Download or read book Engineering Geology Applied to the Design and Operation of Underground Coal Mines written by C. Richard Dunrud and published by DIANE Publishing. This book was released on 2000-07 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This course on engineering geology applied to underground coal mining has been taught to geologists & engineers of State & Federal governments, mining companies, & consulting firms involved in designing, developing, & operating underground coal mines. Discusses in detail how the disciplines of geology & geotechnology apply to exploration, design, & operation of underground coal mines. It is intended for practicing scientists, engineering geologists, & engineers. Shows how the disciplines of geology, geotechnology, & mining engineering can be integrated & used to make underground coal mining safer, more efficient, & more environmentally acceptable.
Download or read book Engineering Geology Applied to the Design and Operation of Underground Coal Mines written by C. Richard Dunrud and published by . This book was released on 1996 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book U S Geological Survey Bulletin written by and published by . This book was released on 1983 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ground Engineering Principles and Practices for Underground Coal Mining written by J.M. Galvin and published by Springer. This book was released on 2016-02-02 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book teaches readers ground engineering principles and related mining and risk management practices associated with underground coal mining. It establishes the basic elements of risk management and the fundamental principles of ground behaviour and then applies these to the essential building blocks of any underground coal mining system, comprising excavations, pillars, and interactions between workings. Readers will also learn about types of ground support and reinforcement systems and their operating mechanisms. These elements provide the platform whereby the principles can be applied to mining practice and risk management, directed primarily to bord and pillar mining, pillar extraction, longwall mining, sub-surface and surface subsidence, and operational hazards. The text concludes by presenting the framework of risk-based ground control management systems for achieving safe workplaces and efficient mining operations. In addition, a comprehensive reference list provides additional sources of information on the subject. Throughout, a large variety of examples show good and bad mining situations in order to demonstrate the application, or absence, of the established principles in practice. Written by an expert in underground coal mining and risk management, this book will help students and practitioners gain a deep understanding of the basic principles behind designing and conducting mining operations that are safe, efficient, and economically viable. Provides a comprehensive coverage of ground engineering principles within a risk management framework Features a large variety of examples that show good and poor mining situations in order to demonstrate the application of the established principles in practice Ideal for students and practitioners About the author Emeritus Professor Jim Galvin has a relatively unique combination of industrial, research and academic experience in the mining industry that spans specialist research and applied knowledge in ground engineering, mine management and risk management. His career encompasses directing ground engineering research groups in South Africa and Australia; practical mining experience, including active participation in the mines rescue service and responsibility for the design, operation, and management of large underground coal mines and for the consequences of loss of ground control as a mine manager; appointments as Professor and Head of the School of Mining Engineering at the University of New South Wales; and safety advisor to a number of Boards of Directors of organisations associated with mining. Awards Winner of the ACARP Excellence Research Award 2016. The Australian Coal Industry's Research Program selects recipients to receive ACARP Research and Industry Excellence Awards every two years. The recipients are selected on the recommendation of technical committees. They are honored for achievement of a considerable advance in an area of importance to the Australian coal mining industry. An important criterion is the likelihood of the results from the project being applied in mines. Winner of the Merv Harris Award from the Mine Managers Association of Australia. The Merv Harris Award is named for Merv Harris who donated money to be invested for a continuing award in 1988. With the award, the Mine Managers Association of Australia honors members of the Association who demonstrate technical achievement in the Australian Coal Mining Industry. The first award was granted in 1990, since then, only two people have received this honor. The book has received the following awards.... AGS (Australian Geomechanics Society) congratulates Dr Galvin for these awards
Download or read book Engineering Geology for Underground Rocks written by Suping Peng and published by Springer Science & Business Media. This book was released on 2007-10-14 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Professionals and students in any geology-related field will find this an essential reference. It clearly and systematically explains underground engineering geology principles, methods, theories and case studies. The authors lay out engineering problems in underground rock engineering and how to study and solve them. The book specially emphasizes mechanical and hydraulic couplings in rock engineering for wellbore stability, mining near aquifers and other underground structures where inflow is a problem.
Download or read book Design of Underground Hard Coal Mines written by J. Pazdziora and published by Elsevier. This book was released on 2012-12-02 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The escalating worldwide demand for energy has had the effect, among other things, of promoting the development of coal mining. In some countries specialist design offices were set up and students trained as specialists in mine design and construction. Poland, a country having mining traditions stretching over many centuries, is a good example, and has gained a place in the forefront, not only as a coal producer and exporter, but also as an originator and exporter of technical mining know-how. The author of this book has himself had 25 years of practical experience in mine design, in the supervision of mining investment implementation both at home and abroad, and also in directing the activities of the Chief Mine Design and Studies Office in Poland, plus more than 20 years' teaching experience in the training of mining engineers, in particular as head of the Mine Design Department of the Mining Faculty at the Silesian Polytechnic University in Gliwice. This vast wealth of experience has prompted him to write the present book which discusses the basic problems met with in the design of underground hard-coal mines.The author's primary aim has been to deal with all those questions in mine design which have not yet been answered in mining textbooks and which, from his own personal experience, he considers to be of importance. Accordingly, he presents the general principles governing the design of new mines and the reconstruction of working mines, the development of mining regions, the design of coal-preparation plant, and energy economy in mines. Making use of the broad experience gained by the Polish mining industry in the implementation of mining investment projects, he has quoted several examples of technical and organizational solutions which effectively shorten the mine construction cycle.The book is addressed chiefly to investors and engineers engaged in preparing plans for the development of mining regions, for the construction of new mines, and the reconstruction of existing mines and preparation plants, as well as to students in mining departments of technical schools and universities. The information offered here is of great practical value and may well stimulate the development of new ideas for design and implementation concepts.
