Download or read book Engineering Dynamics and Vibrations written by Junbo Jia and published by CRC Press. This book was released on 2018-12-12 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering dynamics and vibrations has become an essential topic for ensuring structural integrity and operational functionality in different engineering areas. However, practical problems regarding dynamics and vibrations are in many cases handled without success despite large expenditures. This book covers a wide range of topics from the basics to advances in dynamics and vibrations; from relevant engineering challenges to the solutions; from engineering failures due to inappropriate accounting of dynamics to mitigation measures and utilization of dynamics. It lays emphasis on engineering applications utilizing state-of-the-art information.

Download or read book Dynamics and Vibration written by Magd Abdel Wahab and published by Wiley. This book was released on 2008-06-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a new teaching methodology in Dynamics using E-learning, simulations and animation of mechanisms and mechanical vibrating systems. It covers Dynamics and Vibration modules that are taught at different undergraduate levels to the engineering students at Universities in the UK and worldwide. The content of the book is suitable for Level 1 Dynamics modules for Engineering students (Civil, Mechanical, Aerospace & Medical), as well as Level 2/3 Dynamics and Vibration Modules being taught to Mechanical, Aerospace & Medical Engineering students. In addition to the theory sections and the tutorial sheets provided after each chapter, software called DAMA, ‘Dynamic Analysis for Mechanical Application’, in which simulations of mechanisms and vibrating systems are implemented, is provided via a website. The DAMA software is packaged with everything it needs to work immediately. The simulations it contains are used to enhance students understanding of the motion and vibration of mechanical systems. The simulations include motion of a single cylinder engine, four-bar linkage mechanisms, gears and sliding/rotating rigid bars along with many others. The simulations are fully interactive so that any change in the input parameters is immediately reflected in the animation, output plots and output parameters.

Download or read book Structural Dynamics and Vibration in Practice written by Douglas Thorby and published by Butterworth-Heinemann. This book was released on 2008-01-08 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This straightforward text, primer and reference introduces the theoretical, testing and control aspects of structural dynamics and vibration, as practised in industry today. Written by an expert engineer of over 40 years experience, the book comprehensively opens up the dynamic behavior of structures and provides engineers and students with a comprehensive practice based understanding of the key aspects of this key engineering topic. Written with the needs of engineers of a wide range of backgrounds in mind, this book will be a key resource for those studying structural dynamics and vibration at undergraduate level for the first time in aeronautical, mechanical, civil and automotive engineering. It will be ideal for laboratory classes and as a primer for readers returning to the subject, or coming to it fresh at graduate level. It is a guide for students to keep and for practicing engineers to refer to: its worked example approach ensures that engineers will turn to Thorby for advice in many engineering situations. Presents students and practitioners in all branches of engineering with a unique structural dynamics resource and primer, covering practical approaches to vibration engineering while remaining grounded in the theory of the topic Written by a leading industry expert, with a worked example lead approach for clarity and ease of understanding Makes the topic as easy to read as possible, omitting no steps in the development of the subject; covers computer based techniques and finite elements

Download or read book Engineering Dynamics and Vibrations written by Junbo Jia and published by CRC Press. This book was released on 2018-12-12 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering dynamics and vibrations has become an essential topic for ensuring structural integrity and operational functionality in different engineering areas. However, practical problems regarding dynamics and vibrations are in many cases handled without success despite large expenditures. This book covers a wide range of topics from the basics to advances in dynamics and vibrations; from relevant engineering challenges to the solutions; from engineering failures due to inappropriate accounting of dynamics to mitigation measures and utilization of dynamics. It lays emphasis on engineering applications utilizing state-of-the-art information.

Download or read book System Dynamics and Mechanical Vibrations written by Dietmar Findeisen and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of "linear systems analysis" applied to dynamic systems as an approach to interdisciplinary system design beyond the related area of electrical engineering. The text gives an interpretation of mechanical vibrations based on the theory of dynamic systems, aiming to bridge the gap between existing theoretical methods in different engineering disciplines and to enable advanced students or professionals to model dynamic and vibrating systems with reference to communication and control processes. Emphasizing the theory it presents a balanced coverage of analytical principles and applications to vibrations with regard to mechatronic problems.

