Download or read book Mechanical Engineering Technologies and Applications Volume 2 written by Zied Driss and published by Bentham Science Publishers. This book was released on 2023-11-30 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 2 includes the following topics: Numerical investigation of turbulent slot jets with various nanoparticle shapes Experimental study on a sweeping gas membrane distillation unit Development of design processes for multi-spindle drilling using a neural network and expert systems Experimental investigation of a new hybrid solar collector (PV/t) system Theoretical study of the effects of combustion duration on engine performance Effects of preheating temperature and fuel-air equivalence ratio on pollution control in hydrocarbon combustion Numerical study of natural convection between two concentric ellipses with different shapes and imposed temperatures Theoretical study of the geometrical parameters effect on the behavior of a solar chimney power plant Numerical investigations of the effect of packed bed porosity on the flow behavior Comparison between a conventional and a four-stage Savonius wind rotor The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology.
Download or read book Lattice Engineering written by Shumin Wang and published by CRC Press. This book was released on 2012-11-27 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains comprehensive reviews of different technologies to harness lattice mismatch in semiconductor heterostructures and their applications in electronic and optoelectronic devices. While the book is a bit focused on metamorphic epitaxial growth, it also includes other methods like compliant substrate, selective area growth, wafer bonding, heterostructure nanowires, and more. Basic knowledge on dislocations in semiconductors and innovative methods to eliminate threading dislocations are provided, and successful device applications are reviewed. It covers a variety of important semiconductor materials like SiGe, III-V including GaN and nano-wires; epitaxial methods like molecular beam epitaxy and metal organic vapor phase epitaxy; and devices like transistors and lasers etc.
Download or read book A Framework for K 12 Science Education written by National Research Council and published by National Academies Press. This book was released on 2012-02-28 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science, engineering, and technology permeate nearly every facet of modern life and hold the key to solving many of humanity's most pressing current and future challenges. The United States' position in the global economy is declining, in part because U.S. workers lack fundamental knowledge in these fields. To address the critical issues of U.S. competitiveness and to better prepare the workforce, A Framework for K-12 Science Education proposes a new approach to K-12 science education that will capture students' interest and provide them with the necessary foundational knowledge in the field. A Framework for K-12 Science Education outlines a broad set of expectations for students in science and engineering in grades K-12. These expectations will inform the development of new standards for K-12 science education and, subsequently, revisions to curriculum, instruction, assessment, and professional development for educators. This book identifies three dimensions that convey the core ideas and practices around which science and engineering education in these grades should be built. These three dimensions are: crosscutting concepts that unify the study of science through their common application across science and engineering; scientific and engineering practices; and disciplinary core ideas in the physical sciences, life sciences, and earth and space sciences and for engineering, technology, and the applications of science. The overarching goal is for all high school graduates to have sufficient knowledge of science and engineering to engage in public discussions on science-related issues, be careful consumers of scientific and technical information, and enter the careers of their choice. A Framework for K-12 Science Education is the first step in a process that can inform state-level decisions and achieve a research-grounded basis for improving science instruction and learning across the country. The book will guide standards developers, teachers, curriculum designers, assessment developers, state and district science administrators, and educators who teach science in informal environments.
Download or read book Catalyst Engineering Technology written by Jean W. L. Beeckman and published by John Wiley & Sons. This book was released on 2020-07-16 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive explanation of what governs the breakage of extruded materials, and what techniques are used to measure it. The breakage during impact aka collision is explained using basic laws of nature allowing readers to determine the handling severity of catalyst manufacturing equipment and the severity of entire plants. This information can then be used to improve on the architecture of existing plants and how to design grass-roots plants. The book begins with a summary of particle forming techniques in the particle technology industry. It covers extrusion technology in more detail since extrusion is one of the workhorses for particle manufacture. A section is also dedicated on how to describe transport and chemical reaction in such particulates for of course their final use. It presents the fundamentals of the study of breakage by relating basic laws in different fields (mechanics and physics) and this leads to two novel dimensionless groups that govern breakage. These topics are then apply these topics to R&D scale-up and manufacturing and shows how this approach is directly applicable.
Download or read book Engineering Technology and Industrial Chemistry with Applications written by Reza K. Haghi and published by CRC Press. This book was released on 2018-09-24 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, Engineering Technology and Industrial Chemistry with Applications, brings together innovative research, new concepts, and novel developments in the application of new tools for chemical and materials engineers. It provides a collection of innovative chapters on new scientific and industrial research from chemists and chemical engineers at several prestigious institutions. It looks at recent significant research and reports on new methodologies and important applications in the fields of chemical engineering as well as provides coverage of chemical databases, bringing together theory and practical applications. Highlighting theoretical foundations, real-world cases, and future directions, this authoritative reference source will be a valuable addition for researchers, practitioners, professionals, and students of chemistry material and chemical engineering.
