Download or read book Engineering Statics Labs with SOLIDWORKS Motion 2015 written by Huei-Huang Lee and published by SDC Publications. This book was released on 2015 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as a software-based lab book to complement a standard textbook in an engineering statics course, which is usually taught at the undergraduate level. This book can also be used as an auxiliary workbook in a CAE or Finite Element Analysis course for undergraduate students. Each book comes with a disc containing video demonstrations, a quick introduction to SOLIDWORKS, and all the part files used in the book. This textbook has been carefully developed with the understanding that CAE software has developed to a point that it can be used as a tool to aid students in learning engineering ideas, concepts and even formulas. These concepts are demonstrated in each section of this book. Using the graphics-based tools of SOLIDWORKS Motion can help reduce the dependency on mathematics to teach these concepts substantially. The contents of this book have been written to match the contents of most statics textbooks. There are 8 chapters in this book. Each chapter is designed as one week’s workload, consisting of 2 to 3 sections. Each section is designed for a student to follow the exact steps in that section and learn a concept or topic of statics. Typically, each section takes 15-40 minutes to complete the exercises. Each copy of this book comes with a disc containing videos that demonstrate the steps used in each section of the book, a 123 page introduction to Part and Assembly Modeling with SOLIDWORKS in PDF format, and all the files readers may need if they have any trouble. The concise introduction to SOLIDWORKS PDF is designed for those students who have no experience with SOLIDWORKS and want to feel more comfortable working on the exercises in this book. All of the same content is available for download on the book’s companion website.

Download or read book Finite Element Simulations with ANSYS Workbench 17 written by Huei-Huang Lee and published by SDC Publications. This book was released on 2017 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite Element Simulations with ANSYS Workbench 17 is a comprehensive and easy to understand workbook. Printed in full color, it utilizes rich graphics and step-by-step instructions to guide you through learning how to perform finite element simulations using ANSYS Workbench. Twenty seven real world case studies are used throughout the book. Many of these case studies are industrial or research projects that you build from scratch. Prebuilt project files are available for download should you run into any problems. Companion videos, that demonstrate exactly how to perform each tutorial, are also available Relevant background knowledge is reviewed whenever necessary. To be efficient, the review is conceptual rather than mathematical. Key concepts are inserted whenever appropriate and summarized at the end of each chapter. Additional exercises or extension research problems are provided as homework at the end of each chapter. A learning approach emphasizing hands-on experiences spreads though this entire book. A typical chapter consists of 6 sections. The first two provide two step-by-step examples. The third section tries to complement the exercises by providing a more systematic view of the chapter subject. The following two sections provide more exercises. The final section provides review problems.

Download or read book Mechanics of Materials Labs with SolidWorks Simulation 2014 written by Huei-Huang Lee and published by SDC Publications. This book was released on 2014 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as a software-based lab book to complement a standard textbook in a mechanics of material course, which is usually taught at the undergraduate level. This book can also be used as an auxiliary workbook in a CAE or Finite Element Analysis course for undergraduate students. Each book comes with a disc containing video demonstrations, a quick introduction to SolidWorks, and all the part files used in the book. -- back cover.

Download or read book Engineering Dynamics Labs with SolidWorks Motion 2014 written by Huei-Huang Lee and published by SDC Publications. This book was released on 2014 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as a software-based lab book to complement a standard textbook in an engineering dynamics course, which is usually taught at the undergraduate level. This book can also be used as an auxiliary workbook in a CAE or Finite Element Analysis course for undergraduate students. Each book comes with a disc containing video demonstrations, a quick introduction to SolidWorks eBook, and all the part files used in the book. This textbook has been carefully developed with the understanding that CAE software has developed to a point that it can be used as a tool to aid students in learning engineering ideas, concepts and even formulas. These concepts are demonstrated in each section of this book. Using the graphics-based tools of SolidWorks Simulation can help reduce the dependency on mathematics to teach these concepts substantially. The contents of this book have been written to match the contents of most mechanics of materials textbooks. There are 11 chapters in this book. Each chapter contains two sections. Each section is designed for a student to follow the exact steps in that section and learn a concept or topic of Engineering Dynamics. Typically, each section takes 20-40 minutes to complete the exercises. Each copy of this book comes with a disc containing videos that demonstrate the steps used in each section of the book, a 123 page introduction to Part and Assembly Modeling with SolidWorks in PDF format, and all the files readers may need if they have any trouble. The concise introduction to SolidWorks PDF is designed for those students who have no experience with SolidWorks and want to feel more comfortable working on the exercises in this book. All of the same content is available for download on the book’s companion website.

