Download or read book Failure Analysis in Engineering Applications written by Shin-Ichi Nishida and published by Elsevier. This book was released on 2014-05-15 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure Analysis in Engineering Applications deals with equipment and machine design together with examples of failures and countermeasures to avoid such failures. This book analyzes failures in facilities or structures and the ways to prevent them from happening in the future. The author describes conventional terms associated with failure or states of failure including the strength of materials, as well as the procedure in failure analysis (materials used, design stress, service conditions, simulation, examination of results). The author also describes the mechanism of fatigue failure and prediction methods to estimate the remaining life of affected structures. The author cites some precautions to be followed in actual failure analysis such as detailed observation on the fracture site, removal of surface deposits (for example, rusts) without altering the fracture size or shape, The book gives examples of analysis of failure involving a crane head sheave hanger, wire rope, transmission shaft, environmental failure of fastening screws, and failures in rail joints. This book is intended for civil and industrial engineers, for technical designers or engineers involved in the maintenance of equipment, machineries, and structures.
Download or read book Linear Elastic Fracture Mechanics for Engineers Theory and Applications written by L.P. Pook and published by WIT Press. This book was released on 2000-01-24 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book fulfills the need for a short, modern, introductory text on linear elastic fracture mechanics and its engineering applications. Suitable for use by engineering undergraduates, and other newcomers to the subject, it:- • Explains the main ideas underlying present day linear elastic fracture mechanics and how these have been developed. • Shows how the ideas can be used to carry out calculations answering the question 'Does this crack matter?' from the viewpoint of an engineering designer. • Provides an understanding of the basis of standard methods and software employed to carry out calculations. • Includes additional, more advanced material, where this will increase understanding of the sometimes formidable mathematics involved, and of the various simplifications and approximations used in practical applications. The author includes all the material central to an undergraduate introductory course and ends each chapter with an overview of the material covered to aid accessibility. Familiarity with the mechanical properties of metallic materials, and with the linear elastic stress analysis of uncracked bodies is assumed.
Download or read book Engineering Applications of Fracture Analysis written by G. G. Garrett and published by Elsevier. This book was released on 2014-05-23 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Applications of Fracture Analysis is a record of the proceedings of the First National Conference on Fracture, held at Johannesburg, South Africa in November 1979. The papers presented in the conference provide a general picture of fracture studies in South Africa. The contributions cover the theoretical analyses of the influence of dislocation stresses in initiating fracture; practical design of steel components exposed to high-temperature environments; problems encountered in South African industry, such as rock drilling equipment failures, unwanted rock fractures in mines and safety problems in nuclear reactors; fracture study techniques; and formal applications of fracture mechanics. The book will be of interest to metallurgists, engineers, and materials specialists.
Download or read book Fracture and Fatigue Control in Structures written by Stanley Theodore Rolfe and published by ASTM International. This book was released on 1977 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizes applications of fracture mechanics to prevent fracture and fatigue failures in structures, rather than the theoretical aspects of fracture mechanics. The concepts of driving force and resistance force are used to differentiate between the mathematical side and the materials side. Case studies of actual failures are new to the third edition. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Fracture Mechanics Criteria and Applications written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is difficult to do justice to fracture mechanics in a textbook, for the subject encompasses so many disciplines. A general survey of the field would serve no purpose other than give a collection of references. The present book by Professor E. E. Gdoutos is refreshing because it does not fall into the esoteric tradition of outlining equations and results. Basic ideas and underlying principles are clearly explained as to how they are used in application. The presentations are concise and each topic can be understood by advanced undergraduates in material science and continuum mechanics. The book is highly recommended not only as a text in fracture mechanics but also as a reference to those interested in the general aspects of failure analysis. In addition to providing an in-depth review of the analytical methods for evaluating the fundamental quantities used in linear elastic fracture mechanics, various criteria are discussed re:O. ecting their limitations and applications. Par ticular emphases are given to predicting crack initiation, subcritical growth and the onset of rapid fracture from a single criterion. Those models in which it is assumed that the crack extends from tip to tip rely on the specific surface energy concept. The differences in the global and energy states before and after crack extension were associated with the energy required to create a unit area of crack surface. Applications were limited by the requirement of self-similar crack growth.
Download or read book Mechanics of Fracture Initiation and Propagation written by George C. Sih and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: The assessment of crack initiation and/or propagation has been the subject of many past discussions on fracture mechanics. Depending on how the chosen failure criterion is combined with the solution of a particular theory of continuum mechanics, the outcome could vary over a wide range. Mod elling of the material damage process could be elusive if the scale level of observation is left undefined. The specification of physical dimension alone is not sufficient because time and temperature also play an intimate role. It is only when the latter two variables are fixed that failure predictions can be simplified. The sudden fracture of material with a pre-existing crack is a case in point. Barring changes in the local temperature,* the energy released to create a unit surface area of an existing crack can be obtained by considering the change in elastic energy of the system before and after crack extension. Such a quantity has been referred to as the critical energy release rate, G e, or stress intensity factor, K Ie. Other parameters, such as the crack opening displacement (COD), path-independent J-integral, etc. , have been proposed; their relation to the fracture process is also based on the energy release concept. These one-parameter approaches, however, are unable simultaneously to account for the failure process of crack initiation, propagation and onset of rapid fracture. A review on the use of G, K I, COD, J, etc. , has been made by Sih [1,2].