Download or read book Engineering Vibrations written by William J. Bottega and published by CRC Press. This book was released on 2014-12-11 with total page 919 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough study of the oscillatory and transient motion of mechanical and structural systems, Engineering Vibrations, Second Edition presents vibrations from a unified point of view, and builds on the first edition with additional chapters and sections that contain more advanced, graduate-level topics. Using numerous examples and case studies, the author reviews basic principles, incorporates advanced abstract concepts from first principles, and weaves together physical interpretation and fundamental principles with applied problem solving. This revised version combines the physical and mathematical facets of vibration, and emphasizes the connecting ideas, concepts, and techniques.

Download or read book Mechanical Vibration written by William John Palm and published by . This book was released on 2007 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model, analyze, and solve vibration problems, using modern computer tools. Featuring clear explanations, worked examples, applications, and modern computer tools, William Palm's Mechanical Vibration provides a firm foundation in vibratory systems. You'll learn how to apply knowledge of mathematics and science to model and analyze systems ranging from a single degree of freedom to complex systems with two and more degrees of freedom. Separate MATLAB sections at the end of most chapters show how to use the most recent features of this standard engineering tool, in the context of solving vibration problems. The text introduces Simulink where solutions may be difficult to program in MATLAB, such as modeling Coulomb friction effects and simulating systems that contain non-linearities. Ample problems throughout the text provide opportunities to practice identifying, formulating, and solving vibration problems. KEY FEATURES Strong pedagogical approach, including chapter objectives and summaries Extensive worked examples illustrating applications Numerous realistic homework problems Up-to-date MATLAB coverage The first vibration textbook to cover Simulink Self-contained introduction to MATLAB in Appendix A Special section dealing with active vibration control in sports equipment Special sections devoted to obtaining parameter values from experimental data

Download or read book Vibration Dynamics and Control written by Giancarlo Genta and published by Springer Science & Business Media. This book was released on 2008-11-16 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical engineering,and engineering discipline born of the needs of the industrial revolution, is once again asked to do its substantial share in the call for industrial renewal. The general call is urgent as we face p- found issues of productivity and competitiveness that require engineering solutions, among others. The Mechanical Engineering Series is a series f- turing graduate texts and research monographs intended to address the need for information in contemporary areas of mechanical engineering. The series is conceived as a comprehensive one that covers a broad range of concentrations important to mechanical engineering graduate - ucation and research. We are fortunate to have a distinguished roster of series editors, each an expert in one of the areas of concentration. The names of the series editors are listed on page vi of this volume. The areas of concentration are applied mechanics, biomechanics, computational - chanics, dynamic systems and control, energetics, mechanics of materials, processing, thermal science, and tribology. Preface After15yearssincethepublicationofVibrationofStructuresandMachines and three subsequent editions a deep reorganization and updating of the material was felt necessary. This new book on the subject of Vibration dynamics and control is organized in a larger number of shorter chapters, hoping that this can be helpful to the reader. New materialhas been added and many points have been updated. A larger number of examples and of exercises have been included.

Download or read book Engineering Vibration Analysis written by Valery A. Svetlitsky and published by Springer Science & Business Media. This book was released on 2012-11-07 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory of vibrations belongs to principal subjects needed for training mechani cal engineers in technological universities. Therefore, the basic goal of the mono graph "Advanced Theory of Vibrations 1" is to help students studying vibration theory for gaining experience in application of this theory for solving particular problems. Thus, while choosing the problems and methods to solve them, the close attention was paid to the applied content of vibration theory. The monograph is devoted to systems with a single degree of freedom and sys tems with a finite number of degrees of freedom. In particular, problems are for mulated associated with determination of frequencies and forms of vibrations, study of forced vibrations, analysis of both stable and unstable vibrations (includ ing those caused by periodic but anharmonic forces). The problems of nonlinear vibrations and of vibration stability, and those related to seeking probabilistic characteristics for solutions to these problems in the case of random forces are also considered. Problems related to parametric vibrations and statistical dynamics of mechanical systems, as well as to determination of critical parameters and of dy namic stability are also analyzed. As a rule, problems presented in the monograph are associated with particular mechanical systems and can be applied for current studies in vibration theory. Al lowing for interests of students independently studying theory of vibrations, the majority of problems are supplied with either detailed solutions or algorithms of the solutions.

