Download or read book Equations of State and PVT Analysis written by Tarek Ahmed and published by Gulf Professional Publishing. This book was released on 2016-03-02 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the properties of a reservoir’s fluids and creating a successful model based on lab data and calculation are required for every reservoir engineer in oil and gas today, and with reservoirs becoming more complex, engineers and managers are back to reinforcing the fundamentals. PVT (pressure-volume-temperature) reports are one way to achieve better parameters, and Equations of State and PVT Analysis, 2nd Edition, helps engineers to fine tune their reservoir problem-solving skills and achieve better modeling and maximum asset development. Designed for training sessions for new and existing engineers, Equations of State and PVT Analysis, 2nd Edition, will prepare reservoir engineers for complex hydrocarbon and natural gas systems with more sophisticated EOS models, correlations and examples from the hottest locations around the world such as the Gulf of Mexico, North Sea and China, and Q&A at the end of each chapter. Resources are maximized with this must-have reference. Improve with new material on practical applications, lab analysis, and real-world sampling from wells to gain better understanding of PVT properties for crude and natural gas Sharpen your reservoir models with added content on how to tune EOS parameters accurately Solve more unconventional problems with field examples on phase behavior characteristics of shale and heavy oil

Download or read book Hydrocarbon Phase Behavior written by Tarek H. Ahmed and published by Butterworth-Heinemann. This book was released on 1989 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Phase Behavior of Petroleum Reservoir Fluids written by Karen Schou Pedersen and published by CRC Press. This book was released on 2006-11-01 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the phase behavior of the various fluids present in a petroleum reservoir is essential for achieving optimal design and cost-effective operations in a petroleum processing plant. Taking advantage of the authors' experience in petroleum processing under challenging conditions, Phase Behavior of Petroleum Reservoir Fluids introdu

Download or read book PVT and Phase Behaviour Of Petroleum Reservoir Fluids written by Ali Danesh and published by Elsevier. This book was released on 1998-05-07 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on PVT and Phase Behaviour Of Petroleum Reservoir Fluids is volume 47 in the Developments in Petroleum Science series. The chapters in the book are: Phase Behaviour Fundamentals, PVT Tests and Correlations, Phase Equilibria, Equations of State, Phase Behaviour Calculations, Fluid Characterisation, Gas Injection, Interfacial Tension, and Application in Reservoir Simulation.

Download or read book Phase Behavior written by Curtis H. Whitson and published by Society of Petroleum Engineers. This book was released on 2000 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Behavior provides the reader with the tools needed to solve problems requiring a description of phase behavior and specific pressure/volume/temperature (PVT) properties.

Download or read book Petroleum Reservoir Engineering Practice written by Nnaemeka Ezekwe and published by Pearson Education. This book was released on 2010-09-09 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Complete, Up-to-Date, Practical Guide to Modern Petroleum Reservoir Engineering This is a complete, up-to-date guide to the practice of petroleum reservoir engineering, written by one of the world’s most experienced professionals. Dr. Nnaemeka Ezekwe covers topics ranging from basic to advanced, focuses on currently acceptable practices and modern techniques, and illuminates key concepts with realistic case histories drawn from decades of working on petroleum reservoirs worldwide. Dr. Ezekwe begins by discussing the sources and applications of basic rock and fluid properties data. Next, he shows how to predict PVT properties of reservoir fluids from correlations and equations of state, and presents core concepts and techniques of reservoir engineering. Using case histories, he illustrates practical diagnostic analysis of reservoir performance, covers essentials of transient well test analysis, and presents leading secondary and enhanced oil recovery methods. Readers will find practical coverage of experience-based procedures for geologic modeling, reservoir characterization, and reservoir simulation. Dr. Ezekwe concludes by presenting a set of simple, practical principles for more effective management of petroleum reservoirs. With Petroleum Reservoir Engineering Practice readers will learn to • Use the general material balance equation for basic reservoir analysis • Perform volumetric and graphical calculations of gas or oil reserves • Analyze pressure transients tests of normal wells, hydraulically fractured wells, and naturally fractured reservoirs • Apply waterflooding, gasflooding, and other secondary recovery methods • Screen reservoirs for EOR processes, and implement pilot and field-wide EOR projects. • Use practical procedures to build and characterize geologic models, and conduct reservoir simulation • Develop reservoir management strategies based on practical principles Throughout, Dr. Ezekwe combines thorough coverage of analytical calculations and reservoir modeling as powerful tools that can be applied together on most reservoir analyses. Each topic is presented concisely and is supported with copious examples and references. The result is an ideal handbook for practicing engineers, scientists, and managers—and a complete textbook for petroleum engineering students.