Download or read book Mechanics of Materials Labs with SolidWorks Simulation 2013 written by Huei-Huang Lee and published by SDC Publications. This book was released on 2013-10-23 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as a software-based lab book to complement a standard textbook in a mechanics of material course, which is usually taught in undergraduate courses. This book can also be used as an auxiliary workbook in a CAE or Finite Element Analysis course for undergraduate students. Each book comes with a disc containing video demonstrations, a quick introduction to SolidWorks, and all the part files used in the book. This textbook has been carefully developed with the understanding that CAE software has developed to a point that it can be used as a tool to aid students in learning engineering ideas, concepts and even formulas. These concepts are demonstrated in each section of this book. Using the graphics-based tools of SolidWorks Simulation can help reduce the dependency on mathematics to teach these concepts substantially. The contents of this book have been written to match the contents of most mechanics of materials textbooks. There are 14 chapters in this book. Each chapter is designed as one week’s workload, consisting of 2 to 3 sections. Each section is designed for a student to follow the exact steps in that section and learn a concept or topic of mechanics of materials. Typically, each section takes 15-40 minutes to complete the exercises. Each copy of this book comes with a disc containing videos that demonstrate the steps used in each section of the book, a 121 page introduction to Part and Assembly Modeling with SolidWorks in PDF format, and all the files readers may need if they have any trouble. The concise introduction to SolidWorks pdf is designed for those students who have no experience with SolidWorks and want to feel more comfortable working on the exercises in this book. All of the same content is available for download on the book’s companion website.

Download or read book Engineering Dynamics Labs with SOLIDWORKS Motion 2015 written by Huei-Huang Lee and published by SDC Publications. This book was released on 2015-04 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as a software-based lab book to complement a standard textbook in an engineering dynamics course, which is usually taught at the undergraduate level. This book can also be used as an auxiliary workbook in a CAE or Finite Element Analysis course for undergraduate students. Each book comes with a disc containing video demonstrations, a quick introduction to SOLIDWORKS eBook, and all the part files used in the book. This textbook has been carefully developed with the understanding that CAE software has developed to a point that it can be used as a tool to aid students in learning engineering ideas, concepts and even formulas. These concepts are demonstrated in each section of this book. Using the graphics-based tools of SOLIDWORKS Motion can help reduce the dependency on mathematics to teach these concepts substantially. The contents of this book have been written to match the contents of most mechanics of materials textbooks. There are 11 chapters in this book. Each chapter contains two sections. Each section is designed for a student to follow the exact steps in that section and learn a concept or topic of Engineering Dynamics. Typically, each section takes 20-40 minutes to complete the exercises. Each copy of this book comes with a disc containing videos that demonstrate the steps used in each section of the book, a 123 page introduction to Part and Assembly Modeling with SOLIDWORKS in PDF format, and all the files readers may need if they have any trouble. The concise introduction to SOLIDWORKS PDF is designed for those students who have no experience with SOLIDWORKS and want to feel more comfortable working on the exercises in this book. All of the same content is available for download on the book’s companion website.

Download or read book Thermal Analysis with SOLIDWORKS Simulation 2015 and Flow Simulation 2015 written by Paul Kurowski and published by SDC Publications. This book was released on 2015 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Analysis with SOLIDWORKS Simulation 2015 goes beyond the standard software manual. It concurrently introduces the reader to thermal analysis and its implementation in SOLIDWORKS Simulation using hands-on exercises. A number of projects are presented to illustrate thermal analysis and related topics. Each chapter is designed to build on the skills and understanding gained from previous exercises. Thermal Analysis with SOLIDWORKS Simulation 2015 is designed for users who are already familiar with the basics of Finite Element Analysis (FEA) using SOLIDWORKS Simulation or who have completed the book Engineering Analysis with SOLIDWORKS Simulation 2015. Thermal Analysis with SOLIDWORKS Simulation 2015 builds on these topics in the area of thermal analysis. Some understanding of FEA and SOLIDWORKS Simulation is assumed. Topics covered Analogies between thermal and structural analysisHeat transfer by conductionHeat transfer by convectionHeat transfer by radiationThermal loads and boundary conditionsThermal resistanceThermal stressesThermal bucklingModeling techniques in thermal analysisPresenting results of thermal analysis