Download or read book Protein Engineering written by Tomohisa Ogawa and published by BoD – Books on Demand. This book was released on 2013-05-29 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the centrality of protein to many biological process, this book makes a significant contribution to the fields of healthcare and nutrition. Its chapters consider topics such as protein-protein and protein-ligand docking, and the protein engineering of enzymes involved in bioplastic metabolism. One contribution gives an overview of the In Vitro Virus (IVV) analytic method, while another shows how cutting-edge techniques in protein engineering advance our knowledge in the field of palaeontology. The book also includes a review of classic and alternative strategies when using yeasts in research, with a focus on Pichia pastoris as a host. Finally, there are two contributions on chromatography: one on the method itself, and another on its use to identify HMGB1-binding components.
Download or read book Transactions on Engineering Technologies written by Sio-Iong Ao and published by Springer. This book was released on 2018-02-09 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a selection of revised and extended research articles written by prominent researchers participating in the 25th International MultiConference of Engineers and Computer Scientists (IMECS 2017) which was held in Hong Kong, 15-17 March, 2017. Topics covered include electrical engineering, communications systems, engineering mathematics, engineering physics, and industrial applications. With contributions carefully chosen to represent the most cutting-edge research presented during the conference, the book offers the state of art in engineering technologies and physical science and applications, and also serves as an excellent reference work for researchers and graduate students working with/on engineering technologies and physical science and applications.
Download or read book Information Technology and Computer Application Engineering written by Hsiang-Chuan Liu and published by CRC Press. This book was released on 2013-10-11 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume brings together some 189 peer-reviewed papers presented at the International Conference on Information Technology and Computer Application Engineering, held 27-28 August 2013, in Hong Kong, China. Specific topics under consideration include Control, Robotics, and Automation, Information Technology, Intelligent Computing and Telecommunication, Computer Science and Engineering, Computer Education and Application and other related topics. This book provides readers a state-of-the-art survey of recent innovations and research worldwide in Information Technology and Computer Application Engineering, in so-doing furthering the development and growth of these research fields, strengthening international academic cooperation and communication, and promoting the fruitful exchange of research ideas. This volume will be of interest to professionals and academics alike, serving as a broad overview of the latest advances in the dynamic field of Information Technology and Computer Application Engineering.
Download or read book Engineering Technology Education in the United States written by National Academy of Engineering and published by National Academies Press. This book was released on 2017-01-27 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vitality of the innovation economy in the United States depends on the availability of a highly educated technical workforce. A key component of this workforce consists of engineers, engineering technicians, and engineering technologists. However, unlike the much better-known field of engineering, engineering technology (ET) is unfamiliar to most Americans and goes unmentioned in most policy discussions about the US technical workforce. Engineering Technology Education in the United States seeks to shed light on the status, role, and needs of ET education in the United States.
Download or read book Engineering Technology and Applications written by Fun Shao and published by CRC Press. This book was released on 2014-08-19 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Technology and Applications contains the contributions presented at the 2014 International Conference on Engineering Technology and Applications (ICETA 2014, Tsingtao, China, 29-30 April 2014). The book is divided into three main topics: – Civil and environmental engineering – Electrical and computer engineering – Mechanical engineering Considerable attention is also paid to big data, cloud computing, neural network algorithms and social network services. The book will be invaluable to professionals and academics in civil, environmental, electrical, computer and mechanical engineering.
Download or read book Image Analysis written by Leszek Wojnar and published by CRC Press. This book was released on 2019-08-21 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Minimizing theoretical background and mathematical formalism, Image Analysis sets forth the basic principles of image acquisition, enhancement, measurements, and interpretation in a very simple form, focused on applications and the properties of available tools. The author lists different tasks and offers complete solutions to these tasks based on his extensive experience with the procedures described. The book provides a multitude of illustrations, drawings, and bitmaps and serves as an outstanding resource for specialists using image analysis equipment, including technicians and students.