Download or read book Characterization and Properties of Petroleum Fractions written by M. R. Riazi and published by ASTM International. This book was released on 2005 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last three chapters of this book deal with application of methods presented in previous chapters to estimate various thermodynamic, physical, and transport properties of petroleum fractions. In this chapter, various methods for prediction of physical and thermodynamic properties of pure hydrocarbons and their mixtures, petroleum fractions, crude oils, natural gases, and reservoir fluids are presented. As it was discussed in Chapters 5 and 6, properties of gases may be estimated more accurately than properties of liquids. Theoretical methods of Chapters 5 and 6 for estimation of thermophysical properties generally can be applied to both liquids and gases; however, more accurate properties can be predicted through empirical correlations particularly developed for liquids. When these correlations are developed with some theoretical basis, they are more accurate and have wider range of applications. In this chapter some of these semitheoretical correlations are presented. Methods presented in Chapters 5 and 6 can be used to estimate properties such as density, enthalpy, heat capacity, heat of vaporization, and vapor pressure. Characterization methods of Chapters 2-4 are used to determine the input parameters needed for various predictive methods. One important part of this chapter is prediction of vapor pressure that is needed for vapor-liquid equilibrium calculations of Chapter 9.

Download or read book Soft Computing and Intelligent Data Analysis in Oil Exploration written by M. Nikravesh and published by Elsevier. This book was released on 2003-04-22 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book highlights soft computing and geostatistics applications in hydrocarbon exploration and production, combining practical and theoretical aspects. It spans a wide spectrum of applications in the oil industry, crossing many discipline boundaries such as geophysics, geology, petrophysics and reservoir engineering. It is complemented by several tutorial chapters on fuzzy logic, neural networks and genetic algorithms and geostatistics to introduce these concepts to the uninitiated. The application areas include prediction of reservoir properties (porosity, sand thickness, lithology, fluid), seismic processing, seismic and bio stratigraphy, time lapse seismic and core analysis. There is a good balance between introducing soft computing and geostatistics methodologies that are not routinely used in the petroleum industry and various applications areas. The book can be used by many practitioners such as processing geophysicists, seismic interpreters, geologists, reservoir engineers, petrophysicist, geostatistians, asset mangers and technology application professionals. It will also be of interest to academics to assess the importance of, and contribute to, R&D efforts in relevant areas.

Download or read book PVT Property Correlations written by Ahmed El-Banbi and published by Gulf Professional Publishing. This book was released on 2018-04-20 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: PVT properties are necessary for reservoir/well performance forecast and optimization. In absence of PVT laboratory measurements, finding the right correlation to estimate accurate PVT properties could be challenging. PVT Property Correlations: Selection and Estimation discusses techniques to properly calculate PVT properties from limited information. This book covers how to prepare PVT properties for dry gases, wet gases, gas condensates, volatile oils, black oils, and low gas-oil ration oils. It also explains the use of artificial neural network models in generating PVT properties. It presents numerous examples to explain step-by-step procedures in using techniques designed to deliver the most accurate PVT properties from correlations. Complimentary to this book is PVT correlation calculator software. Many of the techniques discussed in this book are available with the software. This book shows the importance of PVT data, provides practical tools to calculate PVT properties, and helps engineers select PVT correlations so they can model, optimize, and forecast their assets. Understand how to prepare PVT data in absence of laboratory reports for all fluid types Become equipped with a comprehensive list of PVT correlations and their applicability ranges Learn about ANN models and their applications in providing PVT data Become proficient in selecting best correlations and improving correlations results

Download or read book Petroleum Reservoir Rock and Fluid Properties written by Abhijit Y. Dandekar and published by CRC Press. This book was released on 2006-02-23 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: A strong foundation in reservoir rock and fluid properties is the backbone of almost all the activities in the petroleum industry. Petroleum Reservoir Rock and Fluid Properties offers a reliable representation of fundamental concepts and practical aspects that encompass this vast subject area. The book provides up-to-date coverage of vari

Download or read book An Introduction to Reservoir Simulation Using MATLAB GNU Octave written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2019-08-08 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents numerical methods for reservoir simulation, with efficient implementation and examples using widely-used online open-source code, for researchers, professionals and advanced students. This title is also available as Open Access on Cambridge Core.

Download or read book Fundamentals of Reservoir Engineering written by L.P. Dake and published by Elsevier. This book was released on 1983-01-01 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book is fast becoming the standard text in its field", wrote a reviewer in the Journal of Canadian Petroleum Technology soon after the first appearance of Dake's book. This prediction quickly came true: it has become the standard text and has been reprinted many times. The author's aim - to provide students and teachers with a coherent account of the basic physics of reservoir engineering - has been most successfully achieved. No prior knowledge of reservoir engineering is necessary. The material is dealt with in a concise, unified and applied manner, and only the simplest and most straightforward mathematical techniques are used. This low-priced paperback edition will continue to be an invaluable teaching aid for years to come.

