Download or read book Engineering Design Basis for Plastics Products written by F. J. Lockett and published by . This book was released on 1982 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastics Engineered Product Design written by D.V. Rosato and published by Elsevier. This book was released on 2003-12-16 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: • A comprehensive book which collates the experience of two well-known US plastic engineers.• Enables engineers to make informed decisions.• Includes a unique chronology of the world of plastics. The use of plastics is increasing year on year, and new uses are being found for plastics in many industries. Designers using plastics need to understand the nature and properties of the materials which they are using so that the products perform to set standards. This book, written by two very experienced plastics engineers, provides copious information on the materials, fabrication processes, design considerations and plastics performance, thus allowing informed decisions to be made by engineers. It also includes a useful chronology of the world of plastics, a resource not found elsewhere.
Download or read book Plastics Product Design Engineering Handbook written by Sidney Levy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics have become increasingly important in the products used in our society, ranging from housing to packaging, transportation, business machines and especially in medicine and health products. Designing plastic parts for this wide range of uses has become a major activity for designers, architects, engineers, and others who are concerned with product development. Because plastics are unique materials with a broad range of proper ties they are adaptable to a variety of uses. The uniqueness of plastics stems from their physical characteristics which are as different from metals, glasses, and ceramics as these materials are different from each other. One major concern is the design of structures to take loads. Metals as well as the other materials are assumed to respond elastically and to recover completely their original shape after the load is removed. Based on this simple fact, extensive litera ture on applied mechanics of materials has been developed to enable designers to predict accurately the performance of structures under load. Many engineers depend on such texts as Timoshenko's Strength of Materials as a guide to the performance of structures. Using this as a guide, generations of engineers have designed economical and safe structural parts. Unfortunately, these design principles must be modified when designing with plastics since they do not respond elastically to stress and undergo permanent deformation with sus tained loading.
Download or read book Plastics Design Handbook written by Marlene G. Rosato and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a simplified and practical approach to designing with plastics that funda mentally relates to the load, temperature, time, and environment subjected to a product. It will provide the basic behaviors in what to consider when designing plastic products to meet performance and cost requirements. Important aspects are presented such as understanding the advantages of different shapes and how they influence designs. Information is concise, comprehensive, and practical. Review includes designing with plastics based on material and process behaviors. As de signing with any materials (plastic, steel, aluminum, wood, etc.) it is important to know their behaviors in order to maximize product performance-to-cost efficiency. Examples of many different designed products are reviewed. They range from toys to medical devices to cars to boats to underwater devices to containers to springs to pipes to buildings to aircraft to space craft. The reader's product to be designed can directly or indirectly be related to product design reviews in the book. Important are behaviors associated and interrelated with plastic materials (thermoplastics, thermosets, elastomers, reinforced plastics, etc.) and fabricating processes (extrusion, injec tion molding, blow molding, forming, foaming, rotational molding, etc.). They are presented so that the technical or non-technical reader can readily understand the interrelationships.
Download or read book Introduction to Plastics Engineering written by Anshuman Shrivastava and published by William Andrew. This book was released on 2018-05-15 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Plastics Engineering provides a single reference covering the basics of polymer and plastics materials, and their properties, design, processing and applications in a practical way. The book discusses materials engineering through properties formulation, combining part design and processing to produce final products. This book will be a beneficial guide to materials engineers developing new formulations, processing engineers producing those formulations, and design and product engineers seeking to understand the materials and methods for developing new applications. The book incorporates material properties, engineering, processing, design, applications and sustainable and bio based solutions. Ideal for those just entering the industry, or transitioning between sectors, this is a quick, relevant and informative reference guide to plastics engineering and processing for engineers and plastics practitioners. Provides a single unified reference covering plastics materials, properties, design, processing and applications Offers end-to-end coverage of the industry, from formulation to part design, processing, and the final product Serves as an ideal introductory book for new plastics engineers and students of plastics engineering Provides a convenient reference for more experienced practitioners
Download or read book Plastics Materials written by J A Brydson and published by Elsevier. This book was released on 1999-10-26 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seventh edition of this classic reference work once more provides a comprehensive overview of commercially available plastics materials. Bridging the gap between theory and practice, it enables scientists to understand the commercial implications of their work as well as providing technologists with a theoretical background.Since the previous edition, several new materials have been announced. Many of these materials result from metallocene catalyst technology. In addition, developments also continue with condensation polymers with several new polyester type materials of interest for bottle-blowing and/or degradable plastics. New phenolic-type resins have also been announced. As with previous editions, an explanation of the properties of these new materials in terms of their structure and morphology involving the principles laid down in the earlier chapters is presented.
