Download or read book Structural Adhesive Joints in Engineering written by R. D. Adams and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intention of this book is that it should contain everything an engineer needs to know to be able to design and produce adhesively bonded joints which are required to carry significant loads. The advan tages and disadvantages of bonding are given, together with a sufficient understanding of the necessary mechanics and chemistry to enable the designer to make a sound engineering judgement in any particular case. The stresses in joints are discussed extensively so that the engineer can get sufficient philosophy or feel for them, or can delve more deeply into the mathematics to obtain quantitative solutions even with elasto plastic behaviour. A critical description is given of standard methods of testing adhesives, both destructively and non-destructively. The essen tial chemistry of adhesives and the importance of surface preparation are described and guidance is given for adhesive selection by me ans of check lists. For many applications, there will not be a unique adhesive which alone is suitable, and factors such as cost, convenience, produc tion considerations or familiarity may be decisive. A list of applications is given as examples. The authors wish to increase the confidence of engineers using adhesive bonding in load-bearing applications by the information and experience presented. With increasing experience of adhesives en gineering, design will become more elegant as weH as more fitted to its products.
Download or read book Update on Engineering and Structural Adhesives written by David Dunn and published by Smithers Rapra. This book was released on 2010-09-17 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering and structural adhesives are distinguished from other adhesives by being high strength materials that are designed to support static or dynamic loads, often substantial loads. These adhesives are often subjected to cycling high and low temperatures and aggressive fluids or the weather. In general they are used for the bonding of rigid structures, although some degree of flexibility or toughness is often desirable in the adhesives to counter the effects of movement, impact or vibration. Although traditionally used in the metal working industries, these adhesives are now even more widely used with more modern materials. This Update describes the most important adhesives for engineering applications, viz.: Anaerobics Epoxies Reactive acrylics Ultraviolet light cured (UV) adhesives Polyurethanes Reactive hot melt polyurethanes Special formulations of cyanoacrylatesIt covers the basic chemistry, applications, advances in technology, and durability testing of these adhesives. Important breakthrough technologies are highlighted such as the use of organoboranes as initiators for the bonding of low surface energy plastics and the use of nano technology to improve properties. Key papers and patents are cited which represent some of the key developments in the subject.
Download or read book Advances in Structural Adhesive Bonding written by David A. Dillard and published by Elsevier. This book was released on 2010-03-31 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesive bonding is often effective, efficient, and often necessary way to join mechanical structures. This important book reviews the most recent improvements in adhesive bonding and their wide-ranging potential in structural engineering. Part one reviews advances in the most commonly used groups of structural adhesives with chapters covering topics such as epoxy, polyurethane, silicone, cyanoacrylate, and acrylic adhesives. The second set of chapters covers the various types of adherends and pre-treatment methods for a range of structural materials such as metals, composites and plastics. Chapters in Part three analyse methods and techniques with topics on joint design, life prediction, fracture mechanics and testing. The final group of chapters gives useful and practical insights into the problems and solutions of adhesive bonding in a variety of hostile environments such as chemical, wet and extreme temperatures. With its distinguished editor and international team of contributors, Advances in structural adhesive bonding is a standard reference for structural and chemical engineers in industry and the academic sector. Reviews advances in the most commonly used groups of structural adhesives including epoxy, silicone and acrylic adhesives Examines key issues in adhesive selection featuring substrate compatibility and manufacturing demands Documents advances in bonding metals, plastics and composites recognising problems and limitations
Download or read book Structural Adhesive Joints written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2020-07-21 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most structures are comprised of a number of individual parts or components which have to be connected to form a system with integral load transmission path. The structural adhesive bonding represents one of the most enabling technologies to fabricate most complex structural configurations involving advanced materials (e.g. composites) for load-bearing applications. Quite recently there has been a lot of activity in harnessing nanotechnology (use of nanomaterials) in ameliorating the existing or devising better performing structural adhesives. The 10 chapters by subject matter experts look at the following issues: Surface preparation for structural adhesive joints (SAJ) Use of nanoparticles in enhancing performance of SAJ Optimization of SAJ Durability aspects of SAJ Debonding of SAJ Fracture mechanics of SAJ Failure analysis of SAJ Damage behavior in functionally graded SAJ Impact, shock and vibration characteristics of composites for SAJ Delamination arrest methods in SAJ
Download or read book Engineering and Structural Adhesives written by D. J. Dunn and published by iSmithers Rapra Publishing. This book was released on 2004 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This review discusses the types of engineering adhesives in use, properties, advantages and disadvantages, and applications. It is very clearly written, well referenced and provides an excellent overview of a rapidly developing field. The author is an expert with many years of experience in adhesive research and development. The review is accompanied by around 400 abstracts from papers and books in the Polymer Library, to facilitate further reading on this subject.
