Download or read book Engineering Mechanics 2015 written by Cyril Fischer and published by Trans Tech Publications Ltd. This book was released on 2016-01-11 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present Special Issue contains a selection of papers presented at the 22nd International Conference on Engineering Mechanics, which has been held in Svratka resort in Czech Republic under auspices of the Czech Society of Mechanics and being a part of IFTOMM (The International Federation for the Promotion of Mechanism and Machine Science) activities. As it corresponds with character of the conference, this Special Issue consists of several topic oriented parts: Linear and Nonlinear Dynamics and Stability, Aeroelasticity, Hydroelasticity and Fluid Mechanics, Biomechanics, Fracture Mechanics, Mechatronics, Reliability of Structures, Mechanics of Solids, Thermomechanics. The volume represents a well-balanced overview of theoretical, numerical and experimental work on fundamental and applied studies.

Download or read book Applied Mechanics Mechatronics and Intelligent Systems written by Shihong Qin and published by World Scientific. This book was released on 2015-12-08 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of one hundred and twenty-five selected papers presented at the 2015 International Conference on Applied Mechanics, Mechatronics and Intelligent Systems (AMMIS2015), which was held in Nanjing, China during June 19–20, 2015. AMMIS2015 focuses on seven main areas, namely, applied mechanics, control and automation, intelligent systems, computer technology, electronics engineering, electrical engineering, and materials science and technology. Experts in this field from all over the world contributed to the collection of research results and development activities. AMMIS2015 provides an excellent international exchange platform for researchers to share their development works and results in these areas. All papers selected for this proceeding were subjected to a rigorous peer-review process. Contents: Applied and Computational MechanicsResearch and Design in Mechanical EngineeringTechnology and Method for Measurement, Test, Detection and MonitoringIntelligent Systems, Processing of Signal and DataControl and AutomationApplied Information TechnologyMaterial Science and Material Processing TechnologyComputational TechnologyElectronics and Electrical EngineeringSystem Science and Engineering Readership: Researchers and professionals interested in applied mechanics, mechatronics and intelligent systems. Key Features:This is a conference that focuses on the latest research effort funded by the Chinese government in applied mechanics and mechatronics in the development of intelligent systems. The readers are mainly participants and contributors to the conference who will be given e-access to the proceedingsKeywords:Applied Mechanics;Control and Automation;Intelligent Systems;Computer Technology;Electronics Engineering;Electrical Engineering;Materials Science and Technology

Download or read book Mechanics and Mechanical Engineering written by Maosen Cao and published by World Scientific. This book was released on 2016-07-14 with total page 1400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings consists of 162 selected papers presented at the 2nd Annual International Conference on Mechanics and Mechanical Engineering (MME2015), which was successfully held in Chengdu, China between December 25–27, 2015. MME2015 is one of the key international conferences in the fields of mechanics, mechanical engineering. It offers a great opportunity to bring together researchers and scholars around the globe to deliver the latest innovative research and the most recent developments in the field of Mechanics and Mechanical Engineering. MME2015 received over 400 submissions from about 600 laboratories, colleges and famous institutes. All the submissions have undergone double blind reviewed to assure the quality, reliability and validity of the results presented. These papers are arranged into 6 main chapters according to their research fields. These are: 1) Applied Mechanics 2) Mechanical Engineering and Manufacturing Technology 3) Material Science and Material Engineering 4) Automation and Control Engineering 5) Electrical Engineering 6) System Modelling and Simulation. This proceedings will be invaluable to academics and professionals interested in Mechanics and Mechanical Engineering. Contents:Applied MechanicsMechanical Engineering and Manufacturing TechnologyMaterial Science and Material EngineeringAutomation and Control EngineeringElectrical EngineeringSystem Modeling and Simulation Readership: Researchers and academic.

Download or read book Insights and Innovations in Structural Engineering Mechanics and Computation written by Alphose Zingoni and published by CRC Press. This book was released on 2016-11-25 with total page 2223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Insights and Innovations in Structural Engineering, Mechanics and Computation comprises 360 papers that were presented at the Sixth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2016, Cape Town, South Africa, 5-7 September 2016). The papers reflect the broad scope of the SEMC conferences, and cover a wide range of engineering structures (buildings, bridges, towers, roofs, foundations, offshore structures, tunnels, dams, vessels, vehicles and machinery) and engineering materials (steel, aluminium, concrete, masonry, timber, glass, polymers, composites, laminates, smart materials).

