Download or read book Engineering and Design Air Stripping written by and published by . This book was released on 2001-10-01 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides technical information for designing and constructing air stripping systems. Example designs are provided in the appendices. Basic information about air strippers can be found in the Tri- Service sponsored Remediation Technologies Screening Matrix and Reference Guide.
Download or read book An Introduction to Air Stripping to Remove VOCs from Water written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2019-09-08 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil, environmental and mechanical engineers and construction managers interested in removal of volatile organic compounds from water streams using air stripping technology. Here is what is discussed: 1. INTRODUCTION 2. DESCRIPTION OF AIR STRIPPERS 3. DESIGN METHODS 4. TREATABILITY 5. COMPARISON OF AIR STRIPPERS 6. AIR POLLUTION CONTROL REQUIREMENTS 7. FLOODING 8. PROCESS CONTROL 9. ECONOMIC EVALUATION 10. REFERENCES.
Download or read book An Introduction to Air Stripping written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2019-10-25 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for mechanical and environmental engineers interested in air stripping technology. Here is what is discussed: 1. INTRODUCTION 2. DESCRIPTION OF AIR STRIPPERS 3. DESIGN METHODS 4. TREATABILITY 5. COMPARISON OF AIR STRIPPERS 6. AIR POLLUTION CONTROL REQUIREMENTS 7. FLOODING 8. PROCESS CONTROL 9. ECONOMIC EVALUATION. 10. EXAMPLES OF AIR STRIPPING BY LOW PROFILESIEVE TRAY DEVICE 11. EXAMPLE OF AIR STRIPPING BY PACKED COLUMN.
Download or read book Advanced Physicochemical Treatment Processes written by Lawrence K. Wang and published by Springer Science & Business Media. This book was released on 2007-11-10 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past thirty years have witnessed a growing worldwide desire that po- tive actions be taken to restore and protect the environment from the degr- ing effects of all forms of pollution—air, water, soil, and noise. Because pollution is a direct or indirect consequence of waste, the seemingly idealistic demand for “zero discharge” can be construed as an unrealistic demand for zero waste. However, as long as waste continues to exist, we can only attempt to abate the subsequent pollution by converting it to a less noxious form. Three major questions usually arise when a particular type of pollution has been id- tified: (1) How serious is the pollution? (2) Is the technology to abate it ava- able? and (3) Do the costs of abatement justify the degree of abatement achieved? This book is one of the volumes of the Handbook of Environmental Engineering series. The principal intention of this series is to help readers f- mulate answers to the last two questions above. The traditional approach of applying tried-and-true solutions to specific pollution problems has been a major contributing factor to the success of en- ronmental engineering, and has accounted in large measure for the establi- ment of a “methodology of pollution control. ” However, the realization of the ever-increasing complexity and interrelated nature of current environmental problems renders it imperative that intelligent planning of pollution abatement systems be undertaken.
Download or read book Air Stripping written by and published by . This book was released on 2001 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: This design guide (DG) provides design and construction information for implementation of air stripping systems. This DG applies to all USACE Commands with planning, design, or construction responsibility for air stripping systems. Approved for public release; distribution is unlimited.
Download or read book An Introduction to Air Stripping written by J. Paul Guyer and published by Independently Published. This book was released on 2018-05-06 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil, environmental and mechanical engineers interested in air stripping for cleaning contaminated air streams. Here is what is discussed: 1. INTRODUCTION 2. DESCRIPTION OF AIR STRIPPERS 3. DESIGN METHODS 4. TREATABILITY 5. COMPARISON OF AIR STRIPPERS 6. AIR POLLUTION CONTROL REQUIREMENTS 7. FLOODING 8. PROCESS CONTROL 9. ECONOMIC EVALUATION. 10. EXAMPLES OF AIR STRIPPING BY LOW PROFILESIEVE TRAY DEVICE 11. EXAMPLE OF AIR STRIPPING BY PACKED COLUMN.