Download or read book A Master Environmental Control and Mine System Design Simulator for Underground Coal Mining Geology and reserves subsystem written by Pennsylvania State University. Dept. of Mineral Engineering and published by . This book was released on 1974 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coal written by National Research Council and published by National Academies Press. This book was released on 2007-12-21 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal will continue to provide a major portion of energy requirements in the United States for at least the next several decades. It is imperative that accurate information describing the amount, location, and quality of the coal resources and reserves be available to fulfill energy needs. It is also important that the United States extract its coal resources efficiently, safely, and in an environmentally responsible manner. A renewed focus on federal support for coal-related research, coordinated across agencies and with the active participation of the states and industrial sector, is a critical element for each of these requirements. Coal focuses on the research and development needs and priorities in the areas of coal resource and reserve assessments, coal mining and processing, transportation of coal and coal products, and coal utilization.
Download or read book Geologic Hazards and Roof Stability in Coal Mines written by Gregory M. Molinda and published by . This book was released on 2003 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Engineering in Mines written by V. S. Vutukuri and published by Cambridge University Press. This book was released on 1986 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a detailed study on the design, operation and maintenance of mines in relationship to the total environment.
Download or read book Coal Mine Ground Control written by Marcel Talbot and published by . This book was released on 2016-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of coal mining is to obtain coal from the ground. Coal is valued for its energy content, and, since the 1880s, has been widely used to generate electricity. Steel and cement industries use coal as a fuel for extraction of iron from iron ore and for cement production. Coal mining has had many developments over the recent years, from the early days of men tunneling, digging and manually extracting the coal on carts, to large open cut and long wall mines. Mining at this scale requires the use of draglines, trucks, conveyors, jacks and shearers. The most economical method of coal extraction from coal seams depends on the depth and quality of the seams, and the geology and environmental factors. Coal mining processes are differentiated by whether they operate on the surface or underground. Surface mining and deep underground mining are the two basic methods of mining. The choice of mining method depends primarily on depth of burial, density of the overburden and thickness of the coal seam. Seams relatively close to the surface, at depths less than approximately 180 ft (50 m), are usually surface mined. Coal that occurs at depths of 180 to 300 ft (50 to 100 m) is usually deep mined, but in some cases surface mining techniques can be used. Most coal seams are too deep underground for opencast mining and require underground mining, a method that currently accounts for about 60 percent of world coal production. This book entitled Coal Mine Ground Control covers every major topic concerned with ground control in underground coal mines, with emphasis on the application of various ground control theories and techniques. The book reviews current general practices in underground mine layouts, roof control, and common ground control failures, and the discussion of the state-of-the-art of coal mine ground control technology. The book will also prove useful to practical engineers involved in either the design or the day-to-day operations of underground coal mines.
Download or read book Strata Mechanics in Coal Mining written by Michael L. Jeremic and published by CRC Press. This book was released on 2020-08-18 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is offered as a contribution to the spread of knowledge and understanding in the field of strata mechanics in coal mining. It is written for professionals in the coal mining industry and students of mining engineering and includes some of the author's own philosophy of coal mine stability.
Download or read book Progress in Coal Geology written by Geological Society of Australia. Coal Geology Group. Symposium and published by . This book was released on 1980 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design optimization in underground coal systems written by Virginia Polytechnic Institute and State University. Department of Mining and Minerals Engineering and published by . This book was released on 1976 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evolutionary and Revolutionary Technologies for Mining written by National Research Council and published by National Academies Press. This book was released on 2002-03-14 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Office of Industrial Technologies (OIT) of the U. S. Department of Energy commissioned the National Research Council (NRC) to undertake a study on required technologies for the Mining Industries of the Future Program to complement information provided to the program by the National Mining Association. Subsequently, the National Institute for Occupational Safety and Health also became a sponsor of this study, and the Statement of Task was expanded to include health and safety. The overall objectives of this study are: (a) to review available information on the U.S. mining industry; (b) to identify critical research and development needs related to the exploration, mining, and processing of coal, minerals, and metals; and (c) to examine the federal contribution to research and development in mining processes.
Download or read book Modern American Coal Mining written by Bise, Christopher J. and published by Society for Mining, Metallurgy, and Exploration. This book was released on 2013-10-18 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern American Coal Mining: Methods and Applications covers a full range of coal mining and coal industry topics, with chapters written by leading coal mining industry professionals and academicians. Highlights from the book include coal resources and distribution, mine design, advances in strata control and power systems, improvements in surface mining, ventilation to reduce fires and explosions, drilling and blasting, staffing requirement ratios, management and preplanning, and coal preparation and reclamation. The text is enhanced with 11 case studies that are representative of underground and surface mines in the United States. Narrative descriptions and appropriate mine plans are presented, with attention given to unique features and situations that are addressed through mine design and construction. A useful glossary is included, as are many examples, figures, equations and tables, to make the text even more useful.
Download or read book Rock Mechanics written by Barry H.G. Brady and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition has been completely revised to reflect the notable innovations in mining engineering and the remarkable developments in the science of rock mechanics and the practice of rock angineering taht have taken place over the last two decades. Although "Rock Mechanics for Underground Mining" addresses many of the rock mechanics issues that arise in underground mining engineering, it is not a text exclusively for mining applications. Based on extensive professional research and teaching experience, this book will provide an authoratative and comprehensive text for final year undergraduates and commencing postgraduate stydents. For profesional practitioners, not only will it be of interests to mining and geological engineers, but also to civil engineers, structural mining geologists and geophysicists as a standard work for professional reference purposes.
