Download or read book Handbook of Crystal Growth written by Peter Rudolph and published by Elsevier. This book was released on 2014-11-04 with total page 1420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vol 2A: Basic TechnologiesHandbook of Crystal Growth, Second Edition Volume IIA (Basic Technologies) presents basic growth technologies and modern crystal cutting methods. Particularly, the methodical fundamentals and development of technology in the field of bulk crystallization on both industrial and research scales are explored. After an introductory chapter on the formation of minerals, ruling historically the basic crystal formation parameters, advanced basic technologies from melt, solution, and vapour being applied for research and production of the today most important materials, like silicon, semiconductor compounds and oxides are presented in detail. The interdisciplinary and general importance of crystal growth for human live are illustrated.Vol 2B: Growth Mechanisms and DynamicsHandbook of Crystal Growth, Second Edition Volume IIB (Growth Mechanisms and Dynamics) deals with characteristic mechanisms and dynamics accompanying each bulk crystal growth method discussed in Volume IIA. Before the atoms or molecules pass over from a position in the fluid medium (gas, melt or solution) to their place in the crystalline face they must be transported in the fluid over macroscopic distances by diffusion, buoyancy-driven convection, surface-tension-driven convection, and forced convection (rotation, acceleration, vibration, magnetic mixing). Further, the heat of fusion and the part carried by the species on their way to the crystal by conductive and convective transport must be dissipated in the solid phase by well-organized thermal conduction and radiation to maintain a stable propagating interface. Additionally, segregation and capillary phenomena play a decisional role for chemical composition and crystal shaping, respectively. Today, the increase of high-quality crystal yield, its size enlargement and reproducibility are imperative conditions to match the strong economy.Volume 2A - Presents the status and future of Czochralski and float zone growth of dislocation-free silicon - Examines directional solidification of silicon ingots for photovoltaics, vertical gradient freeze of GaAs, CdTe for HF electronics and IR imaging as well as antiferromagnetic compounds and super alloys for turbine blades - Focuses on growth of dielectric and conducting oxide crystals for lasers and non-linear optics - Topics on hydrothermal, flux and vapour phase growth of III-nitrides, silicon carbide and diamond are explored Volume 2B - Explores capillarity control of the crystal shape at the growth from the melt - Highlights modeling of heat and mass transport dynamics - Discusses control of convective melt processes by magnetic fields and vibration measures - Includes imperative information on the segregation phenomenon and validation of compositional homogeneity - Examines crystal defect generation mechanisms and their controllability - Illustrates proper automation modes for ensuring constant crystal growth process - Exhibits fundamentals of solution growth, gel growth of protein crystals, growth of superconductor materials and mass crystallization for food and pharmaceutical industries

Download or read book Epitaxy written by Marian A. Herman and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a uniform and comprehensive manner the authors describe all the important aspects of the epitaxial growth processes of solid films on crystalline substrates, e.g. processes in which atoms of the growing film mimic the arrangement of the atoms of the substrate. Emphasis is put on sufficiently fundamental and unequivocal presentation of the subject in the form of an easy-to-read review. A large part of this book focuses on the problems of heteroepitaxy. The most important epitaxial growth techniques which are currently widely used in basic research as well as in manufacturing processes of devices are presented and discussed in detail.

