Download or read book Hydraulic Engineering of Dams written by Willi H. Hager and published by CRC Press. This book was released on 2020-11-05 with total page 1081 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic engineering of dams and their appurtenant structures counts among the essential tasks to successfully design safe water-retaining reservoirs for hydroelectric power generation, flood retention, and irrigation and water supply demands. In view of climate change, especially dams and reservoirs, among other water infrastructure, will and have to play an even more important role than in the past as part of necessary mitigation and adaptation measures to satisfy vital needs in water supply, renewable energy and food worldwide as expressed in the Sustainable Development Goals of the United Nations. This book deals with the major hydraulic aspects of dam engineering considering recent developments in research and construction, namely overflow, conveyance and dissipations structures of spillways, river diversion facilities during construction, bottom and low-level outlets as well as intake structures. Furthermore, the book covers reservoir sedimentation, impulse waves and dambreak waves, which are relevant topics in view of sustainable and safe operation of reservoirs. The book is richly illustrated with photographs, highlighting the various appurtenant structures of dams addressed in the book chapters, as well as figures and diagrams showing important relations among the governing parameters of a certain phenomenon. An extensive literature review along with an updated bibliography complete this book.
Download or read book Cellular Cofferdams written by Pile Buck and published by Lulu.com. This book was released on 2012-09-28 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This working manual covers everything from theory, practical design, templates, installation, filling, equipment, maintenance to removal. With the combination of the TVA Technical Monograph 75-Steel Sheet Pile Cofferdams on the Rock manual and the US Corps of Engineers manual - Theoretical Manual for Design of Cellular Sheet Pile Structures our Cellular Cofferdams handbook make for an excellent reference book. Cellular Cofferdams, the large, barrel-like, interconnected structures formed of steel sheet piling and filled with coarse soil. Generally utilized for dewatering large construction sites as well as building piers, quaywalls, bulkheads, breakwaters and artificial islands. Over the years, a few papers on design theory have come forth, but only one complete publication devoted to the entire subject.
Download or read book The History of Large Federal Dams written by David P. Billington and published by Government Printing Office. This book was released on 2005-10 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores the story of Federal contributions to dam planning, design, and construction.
Download or read book Engineering and Design Structural Deformation Surveying Engineer Manual Em 1110 2 1009 written by and published by . This book was released on 2002-06-01 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides technical guidance for performing precise structural deformation surveys of locks, dams, and other hydraulic flood control or navigation structures. Accuracy, procedural, and quality control standards are defined for monitoring displacements in hydraulic structures.
Download or read book Rock Foundations written by United States. Army. Corps of Engineers and published by . This book was released on 1994 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering and Design written by Us Army Corps Of Engineers and published by Military Bookshop. This book was released on 1995-06 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides guidance on evaluating the condition of the concrete in a structure, relating the condition of the concrete to the underlying cause or causes of that condition, selecting an appropriate repair material and method for any deficiency found, and using the selected materials and methods to repair or rehabilitate the structure. Guidance is also included on maintenance of concrete and on preparation of concrete investigation reports for repair and rehabilitation projects. Considerations for certain specialized types of rehabilitation projects are also given.
Download or read book Upper Mississippi River Navigation Charts written by United States. Army. Corps of Engineers. Rock Island District and published by . This book was released on 1989 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Earth and Rock Fill Dams written by U. S. Army Corps of Engineers and published by . This book was released on 2004-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual presents fundamental principles underlying the design and construction of earth and rock-fill dams. The general principles presented herein are also applicable to the design and construction of earth levees.
Download or read book Strength Design for Reinforced concrete Hydraulic Structures written by American Society of Civil Engineers and published by . This book was released on 1993 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strength Design for Reinforced-Concrete Hydraulic Structures is written in sufficient detail to not only provide the designer with design procedures, but also to present examples of their application. A review of general detailing requirements, as well as strength and serviceability requirements, create a strong understanding of the strength-design method. Latter chapters feature examples that demonstrate load-factor application, the design of members subjected to combined flexural and axial loads, the design of members subjected to biaxial bending, and the design for shear strength, including provisions for both special straight and curved members.
Download or read book Hydraulic Design Criteria written by and published by . This book was released on 1977 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Small Dams written by United States. Bureau of Reclamation and published by . This book was released on 1973 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book National Water Resources Challenges Facing the U S Army Corps of Engineers written by National Research Council and published by National Academies Press. This book was released on 2011-11-04 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Army Corps of Engineers (Corps) is responsible for construction, operations, and maintenance of much of the nation's water resources infrastructure. This infrastructure includes flood control levees, multi-purpose dams, locks, navigation channels, port and harbor facilities, and beach protection infrastructure. The Corps of Engineers also regulates the dredging and filling of wetlands subject to federal jurisdictions. Along with its programs for flood damage reduction and support of commercial navigation, ecosystem restoration was added as a primary Corps mission area in 1996. The National Research Council (NRC) Committee on U.S. Army Corps of Engineers on Water Resources Science, Engineering, and Planning was convened by the NRC at the request of the Corps of Engineers to provide independent advice to the Corps on an array of strategic and planning issues. National Water Resources Challenges Facing the U.S. Army Corps of Engineers surveys the key water resources challenges facing the Corps, the limits of what might be expected today from the Corps, and future prospects for the agency. This report presents several findings, but no recommendations, to the Corps of Engineers based on initial investigations and discussions with Corps leadership. National Water Resources Challenges Facing the U.S. Army Corps of Engineers can serve as a foundational resource for the Corps of Engineers, U.S. Congress, federal agencies, and Corps project co-sponsors, among others.
