Download or read book Ethylene Glycol Production from Ethylene Cost Analysis MEG E13A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Monoethylene Glycol (MEG) production from ethylene. The process examined is similar to Shell OMEGA process. In this process, ethylene is first oxidized with oxygen to produce ethylene oxide. Part of the ethylene oxide generated is sold as a by-product and the remaining part is converted to MEG as the final product. This report was developed based essentially on the following reference(s): (1) US Patent 8329959, issued to Shell in 2012 (2) US Patent 8217190, issued to Shell in 2012 Keywords: Ethene, Shell, OMEGA, Only MEG Advantage, Oxidation, Catalytic Process
Download or read book Ethylene Glycol Production from Ethylene Cost Analysis MEG E12A written by Intratec and published by Intratec. This book was released on 2016-03-01 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Monoethylene Glycol (MEG) production from ethylene The process examined is similar to Shell OMEGA process. In this process, ethylene is first oxidized with oxygen to produce ethylene oxide, which is further converted to MEG. This report was developed based essentially on the following reference(s): (1) US Patent 8329959, issued to Shell in 2012 (2) US Patent 8217190, issued to Shell in 2012 Keywords: Ethene, Shell, OMEGA, Only MEG Advantage, Oxidation, Catalytic Process
Download or read book Ethylene Glycol Production from Ethylene Cost Analysis MEG E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Monoethylene Glycol (MEG) production from ethylene This process consists of a two-steps process. First, ethylene is oxidized with oxygen to produce ethylene oxide, which is further hydrolyzed to MEG. Diethylene glycol (DEG) and triethylene glycol (TEG) are also generated as by-products in the process. This report was developed based essentially on the following reference(s): (1) "Ethylene Oxide", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition (2) "Ethylene Glycol", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Shell Master, Scientific Design, Oxidation, Dow METEOR
Download or read book Ethylene Glycol Production from Ethylene Oxide Cost Analysis MEG E32A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Monoethylene Glycol (MEG) production from ethylene oxide. The process examined is similar to Shell OMEGA process. In this process ethylene glycol is produced from ethylene oxide, with ethylene carbonate as an intermediate. This report was developed based essentially on the following reference(s): Keywords: Shell, OMEGA, Only MEG Advantage, Oxidation, Catalytic Process, Mitsubishi
Download or read book Ethylene Glycol Production from Syngas Cost Analysis MEG E41A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Monoethylene Glycol (MEG) production from synthesis gas (syngas) In this process, syngas is carbonylated to dimethyl oxalate intermediate, which is then hydrogenated to MEG. This report was developed based essentially on the following reference(s): (1) US Patent 4453026, issued to Ube Industries Ltd. in 1984 (2) CN Patent 102380382, issued to Shenyang University of Chemical Technology in 2012 Keywords: 1,2-Ethanediol, Carbonylation, Hydrogenation, Nitric Oxide, Ube, Fujian Research Institute on the Structure of Matter, FJIRSM, Union Carbide, ARCO, Gasification
Download or read book Ethylene Glycol Production from Ethylene Oxide Cost Analysis MEG E31A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Monoethylene Glycol (MEG) production from ethylene oxide. In this process ethylene oxide is hydrolyzed to MEG. Diethylene glycol (DEG) and triethylene glycol (TEG) are also generated as by-products in the process. This report was developed based essentially on the following reference(s): (1) "Ethylene Oxide", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition (2) "Ethylene Glycol", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Shell Master, Scientific Design, Oxidation
Download or read book Ethylene Production Cost Analysis Overview Ethylene AA01 written by Intratec and published by Intratec. This book was released on 2016-03-01 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents alternatives for producing Ethylene from different feedstocks and a cost comparison of these alternatives, across different countries. More specifically, the report compares the costs of Ethylene production through the following pathways: * Pathway 1: Ethylene Production from Ethane * Pathway 2: Ethylene Production from Ethane and Propane * Pathway 3: Green Ethylene Production from Ethanol In Pathways 1 and 2, Ethylene is produced via steam cracking of different feedstocks: ethane and a mixture of ethane and propane. In Pathway 