Download or read book Essentials of Nonlinear Control Theory written by James R. Leigh and published by IET. This book was released on 1983 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The following topics are dealt with: nonlinearity: dynamic systems; describing function method; phase plane portrait; linearisation ;nonlinear second-order system linearisation; envelope methods; Limit cycles; relaxation oscillations; Lienard's equation; gradient systems and system decomposition.
Download or read book Nonlinear and Optimal Control Theory written by Andrei A. Agrachev and published by Springer. This book was released on 2008-06-24 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The lectures gathered in this volume present some of the different aspects of Mathematical Control Theory. Adopting the point of view of Geometric Control Theory and of Nonlinear Control Theory, the lectures focus on some aspects of the Optimization and Control of nonlinear, not necessarily smooth, dynamical systems. Specifically, three of the five lectures discuss respectively: logic-based switching control, sliding mode control and the input to the state stability paradigm for the control and stability of nonlinear systems. The remaining two lectures are devoted to Optimal Control: one investigates the connections between Optimal Control Theory, Dynamical Systems and Differential Geometry, while the second presents a very general version, in a non-smooth context, of the Pontryagin Maximum Principle. The arguments of the whole volume are self-contained and are directed to everyone working in Control Theory. They offer a sound presentation of the methods employed in the control and optimization of nonlinear dynamical systems.
Download or read book Nonlinear Systems written by Shankar Sastry and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been much excitement over the emergence of new mathematical techniques for the analysis and control of nonlinear systems. In addition, great technological advances have bolstered the impact of analytic advances and produced many new problems and applications which are nonlinear in an essential way. This book lays out in a concise mathematical framework the tools and methods of analysis which underlie this diversity of applications.
Download or read book Nonlinear Control Systems and Power System Dynamics written by Qiang Lu and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Control Systems and Power System Dynamics presents a comprehensive description of nonlinear control of electric power systems using nonlinear control theory, which is developed by the differential geometric approach and nonlinear robust control method. This book explains in detail the concepts, theorems and algorithms in nonlinear control theory, illustrated by step-by-step examples. In addition, all the mathematical formulation involved in deriving the nonlinear control laws of power systems are sufficiently presented. Considerations and cautions involved in applying nonlinear control theory to practical engineering control designs are discussed and special attention is given to the implementation of nonlinear control laws using microprocessors. Nonlinear Control Systems and Power System Dynamics serves as a text for advanced level courses and is an excellent reference for engineers and researchers who are interested in the application of modern nonlinear control theory to practical engineering control designs.
Download or read book Nonlinear and Optimal Control Systems written by Thomas L. Vincent and published by John Wiley & Sons. This book was released on 1997-06-23 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for one-semester introductory senior-or graduate-level course, the authors provide the student with an introduction of analysis techniques used in the design of nonlinear and optimal feedback control systems. There is special emphasis on the fundamental topics of stability, controllability, and optimality, and on the corresponding geometry associated with these topics. Each chapter contains several examples and a variety of exercises.
Download or read book Nonlinear Control Systems written by Alberto Isidori and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to present a self-contained description of the fundamentals of the theory of nonlinear control systems, with special emphasis on the differential geometric approach. The book is intended as a graduate text as well as a reference to scientists and engineers involved in the analysis and design of feedback systems. The first version of this book was written in 1983, while I was teaching at the Department of Systems Science and Mathematics at Washington University in St. Louis. This new edition integrates my subsequent teaching experience gained at the University of Illinois in Urbana-Champaign in 1987, at the Carl Cranz Gesellschaft in Oberpfaffenhofen in 1987, at the University of California in Berkeley in 1988. In addition to a major rearrangement of the last two Chapters of the first version, this new edition incorporates two additional Chapters at a more elementary level and an exposition of some relevant research findings which have occurred since 1985. In the past few years differential geometry has proved to be an effective means of analysis and design of nonlinear control systems as it was in the past for the Laplace transform, complex variable theory and linear algebra in relation to linear systems. Synthesis problems of longstanding interest like disturbance decoupling, noninteracting control, output regulation, and the shaping of the input-output response, can be dealt with relative ease, on the basis of mathematical concepts that can be easily acquired by a control scientist.
Download or read book Constructive Nonlinear Control written by R. Sepulchre and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Constructive Nonlinear Control presents a broad repertoire of constructive nonlinear designs not available in other works by widening the class of systems and design tools. Several streams of nonlinear control theory are merged and directed towards a constructive solution of the feedback stabilization problem. Analysis, geometric and asymptotic concepts are assembled as design tools for a wide variety of nonlinear phenomena and structures. Geometry serves as a guide for the construction of design procedures whilst analysis provides the robustness which geometry lacks. New recursive designs remove earlier restrictions on feedback passivation. Recursive Lyapunov designs for feedback, feedforward and interlaced structures result in feedback systems with optimality properties and stability margins. The design-oriented approach will make this work a valuable tool for all those who have an interest in control theory.
