Download or read book Engineering Education Quality Assurance written by Arun Patil and published by Springer Science & Business Media. This book was released on 2009-09-16 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the rapid globalization of higher education as well as related changes in social, political, economic, and other conditions over the last 25 years there have been ever increasing expectations for higher education, in general, and Engineering Education, in particular. These expectations are often expressed in terms of the need for Quality Assurance locally, regionally, and globally. In some cases, there is a long tradition of independence and self-regulation of higher education institutions and programs. In other contexts, there has been c- siderable governmental regulation and disciplinary direction over time. The authors in this volume represent essentially all continents and 15 different countries. The common issues that they raise and their accounts of past, present, and future ch- lenges provide a snapshot of the current state of Quality Assurance in higher edu- tion and Engineering Education. This volume begins with an overview of the history and background of Quality Assurance in higher education and Engineering Education over the last century. The discussion of the historical, philosophical, political, and social background of Quality Assurance sets the stage for the other chapters. Following this broad brush stoke introduction, in the next part of the book, authors describe the general issues and challenges facing Quality Assurance in the twenty-first century from both regional and national perspectives. These authors have extensive experience in the area of Quality Assurance and have observed its growth and develop first hand over many years.
Download or read book Engineering Education written by Firoz Alam and published by CRC Press. This book was released on 2020-12-17 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the key concepts, objectives and processes relating to the professional accreditation of engineering bachelor (honours) degrees. The contemporary context of accreditation is examined in terms of the globalised nature of both the engineering profession and higher education. Examples of the processes relating to single and dual accreditation are provided, with examination of the Washington Accord and the requirements of the European Network for Accreditation of Engineering Education. Details are also provided as to how learning outcomes can be structured to demonstrate compliance with accreditation criteria. The final chapters deal briefly with quality assurance processes used in education and the current international quality ranking systems which exist. This book will provide the reader with a detailed examination of outcome based education within the context of Bachelor of Engineering (honours) degrees. A key feature of this book is the side-by-side comparison of different accreditation criteria and a thorough discussion of the relatively new phenomenon of dual accreditation. The book seeks to provide a very clear explanation and exploration of accreditation within the context of engineering education and will benefit those practitioners involved in the accreditation process.
Download or read book Engineering Education written by European Society for Engineering Education. Annual Conference and published by vdf Hochschulverlag AG. This book was released on 1999 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Technology Engineering Education and Engineering Management written by Deyao Tan and published by CRC Press. This book was released on 2015-06-25 with total page 1213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented at the International Conference on Engineering Technologies, Engineering Education and Engineering Management (ETEEEM 2014, Hong Kong, 15-16 November 2014). A wide variety of topics is included in the book: - Engineering Education - Education Engineering and Technology - Methods and Learning Mechanism
Download or read book Software Quality Engineering written by Jeff Tian and published by John Wiley & Sons. This book was released on 2005-05-20 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The one resource needed to create reliable software This text offers a comprehensive and integrated approach to software quality engineering. By following the author's clear guidance, readers learn how to master the techniques to produce high-quality, reliable software, regardless of the software system's level of complexity. The first part of the publication introduces major topics in software quality engineering and presents quality planning as an integral part of the process. Providing readers with a solid foundation in key concepts and practices, the book moves on to offer in-depth coverage of software testing as a primary means to ensure software quality; alternatives for quality assurance, including defect prevention, process improvement, inspection, formal verification, fault tolerance, safety assurance, and damage control; and measurement and analysis to close the feedback loop for quality assessment and quantifiable improvement. The text's approach and style evolved from the author's hands-on experience in the classroom. All the pedagogical tools needed to facilitate quick learning are provided: * Figures and tables that clarify concepts and provide quick topic summaries * Examples that illustrate how theory is applied in real-world situations * Comprehensive bibliography that leads to in-depth discussion of specialized topics * Problem sets at the end of each chapter that test readers' knowledge This is a superior textbook for software engineering, computer science, information systems, and electrical engineering students, and a dependable reference for software and computer professionals and engineers.