3, Ethylene is produced from ethanol, which is a renewable feedstock. The analysis presented in this report includes: * A comparison of the economic potential of the pathways listed above in several countries, comprising: - Comparative analysis of capital costs - Comparative analysis of production costs - Comparison between product price and raw materials costs of each pathway * An overview of each production pathway, including: - Raw material(s) consumption figures and product(s) generated - Related technology licensors and block flow diagram of representative industrial processes Keywords: Hydrocarbon Pyrolysis, Cracking Furnace, Ethene, Propene, Shale Gas, CB&I Lummus, Technip, Shaw Stone & Webster, Kellogg-Braun & Root, KBR, Linde, Green Ethylene, Braskem, Chematur Technologies, Petron Scientech, Scientific Design, Dow Chemical, BP, Ethanol Dehydration
Download or read book Ethylene Production Cost Analysis Overview Ethylene AA01 written by Intratec Solutions and published by . This book was released on 2016-03 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents alternatives for producing Ethylene from different feedstocks and a cost comparison of these alternatives, across different countries. More specifically, the report compares the costs of Ethylene production through the following pathways:* Pathway 1: Ethylene Production from Ethane* Pathway 2: Ethylene Production from Ethane and Propane* Pathway 3: Green Ethylene Production from EthanolIn Pathways 1 and 2, Ethylene is produced via steam cracking of different feedstocks: ethane and a mixture of ethane and propane. In Pathway 3, Ethylene is produced from ethanol, which is a renewable feedstock.The analysis presented in this report includes:* A comparison of the economic potential of the pathways listed above in several countries, comprising: * Comparative analysis of capital costs * Comparative analysis of production costs * Comparison between product price and raw materials costs of each pathway * An overview of each production pathway, including: * Raw material(s) consumption figures and product(s) generated * Related technology licensors and block flow diagram of representative industrial processes Keywords: Hydrocarbon Pyrolysis, Cracking Furnace, Ethene, Propene, Shale Gas, CB&I Lummus, Technip, Shaw Stone & Webster, Kellogg-Braun & Root, KBR, Linde, Green Ethylene, Braskem, Chematur Technologies, Petron Scientech, Scientific Design, Dow Chemical, BP, Ethanol Dehydration
Download or read book Ethylene Production via Ethanol Dehydration Cost Analysis Ethylene E82A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from hydrous ethanol using a dehydration process. The process under analysis is similar to the processes developed by Chematur and Petron. In this process, the reaction system is composed of multiple reactors in series and a single furnace. The system uses ethanol as heating fluid, with no injection of additional steam. This report was developed based essentially on the following reference(s): (1) Chematur Engineering AB, "Ethylene from Ethanol" (2) US Patent 20130178674, issued to Petron in 2013 Keywords: Ethene, Ethyl Alcohol, Vapor-Phase Dehydration, Fixed-Bed Reactor, Renewable Feedstock, Green Ethylene
Download or read book CO2 Sequestration and Valorization written by Claudia R. V. Morgado and published by BoD – Books on Demand. This book was released on 2014-03-12 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reconciliation of economic development, social justice and reduction of greenhouse gas emissions is one of the biggest political challenges of the moment. Strategies for mitigating CO2 emissions on a large scale using sequestration, storage and carbon technologies are priorities on the agendas of research centres and governments. Research on carbon sequestration is the path to solving major sustainability problems of this century a complex issue that requires a scientific approach and multidisciplinary and interdisciplinary technology, plus a collaborative policy among nations. Thus, this challenge makes this book an important source of information for researchers, policymakers and anyone with an inquiring mind on this subject.
Download or read book The Cancer Atlas written by Ahmedin Jemal and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This atlas illustrates the latest available data on the cancer epidemic, showing causes, stages of development, and prevalence rates of different types of cancers by gender, income group, and region. It also examines the cost of the disease, both in terms of health care and commercial interests, and the steps being taken to curb the epidemic, from research and screening to cancer management programs and health education.