Download or read book Engineering Statics Labs with SOLIDWORKS Motion 2015 written by Huei-Huang Lee and published by SDC Publications. This book was released on 2015 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as a software-based lab book to complement a standard textbook in an engineering statics course, which is usually taught at the undergraduate level. This book can also be used as an auxiliary workbook in a CAE or Finite Element Analysis course for undergraduate students. Each book comes with a disc containing video demonstrations, a quick introduction to SOLIDWORKS, and all the part files used in the book. This textbook has been carefully developed with the understanding that CAE software has developed to a point that it can be used as a tool to aid students in learning engineering ideas, concepts and even formulas. These concepts are demonstrated in each section of this book. Using the graphics-based tools of SOLIDWORKS Motion can help reduce the dependency on mathematics to teach these concepts substantially. The contents of this book have been written to match the contents of most statics textbooks. There are 8 chapters in this book. Each chapter is designed as one week’s workload, consisting of 2 to 3 sections. Each section is designed for a student to follow the exact steps in that section and learn a concept or topic of statics. Typically, each section takes 15-40 minutes to complete the exercises. Each copy of this book comes with a disc containing videos that demonstrate the steps used in each section of the book, a 123 page introduction to Part and Assembly Modeling with SOLIDWORKS in PDF format, and all the files readers may need if they have any trouble. The concise introduction to SOLIDWORKS PDF is designed for those students who have no experience with SOLIDWORKS and want to feel more comfortable working on the exercises in this book. All of the same content is available for download on the book’s companion website.

Download or read book Introduction to Engineering Mechanics written by Jenn Stroud Rossmann and published by CRC Press. This book was released on 2015-03-24 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Mechanics Knowledge Essential for Any EngineerIntroduction to Engineering Mechanics: A Continuum Approach, Second Edition uses continuum mechanics to showcase the connections between engineering structure and design and between solids and fluids and helps readers learn how to predict the effects of forces, stresses, and strains. T

Download or read book Mechanics of Materials Labs with SOLIDWORKS Simulation 2015 written by Huei-Huang Lee and published by SDC Publications. This book was released on 2015-03 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as a software-based lab book to complement a standard textbook in a mechanics of material course, which is usually taught at the undergraduate level. This book can also be used as an auxiliary workbook in a CAE or Finite Element Analysis course for undergraduate students. Each book comes with a disc containing video demonstrations, a quick introduction to SOLIDWORKS, and all the part files used in the book. This textbook has been carefully developed with the understanding that CAE software has developed to a point that it can be used as a tool to aid students in learning engineering ideas, concepts and even formulas. These concepts are demonstrated in each section of this book. Using the graphics-based tools of SOLIDWORKS Simulation can help reduce the dependency on mathematics to teach these concepts substantially. The contents of this book have been written to match the contents of most mechanics of materials textbooks. There are 14 chapters in this book. Each chapter is designed as one week’s workload, consisting of 2 to 3 sections. Each section is designed for a student to follow the exact steps in that section and learn a concept or topic of mechanics of materials. Typically, each section takes 15-40 minutes to complete the exercises. Each copy of this book comes with a disc containing videos that demonstrate the steps used in each section of the book, a 123 page introduction to Part and Assembly Modeling with SOLIDWORKS in PDF format, and all the files readers may need if they have any trouble. The concise introduction to SOLIDWORKS pdf is designed for those students who have no experience with SOLIDWORKS and want to feel more comfortable working on the exercises in this book. All of the same content is available for download on the book’s companion website.

Download or read book Engineering Dynamics Labs with SOLIDWORKS Motion 2015 written by Huei-Huang Lee and published by SDC Publications. This book was released on 2015-04 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as a software-based lab book to complement a standard textbook in an engineering dynamics course, which is usually taught at the undergraduate level. This book can also be used as an auxiliary workbook in a CAE or Finite Element Analysis course for undergraduate students. Each book comes with a disc containing video demonstrations, a quick introduction to SOLIDWORKS eBook, and all the part files used in the book. This textbook has been carefully developed with the understanding that CAE software has developed to a point that it can be used as a tool to aid students in learning engineering ideas, concepts and even formulas. These concepts are demonstrated in each section of this book. Using the graphics-based tools of SOLIDWORKS Motion can help reduce the dependency on mathematics to teach these concepts substantially. The contents of this book have been written to match the contents of most mechanics of materials textbooks. There are 11 chapters in this book. Each chapter contains two sections. Each section is designed for a student to follow the exact steps in that section and learn a concept or topic of Engineering Dynamics. Typically, each section takes 20-40 minutes to complete the exercises. Each copy of this book comes with a disc containing videos that demonstrate the steps used in each section of the book, a 123 page introduction to Part and Assembly Modeling with SOLIDWORKS in PDF format, and all the files readers may need if they have any trouble. The concise introduction to SOLIDWORKS PDF is designed for those students who have no experience with SOLIDWORKS and want to feel more comfortable working on the exercises in this book. All of the same content is available for download on the book’s companion website.