Download or read book Hydrologic Engineering Requirements for Flood Damage Reduction Studies written by and published by . This book was released on 1995 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lock Gates and Other Closures in Hydraulic Projects written by Ryszard Daniel and published by Butterworth-Heinemann. This book was released on 2018-11-27 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lock Gates and Other Closures in Hydraulic Projects shares the authors practical experience in design, engineering, management and other relevant aspects with regard to hydraulic gate projects. This valuable reference on the design, construction, operation and maintenance of navigation lock gates, movable closures of weirs, flood barriers, and gates for harbor and shipyard docks provides systematic coverage on all structural types of hydraulic gates, the selection of gate types, and their advantages and disadvantages. The discussion includes the latest views in new domains, such as environmental impact of hydraulic gate projects, sustainability assessments, relation with the issues of global climate change, handling accidents and calamities, and the bases of asset management. Heavily illustrated, this reference provides a generous amount of case studies based on the author's own and their colleagues' experiences from recent projects in Europe, America and other continents. - Presents extensive coverage of the operational profiles of hydraulic closures, including gates in navigation locks, movable closures on river weirs, closures of flood barriers, spillway closures and valves, and more - Outlines the different structural types of hydraulic gates, including miter gates, vertical lift gates, flap and hinged crest gates, radial gates, rolling and barge gates, sector gates and many other - Clearly outlines the selection process for gates for navigation locks, river weirs, flood barriers, hydroelectric plants, shipyard docks and other hydraulic structures - Provides comprehensive discussion of design loads and other actions to which hydraulic gates may be subjected during their service life, followed by an overview of analysis methods and tools - Addresses the newest challenges and concerns in hydraulic gate projects, such as environmental impact of hydraulic gate projects, risk-based design, sustainability issues, handling accidents and calamities, and gate maintenance in view of asset management - Presents the experiences from many recent projects in Europe and America, including the rolling gates in large European sea locks, gates in the Panama Canal new locks, flood barriers in New Orleans and the Netherlands
Download or read book Design of Movable Weirs and Storm Surge Barriers written by Inland Navigation Commission. Working Group 26 and published by PIANC. This book was released on 2006 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Hydraulic Gates 2nd Edition written by Paulo C.F. Erbisti and published by CRC Press. This book was released on 2014-05-29 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and updated, this second edition of Design of Hydraulic Gates maintains the same goal as the original: to be used as a textbook and a manual of design of gates, presenting the main aspects of design, manufacture, installation and operation of hydraulic gates, while introducing new products, technologies and calculation procedures. This edition included new chapters on intake gates and trashrack design, highlighting the aspects of safety, operational and maintenance procedures. To improve the strength against structural failure of intake trashracks, the author proposes a series of rigid calculation assumptions, design parameters and manufacturing procedures, which will certainly result in safer trashracks. Some 340 drawings and photographs, 82 tables, 107 references and 23 worked examples help the reader to understand the basic concepts and calculation methods presented.
Download or read book Hydraulic Design of Stilling Basins and Energy Dissipators written by A. J. Peterka and published by Createspace Independent Pub. This book was released on 2015-03-04 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although hundreds of stilling basins and energydissipating devices have been designed in conjunction with spillways, outlet works, and canal structures, it is often necessary to make model studies of individual structures to be certain that these will operate as anticipated. The reason for these repetitive tests is that a factor of uncertainty exists regarding the overall performance characteristics of energy dissipators. The many laboratory studies made on individual structures over a period of years have been made by different personnel, for different groups of designers, each structure having different allowable design limitations. Since no two structures were exactly alike, attempts to generalize the assembled data resulted in sketchy and, at times, inconsistent results having only vague connecting links. Extensive library research into the works of others revealed the fact that the necessary correlation factors are nonexistent. To fill the need for up-to-date hydraulic design information on stilling basins and energy dissipators, a research program on this general subject was begun with a study of the hydraulic jump, observing all phases as it occurs in open channel flow. With a broader understanding of this phenomenon it was then possible to proceed to the more practical aspects of stilling basin design. This monograph generalizes the design of stilling basins, energy dissipators of several kinds and associated appurtenances. General design rules are presented so that the necessary dimensions for a particular structure may be easily and quickly determined, and the selected values checked by others without the need for exceptional judgment or extensive previous experience. Proper use of the material in this monograph will eliminate the need for hydraulic model tests on many individual structures, particularly the smaller ones. Designs of structures obtained by following the recommendations presented here will be conservative in that they will provide a desirable factor of safety. However, model studies will still prove beneficial to reduce structure sizes further, to account for nonsymmetrical conditions of approach or getaway, or to evaluate other unusual conditions not described herein.