Download or read book Engineering Vibration written by D. J. Inman and published by . This book was released on 2001 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction. Response to harmonic excitation. General forced response. Multiple-degree of -freedom systems. Design for vibration suppression. Distributed - parameter systems ...

Download or read book Mechanical Vibrations written by J. P. Den Hartog and published by Courier Corporation. This book was released on 2013-02-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic text combines the scholarly insights of its distinguished author with the practical, problem-solving orientation of an experienced industrial engineer. Abundant examples and figures, plus 233 problems and answers. 1956 edition.

Download or read book Vibrations and Waves in Continuous Mechanical Systems written by Peter Hagedorn and published by John Wiley & Sons. This book was released on 2007-10-22 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of vibrations is of fundamental importance in engineering and technology. Discrete modelling is sufficient to understand the dynamics of many vibrating systems; however a large number of vibration phenomena are far more easily understood when modelled as continuous systems. The theory of vibrations in continuous systems is crucial to the understanding of engineering problems in areas as diverse as automotive brakes, overhead transmission lines, liquid filled tanks, ultrasonic testing or room acoustics. Starting from an elementary level, Vibrations and Waves in Continuous Mechanical Systems helps develop a comprehensive understanding of the theory of these systems and the tools with which to analyse them, before progressing to more advanced topics. Presents dynamics and analysis techniques for a wide range of continuous systems including strings, bars, beams, membranes, plates, fluids and elastic bodies in one, two and three dimensions. Covers special topics such as the interaction of discrete and continuous systems, vibrations in translating media, and sound emission from vibrating surfaces, among others. Develops the reader’s understanding by progressing from very simple results to more complex analysis without skipping the key steps in the derivations. Offers a number of new topics and exercises that form essential steppingstones to the present level of research in the field. Includes exercises at the end of the chapters based on both the academic and practical experience of the authors. Vibrations and Waves in Continuous Mechanical Systems provides a first course on the vibrations of continuous systems that will be suitable for students of continuous system dynamics, at senior undergraduate and graduate levels, in mechanical, civil and aerospace engineering. It will also appeal to researchers developing theory and analysis within the field.

Download or read book Vibration Analysis and Structural Dynamics for Civil Engineers written by Alphose Zingoni and published by CRC Press. This book was released on 2018-10-08 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Appeals to the Student and the Seasoned Professional While the analysis of a civil-engineering structure typically seeks to quantify static effects (stresses and strains), there are some aspects that require considerations of vibration and dynamic behavior. Vibration Analysis and Structural Dynamics for Civil Engineers: Essentials and Group-Theoretic Formulations is relevant to instances that involve significant time-varying effects, including impact and sudden movement. It explains the basic theory to undergraduate and graduate students taking courses on vibration and dynamics, and also presents an original approach for the vibration analysis of symmetric systems, for both researchers and practicing engineers. Divided into two parts, it first covers the fundamentals of the vibration of engineering systems, and later addresses how symmetry affects vibration behavior. Part I treats the modeling of discrete single and multi-degree-of-freedom systems, as well as mathematical formulations for continuous systems, both analytical and numerical. It also features some worked examples and tutorial problems. Part II introduces the mathematical concepts of group theory and symmetry groups, and applies these to the vibration of a diverse range of problems in structural mechanics. It reveals the computational benefits of the group-theoretic approach, and sheds new insights on complex vibration phenomena. The book consists of 11 chapters with topics that include: The vibration of discrete systems or lumped parameter models The free and forced response of single degree-of-freedom systems The vibration of systems with multiple degrees of freedom The vibration of continuous systems (strings, rods and beams) The essentials of finite-element vibration modelling Symmetry considerations and an outline of group and representation theories Applications of group theory to the vibration of linear mechanical systems Applications of group theory to the vibration of structural grids and cable nets Group-theoretic finite-element and finite-difference formulations Vibration Analysis and Structural Dynamics for Civil Engineers: Essentials and Group-Theoretic Formulations acquaints students with the fundamentals of vibration theory, informs experienced structural practitioners on simple and effective techniques for vibration modelling, and provides researchers with new directions for the development of computational vibration procedures.