Download or read book Nonlinear Dynamical Control Systems written by Henk Nijmeijer and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume deals with controllability and observability properties of nonlinear systems, as well as various ways to obtain input-output representations. The emphasis is on fundamental notions as (controlled) invariant distributions and submanifolds, together with algorithms to compute the required feedbacks.
Download or read book Applied Nonlinear Control written by Jean-Jacques E. Slotine and published by . This book was released on 1991 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this work, the authors present a global perspective on the methods available for analysis and design of non-linear control systems and detail specific applications. They provide a tutorial exposition of the major non-linear systems analysis techniques followed by a discussion of available non-linear design methods.
Download or read book Analysis and Design of Nonlinear Control Systems written by Daizhan Cheng and published by Springer Science & Business Media. This book was released on 2011-03-28 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Analysis and Design of Nonlinear Control Systems" provides a comprehensive and up to date introduction to nonlinear control systems, including system analysis and major control design techniques. The book is self-contained, providing sufficient mathematical foundations for understanding the contents of each chapter. Scientists and engineers engaged in the field of Nonlinear Control Systems will find it an extremely useful handy reference book. Dr. Daizhan Cheng, a professor at Institute of Systems Science, Chinese Academy of Sciences, has been working on the control of nonlinear systems for over 30 years and is currently a Fellow of IEEE and a Fellow of IFAC, he is also the chairman of Technical Committee on Control Theory, Chinese Association of Automation.
Download or read book Nonlinear Control Systems written by Horacio Márquez and published by Wiley-Interscience. This book was released on 2003-04-25 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides complete coverage of both the Lyapunov and Input-Output stability theories, ina readable, concise manner. * Supplies an introduction to the popular backstepping approach to nonlinear control design * Gives a thorough discussion of the concept of input-to-state stability * Includes a discussion of the fundamentals of feedback linearization and related results. * Details complete coverage of the fundamentals of dissipative system's theory and its application in the so-called L2gain control prooblem, for the first time in an introductory level textbook. * Contains a thorough discussion of nonlinear observers, a very important problem, not commonly encountered in textbooksat this level. *An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.
Download or read book Essentials of Nonlinear Circuit Dynamics with MATLAB and Laboratory Experiments written by Arturo Buscarino and published by CRC Press. This book was released on 2017-04-07 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with nonlinear dynamics of electronic circuits, which could be used in robot control, secure communications, sensors and synchronized networks. The genesis of the content is related to a course on complex adaptive systems that has been held at the University of Catania since 2005. The efforts are devoted in order to emulate with nonlinear electronic circuits nonlinear dynamics. Step-by-step methods show the essential concepts of complex systems by using the Varela diagrams and accompanying MATLAB® exercises to reinforce new information. Special attention has been devoted to chaotic systems and networks of chaotic circuits by exploring the fundamentals, such as synchronization and control. The aim of the book is to give to readers a comprehensive view of the main concepts of nonlinear dynamics to help them better understand complex systems and their control through the use of electronics devices.
Download or read book Nonlinear Dynamical Systems and Control written by Wassim M. Haddad and published by Princeton University Press. This book was released on 2011-09-19 with total page 975 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Dynamical Systems and Control presents and develops an extensive treatment of stability analysis and control design of nonlinear dynamical systems, with an emphasis on Lyapunov-based methods. Dynamical system theory lies at the heart of mathematical sciences and engineering. The application of dynamical systems has crossed interdisciplinary boundaries from chemistry to biochemistry to chemical kinetics, from medicine to biology to population genetics, from economics to sociology to psychology, and from physics to mechanics to engineering. The increasingly complex nature of engineering systems requiring feedback control to obtain a desired system behavior also gives rise to dynamical systems. Wassim Haddad and VijaySekhar Chellaboina provide an exhaustive treatment of nonlinear systems theory and control using the highest standards of exposition and rigor. This graduate-level textbook goes well beyond standard treatments by developing Lyapunov stability theory, partial stability, boundedness, input-to-state stability, input-output stability, finite-time stability, semistability, stability of sets and periodic orbits, and stability theorems via vector Lyapunov functions. A complete and thorough treatment of dissipativity theory, absolute stability theory, stability of feedback systems, optimal control, disturbance rejection control, and robust control for nonlinear dynamical systems is also given. This book is an indispensable resource for applied mathematicians, dynamical systems theorists, control theorists, and engineers.
