Download or read book Engineering Graphics Teacher s Guide written by Celeste Baine and published by . This book was released on 2008 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Creating Engineering Design Challenges written by Helen Meyer and published by National Science Teachers Association. This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The next time you want to integrate engineering practices into your classes, consider this book your own personal idea-starter. The 13 units in Creating Engineering Design Challenges provide innovative ways to make science and math relevant to middle and high school students through challenge-based learning and the engineering design process. Content areas include biology, chemistry, physical science, Earth science, and environmental science. Topics range from developing a recipe for cement to implementing geocaching to calculating accurate aim with slingshots and water balloons. You can be sure the units are classroom-ready because they were contributed by the same teachers who developed, used, and revised them. The teachers were participants in the Cincinnati Engineering Enhanced Math and Science program, a project funded by the National Science Foundation. They provide detailed accounts of their units as well as lesson plans and handouts. The book also offers guidance on fostering professional development to support and grow your school's engineering education practice. Creating Engineering Design Challenges can help you change your classroom environment, empower students, and move toward a more student-centered classroom culture that leads to deeper learning"--
Download or read book Engineering Graphics Essentials Fifth Edition written by Kirstie Plantenberg and published by SDC Publications. This book was released on 2016-09 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Graphics Essentials gives students a basic understanding of how to create and read engineering drawings by presenting principles in a logical and easy to understand manner. It covers the main topics of engineering graphics, including tolerancing and fasteners. This textbook also includes independent learning material containing supplemental content to further reinforce these principles. This textbook makes use of a large variety of exercise types that are designed to give students a superior understanding of engineering graphics and encourages greater interaction during lectures. The independent learning material allows students to explore the topics in the book on their own and at their own pace. The main content of the independent learning material contains pages that summarize the topics covered in the book. Each page has audio recordings that simulate a lecture environment. Interactive exercises are included and allow students to go through the instructor-led and in-class student exercises found in the book on their own. Also included are videos that walk students through examples and show them exactly how and why each step is performed.
Download or read book ICGG 2024 Proceedings of the 21st International Conference on Geometry and Graphics written by Kazuki Takenouchi and published by Springer Nature. This book was released on with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Graphics Essentials with AutoCAD 2018 Instruction written by Kirstie Plantenberg and published by SDC Publications. This book was released on 2017-09-04 with total page 953 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Graphics Essentials with AutoCAD 2018 Instruction gives students a basic understanding of how to create and read engineering drawings by presenting principles in a logical and easy to understand manner. It covers the main topics of engineering graphics, including tolerancing and fasteners, while also teaching students the fundamentals of AutoCAD 2018. This book features independent learning material containing supplemental content to further reinforce these principles. Through its many different exercises this text is designed to encourage students to interact with the instructor during lectures, and it will give students a superior understanding of engineering graphics and AutoCAD. The independent learning material allows students to go through the topics of the book independently. The main content of the material contains pages that summarize the topics covered in the book. Each page has voice over content that simulates a lecture environment. There are also interactive examples that allow students to go through the instructor led and in-class student exercises found in the book on their own. Video examples are also included to supplement the learning process.
Download or read book Teaching Engineering Second Edition written by Phillip C. Wankat and published by Purdue University Press. This book was released on 2015-01-15 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: The majority of professors have never had a formal course in education, and the most common method for learning how to teach is on-the-job training. This represents a challenge for disciplines with ever more complex subject matter, and a lost opportunity when new active learning approaches to education are yielding dramatic improvements in student learning and retention. This book aims to cover all aspects of teaching engineering and other technical subjects. It presents both practical matters and educational theories in a format useful for both new and experienced teachers. It is organized to start with specific, practical teaching applications and then leads to psychological and educational theories. The "practical orientation" section explains how to develop objectives and then use them to enhance student learning, and the "theoretical orientation" section discusses the theoretical basis for learning/teaching and its impact on students. Written mainly for PhD students and professors in all areas of engineering, the book may be used as a text for graduate-level classes and professional workshops or by professionals who wish to read it on their own. Although the focus is engineering education, most of this book will be useful to teachers in other disciplines. Teaching is a complex human activity, so it is impossible to develop a formula that guarantees it will be excellent. However, the methods in this book will help all professors become good teachers while spending less time preparing for the classroom. This is a new edition of the well-received volume published by McGraw-Hill in 1993. It includes an entirely revised section on the Accreditation Board for Engineering and Technology (ABET) and new sections on the characteristics of great teachers, different active learning methods, the application of technology in the classroom (from clickers to intelligent tutorial systems), and how people learn.
Download or read book Visual Strategies written by Felice Frankel and published by Yale University Press. This book was released on 2012-01-01 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: Helps scientists and engineers to communicate research results by showing how to create effective graphics for use in journal submissions, grant proposals, conference posters, presentations and more.