Download or read book Engineering Design for Plastics written by Eric Baer and published by . This book was released on 1964 with total page 1274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastics Institute of America Plastics Engineering Manufacturing Data Handbook written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2001-11-30 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a simplified, practical, and innovative approach to understanding the design and manufacture of plastic products in the World of Plastics. The concise and comprehensive information defines and focuses on past, current, and future technical trends. The handbook reviews over 20,000 different subjects; and contains over 1,000 figures and more than 400 tables. Various plastic materials and their behavior patterns are reviewed. Examples are provided of different plastic products and relating to them critical factors that range from meeting performance requirements in different environments to reducing costs and targeting for zero defects. This book provides the reader with useful pertinent information readily available as summarized in the Table of Contents, List of References and the Index.
Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by Elsevier. This book was released on 2023-11-24 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Plastics Engineering Handbook: Processing, Sustainability, Materials, and Applications, Third Edition presents the fundamentals of plastics engineering, helping bring readers up-to-speed on new plastics, materials, processing and technology. This revised and expanded edition includes the latest developments in plastics, including areas such as biodegradable and biobased plastics, plastic waste, smart polymers, and 3D printing. Sections cover traditional plastics, elastomeric materials, bio-based materials, additives, colorants, fillers and plastics processing, including various key technologies, plastic recycling and waste. The final part of the book examines design and applications, with substantial updates made to reflect advancements in technology, regulations, and commercialization. Throughout the handbook, the focus is on engineering aspects of producing and using plastics. Properties of plastics are explained, along with techniques for testing, measuring, enhancing, and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school and experienced practitioners evaluating new technologies or getting up-to-speed in a new field. Offers an ideal reference for new engineers, experienced practitioners and researchers entering a new field or evaluating a new technology Provides an authoritative source of practical advice, presenting guidance that will lead to cost savings and process improvements Includes the latest technology, covering 3D printing, smart polymers and thorough coverage of biobased and biodegradable plastics
Download or read book Plastics Product Design written by Paul F. Mastro and published by John Wiley & Sons. This book was released on 2016-03-28 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics Product Design Provides the reader with access to lessons learned in the author’s 40 years of plastics product design experience Part 1 of the book provides the reader with an introduction to plastics as a design material and a discussion of materials commonly in use today. There is a discussion of a variety of processes available to the designer to make a part along with the design considerations each process will entail. This section also includes a discussion of useful prototyping processes, including advantages and disadvantages of each. Next, the book discusses general design considerations applicable to most plastics product designs. In Part 2 of the book the author discusses elements of design of a number of generic plastic product types based on his more than 40 years of experience of product design and development for several companies with a variety of products. This section includes discussions of structural components, gears, bearings, hinges, snap fits, packaging, pressure vessels, and optical components. This section also discusses the general considerations that apply to these applications as well as specific insights about each particular application. There is also a chapter on the most important joining techniques. Part 2 ends with a discussion of the general design process. The book concludes with 3 appendices on thermal properties of selected generic materials; properties of selected structural components; and common abbreviations for plastic materials. Audience This book is aimed at product designers and plastics application engineers who have had limited or no experience with plastics materials as well as a more experienced designer who is designing a part for a use, process or an application that they are not familiar with.
Download or read book Plastics written by Harold Belofsky and published by . This book was released on 1995-01-01 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SPI Plastics Engineering Handbook of the Society of the Plastics Industry Inc written by Michael L. Berins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1139 pages. Available in PDF, EPUB and Kindle. Book excerpt: I am pleased to present the Fifth Edition of the Plastics Engineering Handbook. Last published in 1976, this version of the standard industry reference on plastics processing incorporates the numerous revisions and additions necessitated by 14 years of activity in a dynamic industry. At that last printing, then-SPI President Ralph L. Harding, Jr. anticipated that plastics pro duction would top 26 billion pounds in 1976 (up from 1.25 billion in 1947, when the First Edition of this book was issued). As I write, plastics production in the United States had reached almost 60 billion pounds annually. Indeed, the story of the U.S. plastics industry always has been one of phenomenal growth and unparalleled innovation. While these factors make compilation of a book such as this difficult, they also make it necessary. Thus I acknowledge all those who worked to gather and relate the information included in this 1991 edition and thank them for the effort it took to make the Plastics Engineering Handbook a definitive source and invaluable tool for our industry. Larry L. Thomas President The Society of the Plastics Industry, Inc.
