Download or read book Engineering Vibration Analysis with Application to Control Systems written by C. Beards and published by Elsevier. This book was released on 1995-06-17 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most machines and structures are required to operate with low levels of vibration as smooth running leads to reduced stresses and fatigue and little noise. This book provides a thorough explanation of the principles and methods used to analyse the vibrations of engineering systems, combined with a description of how these techniques and results can be applied to the study of control system dynamics. Numerous worked examples are included, as well as problems with worked solutions, and particular attention is paid to the mathematical modelling of dynamic systems and the derivation of the equations of motion. All engineers, practising and student, should have a good understanding of the methods of analysis available for predicting the vibration response of a system and how it can be modified to produce acceptable results. This text provides an invaluable insight into both.
Download or read book Engineering Vibration Analysis with Application to Control Systems written by C. F. Beards and published by Hodder & Stoughton Limited. This book was released on 1995-01-01 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the principles and methods used to analyze the vibrations of engineering systems, combined with a description of how these techniques and results can be applied to the study of control system dynamics. This is a text for
Download or read book Engineering Vibration Analysis written by Valery A. Svetlitsky and published by Springer Science & Business Media. This book was released on 2012-11-07 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory of vibrations belongs to principal subjects needed for training mechani cal engineers in technological universities. Therefore, the basic goal of the mono graph "Advanced Theory of Vibrations 1" is to help students studying vibration theory for gaining experience in application of this theory for solving particular problems. Thus, while choosing the problems and methods to solve them, the close attention was paid to the applied content of vibration theory. The monograph is devoted to systems with a single degree of freedom and sys tems with a finite number of degrees of freedom. In particular, problems are for mulated associated with determination of frequencies and forms of vibrations, study of forced vibrations, analysis of both stable and unstable vibrations (includ ing those caused by periodic but anharmonic forces). The problems of nonlinear vibrations and of vibration stability, and those related to seeking probabilistic characteristics for solutions to these problems in the case of random forces are also considered. Problems related to parametric vibrations and statistical dynamics of mechanical systems, as well as to determination of critical parameters and of dy namic stability are also analyzed. As a rule, problems presented in the monograph are associated with particular mechanical systems and can be applied for current studies in vibration theory. Al lowing for interests of students independently studying theory of vibrations, the majority of problems are supplied with either detailed solutions or algorithms of the solutions.
Download or read book Mechanical Vibration written by Haym Benaroya and published by CRC Press. This book was released on 2017-08-29 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration: Analysis, Uncertainties, and Control, Fourth Edition addresses the principles and application of vibration theory. Equations for modeling vibrating systems are explained, and MATLAB® is referenced as an analysis tool. The Fourth Edition adds more coverage of damping, new case studies, and development of the control aspects in vibration analysis. A MATLAB appendix has also been added to help students with computational analysis. This work includes example problems and explanatory figures, biographies of renowned contributors, and access to a website providing supplementary resources.
Download or read book Noise and Vibration Control Engineering written by István L. Vér and published by John Wiley & Sons. This book was released on 2005-11-11 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noise and Vibration Control Engineering: Principles and Applications, Second Edition is the updated revision of the classic reference containing the most important noise control design information in a single volume of manageable size. Specific content updates include completely revised material on noise and vibration standards, updated information on active noise/vibration control, and the applications of these topics to heating, ventilating, and air conditioning.
Download or read book Vibrations and Control Systems written by C. F. Beards and published by . This book was released on 1988 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration Theory and Applications with Finite Elements and Active Vibration Control written by Alan Palazzolo and published by John Wiley & Sons. This book was released on 2016-01-11 with total page 973 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on many years of research and teaching, this book brings together all the important topics in linear vibration theory, including failure models, kinematics and modeling, unstable vibrating systems, rotordynamics, model reduction methods, and finite element methods utilizing truss, beam, membrane and solid elements. It also explores in detail active vibration control, instability and modal analysis. The book provides the modeling skills and knowledge required for modern engineering practice, plus the tools needed to identify, formulate and solve engineering problems effectively.
Download or read book Vibration Analysis and Control System Dynamics written by C. F. Beards and published by . This book was released on 1981 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration Analysis and Control in Mechanical Structures and Wind Energy Conversion Systems written by Francisco Beltran-Carbajal and published by BoD – Books on Demand. This book was released on 2018-04-18 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on recent and innovative methods on vibration analysis, system identification, and diverse control design methods for both wind energy conversion systems and vibrating systems. Advances on both theoretical and experimental studies about analysis and control of oscillating systems in several engineering disciplines are discussed. Various control devices are synthesized and implemented for vibration attenuation tasks. The book is addressed to researchers and practitioners on the subject, as well as undergraduate and postgraduate students and other experts and newcomers seeking more information about the state of the art, new challenges, innovative solutions, and new trends and developments in these areas. The six chapters of the book cover a wide range of interesting issues related to modeling, vibration control, parameter identification, active vehicle suspensions, tuned vibration absorbers, electronically controlled wind energy conversion systems, and other relevant case studies.