Download or read book Programming and Engineering Computing with MATLAB 2021 written by Huei-Huang Lee and published by SDC Publications. This book was released on with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed for undergraduate students completely new to programming with MATLAB. Case studies and examples are used extensively throughout this book and are at the core of what makes this book so unique. The author believes that the best way to learn MATLAB is to study programs written by experienced programmers and that the quality of these example programs determines the quality of the book. The examples in this book are carefully designed to teach you MATLAB programming as well as to inspire within you your own problem solving potential. Most of the examples used in this book are designed to solve a whole class of problems, rather than a single, specific problem. A learn by doing teaching approach is used all through the book. You are guided to tackle a problem using MATLAB commands first and then the commands are explained line by line. This process of learning through hands on experience is one of the most efficient and pain-free ways of learning MATLAB. This approach, together with the extensive use of ordered textboxes, figures, and tables, greatly reduces the size of the book, while still providing you with a book that’s comprehensive and easy to follow. The first chapter of this book introduces the MATLAB programming environment and familiarizes you with MATLAB’s core functionality. Chapters two through nine discuss basic MATLAB functionalities in a progressive and comprehensive way. The chapters start out simple and build in complexity as you advance through the book. Chapters ten through thirteen cover advanced topics that are particularly useful in college programs. Each chapter consists of sections, each covering a topic and providing one or more examples. Related MATLAB functions are organized at the end of a section. Additional exercise problems are provided at the end of chapters two through nine. Examples in each section are presented in a consistent way. An example is usually described first, followed by a MATLAB script. Any resulting text and graphics output (and in some cases inputs) that are produced from running a script are presented and discussed. Finally, the remainder of each section is devoted to explaining the purpose of the lines of the script. Who this book is for This book is developed mainly for undergraduate engineering students. It may be used in courses such as Computers in Engineering, or others that use MATLAB as a software platform. It can also be used as a self-study book for learning MATLAB. College level engineering examples are used in this book. Background knowledge for these engineering examples is illustrated as thoroughly as possible.

Download or read book Introduction to Embedded Systems Second Edition written by Edward Ashford Lee and published by MIT Press. This book was released on 2017-01-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.

Download or read book Finite Element Simulations with ANSYS Workbench 2021 written by Huei-Huang Lee and published by SDC Publications. This book was released on 2021-07 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: • A comprehensive easy to understand workbook using step-by-step instructions • Designed as a textbook for undergraduate and graduate students • Relevant background knowledge is reviewed whenever necessary • Twenty seven real world case studies are used to give readers hands-on experience • Comes with video demonstrations of all 45 exercises • Compatible with ANSYS Student 2021 • Printed in full color Finite Element Simulations with ANSYS Workbench 2021 is a comprehensive and easy to understand workbook. Printed in full color, it utilizes rich graphics and step-by-step instructions to guide you through learning how to perform finite element simulations using ANSYS Workbench. Twenty seven real world case studies are used throughout the book. Many of these case studies are industrial or research projects that you build from scratch. Prebuilt project files are available for download should you run into any problems. Companion videos, that demonstrate exactly how to perform each tutorial, are also available. Relevant background knowledge is reviewed whenever necessary. To be efficient, the review is conceptual rather than mathematical. Key concepts are inserted whenever appropriate and summarized at the end of each chapter. Additional exercises or extension research problems are provided as homework at the end of each chapter. A learning approach emphasizing hands-on experiences is utilized though this entire book. A typical chapter consists of six sections. The first two provide two step-by-step examples. The third section tries to complement the exercises by providing a more systematic view of the chapter subject. The following two sections provide more exercises. The final section provides review problems. Who this book is for This book is designed to be used mainly as a textbook for undergraduate and graduate students. It will work well in: • a finite element simulation course taken before any theory-intensive courses • an auxiliary tool used as a tutorial in parallel during a Finite Element Methods course • an advanced, application oriented, course taken after a Finite Element Methods course About the Videos Each copy of this book includes access to video instruction. In these videos the author provides a clear presentation of tutorials found in the book. The videos reinforce the steps described in the book by allowing you to watch the exact steps the author uses to complete the exercises. Table of Contents 1. Introduction 2. Sketching 3. 2D Simulations 4. 3D Solid Modeling 5. 3D Simulations 6. Surface Models 7. Line Models 8. Optimization 9. Meshing 10. Buckling and Stress Stiffening 11. Modal Analysis 12. Transient Structural Simulations 13. Nonlinear Simulations 14. Nonlinear Materials 15. Explicit Dynamics Index