Download or read book Mechanical Engineering Education written by J. Paulo Davim and published by John Wiley & Sons. This book was released on 2012-12-17 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Engineering is defined nowadays as a discipline “which involves the application of principles of physics, design, manufacturing and maintenance of mechanical systems”. Recently, mechanical engineering has also focused on some cutting-edge subjects such as nanomechanics and nanotechnology, mechatronics and robotics, computational mechanics, biomechanics, alternative energies, as well as aspects related to sustainable mechanical engineering. This book covers mechanical engineering higher education with a particular emphasis on quality assurance and the improvement of academic institutions, mechatronics education and the transfer of knowledge between university and industry.
Download or read book Engineering written by Quality Assurance Agency for Higher Education and published by . This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Software Engineering Education Going Agile written by Stephan Kassel and published by Springer. This book was released on 2016-05-26 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents and discusses the state of the art and future trends in software engineering education, with a focus on agile methods and their budgetary implications. It introduces new and innovative methods, models and frameworks to focus the training towards the industry’s requirements. The range of topics covered includes education models for software engineering, development of the software engineering discipline, innovation and evaluation of software engineering education, curricula for software engineering education, requirements and cultivation of outstanding software engineers for the future and cooperation models for industry and software engineering education.
Download or read book Technology and Tools in Engineering Education written by Prathamesh P. Churi and published by CRC Press. This book was released on 2021-10-27 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the innovative and research methods of the teaching-learning process in Engineering field. It focuses on the use of technology in the field of education. It also provides a platform to academicians and educationalists to share their ideas and best practices. The book includes specific pedagogy used in engineering education. It offers case studies and classroom practices which also include those used in distance mode and during the COVID-19 pandemic. It provides comparisons of national and international accreditation bodies, directions on cost-effective technology, and it discusses advanced technologies such as VR and augmented reality used in education. This book is intended for research scholars who are pursuing their masters and doctoral studies in the engineering education field as well as teachers who teach undergraduate and postgraduate courses to engineering students.
Download or read book Rethinking Engineering Education written by Edward F. Crawley and published by Springer Science & Business Media. This book was released on 2014-04-02 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes an approach to engineering education that integrates a comprehensive set of personal, interpersonal, and professional engineering skills with engineering disciplinary knowledge in order to prepare innovative and entrepreneurial engineers. The education of engineers is set in the context of engineering practice, that is, Conceiving, Designing, Implementing, and Operating (CDIO) through the entire lifecycle of engineering processes, products, and systems. The book is both a description of the development and implementation of the CDIO model and a guide to engineering programs worldwide that seek to improve the education of young engineers.
Download or read book Engineering Education and Management written by Liangchi Zhang and published by Springer Science & Business Media. This book was released on 2011-11-23 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the proceedings of the selected papers presented at 2011 International Conference on Engineering Education and Management (ICEEM2011) held in Guangzhou, China, during November 18-20, 2011. ICEEM2011 is one of the most important conferences in the field of Engineering Education and Management and is co-organized by Guangzhou University, The University of New South Wales, Zhejiang University and Xi’an Jiaotong University. The conference aims to provide a high-level international forum for scientists, engineers, and students to present their new advances and research results in the field of Engineering Education and Management. This volume comprises 121 papers selected from over 400 papers originally submitted by universities and industrial concerns all over the world. The papers specifically cover the topics of Management Science and Engineering, Engineering Education and Training, Project/Engineering Management, and Other related topics. All of the papers were peer-reviewed by selected experts. The papers have been selected for this volume because of their quality and their relevancy to the topic. This volume will provide readers with a broad overview of the latest advances in the field of Engineering Education and Management. It will also constitute a valuable reference work for researchers in the fields of Engineering Education and Management.