Download or read book Probability with Applications in Engineering Science and Technology written by Matthew A. Carlton and published by Springer. This book was released on 2017-03-30 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated and revised first-course textbook in applied probability provides a contemporary and lively post-calculus introduction to the subject of probability. The exposition reflects a desirable balance between fundamental theory and many applications involving a broad range of real problem scenarios. It is intended to appeal to a wide audience, including mathematics and statistics majors, prospective engineers and scientists, and those business and social science majors interested in the quantitative aspects of their disciplines. The textbook contains enough material for a year-long course, though many instructors will use it for a single term (one semester or one quarter). As such, three course syllabi with expanded course outlines are now available for download on the book’s page on the Springer website. A one-term course would cover material in the core chapters (1-4), supplemented by selections from one or more of the remaining chapters on statistical inference (Ch. 5), Markov chains (Ch. 6), stochastic processes (Ch. 7), and signal processing (Ch. 8—available exclusively online and specifically designed for electrical and computer engineers, making the book suitable for a one-term class on random signals and noise). For a year-long course, core chapters (1-4) are accessible to those who have taken a year of univariate differential and integral calculus; matrix algebra, multivariate calculus, and engineering mathematics are needed for the latter, more advanced chapters. At the heart of the textbook’s pedagogy are 1,100 applied exercises, ranging from straightforward to reasonably challenging, roughly 700 exercises in the first four “core” chapters alone—a self-contained textbook of problems introducing basic theoretical knowledge necessary for solving problems and illustrating how to solve the problems at hand – in R and MATLAB, including code so that students can create simulations. New to this edition • Updated and re-worked Recommended Coverage for instructors, detailing which courses should use the textbook and how to utilize different sections for various objectives and time constraints • Extended and revised instructions and solutions to problem sets • Overhaul of Section 7.7 on continuous-time Markov chains • Supplementary materials include three sample syllabi and updated solutions manuals for both instructors and students
Download or read book History of Engineering and Technology written by Ervan G. Garrison and published by Routledge. This book was released on 2018-12-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: A History of Engineering and Technology offers a highly readable account of the development of engineering and technology from prehistory to the present. The author uses the broad sweep of history as a backdrop for expositions of important benchmarks in engineered works and products. The book presents early hydraulic engineering in the context of modern ideas relating technology to the complex social structures that arose in Sumeria and Egypt. It also provides a comprehensive and objective review of the greatest engineering civilization of antiquity-Greco-Roman-and discusses the western world's attempts to recover its achievements after the Middle Ages. The flowering of French and British engineered technology is portrayed through the men and machines that led to today's industrial society. Other topics discussed in A History of Engineering and Technology include the evolution of the modern ship, engineering in modern war and medicine, the advent of the computer, and the Space Age. Over 100 illustrations and the book's in-depth presentation of key theoretical developments make this volume essential as a college textbook for students, as well as an important reference resource for libraries, engineers, and scientists.
Download or read book Innovation and Application of Engineering Technology written by Avon Pekano Oscar and published by CRC Press. This book was released on 2017-07-31 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation and Application of Engineering Technology contains the proceeding of International Symposium of Engineering Technology and Application Convocation (ISETA 2017, 25-28 May 2017, Montreal, Canada). The Symposium provided an international forum for discussion and communication of engineering technology and application of Civil and Environmental Engineering, Mining Engineering, Risk and Occupational Engineering and other fields related to engineering. Sponsored by Concordia University, International Joint Research Laboratory of Henan Province for Underground Space Development, Henan Polytechnic University and IJSS, Innovation and Application of Engineering Technology will be useful for researchers, engineers and graduate and Ph.D. students in related Engineering fields.
Download or read book Software Engineering for Modern Web Applications Methodologies and Technologies written by Brandon, Daniel M. and published by IGI Global. This book was released on 2008-06-30 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book presents current, effective software engineering methods for the design and development of modern Web-based applications"--Provided by publisher.
Download or read book Packaging Technology and Engineering written by Dipak Kumar Sarkar and published by John Wiley & Sons. This book was released on 2020-09-08 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers chemistry, physics, engineering, and therapeutic aspects of packaging—universal to pharmaceutical, medical, and food applications This book covers the chemistry, physics, materials science, engineering, and therapeutic aspects of many different types of packaging materials, emphasizing throughout the applicability of various aspects of packaging science and technology. It also provides a simultaneous discussion of interrelated fields, and addresses the universal issues within these fields’ application areas. Intended as a technical reference and as a study aid, it is relevant to anyone who studies or uses packaging or packaging materials. Packaging Technology and Engineering: Pharmaceutical, Medical and Food Applications begins with an overview of the history of the topic. It then offers chapters on the methods of obtaining raw materials, the chemistry of polymeric and non-polymeric packaging materials, physico-chemical quality parameters, and the manufacturing of packaging. Other topics look at: additives, use, suppliers, safety and environmental concerns, regulation, anti-fraud activities, new trends, and the future of packaging technology. The book also features numerous problems and worked solutions to aid student comprehension. Covers packaging and packaging materials, their properties and technologies Addresses the chemical engineering, physics, and chemistry of packaging materials, and the individual requirements for food, pharmaceutical, and medical device packaging Includes current issues such as environmental concerns and sustainability, recycling and after-use, anti-counterfeiting technology, and packaging regulations and guidelines Packaging Technology and Engineering: Pharmaceutical, Medical and Food Applications will appeal to all packaging technologists, scientists, and engineers in industry, and in regulatory agencies. It is also an excellent book for advanced students studying packaging courses, within pharmacy, pharmaceutical sciences, chemical sciences, biomedical sciences, medical sciences, engineering, product design and technology, and food science/technology.
Download or read book Advanced Computer and Communication Engineering Technology written by Hamzah Asyrani Sulaiman and published by Springer. This book was released on 2014-11-01 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers diverse aspects of advanced computer and communication engineering, focusing specifically on industrial and manufacturing theory and applications of electronics, communications, computing and information technology. Experts in research, industry, and academia present the latest developments in technology, describe applications involving cutting-edge communication and computer systems and explore likely future directions. In addition, access is offered to numerous new algorithms that assist in solving computer and communication engineering problems. The book is based on presentations delivered at ICOCOE 2014, the 1st International Conference on Communication and Computer Engineering. It will appeal to a wide range of professionals in the field, including telecommunication engineers, computer engineers and scientists, researchers, academics and students.
