Download or read book Equivalent Stress Concept for Limit State Analysis written by Vladimir A. Kolupaev and published by Springer. This book was released on 2018-01-18 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses arbitrary multiaxial stress states using the concept of equivalent stress. It highlights the most useful criteria, which can be applied to various classes of isotropic materials. Due to its simplicity and clarity, this concept is now widely used in component design, and many strength and yield criteria based on the equivalent stress concept have been formulated. Choosing the appropriate criterion for a given material remains the main challenge in applications. The most useful criteria can be applied best when the plausibility assumptions are known. Accordingly, the book introduces fitting methods based on mathematical, physical, and geometrical objective functions. It also features a wealth of examples that demonstrate the application of different approaches in modeling certain limit behaviors.

Download or read book State of the Art and Future Trends in Material Modeling written by Holm Altenbach and published by Springer Nature. This book was released on 2019-10-23 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special anniversary book celebrates the success of this Springer book series highlighting materials modeling as the key to developing new engineering products and applications. In this 100th volume of “Advanced Structured Materials”, international experts showcase the current state of the art and future trends in materials modeling, which is essential in order to fulfill the demanding requirements of next-generation engineering tasks.

Download or read book Advances in Mechanics of Time Dependent Materials written by Holm Altenbach and published by Springer Nature. This book was released on 2023-03-09 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents current trends in Mechanics of Time Dependent Materials. It covers a number of cutting-edge themes, such as characterization of linear and nonlinear mechanical behavior of viscoelastic materials and their composites, taking into consideration large deformations, low, moderate and large strain rates, as well as failure and fracture phenomena. The contributions are inspired by advanced applications in modern technologies, such as injection molding and extrusion.

Download or read book Progress in Structural Mechanics written by Holm Altenbach and published by Springer Nature. This book was released on 2024-01-01 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is devoted to the retirement of Prof. Wilfried Becker—a liber amicorum for a well-known specialist in the field of structural mechanics. Many excellent scientists from institutions around the world wrote their scientific chapters, stressing the Becker’s influence to structural mechanics. Thus, this collection discusses a lot of important problems and applications of mechanics.

Download or read book From Bulk to Structural Failure Fracture of Hyperelastic Materials written by Philipp Laurens Rosendahl and published by Springer Nature. This book was released on 2020-12-01 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis investigates the fracture of nearly incompressible hyperelastic media. It covers the different characteristics of bulk material failure under dilatational or distortional loads and develops a unified description of the corresponding failure surface. It proposes a coupled strain and energy failure criterion for the assessment of notch-induced crack nucleation and presents a weak-interface-model that allows for efficient stress, strain and failure analyses of hyperelastic adhesive lap joints. Theoretical concepts for the measurement of fracture properties of nonlinear elastic materials are provided. The methodology is developed using two exemplary hyperelastic silicones, DOWSIL 993 Structural Glazing Sealant and DOWSIL Transparent Structural Silicone Adhesive, and is validated using large sets of experiments of different loading conditions.

Download or read book Materials and Strength of Gas Turbine Parts written by Leonid Borisovich Getsov and published by Springer Nature. This book was released on 2021-04-17 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses several mechanical and material problems that are typical for gas turbine components. It discusses accelerated tests and other methods for increasing the reliability of gas turbine engines. Special attention is given to non-traditional methods for calculating the strength characteristics and longevity of the main components. This first volume focuses on the selection of materials, deformation and destruction mechanisms in connection with stationary and non-stationary loading, and types of material damage such as the thermal fatigue. Particular attention is paid to the issues of the properties of single crystal alloys, the relationship between structure and properties, the influence of technological factors and long-term operation. The characteristics of creep resistance, crack resistance, and resistance to cyclic deformation of different alloys are given.

Download or read book Engineered Transparency 2021 written by Bernhard Weller and published by John Wiley & Sons. This book was released on 2021-07-06 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains more than 70 articles and presents international trends in structural glazing and facade construction. Renowned authors from all over the world report on current research results and innovative construction projects.