Download or read book Industrial System Engineering for Drones written by Neeraj Kumar Singh and published by Apress. This book was released on 2019-07-15 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore a complex mechanical system where electronics and mechanical engineers work together as a cross-functional team. Using a working example, this book is a practical “how to” guide to designing a drone system. As system design becomes more and more complicated, systematic, and organized, there is an increasingly large gap in how system design happens in the industry versus what is taught in academia. While the system design basics and fundamentals mostly remain the same, the process, flow, considerations, and tools applied in industry are far different than that in academia. Designing Drone Systems takes you through the entire flow from system conception to design to production, bridging the knowledge gap between academia and the industry as you build your own drone systems. What You’ll LearnGain a high level understanding of drone systems Design a drone systems and elaborating the various aspects and considerations of design Review the principles of the industrial system design process/flow, and the guidelines for drone systems Look at the challenges, limitations, best practices, and patterns of system design Who This Book Is For Primarily for beginning or aspiring system design experts, recent graduates, and system design engineers. Teachers, trainers, and system design mentors can also benefit from this content.

Download or read book Beginner s Guide to SolidWorks 2015 Level I written by Alejandro Reyes and published by SDC Publications. This book was released on 2015-01-14 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to help new users learn the basic concepts of SolidWorks and good solid modeling techniques in an easy to follow guide that includes video instruction. It is a great starting point for those new to SolidWorks or as a teaching aid in classroom training to become familiar with the software’s interface, basic commands and strategies as users complete a series of models while learning different ways to accomplish a particular task. At the end of this book, you will have a fairly good understanding of the SolidWorks interface and the most commonly used commands for part modeling, assembly and detailing after completing a series of components and their 2D drawings complete with Bill of Materials. The book focuses on the processes to complete the modeling of a part, instead of focusing on individual software commands or operations, which are generally simple enough to learn. The author strived hard to include the commands required in the Certified SolidWorks Associate test as listed on the SolidWorks website, as well as several more. SolidWorks is an easy to use CAD software that includes many time saving tools that will enable new and experienced users to complete design tasks faster than before. Most commands covered in this book have advanced options, which may not be covered in this book. This is meant to be a starting point to help new users to learn the basic and most frequently used commands.

Download or read book Materials Design and Manufacturing for Sustainable Environment written by Santhakumar Mohan and published by Springer Nature. This book was released on 2021-02-06 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020). The primary focus is on emerging materials and cutting-edge manufacturing technologies for sustainable environment. The book covers a wide range of topics such as advanced materials, vibration, tribology, finite element method (FEM), heat transfer, fluid mechanics, energy engineering, additive manufacturing, robotics and automation, automobile engineering, industry 4.0, MEMS and nanotechnology, optimization techniques, condition monitoring, and new paradigms in technology management. Contents of this book will be useful to students, researchers, and practitioners alike.

Download or read book Finite Element Simulations with ANSYS Workbench 16 written by Huei-Huang Lee and published by SDC Publications. This book was released on 2015 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite Element Simulations with ANSYS Workbench 16 is a comprehensive and easy to understand workbook. It utilizes step-by-step instructions to help guide readers to learn finite element simulations. Twenty seven real world case studies are used throughout the book. Many of these cases are industrial or research projects the reader builds from scratch. All the files readers may need if they have trouble are available for download on the publishers website. Companion videos that demonstrate exactly how to preform each tutorial are available to readers by redeeming the access code that comes in the book. Relevant background knowledge is reviewed whenever necessary. To be efficient, the review is conceptual rather than mathematical. Key concepts are inserted whenever appropriate and summarized at the end of each chapter. Additional exercises or extension research problems are provided as homework at the end of each chapter. A learning approach emphasizing hands-on experiences spreads through this entire book. A typical chapter consists of 6 sections. The first two provide two step-by-step examples. The third section tries to complement the exercises by providing a more systematic view of the chapter subject. The following two sections provide more exercises. The final section provides review problems.