Download or read book Mechanics and Mechatronics icmm2015 Proceedings of the 2015 International Conference written by A. Mehran Shahhosseini and published by World Scientific. This book was released on 2015-11-02 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings brings together one hundred and fifty two selected papers presented at the 2015 International Conference on Mechanics and Mechatronics (ICMM 2015), which was held in Changsha, Hunan, China, during March 13-15 2015.ICMM 2015 focuses on 7 main areas -- Applied Mechanics, Mechanical Engineering, Instrumentation, Automation, and Robotics, Computer Information Processing, and Civil Engineering. Experts in this field from eight countries, including China, South Korea, Taiwan, Japan, Malaysia, Hong Kong, Indonesia and Saudi Arabia, contributed to the collection of research results and developments.ICMM 2015 provides an excellent international platform for researchers to share their knowledge and results in theory, methodology and applications of Applied Mechanics and Mechatronics. All papers selected to this proceedings were subject to a rigorous peer-review process by at least two independent peers. The papers are selected based on innovation, organization, and quality of presentation.

Download or read book Introduction to Engineering Mechanics written by Clive L. Dym and published by CRC Press. This book was released on 2008-11-10 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essence of continuum mechanics- the internal response of materials to external loading- is often obscured by the complex mathematics of its formulation. By building gradually from one-dimensional to two- and three-dimensional formulations, this book provides an accessible introduction to the fundamentals of solid and fluid mechanics, covering s

Download or read book Life Cycle Analysis and Assessment in Civil Engineering Towards an Integrated Vision written by Robby Caspeele and published by CRC Press. This book was released on 2018-10-31 with total page 3160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at IALCCE2018, the Sixth International Symposium on Life-Cycle Civil Engineering (IALCCE2018), held in Ghent, Belgium, October 28-31, 2018. It consists of a book of extended abstracts and a USB device with full papers including the Fazlur R. Khan lecture, 8 keynote lectures, and 390 technical papers from all over the world. Contributions relate to design, inspection, assessment, maintenance or optimization in the framework of life-cycle analysis of civil engineering structures and infrastructure systems. Life-cycle aspects that are developed and discussed range from structural safety and durability to sustainability, serviceability, robustness and resilience. Applications relate to buildings, bridges and viaducts, highways and runways, tunnels and underground structures, off-shore and marine structures, dams and hydraulic structures, prefabricated design, infrastructure systems, etc. During the IALCCE2018 conference a particular focus is put on the cross-fertilization between different sub-areas of expertise and the development of an overall vision for life-cycle analysis in civil engineering. The aim of the editors is to provide a valuable source of cutting edge information for anyone interested in life-cycle analysis and assessment in civil engineering, including researchers, practising engineers, consultants, contractors, decision makers and representatives from local authorities.

Download or read book Frontiers in Computational Fluid Structure Interaction and Flow Simulation written by Tayfun E. Tezduyar and published by Springer. This book was released on 2018-10-26 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational fluid-structure interaction and flow simulation are challenging research areas that bring solution and analysis to many classes of problems in science, engineering, and technology. Young investigators under the age of 40 are conducting much of the frontier research in these areas, some of which is highlighted in this book. The first author of each chapter took the lead role in carrying out the research presented. The topics covered include Computational aerodynamic and FSI analysis of wind turbines, Simulating free-surface FSI and fatigue-damage in wind-turbine structural systems, Aorta flow analysis and heart valve flow and structure analysis, Interaction of multiphase fluids and solid structures, Computational analysis of tire aerodynamics with actual geometry and road contact, and A general-purpose NURBS mesh generation method for complex geometries. This book will be a valuable resource for early-career researchers and students — not only those interested in computational fluid-structure interaction and flow simulation, but also other fields of engineering and science, including fluid mechanics, solid mechanics and computational mathematics – as it will provide them with inspiration and guidance for conducting their own successful research. It will also be of interest to senior researchers looking to learn more about successful research led by those under 40 and possibly offer collaboration to these researchers.