Download or read book Neural Control Engineering written by Steven J. Schiff and published by MIT Press. This book was released on 2011-11-10 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: How powerful new methods in nonlinear control engineering can be applied to neuroscience, from fundamental model formulation to advanced medical applications. Over the past sixty years, powerful methods of model-based control engineering have been responsible for such dramatic advances in engineering systems as autolanding aircraft, autonomous vehicles, and even weather forecasting. Over those same decades, our models of the nervous system have evolved from single-cell membranes to neuronal networks to large-scale models of the human brain. Yet until recently control theory was completely inapplicable to the types of nonlinear models being developed in neuroscience. The revolution in nonlinear control engineering in the late 1990s has made the intersection of control theory and neuroscience possible. In Neural Control Engineering, Steven Schiff seeks to bridge the two fields, examining the application of new methods in nonlinear control engineering to neuroscience. After presenting extensive material on formulating computational neuroscience models in a control environment—including some fundamentals of the algorithms helpful in crossing the divide from intuition to effective application—Schiff examines a range of applications, including brain-machine interfaces and neural stimulation. He reports on research that he and his colleagues have undertaken showing that nonlinear control theory methods can be applied to models of single cells, small neuronal networks, and large-scale networks in disease states of Parkinson's disease and epilepsy. With Neural Control Engineering the reader acquires a working knowledge of the fundamentals of control theory and computational neuroscience sufficient not only to understand the literature in this trandisciplinary area but also to begin working to advance the field. The book will serve as an essential guide for scientists in either biology or engineering and for physicians who wish to gain expertise in these areas.
Download or read book Nonlinear Control Systems written by Alberto Isidori and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to present a self-contained description of the fun damentals of the theory of nonlinear control systems, with special emphasis on the differential geometric approach. The book is intended as a graduate text as weil as a reference to scientists and engineers involved in the analysis and design of feedback systems. The first version of this book was written in 1983, while I was teach ing at the Department of Systems Science and Mathematics at Washington University in St. Louis. This new edition integrates my subsequent teaching experience gained at the University of Illinois in Urbana-Champaign in 1987, at the Carl-Cranz Gesellschaft in Oberpfaffenhofen in 1987, at the University of California in Berkeley in 1988. In addition to a major rearrangement of the last two Chapters of the first version, this new edition incorporates two additional Chapters at a more elementary level and an exposition of some relevant research findings which have occurred since 1985.
Download or read book Control Theory Tutorial written by Steven A. Frank and published by Springer. This book was released on 2018-05-29 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access Brief introduces the basic principles of control theory in a concise self-study guide. It complements the classic texts by emphasizing the simple conceptual unity of the subject. A novice can quickly see how and why the different parts fit together. The concepts build slowly and naturally one after another, until the reader soon has a view of the whole. Each concept is illustrated by detailed examples and graphics. The full software code for each example is available, providing the basis for experimenting with various assumptions, learning how to write programs for control analysis, and setting the stage for future research projects. The topics focus on robustness, design trade-offs, and optimality. Most of the book develops classical linear theory. The last part of the book considers robustness with respect to nonlinearity and explicitly nonlinear extensions, as well as advanced topics such as adaptive control and model predictive control. New students, as well as scientists from other backgrounds who want a concise and easy-to-grasp coverage of control theory, will benefit from the emphasis on concepts and broad understanding of the various approaches. Electronic codes for this title can be downloaded from https://extras.springer.com/?query=978-3-319-91707-8
Download or read book Quantitative Feedback Design of Linear and Nonlinear Control Systems written by Oded Yaniv and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantitative Feedback Design of Linear and Nonlinear Control Systems is a self-contained book dealing with the theory and practice of Quantitative Feedback Theory (QFT). The author presents feedback synthesis techniques for single-input single-output, multi-input multi-output linear time-invariant and nonlinear plants based on the QFT method. Included are design details and graphs which do not appear in the literature, which will enable engineers and researchers to understand QFT in greater depth. Engineers will be able to apply QFT and the design techniques to many applications, such as flight and chemical plant control, robotics, space, vehicle and military industries, and numerous other uses. All of the examples were implemented using Matlab® Version 5.3; the script file can be found at the author's Web site. QFT results in efficient designs because it synthesizes a controller for the exact amount of plant uncertainty, disturbances and required specifications. Quantitative Feedback Design of Linear and Nonlinear Control Systems is a pioneering work that illuminates QFT, making the theory - and practice - come alive.
