued to scale down in both horizontal and vertical dimensions. This has resulted in thinner gate and field oxides as well as much closer spacing of individual device features. As a result, surface condition, native oxide composition, and cleaning and impurity effects now provide a much more significant contribution to the properties of oxides and their interfaces.

Download or read book Science and Application of Nanotubes written by D. Tománek and published by Springer Science & Business Media. This book was released on 2005-12-17 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series of books, which is published at the rate of about one per year, addresses fundamental problems in materials science. The contents cover a broad range of topics from small clusters of atoms to engineering materials and involve chemistry, physics, materials science, and engineering, with length scales ranging from Ångstroms up to millimeters. The emphasis is on basic science rather than on applications. Each book focuses on a single area of current interest and brings together leading experts to give an up-to-date discussion of their work and the work of others. Each article contains enough references that the interested reader can access the relevant literature. Thanks are given to the Center for Fundamental Materials Research at Michigan State University for supporting this series. M. F. Thorpe, Series Editor E-mail: thorpe@pa. msu. edu East Lansing, Michigan V PREFACE It is hard to believe that not quite ten years ago, namely in 1991, nanotubes of carbon were discovered by Sumio Iijima in deposits on the electrodes of the same carbon arc apparatus that was used to produce fullerenes such as the “buckyball”. Nanotubes of carbon or other materials, consisting ofhollow cylinders that are only a few nanometers in diameter, yet up to millimeters long, are amazing structures that self-assemble under extreme conditions. Their quasi-one-dimensional character and virtual absence of atomic defects give rise to a plethora of unusual phenomena.

Download or read book Experimental Chaos written by Stefano Boccaletti and published by A I P Press. This book was released on 2004-12-14 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8th Experimental Chaos Conference again demonstrated the broad spectrum of areas where nonlinear dynamics plays an important role, such as circuits, hydrodynamics, optics, chemistry, fracture dynamics, neuroscience, and cognitive science. Additional contributions outline the trends for development and application of concepts and techniques of nonlinear dynamics.

Download or read book International Symposium on Biomedical Engineering and Medical Physics 10 12 October 2012 Riga Latvia written by Yuri Dekhtyar and published by Springer Science & Business Media. This book was released on 2012-09-28 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the proceedings of the International Symposium on Biomedical Engineering and Medical Physics and is dedicated to the 150 anniversary of the Riga Technical University, Latvia. The content includes various hot topics in biomedical engineering and medical physics.

Download or read book Theory of X Ray Diffraction in Crystals written by William H. Zachariasen and published by Dover Publications. This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic by one of the great figures in x-ray structure analysis provides a vigorous mathematical treatment of its subject. Addresses such fundamentals as crystal faces and edges, the lattice postulate, lattice rows and panes, as well as point, translation, and space groups. 1945 edition.

Download or read book Computational Rheology written by Robert G. Owens and published by World Scientific Publishing Company. This book was released on 2002 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work traces the development of numerical methods for non-Newtonian flows from the late 1960s to 2001. It begins with broad coverage of non-Newtonian fluids, including their mathematical modelling and analysis, and then specific computational techniques are discussed.