Download or read book Engineering Metrology and Measurements written by Raghavendra, and published by OUP India. This book was released on 2013-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Metrology and Measurements is a textbook designed for students of mechanical, production and allied disciplines to facilitate learning of various shop-floor measurement techniques and also understand the basics of mechanical measurements.
Download or read book Engineering Metrology and Measurements written by N. V. Raghavendra and published by . This book was released on 2013 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Metrology and Measurements is a textbook designed for students of mechanical, production and allied disciplines to facilitate learning of various shop-floor measurement techniques and also understand the basics of mechanical measurements.With a conventional introduction to the principles and standards of measurement, the book in subsequent chapters takes the reader through the important topics of metrology such as limits, fits and tolerances, linear measurements, angular measurements, comparators, optical measurements. The last fewchapters discuss the measurement concepts of simple physical parameters such as force, torque, strain, temperature, and pressure, before introducing the contemporary information on nanometrology as the last chapter.Adopting an illustrative approach to explain the concepts, the book presents solved numerical problems, practice problems, review questions, and multiple choice questions.
Download or read book Metrology Quality Control written by Anup Goel and published by Technical Publications. This book was released on 2020-12-01 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metrology is the scientific study of measurement. It establishes a common understanding of units, crucial in linking human activities. The knowledge of this subject is essential for all persons irrespective of the branch of engineering. For engineering purposes, the study is restricted to the measurement of lengths, angles and the quantities which are expressed in linear and angular terms. This book gives information about various instruments used for linear as well as angular measurements and corresponding errors. This book also includes concepts of quality, quality control, different tools and techniques for quality control, total quality management and various latest methods of quality control. Our hope is that this book, through its careful explanations of concepts, examples and figures bridges the gap between knowledge and proper application of that knowledge.
Download or read book Coordinate Metrology written by Jerzy A. Sładek and published by Springer. This book was released on 2015-12-22 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on effective methods for assessing the accuracy of both coordinate measuring systems and coordinate measurements. It mainly reports on original research work conducted by Sladek’s team at Cracow University of Technology’s Laboratory of Coordinate Metrology. The book describes the implementation of different methods, including artificial neural networks, the Matrix Method, the Monte Carlo method and the virtual CMM (Coordinate Measuring Machine), and demonstrates how these methods can be effectively used in practice to gauge the accuracy of coordinate measurements. Moreover, the book includes an introduction to the theory of measurement uncertainty and to key techniques for assessing measurement accuracy. All methods and tools are presented in detail, using suitable mathematical formulations and illustrated with numerous examples. The book fills an important gap in the literature, providing readers with an advanced text on a topic that has been rapidly developing in recent years. The book is intended for master and PhD students, as well as for metrology engineers working at industrial and research laboratories. It not only provides them with a solid background for using existing coordinate metrology methods; it is also meant to inspire them to develop the state-of-the-art technologies that will play an important role in supporting quality growth and innovation in advanced manufacturing.
Download or read book Handbook of Measurement in Science and Engineering Volume 3 written by Myer Kutz and published by John Wiley & Sons. This book was released on 2016-04-25 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: A multidisciplinary reference of engineering measurement tools, techniques, and applications "When you can measure what you are speaking about, and express it in numbers, you know something about it; but when you cannot measure it, when you cannot express it in numbers, your knowledge is of a meager and unsatisfactory kind; it may be the beginning of knowledge, but you have scarcely in your thoughts advanced to the stage of science." — Lord Kelvin Measurement is at the heart of any engineering and scientific discipline and job function. Whether engineers and scientists are attempting to state requirements quantitatively and demonstrate compliance; to track progress and predict results; or to analyze costs and benefits, they must use the right tools and techniques to produce meaningful data. The Handbook of Measurement in Science and Engineering is the most comprehensive, up-to-date reference set on engineering and scientific measurements—beyond anything on the market today. Encyclopedic in scope, Volume 3 covers measurements in physics, electrical engineering and chemistry: Laser Measurement Techniques Magnetic Force Images using Capacitive Coupling Effect Scanning Tunneling Microscopy Measurement of Light and Color The Detection and Measurement of Ionizing Radiation Measuring Time and Comparing Clocks Laboratory-Based Gravity Measurement Cryogenic Measurements Temperature-Dependent Fluorescence Measurements Voltage and Current Transducers for Power Systems Electric Power and Energy Measurement Chemometrics for the Engineering and Measurement Sciences Liquid Chromatography Mass Spectroscopy Measurements of Nitrotyrosine-Containing Proteins Fluorescence Spectroscopy X-Ray Absorption Spectroscopy Nuclear Magnetic Resonance (NMR) Spectroscopy Near Infrared (NIR) Spectroscopy Nanomaterials Properties Chemical Sensing Vital for engineers, scientists, and technical managers in industry and government, Handbook of Measurement in Science and Engineering will also prove ideal for academics and researchers at universities and laboratories.