Download or read book Lectures Notes on Advanced Structured Materials 2 written by Holm Altenbach and published by Springer Nature. This book was released on with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Theories for Deformation Damage and Failure in Materials written by Holm Altenbach and published by Springer Nature. This book was released on 2022-08-31 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces advanced theories for deformation, damage, and failure in materials. The overall continuum mechanical framework was marked out and added by creep and damage mechanics of materials at elevated temperatures. The time-dependent and time-independent models of cyclic plasticity for low cycle and thermomechanical fatigue life assessment were specified in a very special manner: instead of three-dimensional statements, only one-dimensional rheological models were discussed. Anisotropic plasticity during non-proportional loading and anisotropy of yield/failure criteria is more and more important in modern applications. It is showing how the limit states of materials can be estimated. In addition, the damage and failure of composite materials demonstrate the possibility to extend continuum mechanics to continuum damage mechanics of composite materials.

Download or read book On the anisotropic plastic behaviour of short fibre reinforced thermoplastics and its description by phenomenological material modelling written by Felix Dillenberger and published by Springer Nature. This book was released on 2019-10-21 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: A requirement for the safe design of thermoplastic parts is the ability to precisely predict mechanical behaviour by finite element simulations. Typical examples include the engineering of relevant components in automotive applications. For this purpose adequate material models are essential. In this context, the present work introduces a material modelling approach for short fibre reinforced thermoplastics (SFRTPs). SFRTP parts are processed cost-effectively by injection moulding and show a varying degree of anisotropy due to the locally inhomogeneous fibre distributions that arise during the moulding process. The presented material model considers linear-elastic behaviour and non-linear orthotropic stress-state dependent viscoplastic deformation for arbitrary fibre distributions. The constitutive equations are verified with the experiments of a PPGF30 material regarding different stress-states and orientations.

Download or read book Material Modeling and Structural Mechanics written by Holm Altenbach and published by Springer Nature. This book was released on 2022-05-03 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents various questions of continuum mechanical modeling in the context of experimental and numerical methods, in particular, multi-field problems that go beyond the standard models of continuum mechanics. In addition, it discusses dynamic problems and practical solutions in the field of numerical methods. It focuses on continuum mechanics, which is often overlooked in the traditional division of mechanics into statics, strength of materials and kinetics. The book is dedicated to Prof. Volker Ulbricht, who passed away on April 9, 2021.

Download or read book Welding Joining and Coating of Metallic Materials written by Michael Zinigrad and published by MDPI. This book was released on 2020-12-29 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of state-of-the-art research works in the field of materials science. Specifically, the works deal with issues related to the welding, joining and coating of metallic materials. These methods are known as main processes in the field of metallurgy, and are usually applied in order to solve complex problems of joining metals or the fabrication of metallic surfaces with required properties and performance. The focus of this book is on metals such as aluminum, magnesium, titanium, various types of steel, intermetallics and shape memory alloys. These scientific works address microstructural evaluation, as well as the performance of the produced joints and coatings. Scientists from all over the globe have presented novel advances and possible solutions for metallic materials joints and coatings for applications in the automotive, aerospace, chemical and medical industries, among others.