Download or read book Handbook of Crystal Growth written by Tom Kuech and published by Elsevier. This book was released on 2014-11-02 with total page 1384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume IIIA Basic TechniquesHandbook of Crystal Growth, Second Edition Volume IIIA (Basic Techniques), edited by chemical and biological engineering expert Thomas F. Kuech, presents the underpinning science and technology associated with epitaxial growth as well as highlighting many of the chief and burgeoning areas for epitaxial growth. Volume IIIA focuses on major growth techniques which are used both in the scientific investigation of crystal growth processes and commercial development of advanced epitaxial structures. Techniques based on vacuum deposition, vapor phase epitaxy, and liquid and solid phase epitaxy are presented along with new techniques for the development of three-dimensional nano-and micro-structures.Volume IIIB Materials, Processes, and TechnologyHandbook of Crystal Growth, Second Edition Volume IIIB (Materials, Processes, and Technology), edited by chemical and biological engineering expert Thomas F. Kuech, describes both specific techniques for epitaxial growth as well as an array of materials-specific growth processes. The volume begins by presenting variations on epitaxial growth process where the kinetic processes are used to develop new types of materials at low temperatures. Optical and physical characterizations of epitaxial films are discussed for both in situ and exit to characterization of epitaxial materials. The remainder of the volume presents both the epitaxial growth processes associated with key technology materials as well as unique structures such as monolayer and two dimensional materials.Volume IIIA Basic Techniques - Provides an introduction to the chief epitaxial growth processes and the underpinning scientific concepts used to understand and develop new processes. - Presents new techniques and technologies for the development of three-dimensional structures such as quantum dots, nano-wires, rods and patterned growth - Introduces and utilizes basic concepts of thermodynamics, transport, and a wide cross-section of kinetic processes which form the atomic level text of growth process Volume IIIB Materials, Processes, and Technology - Describes atomic level epitaxial deposition and other low temperature growth techniques - Presents both the development of thermal and lattice mismatched streams as the techniques used to characterize the structural properties of these materials - Presents in-depth discussion of the epitaxial growth techniques associated with silicone silicone-based materials, compound semiconductors, semiconducting nitrides, and refractory materials

Download or read book Epitaxial Growth Processes written by and published by . This book was released on 1994 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Growth Processes and Surface Phase Equilibria in Molecular Beam Epitaxy written by Nikolai N. Ledentsov and published by Springer Science & Business Media. This book was released on 1999-07-02 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book considers the main growth-related phenomena occurring during epitaxial growth, such as thermal etching, doping, segregation of the main elements and impurities, coexistence of several phases at the crystal surface and segregation-enhanced diffusion. It is complete with tables, graphs and figures, which allow fast determination of suitable growth parameters for practical applications.

Download or read book Epitaxy of Semiconductors written by Udo W. Pohl and published by Springer Nature. This book was released on 2020-07-20 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extended and revised edition of this textbook provides essential information for a comprehensive upper-level graduate course on the crystalline growth of semiconductor heterostructures. Heteroepitaxy is the basis of today’s advanced electronic and optoelectronic devices, and it is considered one of the most important fields in materials research and nanotechnology. The book discusses the structural and electronic properties of strained epitaxial layers, the thermodynamics and kinetics of layer growth, and it describes the major growth techniques: metalorganic vapor-phase epitaxy, molecular-beam epitaxy, and liquid-phase epitaxy. It also examines in detail cubic and hexagonal semiconductors, strain relaxation by misfit dislocations, strain and confinement effects on electronic states, surface structures, and processes during nucleation and growth. Requiring only minimal knowledge of solid-state physics, it provides natural sciences, materials science and electrical engineering students and their lecturers elementary introductions to the theory and practice of epitaxial growth, supported by references and over 300 detailed illustrations. In this second edition, many topics have been extended and treated in more detail, e.g. in situ growth monitoring, application of surfactants, properties of dislocations and defects in organic crystals, and special growth techniques like vapor-liquid-solid growth of nanowires and selective-area epitaxy.

Download or read book Electronic Materials written by L.S. Miller and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic materials are a dominant factor in many areas of modern technology. The need to understand'them is paramount; this book addresses that need. The main aim of this volume is to provide a broad unified view of electronic materials, including key aspects of their science and technology and also, in many cases, their commercial implications. It was considered important that much of the contents of such an overview should be intelligible by a broad audience of graduates and industrial scientists, and relevant to advanced undergraduate studies. It should also be up to date and even looking forward to the future. Although more extensive, and written specifically as a text, the resulting book has much in common with a short course of the same name given at Coventry Polytechnic. The interpretation of the term "electronic materials" used in this volume is a very broad one, in line with the initial aim. The principal restriction is that, with one or two minor exceptions relating to aspects of device processing, for example, the materials dealt with are all active materials. Materials such as simple insulators or simple conductors, playing only a passive role, are not singled out for consider ation. Active materials might be defined as those involved in the processing of signals in a way that depends crucially on some specific property of those materials, and the immediate question then concerns the types of signals that might be considered.

