Download or read book Engineering Turbulence Modelling and Experiments 2 written by F. Martelli and published by Elsevier. This book was released on 2014-06-28 with total page 1001 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today understanding turbulence is one of the key issues in tackling flow problems in engineering. Powerful computers and numerical methods are now available for solving flow equations, but the simulation of turbulence effects, which are nearly always important in practice, are still at an early stage of development. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulence momentum, heat and mass transfer. The 89 papers, including 5 invited papers, in this volume present and discuss new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. The high standard of the contributions on the developing and testing of turbulent models attests to the world-wide interest this domain is currently attracting from researchers.
Download or read book Engineering Turbulence Modelling and Experiments 5 written by W. Rodi and published by Elsevier. This book was released on 2002-08-21 with total page 1029 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence is one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends increasingly on the performance of the turbulence models. This series of symposia provides a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. The papers in this set of proceedings were presented at the 5th International Symposium on Engineering Turbulence Modelling and Measurements in September 2002. They look at a variety of areas, including: Turbulence modelling; Direct and large-eddy simulations; Applications of turbulence models; Experimental studies; Transition; Turbulence control; Aerodynamic flow; Aero-acoustics; Turbomachinery flows; Heat transfer; Combustion systems; Two-phase flows. These papers are preceded by a section containing 6 invited papers covering various aspects of turbulence modelling and simulation as well as their practical application, combustion modelling and particle-image velocimetry.
Download or read book Engineering Turbulence Modelling and Experiments 6 written by Wolfgang Rodi and published by Elsevier. This book was released on 2005-05-05 with total page 1011 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the world renowned ERCOFTAC (International Symposium on Engineering Turbulence Modelling and Measurements). The proceedings include papers dealing with the following areas of turbulence: · Eddy-viscosity and second-order RANS models · Direct and large-eddy simulations and deductions for conventional modelling · Measurement and visualization techniques, experimental studies · Turbulence control · Transition and effects of curvature, rotation and buoyancy on turbulence · Aero-acoustics · Heat and mass transfer and chemically reacting flows · Compressible flows, shock phenomena · Two-phase flows · Applications in aerospace engineering, turbomachinery and reciprocating engines, industrial aerodynamics and wind engineering, and selected chemical engineering problems Turbulence remains one of the key issues in tackling engineering flow problems. These problems are solved more and more by CFD analysis, the reliability of which depends strongly on the performance of the turbulence models employed. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation. As in other fields of Science, in the rapidly developing discipline of turbulence, swift progress can be achieved only by keeping up to date with recent advances all over the world and by exchanging ideas with colleagues active in related fields.
Download or read book Engineering Turbulence Modelling and Experiments 4 written by D. Laurence and published by Elsevier. This book was released on 1999-04-14 with total page 975 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain the papers presented at the 4th International Symposium on Engineering Turbulence Modelling and Measurements held at Ajaccio, Corsica, France from 24-26 May 1999. It follows three previous conferences on the topic of engineering turbulence modelling and measurements. The purpose of this series of symposia is to provide a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. Turbulence is still one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends more and more on the performance of the turbulence models. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation.
Download or read book Engineering Turbulence Modelling and Experiments 3 written by G. Bergeles and published by Newnes. This book was released on 2012-12-02 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents and discussses new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. At present, turbulence is one of the key issues in tackling engineering flow problems. Powerful computers and numerical methods are now available for solving the flow equations, but the simulation of turbulence effects which are nearly always important in practice, is still in an unsatisfactory state and introduces considerable uncertainities in the accuracy of CFD calculations. These and other aspects of turbulence modelling and measurements are dealt with in detail by experts in the field. The resulting book is an up-to-date review of the most recent research in this exciting area.