Download or read book Structural Adhesive Joints in Engineering written by Robert Adams and published by Springer. This book was released on 2011-11-12 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intention of this book is that it should contain everything an engineer needs to know to be able to design and produce adhesively bonded joints which are required to carry significant loads. The advan tages and disadvantages of bonding are given, together with a sufficient understanding of the necessary mechanics and chemistry to enable the designer to make a sound engineering judgement in any particular case. The stresses in joints are discussed extensively so that the engineer can get sufficient philosophy or feel for them, or can delve more deeply into the mathematics to obtain quantitative solutions even with elasto plastic behaviour. A critical description is given of standard methods of testing adhesives, both destructively and non-destructively. The essen tial chemistry of adhesives and the importance of surface preparation are described and guidance is given for adhesive selection by me ans of check lists. For many applications, there will not be a unique adhesive which alone is suitable, and factors such as cost, convenience, produc tion considerations or familiarity may be decisive. A list of applications is given as examples. The authors wish to increase the confidence of engineers using adhesive bonding in load-bearing applications by the information and experience presented. With increasing experience of adhesives en gineering, design will become more elegant as weH as more fitted to its products.
Download or read book Update on Engineering and Structural Adhesives written by David J. Dunn and published by . This book was released on 2010 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering and structural adhesives are distinguished from other adhesives by being high strength materials that are designed to support static or dynamic loads, often substantial loads. These adhesives are often subjected to cycling high and low temperatures and aggressive fluids or the weather. In general they are used for the bonding of rigid structures, although some degree of flexibility or toughness is often desirable in the adhesives to counter the effects of movement, impact or vibration. Although traditionally used in the metal working industries, these adhesives are now even more widely used with more modern materials. This Update describes the most important adhesives for engineering applications, including: Anaerobics; Epoxies; Reactive acrylics; Ultraviolet light cured (UV) adhesives; Polyurethanes; Reactive hot melt polyurethanes; and Special formulations of cyanoacrylates. It covers the basic chemistry, applications, advances in technology, and durability testing of these adhesives. Important breakthrough technologies are highlighted such as the use of organoboranes as initiators for the bonding of low surface energy plastics and the use of nano technology to improve properties. Key papers and patents are cited which represent some of the key developments in the subject.
Download or read book Structural Adhesive Joints written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2020-09-01 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely book on structural adhesives joints showcases all the pertinent topics and will be of immense value to scientists and engineers in many industries. Most structures are comprised of a number of individual parts or components which have to be connected to form a system with integral load transmission path. The structural adhesive bonding represents one of the most enabling technologies to fabricate most complex structural configurations involving advanced materials (e.g. composites) for load-bearing applications. Quite recently there has been a lot of activity in harnessing nanotechnology (use of nanomaterials) in ameliorating the existing or devising better performing structural adhesives. The 10 chapters by subject matter experts look at the following issues: Surface preparation for structural adhesive joints (SAJ) Use of nanoparticles in enhancing performance of SAJ Optimization of SAJ Durability aspects of SAJ Debonding of SAJ Fracture mechanics of SAJ Failure analysis of SAJ Damage behavior in functionally graded SAJ Impact, shock and vibration characteristics of composites for SAJ Delamination arrest methods in SAJ
Download or read book Adhesives in Engineering Design written by W.A. Lees and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: The possible use of adhesives in a new design should always be considered because of the economic and technical benefits thatthey can confer. Light, stiff and economic structures, free of the blemishes caused by conventional assembly methods, can be fabricated from a variety of materials in combinations which would otherwise be hard to achieve. Similarly, mechanisms may be built up using bonding techniques which are free of the costs and stresses implicit in press fitting. Adhesives are not a panacea, but they do have a great deal to offer as is shown by the vital role they play in modern production engineering. Yet, despite this, they are not generally regarded with enthusiasm by engineers and designers. The reason for this is not hard to find. There are so many adhesives with such diverse properties that, in the absence of a unifying science which can explain not only why adhesives stick but why they behave as they do, a very strong incentive is required to guarantee perseverance. In addition, although the polymeric structures of adhesives are well understood, this knowledge is usually of little help to the engineer who is used to dealing in precise terms and may be readily put off by a subject which he tends to regard as being arcane and wooly.
Download or read book Structural Adhesives written by S.R. Hartshorn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesives in general and structural adhesives in particular are the subjects of much academic interest as well as commercial importance. Structural bonding, as a method of joining, offers a number of advantages over mechanical fastening. However, in order to achieve satisfactory results, the proper adhesive must be selected and the appropriate bonding procedures followed. The purpose of Structural Adhesives: Chemistry and Technology is to review the major classes of structural adhesives and the principles of adhesion and bonding as these relate to structural joints. Each chapter provides an overview of the topic under discussion with a list of references to the relevant literature. In addition to describing the chemistry involved, other aspects of structural adhesive technology are covered, such as formula tion, testing, and end uses. Some structural adhesives, especially epoxies and phenolics, have a long history of successful use and are now widely employed. Others, such as the structural acrylics and cyanoacrylates, are beginning to gain industrial acceptance. Urethanes and anaerobics have limited but important uses, while high-temperature adhesives are still largely in the research and development stage.