Download or read book Epitaxial Growth Processes written by and published by . This book was released on 1994 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Epitaxial Growth Processes written by Chris J. Palmstrøm and published by . This book was released on 1994 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Organometallic Vapor Phase Epitaxy written by Gerald B. Stringfellow and published by Elsevier. This book was released on 2012-12-02 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is one of the first single-author treatments of organometallic vapor-phase epitaxy (OMVPE)--a leading technique for the fabrication of semiconductor materials and devices. Also included are metal-organic molecular-beam epitaxy (MOMBE) and chemical-beam epitaxy (CBE) ultra-high-vacuum deposition techniques using organometallic source molecules. Of interest to researchers, students, and people in the semiconductor industry, this book provides a basic foundation for understanding the technique and the application of OMVPE for the growth of both III-V and II-VI semiconductor materials and the special structures required for device applications. In addition, a comprehensive summary detailing the OMVPE results observed to date in a wide range of III-V and II-VI semiconductors is provided. This includes a comparison of results obtained through the use of other epitaxial techniques such as molecular beam epitaxy (MBE), liquid-phase epitaxy (LPE), and vapor phase epitaxy using halide transport.

Download or read book Morphological Organization in Epitaxial Growth and Removal written by Zhenyu Zhang and published by World Scientific. This book was released on 1998 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a critical assessment of the current status and the likely future directions of thin-film growth, an area of exceptional technological importance. Its emphasis is on descriptions of the atomic-scale mechanisms controlling the dynamics and thermodynamics of the morphological evolution of the growth front of thin films in diverse systems of fundamental and technological significance. The book covers most of the original and important conceptual developments made in the 1990s. The articles, written by leading experts, are arranged in five major categories ? the theoretical basis, semiconductor-on-semiconductor growth, metal-on-metal growth, metal-on-semiconductor growth, and removal as the inverse process of growth. This book, the only one of its kind in this decade, will prove to be an indispensable reference source for active researchers, those having peripheral interest, and graduate students starting out in the field.

Download or read book Metalorganic Vapor Phase Epitaxy MOVPE written by Stuart Irvine and published by John Wiley & Sons. This book was released on 2019-10-07 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systematically discusses the growth method, material properties, and applications for key semiconductor materials MOVPE is a chemical vapor deposition technique that produces single or polycrystalline thin films. As one of the key epitaxial growth technologies, it produces layers that form the basis of many optoelectronic components including mobile phone components (GaAs), semiconductor lasers and LEDs (III-Vs, nitrides), optical communications (oxides), infrared detectors, photovoltaics (II-IV materials), etc. Featuring contributions by an international group of academics and industrialists, this book looks at the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring. It covers the most important materials from III-V and II-VI compounds to quantum dots and nanowires, including sulfides and selenides and oxides/ceramics. Sections in every chapter of Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications cover the growth of the particular materials system, the properties of the resultant material, and its applications. The book offers information on arsenides, phosphides, and antimonides; nitrides; lattice-mismatched growth; CdTe, MCT (mercury cadmium telluride); ZnO and related materials; equipment and safety; and more. It also offers a chapter that looks at the future of the technique. Covers, in order, the growth method, material properties, and applications for each material Includes chapters on the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring Looks at important materials such as III-V and II-VI compounds, quantum dots, and nanowires Provides topical and wide-ranging coverage from well-known authors in the field Part of the Materials for Electronic and Optoelectronic Applications series Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications is an excellent book for graduate students, researchers in academia and industry, as well as specialist courses at undergraduate/postgraduate level in the area of epitaxial growth (MOVPE/ MOCVD/ MBE).