Download or read book Transcending Humanitarian Engineering Strategies for Sustainable Futures written by Koumpouros, Yiannis and published by IGI Global. This book was released on 2023-03-13 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering disciplines have a pivotal role to play in the solution of global humanitarian challenges, enabling our society to take steps towards sustainable human development. Engineering can be used as the catalyst for the change that the world needs; from water supply to renewable energy provision, engineering knowledge and application underpin the responses needed for us all to pursue a sustainable future. Because the issue of humanitarianism is not just engineering problems, there is a need to engage with professionals, breakdown previously siloed approaches and obdurate practices, and introduce interdisciplinary education and training to enhance combinational expertise. Transcending Humanitarian Engineering Strategies for Sustainable Futures provides relevant theoretical frameworks and the latest empirical research findings in the area of humanitarian engineering as a means for future-proofing our communities. Covering topics such as disaster mitigation, natural hazards, and land use change, this premier reference source is an excellent resource for engineers, environmentalists, sociologists, anthropologists, urban planners, government officials, students and educators of higher education, non-profit organizations, researchers, and academicians.
Download or read book Engineering Reading College and School of Arts and Design written by and published by . This book was released on 2002 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Global Advances in Engineering Education written by J.P. Mohsen and published by CRC Press. This book was released on 2019-05-03 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The engineering profession is at a critical juncture that requires reforming engineering education. The supply of engineers is declining whereas the nature of the demand is changing. Formulating a response to these challenges demands the adoption of new and innovative tools and methods for promoting the expansion of the community while supporting these evolving requirements. Initiatives to entice and retain students are being employed to support growth objectives. Modern technologies are reshaping reform efforts. This book discusses the state of affairs in the field of engineering education and presents practical steps for addressing the challenges in order to march toward a brighter future. Features Covers the latest state of engineering education in the North America, Europe, Middle East, North Africa, and Far East Asia Discusses advances in science, technology, engineering, and mathematics and community engagement Outlines applications of digital technologies to enhance learning Provides advances in remote and online instructions for engineering education Presents discussions on innovation, leadership, and ethics
Download or read book Total Quality Management in Higher Education written by Sayeda Begum and published by Taylor & Francis. This book was released on 2020-12-23 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a conceptual, theoretical, and empirical overview of the role of total quality management (TQM) in Indian higher education from the perspectives of the engineering faculty, students, and alumni. It identifies the critical dimensions to measure the performance of TQM. This volume conceptualizes the service quality of higher education, especially in engineering education, through empirical assessment of the services being provided to major stakeholders like the faculty, the students, and the alumni. It highlights the significance of TQM in creating success stories while discussing the importance of improved productivity and quality in higher education with respect to the quality of engineering educational institutions. Further, the book provides a complete framework for the implementation of TQM in engineering educational institutions. This book will be of interest to students, teachers, and researchers of education and management studies. It will also be useful for educationalists, education administrators, education policymakers and bureaucrats, management professionals, business leaders, and the governing bodies of higher education institutions.
Download or read book e Learning e Education and Online Training written by Shuai Liu and published by Springer. This book was released on 2018-06-29 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 4rd International Conference on e-Learning, e-Education, and Online Training, eLEOT 2018, held in Shanghai, China, in April 2018. The 49 revised full papers presented were carefully reviewed and selected from 120 submissions. They focus on most recent and innovative trends in this broad area, ranging from distance education to collaborative learning, from interactive learning environments to the modelling of STEM (Science, Technology, Mathematics, Engineering) curricula.
Download or read book Handbook of Research on Engineering Education in a Global Context written by Smirnova, Elena V. and published by IGI Global. This book was released on 2018-08-31 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering education methods and standards are important features of engineering programs that should be carefully designed both to provide students and stakeholders with valuable, active, integrated learning experiences, and to provide a vehicle for assessing program outcomes. With the driving force of the globalization of the engineering profession, standards should be developed for mutual recognition of engineering education across the world, but it is proving difficult to achieve. The Handbook of Research on Engineering Education in a Global Context provides innovative insights into the importance of quality training and preparation for engineering students. It explores the common and current problems encountered in areas such as quality and standards, management information systems, innovation and enhanced learning technologies in education, as well as the challenges of employability, entrepreneurship, and diversity. This publication is vital reference source for science and engineering educators, engineering professionals, and educational administrators interested in topics centered on the education of students in the field of engineering.