Download or read book Reinforced Concrete Beams Columns and Frames written by Charles Casandjian and published by John Wiley & Sons. This book was released on 2013-02-05 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on the theoretical and practical design of reinforced concrete beams, columns and frame structures. It is based on an analytical approach of designing normal reinforced concrete structural elements that are compatible with most international design rules, including for instance the European design rules – Eurocode 2 – for reinforced concrete structures. The book tries to distinguish between what belongs to the structural design philosophy of such structural elements (related to strength of materials arguments) and what belongs to the design rule aspects associated with specific characteristic data (for the material or loading parameters). Reinforced Concrete Beams, Columns and Frames – Mechanics and Design deals with the fundamental aspects of the mechanics and design of reinforced concrete in general, both related to the Serviceability Limit State (SLS) and the Ultimate Limit State (ULS). A second book, entitled Reinforced Concrete Beams, Columns and Frames – Section and Slender Member Analysis, deals with more advanced ULS aspects, along with instability and second-order analysis aspects. Some recent research results including the use of non-local mechanics are also presented. This book is aimed at Masters-level students, engineers, researchers and teachers in the field of reinforced concrete design. Most of the books in this area are very practical or code-oriented, whereas this book is more theoretically based, using rigorous mathematics and mechanics tools. Contents 1. Design at Serviceability Limit State (SLS). 2. Verification at Serviceability Limit State (SLS). 3. Concepts for the Design at Ultimate Limit State (ULS). 4. Bending-Curvature at Ultimate Limit State (ULS). Appendix 1. Cardano’s Method. Appendix 2. Steel Reinforcement Table. About the Authors Charles Casandjian was formerly Associate Professor at INSA (French National Institute of Applied Sciences), Rennes, France and the chairman of the course on reinforced concrete design. He has published work on the mechanics of concrete and is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX. Noël Challamel is Professor in Civil Engineering at UBS, University of South Brittany in France and chairman of the EMI-ASCE Stability committee. His contributions mainly concern the dynamics, stability and inelastic behavior of structural components, with special emphasis on Continuum Damage Mechanics (more than 70 publications in International peer-reviewed journals). Christophe Lanos is Professor in Civil Engineering at the University of Rennes 1 in France. He has mainly published work on the mechanics of concrete, as well as other related subjects. He is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX. Jostein Hellesland has been Professor of Structural Mechanics at the University of Oslo, Norway since January 1988. His contribution to the field of stability has been recognized and magnified by many high-quality papers in famous international journals such as Engineering Structures, Thin-Walled Structures, Journal of Constructional Steel Research and Journal of Structural Engineering.

Download or read book Lloyd s Register Technical Association 1986 1987 written by Lloyd's Register Foundation and published by Lloyd's Register . This book was released on 1986-01-01 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Lloyd’s Register Technical Association (LRTA) was established in 1920 with the primary objective of sharing technical expertise and knowledge within Lloyd’s Register. Publications have consistently been released on a yearly basis, with a brief interruption between 1938 and 1946. These publications serve as a key reference point for best practices and were initially reserved for internal use to maximise LR’s competitive advantage. Today, the LRTA takes a fresh approach, focusing on collaboration by combining professional expertise from across LRF & Group to ensure a frequent output of fresh perspectives and relevant content. The LRTA has evolved into a Group-wide initiative that identifies, captures, and shares knowledge spanning various business streams and functions. To support this modern approach, the LRTA has adopted a new structure featuring representatives and senior governance across the business streams and the LR Foundation. The Lloyd's Register Technical Association Papers should be seen as historical documents representing earlier viewpoints and are not reflective of current thinking and perspectives by the current LR Technical Association.

Download or read book Multiscale Modelling of Damage and Fracture Processes in Composite Materials written by Tomasz Sadowski and published by Springer Science & Business Media. This book was released on 2007-03-23 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores damage growth and fracture processes in cementitious, ceramic, polymer and metal matrix composites, integrating properties like stiffness and strength with observation at below macroscopic scale. Advances in multiscale modelling and analysis pertain directly to materials which either have a range of relevant microstructural scales, like metals, or do not have a well-defined microstructure, like cementitious or ceramic composites.

Download or read book Proceedings of the National Conference on Advances in Civil Engineering Perspectives of Developing Countries ACEDEC 2003 Structures engineering and geotechnical infrastructure development written by and published by Allied Publishers. This book was released on 2003 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Engineering Science and Viscoelasticity written by Hal F. Brinson and published by Springer. This book was released on 2015-01-24 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a unified mechanics and materials perspective on polymers: both the mathematics of viscoelasticity theory as well as the physical mechanisms behind polymer deformation processes. Introductory material on fundamental mechanics is included to provide a continuous baseline for readers from all disciplines. Introductory material on the chemical and molecular basis of polymers is also included, which is essential to the understanding of the thermomechanical response. This self-contained text covers the viscoelastic characterization of polymers including constitutive modeling, experimental methods, thermal response, and stress and failure analysis. Example problems are provided within the text as well as at the end of each chapter. New to this edition: · One new chapter on the use of nano-material inclusions for structural polymer applications and applications such as fiber-reinforced polymers and adhesively bonded structures · Brings up-to-date polymer production and sales data and equipment and procedures for evaluating polymer characterization and classification · The work serves as a comprehensive reference for advanced seniors seeking graduate level courses, first and second year graduate students, and practicing engineers