Download or read book Plastic Waste and Recycling written by Trevor M. Letcher and published by Academic Press. This book was released on 2020-03-10 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Waste and Recycling: Environmental Impact, Societal Issues, Prevention, and Solutions begins with an introduction to the different types of plastic materials, their uses, and the concepts of reduce, reuse and recycle before examining plastic types, chemistry and degradation patterns that are organized by non-degradable plastic, degradable and biodegradable plastics, biopolymers and bioplastics. Other sections cover current challenges relating to plastic waste, explain the sources of waste and their routes into the environment, and provide systematic coverage of plastic waste treatment methods, including mechanical processing, monomerization, blast furnace feedstocks, gasification, thermal recycling, and conversion to fuel. This is an essential guide for anyone involved in plastic waste or recycling, including researchers and advanced students across plastics engineering, polymer science, polymer chemistry, environmental science, and sustainable materials. Presents actionable solutions for reducing plastic waste, with a focus on the concepts of collection, re-use, recycling and replacement Considers major societal and environmental issues, providing the reader with a broader understanding and supporting effective implementation Includes detailed case studies from across the globe, offering unique insights into different solutions and approaches
Download or read book Springer Handbook of Medical Technology written by Rüdiger Kramme and published by Springer Science & Business Media. This book was released on 2011-10-02 with total page 1497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise, user-oriented and up-to-date desk reference offers a broad introduction to the fascinating world of medical technology, fully considering today’s progress and further development in all relevant fields. The Springer Handbook of Medical Technology is a systemized and well-structured guideline which distinguishes itself through simplification and condensation of complex facts. This book is an indispensable resource for professionals working directly or indirectly with medical systems and appliances every day. It is also meant for graduate and post graduate students in hospital management, medical engineering, and medical physics.
Download or read book Elements of Chemical Reaction Engineering written by H. Scott Fogler and published by Pearson Educación. This book was released on 1999 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The fourth edition of Elements of Chemical Reaction Engineering is a completely revised version of the book. It combines authoritative coverage of the principles of chemical reaction engineering with an unsurpassed focus on critical thinking and creative problem solving, employing open-ended questions and stressing the Socratic method. Clear and organized, it integrates text, visuals, and computer simulations to help readers solve even the most challenging problems through reasoning, rather than by memorizing equations."--BOOK JACKET.
Download or read book Resource Revolution written by Richard Dobbs and published by . This book was released on 2011 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Detection Challenges in Clinical Diagnostics written by Pankaj Vadgama and published by Royal Society of Chemistry. This book was released on 2013 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are many remaining challenges impeding future progress in field of Clinical Diagnostics. This book presents a technical assessment and vision of clinical leaders, scoping the clinical and other diagnostic needs and the bottle-necks in their cognate fields. Issues of real environmental biological measurements from the perspective of the end-user are presented and thus the book serves to inform the direction of the fundamental scientific efforts. Both editors are experienced practitioners within the biosensor technology and are involved first-hand with the healthcare and clinical applications of detection science.
Download or read book Fundamentals of Tissue Engineering and Regenerative Medicine written by Ulrich Meyer and published by Springer Science & Business Media. This book was released on 2009-02-11 with total page 1049 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Fundamentals of Tissue Engineering and Regenerative Medicine" provides a complete overview of the state of the art in tissue engineering and regenerative medicine. Tissue engineering has grown tremendously during the past decade. Advances in genetic medicine and stem cell technology have significantly improved the potential to influence cell and tissue performance, and have recently expanded the field towards regenerative medicine. In recent years a number of approaches have been used routinely in daily clinical practice, others have been introduced in clinical studies, and multitudes are in the preclinical testing phase. Because of these developments, there is a need to provide comprehensive and detailed information for researchers and clinicians on this rapidly expanding field. This book offers, in a single volume, the prerequisites of a comprehensive understanding of tissue engineering and regenerative medicine. The book is conceptualized according to a didactic approach (general aspects: social, economic, and ethical considerations; basic biological aspects of regenerative medicine: stem cell medicine, biomolecules, genetic engineering; classic methods of tissue engineering: cell, tissue, organ culture; biotechnological issues: scaffolds; bioreactors, laboratory work; and an extended medical discipline oriented approach: review of clinical use in the various medical specialties). The content of the book, written in 68 chapters by the world’s leading research and clinical specialists in their discipline, represents therefore the recent intellect, experience, and state of this bio-medical field.