Download or read book Finite Element Simulations with ANSYS Workbench 2020 written by Huei-Huang Lee and published by SDC Publications. This book was released on 2020-09-18 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite Element Simulations with ANSYS Workbench 2020 is a comprehensive and easy to understand workbook. Printed in full color, it utilizes rich graphics and step-by-step instructions to guide you through learning how to perform finite element simulations using ANSYS Workbench. Twenty seven real world case studies are used throughout the book. Many of these case studies are industrial or research projects that you build from scratch. Prebuilt project files are available for download should you run into any problems. Companion videos, that demonstrate exactly how to perform each tutorial, are also available. Relevant background knowledge is reviewed whenever necessary. To be efficient, the review is conceptual rather than mathematical. Key concepts are inserted whenever appropriate and summarized at the end of each chapter. Additional exercises or extension research problems are provided as homework at the end of each chapter. A learning approach emphasizing hands-on experiences is utilized though this entire book. A typical chapter consists of six sections. The first two provide two step-by-step examples. The third section tries to complement the exercises by providing a more systematic view of the chapter subject. The following two sections provide more exercises. The final section provides review problems. Who this book is for This book is designed to be used mainly as a textbook for undergraduate and graduate students. It will work well in: • a finite element simulation course taken before any theory-intensive courses • an auxiliary tool used as a tutorial in parallel during a Finite Element Methods course • an advanced, application oriented, course taken after a Finite Element Methods course

Download or read book SOLIDWORKS 2017 in 5 Hours with Video Instruction written by David Planchard and published by SDC Publications. This book was released on 2017-02 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: SOLIDWORKS 2017 in 5 Hours with video instruction introduces the new user to the basics of using SOLIDWORKS 3D CAD software in five easy lessons. This book is intended for the student or designer that needs to learn SOLIDWORKS quickly and effectively for senior capstone, machine design, kinematics, dynamics, and other engineering and technology projects that use SOLIDWORKS as a tool. Engineers in industry are expected to have SOLIDWORKS skills for their company’s next project. Students need to learn SOLIDWORKS without taking a formal CAD course. Based on years of teaching SOLIDWORKS to engineering students, SOLIDWORKS 2017 in 5 Hours concentrates on the areas where the new user improves efficiency in the design modeling process. By learning the correct SOLIDWORKS skills and file management techniques, you gain the most knowledge in the shortest period of time. You develop a mini Stirling Engine and investigate the proper design intent and constraints. The mini Stirling Engine is based on the external combustion, closed cycle engine of Scottish inventor, Robert Stirling. In addition to 3D modeling, the engine can be used to teach and connect many engineering and physics principles. You begin with an overview of SOLIDWORKS and the User Interface (UI), its menus, toolbars and commands. With a quick pace, you learn the essentials of 2D sketching, part and assembly creation, preform motion study, develop detailed part and assembly drawings and much more.

Download or read book Lab on a Chip Devices and Micro Total Analysis Systems written by Jaime Castillo-León and published by Springer. This book was released on 2014-11-05 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all the steps in order to fabricate a lab-on-a-chip device starting from the idea, the design, simulation, fabrication and final evaluation. Additionally, it includes basic theory on microfluidics essential to understand how fluids behave at such reduced scale. Examples of successful histories of lab-on-a-chip systems that made an impact in fields like biomedicine and life sciences are also provided. This book also: · Provides readers with a unique approach and toolset for lab-on-a-chip development in terms of materials, fabrication techniques, and components · Discusses novel materials and techniques, such as paper-based devices and synthesis of chemical compounds on-chip · Covers the four key aspects of development: basic theory, design, fabrication, and testing · Provides readers with a comprehensive list of the most important journals, blogs, forums, and conferences where microfluidics and lab-on-a-chip news, methods, techniques and challenges are presented and discussed, as well as a list of companies providing design and simulation support, components, and/or developing lab-on-a-chip and microfluidic devices.