Download or read book Elementary engineering fracture mechanics written by D. Broek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: When asked to start teaching a course on engineering fracture mechanics, I realized that a concise textbook, giving a general oversight of the field, did not exist. The explanation is undoubtedly that the subject is still in a stage of early development, and that the methodologies have still a very limited applicability. It is not possible to give rules for general application of fracture mechanics concepts. Yet our comprehension of cracking and fracture beha viour of materials and structures is steadily increasing. Further developments may be expected in the not too distant future, enabling useful prediction of fracture safety and fracture characteristics on the basis of advanced fracture mechanics procedures. The user of such advanced procedures m\lst have a general understanding of the elementary concepts, which are provided by this volume. Emphasis was placed on the practical application of fracture mechanics, but it was aimed to treat the subject in a way that may interest both metallurgists and engineers. For the latter, some general knowledge of fracture mechanisms and fracture criteria is indispensable for an apprecia tion of the limita tions of fracture mechanics. Therefore a general discussion is provided on fracture mechanisms, fracture criteria, and other metal lurgical aspects, without going into much detail. Numerous references are provided to enable a more detailed study of these subjects which are still in a stage of speculative treatment.
Download or read book Engineering Applications of Fracture Analysis written by G. G. Garrett and published by . This book was released on 1980 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Practical Approach to Fracture Mechanics written by Jorge Luis González-Velázquez and published by Elsevier. This book was released on 2020-10-08 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Approach to Fracture Mechanics provides a concise overview on the fundamental concepts of fracture mechanics, discussing linear elastic fracture mechanics, fracture toughness, ductile fracture, slow crack propagation, structural integrity, and more. The book outlines analytical and experimental methods for determining the fracture resistance of mechanical and structural components, also demonstrating the use of fracture mechanics in failure analysis, reinforcement of cracked structures, and remaining life estimation. The characteristics of crack propagation induced by fatigue, stress-corrosion, creep, and absorbed hydrogen are also discussed. The book concludes with a chapter on the structural integrity analysis of cracked components alongside a real integrity assessment. This book will be especially useful for students in mechanical, civil, industrial, metallurgical, aeronautical and chemical engineering, and for professional engineers looking for a refresher on core principles. Concisely outlines the underlying fundamentals of fracture mechanics, making physical concepts clear and simple and providing easily-understood applied examples Includes solved problems of the most common calculations, along with step-by-step procedures to perform widely-used methods in fracture mechanics Demonstrates how to determine stress intensity factors and fracture toughness, estimate crack growth rate, calculate failure load, and other methods and techniques
Download or read book Fracture and Fatigue Control in Structures written by John M. Barsom and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation An introduction for practicing engineers or students at the beginning graduate or advanced undergraduate level, emphasizing the application of fracture mechanics to preventing fracture and fatigue failures in structures, rather than the theoretical aspects of the field. The topics include stress analysis for members with cracks, resistance forces, fatigue crack initiation, and fitness for service. Among the case studies are bridges, oil tankers, and steel casings. The earlier editions were in 1977 and 1987. Annotation copyrighted by Book News, Inc., Portland, OR.
Download or read book Damage and Fracture Mechanics written by Taoufik Boukharouba and published by Springer Science & Business Media. This book was released on 2009-08-09 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First African InterQuadrennial ICF Conference “AIQ-ICF2008” on Damage and Fracture Mechanics – Failure Analysis of Engineering Materials and Structures”, Algiers, Algeria, June 1–5, 2008 is the first in the series of InterQuadrennial Conferences on Fracture to be held in the continent of Africa. During the conference, African researchers have shown that they merit a strong reputation in international circles and continue to make substantial contributions to the field of fracture mechanics. As in most countries, the research effort in Africa is und- taken at the industrial, academic, private sector and governmental levels, and covers the whole spectrum of fracture and fatigue. The AIQ-ICF2008 has brought together researchers and engineers to review and discuss advances in the development of methods and approaches on Damage and Fracture Mechanics. By bringing together the leading international experts in the field, AIQ-ICF promotes technology transfer and provides a forum for industry and researchers of the host nation to present their accomplishments and to develop new ideas at the highest level. International Conferences have an important role to play in the technology transfer process, especially in terms of the relationships to be established between the participants and the informal exchange of ideas that this ICF offers.
Download or read book Fracture Mechanics written by Chin-Teh Sun and published by Academic Press. This book was released on 2011-10-14 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: From a leading expert in fracture mechanics, this text provides new approaches and new applications to advance the understanding of crack formation and propagation.