Download or read book UHPCC Under Impact and Blast written by Qin Fang and published by Springer Nature. This book was released on 2021-02-22 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about the Ultra-high Performance Cementitious Composites (UHPCC), which is a relativity new type of cementitious materials. UHPCC has very low water-to-binder ratio, high amount of high-range water reducer, fine aggregates and high-strength steel or organic fibers. With the prominent mechanical properties, e.g., high compressive and tensile strength, high ductility, and high fracture energy, UHPCC has been becoming the most prospective construction cement-based material for both civil and military structures to resist high-speed projectile penetration, low-velocity impact and blast loadings. In this book, the related work conducted by authors on the static and dynamic mechanical properties, as well as the impact and blast resistance of UHPCC are presented. This book is written for the researchers, engineers and graduate students in the fields of protective structures and terminal ballistics.

Download or read book Engineering Mechanics 2 written by Dietmar Gross and published by Springer. This book was released on 2018-03-12 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its second English edition, Mechanics of Materials is the second volume of a three-volume textbook series on Engineering Mechanics. It was written with the intention of presenting to engineering students the basic concepts and principles of mechanics in as simple a form as the subject allows. A second objective of this book is to guide the students in their efforts to solve problems in mechanics in a systematic manner. The simple approach to the theory of mechanics allows for the different educational backgrounds of the students. Another aim of this book is to provide engineering students as well as practising engineers with a basis to help them bridge the gaps between undergraduate studies, advanced courses on mechanics and practical engineering problems. The book contains numerous examples and their solutions. Emphasis is placed upon student participation in solving the problems. The new edition is fully revised and supplemented by additional examples. The contents of the book correspond to the topics normally covered in courses on basic engineering mechanics at universities and colleges. Volume 1 deals with Statics and Volume 3 treats Particle Dynamics and Rigid Body Dynamics. Separate books with exercises and well elaborated solutions are available.

Download or read book Advances in Engineering Materials Structures and Systems Innovations Mechanics and Applications written by Alphose Zingoni and published by CRC Press. This book was released on 2019-08-21 with total page 2435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications comprises 411 papers that were presented at SEMC 2019, the Seventh International Conference on Structural Engineering, Mechanics and Computation, held in Cape Town, South Africa, from 2 to 4 September 2019. The subject matter reflects the broad scope of SEMC conferences, and covers a wide variety of engineering materials (both traditional and innovative) and many types of structures. The many topics featured in these Proceedings can be classified into six broad categories that deal with: (i) the mechanics of materials and fluids (elasticity, plasticity, flow through porous media, fluid dynamics, fracture, fatigue, damage, delamination, corrosion, bond, creep, shrinkage, etc); (ii) the mechanics of structures and systems (structural dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) the numerical modelling and experimental testing of materials and structures (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) innovations and special structures (nanostructures, adaptive structures, smart structures, composite structures, bio-inspired structures, shell structures, membranes, space structures, lightweight structures, long-span structures, tall buildings, wind turbines, etc); (v) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber, glass); (vi) the process of structural engineering (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, testing, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). The SEMC 2019 Proceedings will be of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find them useful. Two versions of the papers are available. Short versions, intended to be concise but self-contained summaries of the full papers, are in this printed book. The full versions of the papers are in the e-book.

Download or read book Advances in Structural Engineering written by Vasant Matsagar and published by Springer. This book was released on 2014-12-12 with total page 1033 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents research papers presented by academicians, researchers, and practicing structural engineers from India and abroad in the recently held Structural Engineering Convention (SEC) 2014 at Indian Institute of Technology Delhi during 22 – 24 December 2014. The book is divided into three volumes and encompasses multidisciplinary areas within structural engineering, such as earthquake engineering and structural dynamics, structural mechanics, finite element methods, structural vibration control, advanced cementitious and composite materials, bridge engineering, and soil-structure interaction. Advances in Structural Engineering is a useful reference material for structural engineering fraternity including undergraduate and postgraduate students, academicians, researchers and practicing engineers.

Download or read book Advanced Research on Shallow Foundations written by Hany Shehata and published by Springer. This book was released on 2018-10-27 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume deals with the advanced analysis of shallow foundations. Several research studies are considered including soil plasticity, cracking, reaching the soil bearing capacity, creep, etc. Dynamic analyses together with stability analysis are also discussed. It gives wide range of topics dealing with the shallow foundations in different parts of the world. The volume is based on the best contributions to the 2nd GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2018 – The official international congress of the Soil-Structure Interaction Group in Egypt (SSIGE).