Download or read book Advanced Reservoir Engineering written by Tarek Ahmed and published by Elsevier. This book was released on 2011-03-15 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Reservoir Engineering offers the practicing engineer and engineering student a full description, with worked examples, of all of the kinds of reservoir engineering topics that the engineer will use in day-to-day activities. In an industry where there is often a lack of information, this timely volume gives a comprehensive account of the physics of reservoir engineering, a thorough knowledge of which is essential in the petroleum industry for the efficient recovery of hydrocarbons. Chapter one deals exclusively with the theory and practice of transient flow analysis and offers a brief but thorough hands-on guide to gas and oil well testing. Chapter two documents water influx models and their practical applications in conducting comprehensive field studies, widely used throughout the industry. Later chapters include unconventional gas reservoirs and the classical adaptations of the material balance equation. * An essential tool for the petroleum and reservoir engineer, offering information not available anywhere else * Introduces the reader to cutting-edge new developments in Type-Curve Analysis, unconventional gas reservoirs, and gas hydrates * Written by two of the industry's best-known and respected reservoir engineers

Download or read book Reservoir Engineering Handbook written by Tarek H. Ahmed and published by Gulf Professional Publishing. This book was released on 2001 with total page 1212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book wxplains the fundamentals of reservoir engineering and their practical application in conducting a comprehensive field study.Two new chapters have been included in this second edition: chapter 14 and 15.

Download or read book Working Guide to Reservoir Rock Properties and Fluid Flow written by Tarek Ahmed and published by Gulf Professional Publishing. This book was released on 2009-08-24 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Working Guide to Reservoir Rock Properties and Fluid Flow provides an introduction to the properties of rocks and fluids that are essential in petroleum engineering. The book is organized into three parts. Part 1 discusses the classification of reservoirs and reservoir fluids. Part 2 explains different rock properties, including porosity, saturation, wettability, surface and interfacial tension, permeability, and compressibility. Part 3 presents the mathematical relationships that describe the flow behavior of the reservoir fluids. The primary reservoir characteristics that must be considered include: types of fluids in the reservoir, flow regimes, reservoir geometry, and the number of flowing fluids in the reservoir. Each part concludes with sample problems to test readers knowledge of the topic covered. Critical properties of reservoir rocks Fluid (oil, water, and gas) PVT relationships Methods to calculate hydrocarbons initially in place Dynamic techniques to assess reservoir performance Parameters that impact well/reservoir performance over time

Download or read book Multiphase Equilibria of Complex Reservoir Fluids written by Huazhou Li and published by Springer Nature. This book was released on 2021-10-30 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This short monograph focuses on the theoretical backgrounds and practical implementations concerning the thermodynamic modeling of multiphase equilibria of complex reservoir fluids using cubic equations of state. It aims to address the increasing needs of multiphase equilibrium calculations that arise in the compositional modeling of multiphase flow in reservoirs and wellbores. It provides a state-of-the-art coverage on the recent improvements of cubic equations of state. Considering that stability test and flash calculation are two basic tasks involved in any multiphase equilibrium calculations, it elaborates on the rigorous mathematical frameworks dedicated to stability test and flash calculation. A special treatment is given to the new algorithms that are recently developed to perform robust and efficient three-phase equilibrium calculations. This monograph will be of value to graduate students who conduct research in the field of phase behavior, as well as software engineers who work on the development of multiphase equilibrium calculation algorithms.

Download or read book The Properties of Gases and Liquids 5E written by Bruce E. Poling and published by McGraw Hill Professional. This book was released on 2000-11-27 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Must-have reference for processes involving liquids, gases, and mixtures Reap the time-saving, mistake-avoiding benefits enjoyed by thousands of chemical and process design engineers, research scientists, and educators. Properties of Gases and Liquids, Fifth Edition, is an all-inclusive, critical survey of the most reliable estimating methods in use today --now completely rewritten and reorganized by Bruce Poling, John Prausnitz, and John O’Connell to reflect every late-breaking development. You get on-the-spot information for estimating both physical and thermodynamic properties in the absence of experimental data with this property data bank of 600+ compound constants. Bridge the gap between theory and practice with this trusted, irreplaceable, and expert-authored expert guide -- the only book that includes a critical analysis of existing methods as well as hands-on practical recommendations. Areas covered include pure component constants; thermodynamic properties of ideal gases, pure components and mixtures; pressure-volume-temperature relationships; vapor pressures and enthalpies of vaporization of pure fluids; fluid phase equilibria in multicomponent systems; viscosity; thermal conductivity;diffusion coefficients; and surface tension.