Download or read book Responsive Systems for Active Vibration Control written by A. Preumont and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural vibrations have become the critical factor limiting the performance of many engineering systems, typical amplitudes ranging from meters to a few nanometers. Many acoustic nuisances in transportation systems and residential and office buildings are also related to structural vibrations. The active control of such vibrations involves nine orders of magnitude of vibration amplitude, which exerts a profound influence on the technology. Active vibration control is highly multidisciplinary, involving structural vibration, acoustics, signal processing, materials science, and actuator and sensor technology. Chapters 1-3 of this book provide a state-of-the-art introduction to active vibration control, active sound control, and active vibroacoustic control, respectively. Chapter 4 discusses actuator/sensor placement, Chapter 5 deals with robust control of vibrating structures, Chapter 6 discusses finite element modelling of piezoelectric continua and Chapter 7 addresses the latest trends in piezoelectric multiple-degree-of-freedom actuators/sensors. Chapters 8-12 deal with example applications, including semi-active joints, active isolation and health monitoring. Chapter 13 addresses MEMS technology, while Chapter 14 discusses the design of power amplifiers for piezoelectric actuators.
Download or read book Vibration Damping Control and Design written by Clarence W. de Silva and published by CRC Press. This book was released on 2007-04-05 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reducing and controlling the level of vibration in a mechanical system leads to an improved work environment and product quality, reduced noise, more economical operation, and longer equipment life. Adequate design is essential for reducing vibrations, while damping and control methods help further reduce and manipulate vibrations when design strat
Download or read book Vibration written by Clarence W. de Silva and published by CRC Press. This book was released on 2006-09-14 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintaining the outstanding features and practical approach that led the bestselling first edition to become a standard textbook in engineering classrooms worldwide, Clarence de Silva's Vibration: Fundamentals and Practice, Second Edition remains a solid instructional tool for modeling, analyzing, simulating, measuring, monitoring, testing, control
Download or read book Structural Dynamics written by Henry R. Busby and published by CRC Press. This book was released on 2017-08-15 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Dynamics: Concepts and Applications focuses on dynamic problems in mechanical, civil and aerospace engineering through the equations of motion. The text explains structural response from dynamic loads and the modeling and calculation of dynamic responses in structural systems. A range of applications is included, from various engineering disciplines. Coverage progresses consistently from basic to advanced, with emphasis placed on analytical methods and numerical solution techniques. Stress analysis is discussed, and MATLAB applications are integrated throughout. A solutions manual and figure slides for classroom projection are available for instructors.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1985 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration and Shock Handbook written by Clarence W. de Silva and published by CRC Press. This book was released on 2005-06-27 with total page 1837 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every so often, a reference book appears that stands apart from all others, destined to become the definitive work in its field. The Vibration and Shock Handbook is just such a reference. From its ambitious scope to its impressive list of contributors, this handbook delivers all of the techniques, tools, instrumentation, and data needed to model, analyze, monitor, modify, and control vibration, shock, noise, and acoustics. Providing convenient, thorough, up-to-date, and authoritative coverage, the editor summarizes important and complex concepts and results into “snapshot” windows to make quick access to this critical information even easier. The Handbook’s nine sections encompass: fundamentals and analytical techniques; computer techniques, tools, and signal analysis; shock and vibration methodologies; instrumentation and testing; vibration suppression, damping, and control; monitoring and diagnosis; seismic vibration and related regulatory issues; system design, application, and control implementation; and acoustics and noise suppression. The book also features an extensive glossary and convenient cross-referencing, plus references at the end of each chapter. Brimming with illustrations, equations, examples, and case studies, the Vibration and Shock Handbook is the most extensive, practical, and comprehensive reference in the field. It is a must-have for anyone, beginner or expert, who is serious about investigating and controlling vibration and acoustics.
Download or read book Structural Vibration written by C. Beards and published by Elsevier. This book was released on 1996-05-31 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many structures suffer from unwanted vibrations and, although careful analysis at the design stage can minimise these, the vibration levels of many structures are excessive. In this book the entire range of methods of control, both by damping and by excitation, is described in a single volume.Clear and concise descriptions are given of the techniques for mathematically modelling real structures so that the equations which describe the motion of such structures can be derived. This approach leads to a comprehensive discussion of the analysis of typical models of vibrating structures excited by a range of periodic and random inputs. Careful consideration is also given to the sources of excitation, both internal and external, and the effects of isolation and transmissability. A major part of the book is devoted to damping of structures and many sources of damping are considered, as are the ways of changing damping using both active and passive methods. The numerous worked examples liberally distributed throughout the text, amplify and clarify the theoretical analysis presented. Particular attention is paid to the meaning and interpretation of results, further enhancing the scope and applications of analysis. Over 80 problems are included with answers and worked solutions to most. This book provides engineering students, designers and professional engineers with a detailed insight into the principles involved in the analysis and damping of structural vibration while presenting a sound theoretical basis for further study.Suitable for students of engineering to first degree level and for designers and practising engineersNumerous worked examplesClear and easy to follow
Download or read book Vibration Control and Actuation of Large Scale Systems written by Hamid Reza Karimi and published by Academic Press. This book was released on 2020-05-20 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration Control and Actuation of Large-Scale Systems gives a systematically and self-contained description of the many facets of envisaging, designing, implementing, or experimentally exploring advanced vibration control systems. The book is devoted to the development of mathematical methodologies for vibration analysis and control problems of large-scale systems, including structural dynamics, vehicle dynamics and wind turbines, for example. The research problems addressed in each chapter are well motivated, with numerical and simulation results given in each chapter that reflect best engineering practice. Provides a series of the latest results in vibration control, structural control, actuation, component failures, and more Gives numerical and simulation results to reflect best engineering practice Presents recent advances of theory, technological aspects, and applications of advanced control methodologies in vibration control
