Download or read book Engineering Materials and Processes e Mega Reference written by Michael F. Ashby and published by Butterworth-Heinemann. This book was released on 2009-01-06 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: A one-stop desk reference, for engineers involved in the use of engineered materials across engineering and electronics, this book will not gather dust on the shelf. It brings together the essential professional reference content from leading international contributors in the field. Material ranges from basic to advanced topics, including materials and process selection and explanations of properties of metals, ceramics, plastics and composites. A hard-working desk reference, providing all the essential material needed by engineers on a day-to-day basis Fundamentals, key techniques, engineering best practice and rules-of-thumb together in one quick-reference sourcebook Definitive content by the leading authors in the field, including Michael Ashby, Robert Messler, Rajiv Asthana and R.J. Crawford

Download or read book Materials Processing written by Lorraine F. Francis and published by Academic Press. This book was released on 2015-12-28 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Processing is the first textbook to bring the fundamental concepts of materials processing together in a unified approach that highlights the overlap in scientific and engineering principles. It teaches students the key principles involved in the processing of engineering materials, specifically metals, ceramics and polymers, from starting or raw materials through to the final functional forms. Its self-contained approach is based on the state of matter most central to the shaping of the material: melt, solid, powder, dispersion and solution, and vapor. With this approach, students learn processing fundamentals and appreciate the similarities and differences between the materials classes. The book uses a consistent nomenclature that allow for easier comparisons between various materials and processes. Emphasis is on fundamental principles that gives students a strong foundation for understanding processing and manufacturing methods. Development of connections between processing and structure builds on students’ existing knowledge of structure-property relationships. Examples of both standard and newer additive manufacturing methods throughout provide students with an overview of the methods that they will likely encounter in their careers. This book is intended primarily for upper-level undergraduates and beginning graduate students in Materials Science and Engineering who are already schooled in the structure and properties of metals, ceramics and polymers, and are ready to apply their knowledge to materials processing. It will also appeal to students from other engineering disciplines who have completed an introductory materials science and engineering course. Coverage of metal, ceramic and polymer processing in a single text provides a self-contained approach and consistent nomenclature that allow for easier comparisons between various materials and processes Emphasis on fundamental principles gives students a strong foundation for understanding processing and manufacturing methods Development of connections between processing and structure builds on students’ existing knowledge of structure - property relationships Examples of both standard and newer additive manufacturing methods throughout provide students with an overview of the methods that they will likely encounter in their careers

Download or read book Manufacturing Engineering Processes Second Edition written by Alting and published by CRC Press. This book was released on 1993-11-23 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Responding to the need for an integrated approach in manufacturing engineering oriented toward practical problem solving, this updated second edition describes a process morphology based on fundamental elements that can be applied to all manufacturing methods - providing a framework for classifying processes into major families with a common theoretical foundation. This work presents time-saving summaries of the various processing methods in data sheet form - permitting quick surveys for the production of specific components.;Delineating the actual level of computer applications in manufacturing, this work: creates the basis for synthesizing process development, tool and die design, and the design of production machinery; details the product life-cycle approach in manufacturing, emphasizing environmental, occupational health and resource impact consequences; introduces process planning and scheduling as an important part of industrial manufacturing; contains a completely revised and expanded section on ceramics and composites; furnishes new information on welding arc formation and maintenance; addresses the issue of industrial safety; and discusses progress in non-conventional processes such as laser processing, layer manufacturing, electrical discharge, electron beam, abrasive jet, ultrasonic and eltrochemical machining.;Revealing how manufacturing methods are adapted in industry practices, this work is intended for use by students of manufacturing engineering, industrial engineering and engineering design; and also for use as a self-study guide by manufacturing, mechanical, materials, industrial and design engineers.

Download or read book Materials and Manufacturing Processes written by Kaushik Kumar and published by Springer. This book was released on 2019-06-05 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the materials and traditional processes involved in the manufacturing industry. It discusses the properties and application of different engineering materials as well as the performance of failure tests. The book lists both destructible and non-destructible processes in detail. The design associated with each manufacturing processes, such Casting, Forming, Welding and Machining, are also covered.