Download or read book Engineering Turbulence Modelling and Experiments 6 written by Wolfgang Rodi and published by Elsevier Science. This book was released on 2005 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the world renowned ERCOFTAC (International Symposium on Engineering Turbulence Modelling and Measurements). The proceedings include papers dealing with the following areas of turbulence: � Eddy-viscosity and second-order RANS models � Direct and large-eddy simulations and deductions for conventional modelling � Measurement and visualization techniques, experimental studies � Turbulence control � Transition and effects of curvature, rotation and buoyancy on turbulence � Aero-acoustics � Heat and mass transfer and chemically reacting flows � Compressible flows, shock phenomena � Two-phase flows � Applications in aerospace engineering, turbomachinery and reciprocating engines, industrial aerodynamics and wind engineering, and selected chemical engineering problems Turbulence remains one of the key issues in tackling engineering flow problems. These problems are solved more and more by CFD analysis, the reliability of which depends strongly on the performance of the turbulence models employed. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation. As in other fields of Science, in the rapidly developing discipline of turbulence, swift progress can be achieved only by keeping up to date with recent advances all over the world and by exchanging ideas with colleagues active in related fields.
Download or read book Engineering Turbulence Modelling and Experiments written by and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling Turbulence in Engineering and the Environment written by Kemal Hanjalić and published by Cambridge University Press. This book was released on 2011-10-20 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive account of advanced RANS turbulence models including numerous applications to complex flows in engineering and the environment.
Download or read book Fundamentals Of Turbulence Modelling written by Ching Jen Chen and published by CRC Press. This book was released on 1997-12-01 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on the second-order turbulence-closure model and its applications to engineering problems. Topics include turbulent motion and the averaging process, near-wall turbulence, applications of turbulence models, and turbulent buoyant flows.
Download or read book Workshop on Engineering Turbulence Modeling written by and published by . This book was released on 1992 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Workshop on Engineering Turbulence Modeling written by and published by . This book was released on 1992 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling Turbulence in Engineering and the Environment written by Kemal Hanjalić and published by Cambridge University Press. This book was released on 2022-11-24 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling transport and mixing by turbulence in complex flows are huge challenges for computational fluid dynamics (CFD). This highly readable book introduces readers to modelling levels that respect the physical complexity of turbulent flows. It examines the hierarchy of Reynolds-averaged Navier-Stokes (RANS) closures in various situations ranging from fundamental flows to three-dimensional industrial and environmental applications. The general second-moment closure is simplified to linear eddy-viscosity models, demonstrating how to assess the applicability of simpler schemes and the conditions under which they give satisfactory predictions. The principal changes for the second edition reflect the impact of computing power: a new chapter devoted to unsteady RANS and another on how large-eddy simulation, LES, and RANS strategies can be effectively combined for particular applications. This book will remain the standard for those in industry and academia seeking expert guidance on the modelling options available, and for graduate students in physics, applied mathematics and engineering entering the world of turbulent flow CFD.
Download or read book Instability Transition and Turbulence written by M.Y. Hussaini and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the Workshop on In stability, Transition and Turbulence, sponsored by the Institute for Computer Applications in Science and Engineering (ICASE) and the NASA Langley Research Center (LaRC), during July 8 to August 2, 1991. This is the second workshop in the series on the subject. The first was held in 1989, and its proceedings were published by Springer-Verlag under the title "Instability and Transition" edited by M. Y. Hussaini and R. G. Voigt. The objectives of these work shops are to i) expose the academic community to current technologically im portant issues of transition and turbulence in shear flows over the entire speed range, ii) acquaint the academic community with the unique combination of theoretical, computational and experimental capabilities at LaRC and foster interaction with these capabilities, and iii) accelerate progress in elucidating the fundamental phenomena of transition and turbulence, leading to improved transition and turbulence modeling in design methodologies. The research areas covered in these proceedings include receptiv ity and roughness, nonlinear theories of transition, numerical simu lation of spatially evolving flows, modelling of transitional and fully turbulent flows as well as some experiments on instability and tran sition. In addition a one-day mini-symposium was held to discuss 1 recent and planned experiments on turbulent flow over a backward facing step.