Download or read book Advanced Semiconductor Epitaxial Growth Processes and Lateral and Vertical Fabrication written by and published by . This book was released on 1992 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Springer Handbook of Electronic and Photonic Materials written by Safa Kasap and published by Springer. This book was released on 2017-10-04 with total page 1536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second, updated edition of this essential reference book provides a wealth of detail on a wide range of electronic and photonic materials, starting from fundamentals and building up to advanced topics and applications. Its extensive coverage, with clear illustrations and applications, carefully selected chapter sequencing and logical flow, makes it very different from other electronic materials handbooks. It has been written by professionals in the field and instructors who teach the subject at a university or in corporate laboratories. The Springer Handbook of Electronic and Photonic Materials, second edition, includes practical applications used as examples, details of experimental techniques, useful tables that summarize equations, and, most importantly, properties of various materials, as well as an extensive glossary. Along with significant updates to the content and the references, the second edition includes a number of new chapters such as those covering novel materials and selected applications. This handbook is a valuable resource for graduate students, researchers and practicing professionals working in the area of electronic, optoelectronic and photonic materials.

Download or read book Molecular Beam Epitaxy written by Marian A. Herman and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first-ever monograph on molecular beam epitaxy (MBE) gives a comprehensive presentation of recent developments in MBE, as applied to crystallization of thin films and device structures of different semiconductor materials. MBE is a high-vacuum technology characterized by relatively low growth temperature, ability to cease or initiate growth abruptly, smoothing of grown surfaces and interfaces on an atomic scale, and the unique facility for in situ analysis of the structural parameters of the growing film. The excellent exploitation parameters of such MBE-produced devices as quantum-well lasers, high electron mobility transistors, and superlattice avalanche photodiodes have caused this technology to be intensively developed. The main text of the book is divided into three parts. The first presents and discusses the more important problems concerning MBE equipment. The second discusses the physico-chemical aspects of the crystallization processes of different materials (mainly semiconductors) and device structures. The third part describes the characterization methods which link the physical properties of the grown film or structures with the technological parameters of the crystallization procedure. Latest achievements in the field are emphasized, such as solid source MBE, including silicon MBE, gas source MBE, especially metalorganic MBE, phase-locked epitaxy and atomic-layer epitaxy, photoassisted molecular layer epitaxy and migration enhanced epitaxy.

Download or read book Silicon Epitaxy written by and published by Elsevier. This book was released on 2001-09-26 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its inception in 1966, the series of numbered volumes known as Semiconductors and Semimetals has distinguished itself through the careful selection of well-known authors, editors, and contributors. The Willardson and Beer series, as it is widely known, has succeeded in producing numerous landmark volumes and chapters. Not only did many of these volumes make an impact at the time of their publication, but they continue to be well-cited years after their original release. Recently, Professor Eicke R. Weber of the University of California at Berkeley joined as a co-editor of the series. Professor Weber, a well-known expert in the field of semiconductor materials, will further contribute to continuing the series' tradition of publishing timely, highly relevant, and long-impacting volumes. Some of the recent volumes, such as Hydrogen in Semiconductors, Imperfections in III/V Materials, Epitaxial Microstructures, High-Speed Heterostructure Devices, Oxygen in Silicon, and others promise that this tradition will be maintained and even expanded.

Download or read book Low Temperature Epitaxial Growth of Semiconductors written by Takashi Hariu and published by World Scientific. This book was released on 1991 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low temperature processes for semiconductors have been recently under intensive development to fabricate controlled device structures with minute dimensions in order to achieve the highest device performance and new device functions as well as high integration density. Comprising reviews by experts long involved in the respective pioneering work, this volume makes a useful contribution toward maturing the process of low temperature epitaxy as a whole.