Download or read book Air Stripping of Aqueous Solutions written by Jim Rawe and published by . This book was released on 1991 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Scale up Suitability for Air stripping Columns written by Harold Wallman and published by . This book was released on 1986 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book EPA Environmental Engineering Sourcebook written by J. Russell Boulding and published by CRC Press. This book was released on 1996-03-01 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Environmental Protection Agency (U.S. EPA) publishes several series of documents that provide up-to-date information about environmental site assessment and remediation. The EPA Environmental Engineering Sourcebook includes papers and bulletins that focus on remediation of soil and groundwater, making them available in a convenient form. This book compiles thirty-five documents- written by recognized leaders - on major methods and promising new techniques for hazardous waste treatment and site remediation. Each chapter evaluates the type of contaminant and site characteristics needed to select a technology for use at hazardous waste sites. The EPA Environmental Engineering Sourcebook presents EPA documents in an easy-to-use, concise format. It contains numerous graphs, charts and figures that make it an important resource for those involved in environmental protection, site remediation, and site assessment. Features Contains chapters written by recognized leaders Examines major methods as well as assesses new techniques for hazardous waste treatment and site remediation Presents information in an easy-to-use, concise format Evaluates each type of contaminant and site characteristics for selecting technology at hazardous waste sites
Download or read book Remediation Engineering written by Suthan S. Suthersan and published by CRC Press. This book was released on 1996-10-24 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many cases, the application of in situ technologies evolved as a necessity from a cost perspective. However, the basic understanding of the mechanisms and theory behind these technologies was treated as a "black box." Although we have seen some tremendous successes in the application of remediation technologies over the past several years, we have also seen many cases in which a technology has been incorrectly or inappropriately applied. In most cases, this misapplication has been the result of a poor understanding of the basic concepts and mechanisms behind the technologies. Without proper understanding, the potential for misapplication of technologies remains a serious economic and technical threat.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Air Superfund National Technical Guidance Study Series Air Stripper Design Manual written by United States Environmental Protection Agency (EPA) and published by Createspace Independent Publishing Platform. This book was released on 2018-08-20 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Air-Superfund National Technical Guidance Study Series Air Stripper Design Manual
Download or read book An Introduction to Air Stripping to Remove VOCs from Water written by J. Paul Guyer and published by . This book was released on 2019-09-08 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil, environmental and mechanical engineers and construction managers interested in removal of volatile organic compounds from water streams using air stripping technology. Here is what is discussed:1. INTRODUCTION2. DESCRIPTION OF AIR STRIPPERS3. DESIGN METHODS4. TREATABILITY5. COMPARISON OF AIR STRIPPERS6. AIR POLLUTION CONTROL REQUIREMENTS7. FLOODING8. PROCESS CONTROL9. ECONOMIC EVALUATION10. REFERENCES.
Download or read book Air Stripping for Volatile Organic Contaminant Removal written by and published by . This book was released on 1989 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stantec s Water Treatment written by John C. Crittenden and published by John Wiley & Sons. This book was released on 2022-11-08 with total page 1956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The updated third edition of the definitive guide to water treatment engineering, now with all-new online content Stantec's Water Treatment: Principles and Design provides comprehensive coverage of the principles, theory, and practice of water treatment engineering. Written by world-renowned experts in the field of public water supply, this authoritative volume covers all key aspects of water treatment engineering, including plant design, water chemistry and microbiology, water filtration and disinfection, residuals management, internal corrosion of water conduits, regulatory requirements, and more. The updated third edition of this industry-standard reference includes an entirely new chapter on potable reuse, the recycling of treated wastewater into the water supply using engineered advanced treatment technologies. QR codes embedded throughout the book connect the reader to online resources, including case studies and high-quality photographs and videos of real-world water treatment facilities. This edition provides instructors with access to additional resources via a companion website. Contains in-depth chapters on processes such as coagulation and flocculation, sedimentation, ion exchange, adsorption, and gas transfer Details membrane filtration technologies, advanced oxidation, and potable reuse Addresses ongoing environmental concerns, pharmacological agents in the water supply, and treatment strategies Describes reverse osmosis applications for brackish groundwater, wastewater, and other water sources Includes high-quality images and illustrations, useful appendices, tables of chemical properties and design data, and more than 450 exercises with worked solutions Stantec's Water Treatment: Principles and Design, Updated Third Edition remains an indispensable resource for engineers designing or operating water treatment plants, and is an essential textbook for students of civil, environmental, and water resources engineering.
Download or read book Combined Air Stripper written by and published by . This book was released on 1992 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: Air stripping is an economical and efficient method of removing dissolved volatile organic compounds (VOCs) from contaminated groundwater. Air strippers, however, produce a vent air stream, which must meet the local air quality limits. If the VOC content exceeds the limits, direct discharge is not possible; therefore, a carbon adsorption VOC capture system is used to treat the vent air. This treatment step adds a cost of at least $50/lb of VOC captured. In this program, a combined air stripper/membrane vapor separation system was constructed and demonstrated in the laboratory. The membrane system captures VOCs from the stripper vent stream at a projected cost of $15/lb VOC for a water VOC content of 5 ppmw, and $75/lb VOC for a water VOC content of 1 ppmw. The VOCs are recovered as a small, concentrated liquid fraction for disposal or solvent recycling. The concept has been demonstrated in experiments with a system capable of handling up to 150,000 gpd of water. The existing demonstration system is available for field tests at a DOE facility or remediation site. Replacement of the current short air stripping tower (effective height 3 m) with a taller tower is recommended to improve VOC removal.
Download or read book Absorption Stripping written by P. Chattopadhyay and published by Asian Books Private Limited. This book was released on 2007 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Absorption And Stripping Are Essential Two Very Important Unit Operations Frequently Encountered In Both Cpis And Pcis. In Many Plants, Absorption & Stripping Operate In Conjunction With Distillation The Oldest Unit Operation That Emerged From Alchemists Laboratory Centuries Back.Contents: Absorption; Stripping; Hydraulics Of Operation; Design: Basic Concepts; Design: Absorbers & Strippers; Packings; Packed Tower Internals; Typical Absorptions Of Industrial Importance; Revamping Absorbers And Strippers; Cost Estimation Of Absorption Tower; Miscellaneous; Index; Etc.