Download or read book Laser Processing of Engineering Materials written by John Ion and published by Elsevier. This book was released on 2005-03-22 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complete guide to understanding and using lasers in material processing! Lasers are now an integral part of modern society, providing extraordinary opportunities for innovation in an ever-widening range of material processing and manufacturing applications. The study of laser material processing is a core element of many materials and manufacturing courses at undergraduate and postgraduate level. As a consequence, there is now a vast amount of research on the theory and application of lasers to be absorbed by students, industrial researchers, practising engineers and production managers. Written by an acknowledged expert in the field with over twenty years' experience in laser processing, John Ion distils cutting-edge information and research into a single key text. Essential for anyone studying or working with lasers, Laser Processing of Engineering Materials provides a clear explanation of the underlying principles, including physics, chemistry and materials science, along with a framework of available laser processes and their distinguishing features and variables. This book delivers the knowledge needed to understand and apply lasers to the processing of engineering materials, and is highly recommended as a valuable guide to this revolutionary manufacturing technology. The first single volume text that treats this core engineering subject in a systematic manner Covers the principles, practice and application of lasers in all contemporary industrial processes; packed with examples, materials data and analysis, and modelling techniques

Download or read book Introduction to Manufacturing Processes and Materials written by Robert Creese and published by CRC Press. This book was released on 2017-12-19 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first manufacturing book to examine time-based break-even analysis, this landmark reference/text applies cost analysis to a variety of industrial processes, employing a new, problem-based approach to manufacturing procedures, materials, and management. An Introduction to Manufacturing Processes and Materials integrates analysis of material costs and process costs, yielding a realistic, effective approach to planning and executing efficient manufacturing schemes. It discusses tool engineering, particularly in terms of cost for press work, forming dies, and casting patterns, process parameters such as gating and riser design for casting, feeds, and more.

Download or read book Manufacturing Process Design and Optimization written by Rhyder and published by CRC Press. This book was released on 1997-04-15 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents the concepts of process design, problem identification, problem-solving and process optimization. It provides the basic tools needed to increase the consistency and profitability of manufacturing options, stressing the paradigms of improvement and emphasizing the hands-on use of tools furnished. The book introduces basic experimental design principles and avoids complicated statistical formulae.

Download or read book Materials and Process Selection for Engineering Design written by Mahmoud M. Farag and published by CRC Press. This book was released on 2020-12-30 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing a new engineering product or changing an existing model involves developing designs, reaching economic decisions, selecting materials, choosing manufacturing processes, and assessing environmental impact. These activities are interdependent and should not be performed in isolation from each other. This is because the materials and processes used in making a product can have a major influence on its design, cost, and performance in service. This Fourth Edition of the best-selling Materials and Process Selection for Engineering Design takes all of this into account and has been comprehensively revised to reflect the many advances in the fields of materials and manufacturing, including: Increasing use of additive manufacturing technology, especially in biomedical, aerospace and automotive applications Emphasizing the environmental impact of engineering products, recycling, and increasing use of biodegradable polymers and composites Analyzing further into weight reduction of products through design changes as well as material and process selection, especially in manufacturing products such as electric cars Discussing new methods for solving multi-criteria decision-making problems, including multi-component material selection as well as concurrent and geometry-dependent selection of materials and joining technology Increasing use of MATLAB by engineering students in solving problems This textbook features the following pedagogical tools: New and updated practical case studies from industry A variety of suggested topics and background information for in-class group work Ideas and background information for reflection papers so readers can think critically about the material they have read, give their interpretation of the issues under discussion and the lessons learned, and then propose a way forward Open-book exercises and questions at the end of each chapter where readers are evaluated on how they use the material, rather than how well they recall it, in addition to the traditional review questions Includes a solutions manual and PowerPoint lecture materials for adopting professors Aimed at students in mechanical, manufacturing, and materials engineering, as well as professionals in these fields, this book provides the practical know-how in order to choose the right materials and processes for development of new or enhanced products.

Download or read book Materials Processing and Manufacturing Science written by Rajiv Asthana and published by Elsevier. This book was released on 2006-01-09 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Materials Science in Manufacturing focuses on materials science and materials processing primarily for engineering and technology students preparing for careers in manufacturing. The text also serves as a useful reference on materials science for the practitioner engaged in manufacturing as well as the beginning graduate student. Integrates theoretical understanding and current practices to provide a resource for students preparing for advanced study or career in industry. Also serves as a useful resource to the practitioner who works with diverse materials and processes, but is not a specialist in materials science. This book covers a wider range of materials and processes than is customary in the elementary materials science books. This book covers a wider range of materials and processes than is customary in the elementary materials science books. * Detailed explanations of theories, concepts, principles and practices of materials and processes of manufacturing through richly illustrated text * Includes new topics such as nanomaterials and nanomanufacturing, not covered in most similar works * Focuses on the interrelationship between Materials Science, Processing Science, and Manufacturing Technology