Download or read book Engineering Metrology Instrumentation written by R.K. Rajput and published by . This book was released on 2009-01-01 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Metrology and Measurement of Engineering Surfaces written by Chander Prakash and published by Springer Nature. This book was released on 2020-06-15 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the International Conference on Functional Material, Manufacturing and Performances (ICFMMP) 2019. The book covers broad aspects of several topics involved in the metrology and measurement of engineering surfaces and their implementation in automotive, bio-manufacturing, chemicals, electronics, energy, construction materials, and other engineering applications. The contents focus on cutting-edge instruments, methods and standards in the field of metrology and mechanical properties of advanced materials. Given the scope of the topics, this book can be useful for students, researchers and professionals interested in the measurement of surfaces, and the applications thereof.
Download or read book Applied Metrology for Manufacturing Engineering written by Ammar Grous and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Metrology for Manufacturing Engineering, stands out from traditional works due to its educational aspect. Illustrated by tutorials and laboratory models, it is accessible to users of non-specialists in the fields of design and manufacturing. Chapters can be viewed independently of each other. This book focuses on technical geometric and dimensional tolerances as well as mechanical testing and quality control. It also provides references and solved examples to help professionals and teachers to adapt their models to specific cases. It reflects recent developments in ISO and GPS standards and focuses on training that goes hand in hand with the progress of practical work and workshops dealing with measurement and dimensioning.
Download or read book Surfaces and their Measurement written by David J. Whitehouse and published by Elsevier. This book was released on 2004-07-01 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of surface metrology has long been acknowledged in manufacturing and mechanical engineering, but has now gained growing recognition in an expanding number of new applications in fields such as semiconductors, electronics and optics. Metrology is the scientific study of measurement, and surface metrology is the study of the measurement of rough surfaces. In this book, Professor David Whitehouse, an internationally acknowledged subject expert, covers the wide range of theory and practice, including the use of new methods of instrumentation. · Written by one of the world's leading metrologists · Covers electronics and optics applications as well as mechanical · Written for mechanical and manufacturing engineers, tribologists and precision engineers in industry and academia
Download or read book Springer Handbook of Metrology and Testing written by Horst Czichos and published by Springer Science & Business Media. This book was released on 2011-07-22 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Springer Handbook of Metrology and Testing presents the principles of Metrology – the science of measurement – and the methods and techniques of Testing – determining the characteristics of a given product – as they apply to chemical and microstructural analysis, and to the measurement and testing of materials properties and performance, including modelling and simulation. The principal motivation for this Handbook stems from the increasing demands of technology for measurement results that can be used globally. Measurements within a local laboratory or manufacturing facility must be able to be reproduced accurately anywhere in the world. The book integrates knowledge from basic sciences and engineering disciplines, compiled by experts from internationally known metrology and testing institutions, and academe, as well as from industry, and conformity-assessment and accreditation bodies. The Commission of the European Union has expressed this as there is no science without measurements, no quality without testing, and no global markets without standards.