Download or read book The Practical Use of Fracture Mechanics written by D. Broek and published by Springer. This book was released on 1988-10-31 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about the use of fracture mechanics for the solution of practical problems; academic rigor is not at issue and dealt with only in as far as it improves insight and understanding; it often concerns secondary errors in engineering. Knowledge of (ignorance of) such basic input as loads and stresses in practical cases may cause errors far overshadowing those introduced by shortcomings of fracture mechanics and necessary approximations; this is amply demonstrated in the text. I have presented more than three dozen 40-hour courses on fracture mechanics and damage tolerance analysis, so that I have probably more experience in teaching the subject than anyone else. I learned more than the students, and became cognizant of difficulties and of the real concerns in applications. In particular I found, how a subject should be explained to appeal to the practicing engineer to demonstrate that his practical problem can indeed be solved with engineering methods. This experience is reflected in the presenta tions in this book. Sufficient background is provided for an understanding of the issues, but pragamatism prevails. Mathematics cannot be avoided, but they are presented in a way that appeals to insight and intuition, in lieu of formal derivations which would show but the mathematical skill of the writer.
Download or read book The Practical Use of Fracture Mechanics written by D. Broek and published by Springer Science & Business Media. This book was released on 1989-07-31 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about the use of fracture mechanics for the solution of practical problems; academic rigor is not at issue and dealt with only in as far as it improves insight and understanding; it often concerns secondary errors in engineering. Knowledge of (ignorance of) such basic input as loads and stresses in practical cases may cause errors far overshadowing those introduced by shortcomings of fracture mechanics and necessary approximations; this is amply demonstrated in the text. I have presented more than three dozen 40-hour courses on fracture mechanics and damage tolerance analysis, so that I have probably more experience in teaching the subject than anyone else. I learned more than the students, and became cognizant of difficulties and of the real concerns in applications. In particular I found, how a subject should be explained to appeal to the practicing engineer to demonstrate that his practical problem can indeed be solved with engineering methods. This experience is reflected in the presenta tions in this book. Sufficient background is provided for an understanding of the issues, but pragamatism prevails. Mathematics cannot be avoided, but they are presented in a way that appeals to insight and intuition, in lieu of formal derivations which would show but the mathematical skill of the writer.
Download or read book Fracture Mechanics Applications and Challenges written by M. Fuentes and published by Elsevier. This book was released on 2000-09-13 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 15 fully peer-reviewed Invited Papers which were presented at the 13th Biennial European Conference on Fracture and is a companion to the CD-ROM http://www.elsevier.com/locate/isbn/008043701xProceedings. The organisers of the ECF 13 opted from the very beginning for an application-orientated conference, and consequently, this book contributes to the understanding of fracture phenomena, and disseminates fracture concepts and their application to the solution of engineering problems to practitioners in a wide range of fields. The fields covered in this book can be broadly classified into: elastic-plastic fracture mechanics, fracture dynamics, fatigue and interactive processes, failure, structural integrity, coatings and materials, with applications to the following industrial sectors: transport, aerospace engineering, civil engineering, pipelines and automotive engineering.
Download or read book Fracture Mechanics Applications written by Hayri Baytan Ozmen and published by BoD – Books on Demand. This book was released on 2020-09-23 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture mechanics deals with the cracking behavior of materials, and cracking defines the limit state for many components of engineering systems. Fracture mechanics principles can help us design more robust components to ensure safer airplanes, space shuttles, ships, cranes, buildings, bridges, and mechanical systems. Written by researchers and experts of the field, this book examines recent progress in fracture mechanics applications. Chapters cover such topics as rupture theory, the J-integral, knitted fabric-reinforced polymer composites, and artificial neural networks to detect structural damage, among others. This volume is designed for graduate students, researchers, and practicing engineers.
Download or read book Nonlinear Fracture Mechanics for Engineers written by Ashok Saxena and published by CRC Press. This book was released on 1998-03-31 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture mechanics is an essential tool for engineers in a number of different engineering disciplines. For example, an engineer in a metals- or plastics-dependent industry might use fracture mechanics to evaluate and characterize materials, while another in aerospace or construction might use fracture mechanics-based methods for product design and service life-time estimation. This balanced treatment, which covers both applied engineering and mathematical aspects of the topic, provides a much-needed multidisciplinary treatment of the field suitable for the many diverse applications of the subject. While texts on linear elastic fracture mechanics abound, no complete treatments of the complex topic of nonlinear fracture mechanics have been available in a textbook format - until now. Written by an author with extensive industry credentials as well as academic experience, Nonlinear Fracture Mechanics for Engineers examines nonlinear fracture mechanics and its applications in mechanics, materials testing, and life prediction of components. The book includes the first-ever complete examination of creep and creep-fatigue crack growth. Examples and problems reinforce the concepts presented. A complete chapter on applications and case studies involving nonlinear fracture mechanics completes this thorough evaluation of this dynamic field of study.