Download or read book Materials and Process Selection for Engineering Design written by Mahmoud M. Farag and published by CRC Press. This book was released on 2007-12-13 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Taking a practical approach, this work illustrates how design, materials, and process selection must mesh together and be considered along with economic and environmental analysis, when developing a new product or changing an existing model. It also considers the trade-offs that must sometimes be made. This second edition adds and revises topics such as environmental, function, and aesthetic considerations in design; environmental impact assessment of materials and processes; life cycle and recycling economics; and materials substitution. The book begins with an intro that reviews stages of product development. This is followed by three sections covering— · Mechanical failures, environmental degradation, and materials that resist different types of failure · Elements of engineering design and the effect of material properties and manufacturing processes on the design of components · Economic and environmental aspects of materials and manufacturing processes, as well as quantitative and computer-assisted methods for screening, ranking alternatives, and deciding on the optimum material/process combination Examples and detailed case studies illustrating practical applications, as well as materials selection and substitution from a variety of industries, are included. Each chapter begins with clear objectives and ends with a summary, review questions, and bibliography. Appendices supply tables of composition and properties and a glossary of technical terms. SI units are used; with Imperial units given when possible. This student-friendly text demonstrates how to balance design, materials, process selection, and economic and environmental analysis to optimize manufacturing processes for a given component. The author maintains a book website which features PowerPoint presentations for each chapter, and access to a solutions manual for qualifying instructors. Professor Faraq’s book website

Download or read book Modelling of Powder Die Compaction written by Peter R. Brewin and published by Springer Science & Business Media. This book was released on 2007-09-26 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacture of components from powders frequently requires a compaction step. Modelling of Powder Die Compaction presents a number of case studies that have been developed to test compaction models. It will be bought by researchers involved in developing models of powder compaction as well as by those working in industry, either using powder compaction to make products or using products made by powder compaction.

Download or read book Advanced Materials Processing and Manufacturing written by Yogesh Jaluria and published by Springer. This book was released on 2018-05-24 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on advanced processing of new and emerging materials, and advanced manufacturing systems based on thermal transport and fluid flow. It examines recent areas of considerable growth in new and emerging manufacturing techniques and materials, such as fiber optics, manufacture of electronic components, polymeric and composite materials, alloys, microscale components, and new devices and applications. The book includes analysis, mathematical modeling, numerical simulation and experimental study of processes for prediction, design and optimization. It discusses the link between the characteristics of the final product and the basic transport mechanisms and provides a foundation for the study of a wide range of manufacturing processes. Focuses on new and advanced methods of manufacturing and materials processing with traditional methods described in light of the new approaches; Maximizes reader understanding of the fundamentals of how materials change, what transport processes are involved, and how these can be simulated and optimized - concepts not covered elsewhere; Introduces new materials and applications in manufacturing and summarizes traditional processing methods, such as heat treatment, extrusion, casting, injection molding, and bonding, to show how they have evolved and how they could be used for meeting the challenges that we face today.

Download or read book Manufacturing Processes for Engineering Materials written by Serope Kalpakjian and published by Pearson Education India. This book was released on 1984 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.

Download or read book Engineering Materials and Processing Methods written by and published by . This book was released on 1971 with total page 1754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1929- include section Contents noted (1929-1939 called Metallurgical abstracts; Jan. 1940- Sept. 1945 called Engineering digest; Oct. 1945- called Materials & methods digest) Annual indexes of the abstracts and digest were prepared 1929-1941; beginning in 1942, included in the complete index to the periodical.

Download or read book Manufacturing Processes for Engineering Materials written by Serope Kalpakjian and published by Prentice Hall. This book was released on 1997 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text offers a quantitative and analytical approach to manufacturing processes. It provides a broad coverage of the major aspects of manufacturing processes and attempts to present a balanced view of the important fundamentals, analytical approaches and relevant applications. Examples and end of chapter problems are included as well as a summary of formulae for each chapter.

Download or read book The Competitive Edge written by National Research Council and published by National Academies Press. This book was released on 1991-02-01 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: To maintain competitiveness in the emerging global economy, U.S. manufacturing must rise to new standards of product quality, responsiveness to customers, and process flexibility. This volume presents a concise and well-organized analysis of new research directions to achieve these goals. Five critical areas receive in-depth analysis of present practices, needed improvement, and research priorities: Advanced engineered materials that offer the prospect of better life-cycle performance and other gains. Equipment reliability and maintenance practices for better returns on capital investment. Rapid product realization techniques to speed delivery to the marketplace. Intelligent manufacturing control for improved reliability and greater precision. Building a workforce with the multidisciplinary skills needed for competitiveness. This sound and accessible analysis will be useful to manufacturing engineers and researchers, business executives, and economic and policy analysts.