Download or read book Mechanical Measurements written by S.P. Venkateshan and published by Springer Nature. This book was released on 2021-07-01 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: p="" This book focuses both on the basics and more complex topics in mechanical measurements such as measurement errors & statistical analysis of data, regression analysis, heat flux, measurement of pressure, and radiation properties of surfaces. End of chapter problems, solved illustrations, and exercise problems are presented throughout the book to augment learning. It is a useful reference for students in both undergraduate and postgraduate programs. ^
Download or read book Fundamental Principles of Engineering Nanometrology written by Richard Leach and published by William Andrew. This book was released on 2009-09-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental Principles of Engineering Nanometrology provides a comprehensive overview of engineering metrology and how it relates to micro and nanotechnology (MNT) research and manufacturing. By combining established knowledge with the latest advances from the field, it presents a comprehensive single volume that can be used for professional reference and academic study. Provides a basic introduction to measurement and instruments Thoroughly presents numerous measurement techniques, from static length and displacement to surface topography, mass and force Covers multiple optical surface measuring instruments and related topics (interferometry, triangulation, confocal , variable focus, and scattering instruments) Explains, in depth, the calibration of surface topography measuring instruments (traceability; calibration of profile and areal surface texture measuring instruments; uncertainties) Discusses the material in a way that is comprehensible to even those with only a limited mathematical knowledge
Download or read book Measurement Science for Engineers written by Paul Regtien and published by Elsevier. This book was released on 2004-06-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, from an international authority on the subject, deals with the physical and instrumentation aspects of measurement science, the availability of major measurement tools, and how to use them. This book not only lays out basic concepts of electronic measurement systems, but also provides numerous examples and exercises for the student. · Ideal for courses on instrumentation, control engineering and physics · Numerous worked examples and student exercises
Download or read book Instrumentation and Measurement in Electrical Engineering written by Roman Malaric and published by Universal-Publishers. This book was released on 2011 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: The inclusion of an electrical measurement course in the undergraduate curriculum of electrical engineering is important in forming the technical and scientific knowledge of future electrical engineers. This book explains the basic measurement techniques, instruments, and methods used in everyday practice. It covers in detail both analogue and digital instruments, measurements errors and uncertainty, instrument transformers, bridges, amplifiers, oscilloscopes, data acquisition, sensors, instrument controls and measurement systems. The reader will learn how to apply the most appropriate measurement method and instrument for a particular application, and how to assemble the measurement system from physical quantity to the digital data in a computer. The book is primarily intended to cover all necessary topics of instrumentation and measurement for students of electrical engineering, but can also serve as a reference for engineers and practitioners to expand or refresh their knowledge in this field.
Download or read book Data Modeling for Metrology and Testing in Measurement Science written by Franco Pavese and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provide a comprehensive set of modeling methods for data and uncertainty analysis, taking readers beyond mainstream methods and focusing on techniques with a broad range of real-world applications. The book will be useful as a textbook for graduate students, or as a training manual in the fields of calibration and testing. The work may also serve as a reference for metrologists, mathematicians, statisticians, software engineers, chemists, and other practitioners with a general interest in measurement science.
Download or read book Quantum Metrology written by Ernst O. Göbel and published by John Wiley & Sons. This book was released on 2015-09-21 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International System of Units (SI) is the world's most widely used system of measurement, used every day in commerce and science, and is the modern form of the metric system. It currently comprises the meter (m), the kilogram (kg), the second (s), the ampere (A), the kelvin (K), the candela (cd) and the mole (mol)). The system is changing though, units and unit definitions are modified through international agreements as the technology of measurement progresses, and as the precision of measurements improves. The SI is now being redefined based on constants of nature and their realization by quantum standards. Therefore, the underlying physics and technologies will receive increasing interest, and not only in the metrology community but in all fields of science. This book introduces and explains the applications of modern physics concepts to metrology, the science and the applications of measurements. A special focus is made on the use of quantum standards for the realization of the forthcoming new SI (the international system of units). The basic physical phenomena are introduced on a level which provides comprehensive information for the experienced reader but also provides a guide for a more intense study of these phenomena for students.
Download or read book Handbook of Optical Dimensional Metrology written by Kevin Harding and published by Taylor & Francis. This book was released on 2016-04-19 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their speed, data density, and versatility, optical metrology tools play important roles in today's high-speed industrial manufacturing applications. Handbook of Optical Dimensional Metrology provides useful background information and practical examples to help readers understand and effectively use state-of-the-art optical metrology methods