Download or read book Advanced Approaches in Turbulence written by Paul Durbin and published by Elsevier. This book was released on 2021-07-30 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Front Cover -- Advanced Approaches in Turbulence -- Copyright -- Contents -- Contributors -- Preface -- 1 Basics of turbulence -- 1.1 Introduction -- 1.2 Eddy diffusion -- 1.3 Scales of turbulence -- 1.3.1 Isotropic decay -- 1.3.2 Stretching and diffusion of vorticity -- 1.4 Spectral equations -- 1.4.1 Isotropic turbulence -- 1.4.2 Shear and streaks -- 1.5 Averaged equations -- 1.5.1 Jets -- 1.5.2 Boundary layer -- 1.6 The form of turbulence models -- 1.6.1 Two equation models -- 1.6.2 Reynolds stress transport -- 1.7 Conclusion -- References -- 2 Direct numerical and large-eddy simulation of complex turbulent flows -- 2.1 Introduction -- 2.2 Error as a function of scale -- 2.2.1 Modified wavenumber -- 2.2.2 Nonlinear sources of error -- 2.2.3 Time advancement error as a function of scale -- 2.3 Analysis of numerical errors in large-eddy simulation using statistical closure theory -- 2.3.1 EDQNM closure -- 2.3.2 EDQNM-LES and the inclusion of numerical error -- 2.3.3 EDQNM model -- 2.3.4 Relative magnitudes of error -- 2.4 Simulations in complex geometries -- 2.4.1 Decay of isotropic turbulence -- 2.4.2 Gas turbine combustor -- 2.5 Simulating the flow around moving bodies -- 2.5.1 Fluid phase -- 2.5.2 Solid phase -- 2.5.3 The effects of interpolation -- 2.5.4 Particles in a turbulent channel -- 2.6 What is a 'canonical' flow? -- 2.6.1 Jets in crossflow -- 2.6.2 DNS of turbulent channel flow over random rough surfaces -- 2.7 The analysis of 'big data' -- 2.7.1 DMD of large datasets and numerical error -- 2.7.2 Analysis of wall-pressure fluctuation sources in turbulent channel flow -- 2.8 Bridging the Reynolds number divide -- 2.9 Concluding remarks -- Acknowledgments -- References -- 3 Large-eddy simulations -- 3.1 Introduction -- 3.1.1 Motivation -- 3.2 Governing equations -- 3.2.1 Filtering.
Download or read book Computation and Comparison of Efficient Turbulence Models for Aeronautics European Research Project ETMA written by Alain Dervieux and published by Springer Science & Business Media. This book was released on 1998-08-27 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains contributions to the BRITE-EURAM 3rd Framework Programme ETMA and extended articles of the TMA-Workshop. It focusses on turbulence modelling techniques suitable to use in typical flow configurations, with emphasis on compressibility effects and inherent unsteadiness. These methodologies are applied to the Navier-Stokes equations, involving various turbulence modelling levels from algebraic to RSM. Basic turbulent flows in aeronautics are considered; mixing layers, wall-flows (flat-plate, backward-facing step, ramp, bump), and more complex configurations (bump, aerofoil). A critical assessment of the turbulence modelling performances is offered, based on previous results and on the experimental data-base of this research programme. The ETMA results figure in the data-base constituted by all partners and organized by INRIA
Download or read book Turbulent Flows written by G. Biswas and published by CRC Press. This book was released on 2002 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book allows readers to tackle the challenges of turbulent flow problems with confidence. It covers the fundamentals of turbulence, various modeling approaches, and experimental studies. The fundamentals section includes isotropic turbulence and anistropic turbulence, turbulent flow dynamics, free shear layers, turbulent boundary layers and plumes. The modeling section focuses on topics such as eddy viscosity models, standard K-E Models, Direct Numerical Stimulation, Large Eddy Simulation, and their applications. The measurement of turbulent fluctuations experiments in isothermal and stratified turbulent flows are explored in the experimental methods section. Special topics include modeling of near wall turbulent flows, compressible turbulent flows, and more.
Download or read book Turbulence Modelling Approaches written by Konstantin Volkov and published by BoD – Books on Demand. This book was released on 2017-07-26 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accurate prediction of turbulent flows remains a challenging task despite considerable work in this area and the acceptance of CFD as a design tool. The quality of the CFD calculations of the flows in engineering applications strongly depends on the proper prediction of turbulence phenomena. Investigations of flow instability, heat transfer, skin friction, secondary flows, flow separation, and reattachment effects demand a reliable modelling and simulation of the turbulence, reliable methods, accurate programming, and robust working practices. The current scientific status of simulation of turbulent flows as well as some advances in computational techniques and practical applications of turbulence research is reviewed and considered in the book.