Download or read book Plastics Product Design written by Paul F. Mastro and published by John Wiley & Sons. This book was released on 2016-03-04 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed at designers who have had limited or no experience with plastics materials as well as a more experienced designer who is designing a part for a use, process or an application that they are not familiar with. The reader is provided with an introduction to plastics as a design material and a discussion of materials commonly in use today. There is a discussion of a variety of processes available to the designer to make a part along with the design considerations each process will entail. This section also includes a discussion of useful prototyping processes, including advantages and disadvantages of each. Next, the book will discuss general design considerations applicable to most plastics product designs. In section 2 of the book the author will discuss elements of design of a number of generic plastic product types based on his 40+ years of experience of product design and development for a several companies with a variety of products. This section will include discussions of structural components, gears, bearings, hinges, snap fits, packaging, pressure vessels, and optical components. This section will discuss the general considerations that apply to these applications as well as specific incites about each particular application. The book concludes with a discussion of the general design process.
Download or read book Designing Successful Products with Plastics written by Mark T. MacLean-Blevins and published by William Andrew. This book was released on 2017-08-28 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing Successful Products with Plastics: Fundamentals of Plastic Part Design provides expert insight into design considerations required to bring a concept product or part through design and ready-for-production. The book shows how integrating four key choices—materials, processes, tooling and design—in every design decision allows the designer to fully vet and optimize the design. Rather than focusing on design rules and engineering equations used during product development, the emphasis of the book is on what the designer needs to consider during the early conceptual visualization stages, and in the detailed stages of the design process. This approach will bridge the gap between the industrial designer, tasked with the ‘big picture’ product design and use, and the part designer, tasked with the detailed plastic part design for manufacture. Useful to both experienced and novice designers, this book brings valuable design process information through specific examples, enabling designers and engineers in the plastics industry to effectively use the available technical information to successfully design and manufacture new products. Bridges the gap between the industrial designer working on product design and use, and the part designer working on detailed part design for manufacture Enables designers to establish a solid foundation for new product development on the ‘four pillars’ of the process: materials, processes, tooling, and design Provides a hierarchy and roadmap through creative product design and implementation, so engineers can translate a product from creative concept through to realization and commercialization
Download or read book Industrial Design of Plastics Products written by Gordon and published by . This book was released on 2003-02-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Designing with Plastics and Composites A Handbook written by Donald Rosato and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: For some time there has been a strong need in the plastic and related industries for a detailed, practical book on designing with plastics and composites (reinforced plastics). This one-source book meets this criterion by clearly explaining all aspects of designing with plastics, as can be seen from the Table of Contents and Index. It provides information on what is ahead as well as today's technology. It explains how to interrelate the process of meeting design performance requirements with that of selecting the proper plastic and manufacturing process to make a product at the lowest cost. This book has been prepared with an awareness that its usefulness will depend greatly upon its simplicity. The overall guiding premise has therefore been to provide all essential information. Each chapter is organized to best present a methodology for designing with plastics and composites. of industrial designers, whether in engineering This book will prove useful to all types or involved in products, molds, dies or equipment, and to people in new-product ventures, research and development, marketing, purchasing, and management who are involved with such different products as appliances, the building industry, autos, boats, electronics, furniture, medical, recreation, space vehicles, and others. In this handbook the basic essentials of the properties and processing behaviors of plastics are presented in a single source intended to be one the user will want to keep within easy reach.
Download or read book Design and Manufacturing of Plastics Products written by Antonio Pouzada and published by William Andrew. This book was released on 2021-08-14 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Manufacturing of Plastics Products: Integrating Conventional Methods and Innovative Technologies brings together detailed information on design, materials selection, properties, manufacturing, and the performance of plastic products, incorporating the utilization of the latest novel techniques and additive manufacturing technologies. The book integrates the design of molded products and conventional manufacturing and molding techniques with recent additive manufacturing techniques to produce performant products and cost-effective tools. Key areas of innovation are explained in detail, including hybrid molds, the integration of processing options with product properties and performance, and sustainability factors such as eco-design strategies, recycling, and lifecycle assessment. Other sections cover the development of plastics products, including design methodologies, design solutions specific to plastics, and design for re-use, as well as manufacturing and performance, with an emphasis on thermoplastic molding techniques, recent advances on plastics tooling, and the appraisal of the influence of processing options on product performance. This is a valuable resource to plastics engineers, design engineers, mold makers, and product or part designers across industries. It will also be of interest to researchers and advanced students in plastics engineering, polymer science, additive manufacturing and mechanical engineering. Offers a thorough grounding in plastics part design, thermoplastic material selection, properties, manufacture and performance of plastic parts Presents the latest advances, including the integration of additive manufacturing in the plastics product development cycle, hybrid molds, and lifecycle and recycling considerations Enables the reader to utilize traditional methods alongside cutting-edge technologies in the production of performant plastic products and parts