Download or read book Mechanical Vibrations written by Michel Geradin and published by John Wiley & Sons. This book was released on 2015-02-16 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibrations: Theory and Application to Structural Dynamics, Third Edition is a comprehensively updated new edition of the popular textbook. It presents the theory of vibrations in the context of structural analysis and covers applications in mechanical and aerospace engineering. Key features include: A systematic approach to dynamic reduction and substructuring, based on duality between mechanical and admittance concepts An introduction to experimental modal analysis and identification methods An improved, more physical presentation of wave propagation phenomena A comprehensive presentation of current practice for solving large eigenproblems, focusing on the efficient linear solution of large, sparse and possibly singular systems A deeply revised description of time integration schemes, providing framework for the rigorous accuracy/stability analysis of now widely used algorithms such as HHT and Generalized-α Solved exercises and end of chapter homework problems A companion website hosting supplementary material

Download or read book Introduction to Mechanical Vibrations written by Ronald J. Anderson and published by John Wiley & Sons. This book was released on 2020-06-08 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth introduction to the foundations of vibrations for students of mechanical engineering For students pursuing their education in Mechanical Engineering, An Introduction to Mechanical Vibrations is a definitive resource. The text extensively covers foundational knowledge in the field and uses it to lead up to and include: finite elements, the inerter, Discrete Fourier Transforms, flow-induced vibrations, and self-excited oscillations in rail vehicles. The text aims to accomplish two things in a single, introductory, semester-length, course in vibrations. The primary goal is to present the basics of vibrations in a manner that promotes understanding and interest while building a foundation of knowledge in the field. The secondary goal is to give students a good understanding of two topics that are ubiquitous in today's engineering workplace - finite element analysis (FEA) and Discrete Fourier Transforms (the DFT- most often seen in the form of the Fast Fourier Transform or FFT). FEA and FFT software tools are readily available to both students and practicing engineers and they need to be used with understanding and a degree of caution. While these two subjects fit nicely into vibrations, this book presents them in a way that emphasizes understanding of the underlying principles so that students are aware of both the power and the limitations of the methods. In addition to covering all the topics that make up an introductory knowledge of vibrations, the book includes: ● End of chapter exercises to help students review key topics and definitions ● Access to sample data files, software, and animations via a dedicated website

Download or read book Structural Dynamics written by Madhujit Mukhopadhyay and published by Springer Nature. This book was released on 2021-04-15 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the theory of structural dynamics, with focus on civil engineering structures. It presents modern methods of analysis and techniques adaptable to computer programming clearly and easily. The book is ideal as a text for advanced undergraduates or graduate students taking a first course in structural dynamics. It is arranged in such a way that it can be used for a one- or two-semester course, or span the undergraduate and graduate levels. In addition, this book serves the practicing engineer as a primary reference. This book is organized by the type of structural modeling. The author simplifies the subject by presenting a single degree-of-freedom system in the first chapters and then moves to systems with many degrees-of-freedom in the following chapters. Many worked examples/problems are presented to explain the text, and a few computer programs are presented to help better understand the concepts. The book is useful to the research scholars and professional engineers, besides senior undergraduate and postgraduate students.

Download or read book Mechanical Vibration written by Haym Benaroya and published by CRC Press. This book was released on 2017-08-29 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration: Analysis, Uncertainties, and Control, Fourth Edition addresses the principles and application of vibration theory. Equations for modeling vibrating systems are explained, and MATLAB® is referenced as an analysis tool. The Fourth Edition adds more coverage of damping, new case studies, and development of the control aspects in vibration analysis. A MATLAB appendix has also been added to help students with computational analysis. This work includes example problems and explanatory figures, biographies of renowned contributors, and access to a website providing supplementary resources.