Download or read book Structural Adhesive Joints in Engineering written by R. D. Adams and published by . This book was released on 1986 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adhesives in Civil Engineering written by Geoffrey Mays and published by Cambridge University Press. This book was released on 1992-06-26 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete and clear introduction to the use of adhesives to form load-bearing joints in bridges, civil engineering and building structures.
Download or read book Structural Adhesive Joints in Engineering written by Robert D.. Adams and published by . This book was released on 1986 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adhesion Science and Engineering written by and published by Elsevier. This book was released on 2002-11-14 with total page 2014 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Mechanics of Adhesion shows that adhesion science and technology is inherently an interdisciplinary field, requiring fundamental understanding of mechanics, surfaces, and materials. This volume comprises 19 chapters. Starting with a background and introduction to stress transfer principles; fracture mechanics and singularities; and an energy approach to debonding, the volume continues with analysis of structural lap and butt joint configurations. It then continues with discussions of test methods for strength and constitutive properties; fracture; peel; coatings, the case of adhesion to a single substrate; elastomeric adhesives such as sealants. The role of mechanics in determining the locus of failure in bonded joints is discussed, followed by a chapter on rheology relevant to adhesives and sealants. Pressure sensitive adhesive performance; the principles of tack and tack measurements; and contact mechanics relevant to wetting and surface energy measurements are then covered. The volume concludes with sections on fibermatrix bonding and reinforcement; durability considerations for adhesive bonds; ultrasonic non-destructive evaluation of adhesive bonds; and design of adhesive bonds from a strength perspective. This book will be of interest to practitioners in the fields of engineering and to those with an interest in adhesion science.
Download or read book Structural Adhesives written by R.J. Hussey and published by Springer Science & Business Media. This book was released on 1996-04-30 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: A worldwide directory of commercially available adhesive products for use in a wide range of engineering disciplines. Along with product names and suppliers, basic property data are tabulated and cross-referenced. The book is subdivided according to class of adhesive, with introductions to each class followed by comparison tables and datasheets for each adhesive. The datasheets contain detailed information, from product codes to environmental properties and are therefore of interest across a broad readership. Standardized data will aid the user in cross-comparison between different manufacturers and in easily identifying the required information.
Download or read book Industrial Applications of Adhesive Bonding written by J.H. Sadek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, considerable research effort has been devoted to the fabrication of structures by adhesive bonding due to its definite advantages compared with other conventional techniques such as casting and welding. With bonding the need for stress relieving is avoided, the lead time is reduced and the design can be carried out according to optimum principles with the ability to bond different materials: for example, aluminium to steel, plastics to metals. These advantages have led to continuous efforts in studying the mechanism of bonding, in improving the properties of structural of adhesive bonding in technically adhesives and in widening the use demanding industrial applications. The aim of this book is to present recent developments in the use of adhesive bonding in structural fabrication throughout the world, as illustrations to successful appli cation of this novel technique of fabrication. For industrial applications to be successful, the engineer should be aware ofthe various types of adhesives available and of their properties, and also of the new design philosophy to be adopted in such bonded structures, and a portion of the book is aimed at highlighting the properties of the adhesives and their suitability and at assisting the engineer in his choice of the proper adhesive for the job at hand. Also emphasised in this book are the various means of destructive and non-destructive testing of bonded joints, with special mention of structures fabricated by adhesive bonding.
Download or read book Structural Adhesives written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2023-03-23 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Adhesives Uniquely provides up-to-date and comprehensive information on the topic in an easily-accessible form. A structural adhesive can be described as a high-strength adhesive material that is isotropic in nature and bonds two or more parts together in a load-bearing structure. A structural adhesive material must be capable of transmitting the stress/load without loss of structural integrity within design limits. There are many types of established structural adhesives, including epoxy, urethane, acrylic, silicone, etc. Structural Adhesives comprises nine chapters and is divided into two parts: Part 1, Preparation, Properties, and Characterization; Part 2, Applications. The topics covered include: structural epoxy adhesives; biological reinforcement of epoxies as structural adhesives; marble dust reinforced epoxy structural adhesive composites; characterization of various structural adhesive materials; effects of shear and peel stress distributions on the behavior of structural adhesives; the inelastic response of structural aerospace adhesives; structural reactive acrylic adhesives: their preparation, characterization, properties, and applications; application of structural adhesives in composite connections; and naval applications of structural adhesives. Audience This book should be of much use and interest to adhesionists, materials scientists, adhesive technologists, polymer scientists, and those working in the construction, railway, automotive, aviation, bridge, and shipbuilding industries.