Download or read book Engineering Graphics Essentials with AutoCAD 2021 Instruction written by Kirstie Plantenberg and published by SDC Publications. This book was released on 2020-07 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Graphics Essentials with AutoCAD 2021 Instruction gives students a basic understanding of how to create and read engineering drawings by presenting principles in a logical and easy to understand manner. It covers the main topics of engineering graphics, including tolerancing and fasteners, while also teaching students the fundamentals of AutoCAD 2021. This book features independent learning material containing supplemental content to further reinforce these principles. Through its many different exercises this text is designed to encourage students to interact with the instructor during lectures, and it will give students a superior understanding of engineering graphics and AutoCAD. The independent learning material allows students to go through the topics of the book independently. The main content of the material contains pages that summarize the topics covered in the book. Each page has voice over content that simulates a lecture environment. There are also interactive examples that allow students to go through the instructor led and in-class student exercises found in the book on their own. Video examples are also included to supplement the learning process. Multimedia Content • Summary pages with audio lectures • Interactive exercises and puzzles • Videos demonstrating how to solve selected problems • AutoCAD video tutorials • Supplemental problems and solutions • Tutorial starter files Each chapter contains these types of exercises: • Instructor led in-class exercises Students complete these exercises in class using information presented by the instructor using the PowerPoint slides included in the instructor files. • In-class student exercises These are exercises that students complete in class using the principles presented in the lecture. • Video Exercises These exercises are found in the text and correspond to videos found in the independent learning material. In the videos the author shows how to complete the exercise as well as other possible solutions and common mistakes to avoid. • Interactive Exercises These exercises are found in the independent learning material and allow students to test what they've learned and instantly see the results. • End of chapter problems These problems allow students to apply the principles presented in the book. All exercises are on perforated pages that can be handed in as assignments. • Review Questions The review questions are meant to encourage students to recall and consider the content found in the text by having them formulate descriptive answers to these questions. • Crossword Puzzles Each chapter features a short crossword puzzle that emphasizes important terms, phrases, concepts, and symbols found in the text.
Download or read book Learning to Teach in South Africa written by W. E. Morrow and published by HSRC Publishers. This book was released on 2007 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learning to Teach in South Africa is a collection of essays by one of South Africa's most respected thinkers in education. These essays span the crucial years of democratic transition in South Africa and show the consistency of Morrow's thinking over this period. He argues for the retrieval of the primacy of the practice of professional teaching in our thinking about the transformation of schooling and education in our country, reveals the emergence of his seminal distinction between formal and epistemological access, puts forward some definite views about teacher education, and continues to struggle with relativism, one of the strands of the legacies of colonialism and Apartheid. These essays are an essential read for anyone interested in the transformation of education, and especially those who have a role in shaping its future.
Download or read book Handbook of Research on Advancing Equity and Inclusion Through Educational Technology written by Escudeiro, Paula and published by IGI Global. This book was released on 2023-08-09 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital technologies play a significant role in the popular imagination about the future of education, as they are a prominent aspect of modern education provision and practice across the globe. Due to the increased adoption of digital education materials during the COVID-19 pandemic, the pedagogical significance of digital technology has been amplified. Advancing Equity and Inclusion Through Educational Technology builds upon the available literature in equity and inclusion through educational technology while providing further research opportunities in this dynamic and growing field. It provides the opportunity for reflection on this crucial issue by increasing the understanding of the importance of inclusion and equity in the context of educational improvements and providing relevant academic work, empirical research findings, and an overview of this relevant field of study. Covering topics such as sustainable inclusion learning, virtual school press programs, and generic skills, this major reference work is a comprehensive and timely resource for educators and administrators of both K-12 and higher education, government officials, pre-service teachers, teacher educators, librarians, researchers, and academicians.
Download or read book The Workman s Manual of Engineering Drawing written by John Maxton and published by . This book was released on 1891 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Teacher s Guide and Solutions Manual for Engineering Graphics and Design Problems 3 written by James H. Earle and published by . This book was released on 1969 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Resources in Education written by and published by . This book was released on 2001 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Drawing written by K. L. Narayana and published by New Age International. This book was released on 2009-06-30 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the Book: Written by three distinguished authors with ample academic and teaching experience, this textbook, meant for diploma and degree students of Mechanical Engineering as well as those preparing for AMIE examination, incorporates the latest st
Download or read book Modern Management Based on Big Data III written by A.J. Tallón-Ballesteros and published by IOS Press. This book was released on 2022-09-29 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data is the basic ingredient of all Big Data applications, and Big Data technologies are constantly deploying new strategies to maximise efficiency and reduce the time taken to process information. This book presents the proceedings of MMBD2022, the third edition of the conference series Modern Management based on Big Data (MMBD). The conference was originally scheduled to take place from 15 to 18 August 2022 in Seoul, South Korea, but was changed to a virtual event on the same dates. Some 200 submissions were received for presentation at the conference, 52 of which were ultimately accepted after exhaustive review by members of the programme committee and peer-reviewers, who took into account the breadth and depth of the research topics and the scope of MMBD. Topics covered include data analytics, modelling, technologies and visualization, architectures for parallel processing systems, data mining tools and techniques, machine learning algorithms, and big data for engineering applications. There are also papers covering modern management, including topics such as strategy, decision making, manufacturing and logistics-based systems, engineering economy, information systems and law-based information treatment, and papers from a special session covering big data in manufacturing, retail, healthcare, accounting, banking, education, global trading, and e-commerce. Big data analysis and emerging applications were popular topics. The book includes many innovative and original ideas, as well as results of general significance, all supported by clear and rigorous reasoning and compelling evidence and methods, and will be of interest to all those working with Big Data.
Download or read book Catalog of Copyright Entries Third Series written by Library of Congress. Copyright Office and published by Copyright Office, Library of Congress. This book was released on 1961 with total page 2006 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes Part 1, Number 1 & 2: Books and Pamphlets, Including Serials and Contributions to Periodicals (January - December)
Download or read book Teachers Guide to Child Development written by Arch Oliver Heck and published by . This book was released on 1930 with total page 1084 pages. Available in PDF, EPUB and Kindle. Book excerpt:
