Download or read book Engineering Graphics for the First Year Student GTU written by Prof. P. J. Shah and published by S. Chand Publishing. This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Graphics, in its 13th year, has been succinctly revised for the Engineering students of 1st year of Gujarat Technological University, AhmedabadBeginning with the units, dimensions and standard, this book discusses the measurement and measurement errors. Then, it goes on to discuss electronics equipment,measurements of low resistence and A.C. bridges.Moreover,the book deals with the cathode ray oscilloscopes.Further,it describes various instrument calibration. Finally,the book deals with recorders and plotters.
Download or read book Engineering Graphics written by PJ Shah and published by S. Chand Publishing. This book was released on with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication deals with the language of engineers, i.e., Engineering Graphics. It is based on the syllabus of Gujarat Technological University and also useful for the students of other Indian Universities and the Technical Examination Boards of Various States. In this revised edition, a new scetion, ';Additional Problems' is given at last for adequate practice.
Download or read book Engineering Graphics GTU written by T. Jeyapoovan and published by Vikas Publishing House. This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a completely revised book in line with ‘Outcome Based Education (OBE)’ that is currently being followed by most universities. Also, the engineering drawings in the book have been prepared using the latest version of AutoCAD.
Download or read book ENGINEERING GRAPHICS FOR DEGREE written by K. C. JOHN and published by PHI Learning Pvt. Ltd.. This book was released on 2009-04-13 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed study of geometrical drawing through simple and well-explained worked-out examples. It is designed for first-year engineering students of all branches. The book is divided into seven modules. A topic is introduced in each chapter of a module with brief explanations and necessary pictorial views. Then it is discussed in detail through a number of worked-out examples, which are explained using step-by-step procedure and illustrating drawings. Module A covers the fundamentals of manual drafting, lettering, freehand sketching and dimensioning of views. Module B describes two-dimensional drawings like geometrical constructions, conics, miscellaneous curves and scales. Three-dimensional drawings, such as projections of points, lines, plane lamina, geometrical solids and sections of them are well explained in Module C. Module D deals with intersection of surfaces and their developments. Drawing of pictorial views is illustrated in Module E, which includes isometric projection, oblique projection and perspective projections. Module F covers the fundamentals of machine drawing. Finally, in Module G the book introduces computer-aided drafting (CAD) to make the readers familiar with the state-of-the-art techniques of drafting. Key Features : Follows the International Standard Organization (ISO) code of practice for drawing. Includes a large number of dimensioned illustrations, worked-out examples, and university questions and answers to explain the geometrical drawing process. Contains chapter-end exercises to help students develop their drawing skills.
Download or read book Engineering Graphics with an Introduction to AutoCAD written by Dr. A.R. Bapat and published by Allied Publishers. This book was released on 2004-02-14 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the world of drawing has changed from graphite technology (i.e. conventional pencils, drawing paper, instruments and associated skills) to graphic technology (i.e. computer assisted drawing and drafting), the basics of the subject are equally important in either of the approaches. The teaching-learning process for engineering drawing calls for more imaginative thinking on the part of the student than may be needed for learning other subjects and ingenious ways for the teacher for communicating with the students so as to develop a scheme that enables a student to translate 3D visualization into a 2D graphic representation on a drawing in an easy manner. Learning engineering drawing is thus learning a new language for effective communication and uniform understanding between people dealing with physical objects. The book also includes a chapter on AutoCAD which will serve as a good course material to students and teachers of engineering drawing. The language used for presentation has been simple, since the focus is the first year students just entering the engineering discipline. The CD enclosed with the book contains “Power point presentations on Conversion of Orthographic view to Isometric and Conversion of Pictorial view to Orthographic Projections” to facilitate students as well as the teachers.
Download or read book Engineering Drawing Graphics Using Autocad 2E written by T. Jeyapoovan and published by . This book was released on 2009-11-01 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ENGINEERING GRAPHICS written by K. C. JOHN and published by PHI Learning Pvt. Ltd.. This book was released on 2009-07-13 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed study of geometrical drawing through simple and well-explained worked-out examples and exercises. This book is designed for students of first year Engineering Diploma course, irrespective of their branches of study. The book is divided into seven modules. Module A covers the fundamentals of manual drafting, lettering, freehand sketching and dimensioning of views. Module B describes two-dimensional drawings like geometrical constructions, conics, miscellaneous curves and scales. Three-dimensional drawings, such as projections of points, lines, plane lamina, geometrical solids and their different sections are well-explained in Module C. Module D deals with intersection of surfaces and their developments. Drawing of pictorial views is illustrated in Module E, which includes isometric projection, oblique projection and perspective projections. The fundamentals of machine drawing are covered in Module F. Finally, in Module G, the book introduces computer-aided drafting (CAD) to make the readers familiar with the state-of-the-art techniques of drafting. KEY FEATURES : Follows the International Standard Organization (ISO) code of practice for drawing. Includes a large number of dimensioned illustrations, worked-out examples, and Polytechnic questions and answers to explain the geometrical drawing process. Contains chapter-end exercises to help students develop their drawing skills.
Download or read book Engineering Graphics written by D. McAdam and published by Don Mills, Ont. : Addison-Wesley. This book was released on 1999-01 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Suitable for post-secondary engineering graphics courses that are one-semester in length, this text provides a fresh perspective on engineering graphics that should appeal to instructors and students alike. The goal of the book is to engage the student in critical thinking about graphics problems that require visualization of three-dimensional objects. With a combined teaching experience of over 30 years in engineering graphics, the authors have created a text intended to equip students with the skills that they will need to succeed in their engineering course and careers. It covers the fundamentals of a one-semester graphics course (but can be used in a longer course).
Download or read book Textbook of Engineering Drawing written by Roop Lal and published by . This book was released on 2015-08 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Concise Introduction to Engineering Graphics written by Timothy Sexton and published by . This book was released on 2008-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Concise Introduction to Engineering Graphics (formerly titled Engineering Graphics Theory and Problems) gives students a basic understanding of how to create and read engineering drawings. The book consist of thirteen chapters that cover the basics of Engineering Graphics. The text is 142 pages in length and is followed by 40 exercise sheets. The exercise sheets both challenge the students and allow them to practice the topics covered in the text. Instructors have the choice of four different sets of exercise sheets to be bundled with this textbook. The text from the chapters are the same and the problem sets are similar. Instructors can switch the problem sets every semester to discourage students from sharing old assignments. This textbook may also be purchased without a workbook to be used as a text only.
Download or read book Engineering Graphics written by Basant Agrawal and published by Tata McGraw-Hill Education. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Written for the first year engineering students of all branches, this text covers the basic principles of Engineering Graphics course. Simple and easy-to-understand language is provide a firm understanding of the fundamental concepts. Systematic introduction of concepts, variety of solved examples, practice questions and excellent 2D & 3D illustrations make this text very useful for students." - From cover.
Download or read book Engineering Graphics written by Naveen Kumar S.C. Sharma and published by . This book was released on 2003-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book Engineering Graphics covers the relevant syllabus of 1st semester of Engineering, U.P. Technical University Students and other professional institutions and also covers the requirements in drawings and communication for Engineering students. The aim of the book is to present a simple, straight forward text closely linked to clear line illustrations.
Download or read book Engineering Graphics written by A. M. Chandra and published by . This book was released on 2010 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Drawing and Graphic Technology written by Thomas E. French and published by . This book was released on 1993 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Graphics written by Spence and published by Prentice Hall. This book was released on 1988 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Graphics For RGPV written by Shah and published by Pearson Education India. This book was released on 2011 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Graphics: For RGPV has been customized to meet the requirements of the students of Rajiv Gandhi Proudyogiki Vishwavidyalaya in their first year. This book covers all the fundamental topics of engineering drawing while focusing on the logic behind each concept and method. The unique features of the book, such as its cutting-edge pedagogy, chapters mapped exactly in sequence with the university syllabus, the clear and step-by-step method of instruction and the addition of solved university question papers, will definitely help students excel in their exams.
Download or read book Engineering Graphics written by William Perkins Spence and published by . This book was released on 1988 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
