Download or read book Engineer Prime Power Operations FM 3 34 480 written by Department Army and published by CreateSpace. This book was released on 2012-10-17 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field Manual (FM) 3-34.480 supports engineer, Army, and joint missions throughout full spectrum operations. This FM provides a doctrinal basis for planning and employing engineer prime power assets in the operational environment. It describes the responsibilities, relationships, capabilities, constraints, planning considerations, and logistical requirements associated with engineer prime power operations. The fundamental purpose of this FM is to integrate engineer prime power operations into the Army strategic and operational missions and support to joint operations. The primary audiences for this FM are engineer commanders and staffs. This FM will help support commanders and staffs or those who may require prime power support to understand the engineer prime power mission. Federal, state, and local government officials will find this information useful in homeland security planning. This publication applies to the Active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated.
Download or read book Technical Manual Tm 3 34 45 Fm 3 34 480 Engineer Prime Power Operations August 2013 written by United States Government US Army and published by CreateSpace. This book was released on 2013-09-03 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical Manual (TM) 3-34.45 supports engineer, Army, and joint missions throughout full spectrum operations. This TM provides a doctrinal basis for planning and employing engineer prime power assets in the operational environment. It describes the responsibilities, relationships, capabilities, constraints, planning considerations, and logistical requirements associated with engineer prime power operations. The fundamental purpose of this TM is to integrate engineer prime power operations into the Army strategic and operational missions and support to joint operations. The primary audiences for this TM are engineer commanders and staffs. This TM will help support commanders and staffs or those who may require prime power support to understand the engineer prime power mission. Federal, state, and local government officials will find this information useful in homeland security planning. This publication applies to the Active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated. Terms that have joint or Army definitions are identified in both the glossary and the text. These terms and their definitions can be found in FM 1-02. For other definitions in the text, the term is italicized, and the number of the proponent FM follows the definition. Appendix A contains a metric conversion chart. Appendix B outlines the most frequently asked questions about prime power. Appendix C discusses the electrical specialists of each Service of the U.S. military and the special role they play within their respective Service. The proponent for this publication is the United States Army Training and Doctrine Command (TRADOC).
Download or read book Field Manual FM 3 34 480 FM 5 422 Engineer Prime Power Operations April 2007 written by United States Army and published by Createspace Independent Pub. This book was released on 2012-08-12 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field Manual (FM) 3-34.480 supports engineer, Army, and joint missions throughout full spectrum operations. This FM provides a doctrinal basis for planning and employing engineer prime power assets in the operational environment. It describes the responsibilities, relationships, capabilities, constraints, planning considerations, and logistical requirements associated with engineer prime power operations. The fundamental purpose of this FM is to integrate engineer prime power operations into the Army strategic and operational missions and support to joint operations. The primary audiences for this FM are engineer commanders and staffs. This FM will help support commanders and staffs or those who may require prime power support to understand the engineer prime power mission. Federal, state, and local government officials will find this information useful in homeland security planning. This publication applies to the Active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated. Terms that have joint or Army definitions are identified in both the glossary and the text. Glossary references: The glossary lists most terms used in FM 3-34.480 that have joint or Army definitions. Terms for which FM 3-34.480 is the proponent FM (the authority) are indicated with an asterisk in the glossary. Text references: Definitions for which FM 3-34.480 is the proponent FM are printed in boldface in the text. These terms and their definitions will be incorporated into the next revision of FM 1-02. For other definitions in the text, the term is italicized, and the number of the proponent FM follows the definition. Appendix A contains a metric conversion chart. Appendix B outlines the most frequently asked questions about prime power. Appendix C discusses the electrical specialists of each Service of the U.S. military and the special role they play within their respective Service.
Download or read book FM 3 34 480 Engineer Prime Power Operations written by U S Army and published by . This book was released on 2021-04-04 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field Manual (FM) 3-34.480 supports engineer, Army, and joint missions throughout full spectrum operations. This FM provides a doctrinal basis for planning and employing engineer prime power assets in the operational environment. It describes the responsibilities, relationships, capabilities, constraints, planning considerations, and logistical requirements associated with engineer prime power operations.
Download or read book The Engineer written by and published by . This book was released on 2015 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book FM 5 422 Engineer Prime Power Operations written by U S Army and published by . This book was released on 2021-04-28 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: This field manual (FM) provides a doctrinal basis for planning and employing engineer prime power assets in the theater of operations (TO). It describes the responsibilities, relationships, capabilities, constraints, planning considerations, and logistics requirements associated with engineer prime power operations.
Download or read book Fm 5 34 Engineer Field Data written by Headquarters Department of The Army and published by Createspace Independent Publishing Platform. This book was released on 2017-10-09 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineer Field Data is designed as an authoritative reference for the military engineer. It covers everything from concreting to improvised munitions!
Download or read book Toward Combined Arms Warfare written by Jonathan Mallory House and published by DIANE Publishing. This book was released on 1985 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineers at War Hardcover written by Adrian G. Traas and published by Government Printing Office. This book was released on 2011-02 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: NOTE: NO FURTHER DISCOUNT FOR THIS PRINTED PRODUCT- OVERSTOCK SALE -- Significantly reduced list price Engineers at War describes the role of military engineers, especially the U.S. Army Corps of Engineers, in the Vietnam War. It is a story of the engineers' battle against an elusive and determined enemy in one of the harshest underdeveloped regions of the world. Despite these challenges, engineer soldiers successfully carried out their combat and construction missions. The building effort in South Vietnam allowed the United States to deploy and operate a modern 500,000-man force in a far-off region. Although the engineers faced huge construction tasks, they were always ready to support the combat troops. They built ports and depots, carved airfields and airstrips out of jungle and mountain plateaus, repaired roads and bridges, and constructed bases. Because of these efforts, ground combat troops with their supporting engineers were able to fight the enemy from well-established bases. Although most of the construction was temporary, more durable facilities, such as airfields, port and depot complexes, headquarters buildings, communications facilities, and an improved highway system, were intended to serve as economic assets for South Vietnam. This volume covers how the engineers grew from a few advisory detachments to a force of more than 10 percent of the Army troops serving in South Vietnam. The 35th Engineer Group began arriving in large numbers in June 1965 to begin transforming Cam Ranh Bay into a major port, airfield, and depot complex. Within a few years, the Army engineers had expanded to a command, two brigades, six groups, twenty-eight construction and combat battalions, and many smaller units. Other products produced by the U.S. Army, Center of Military History can be found here: https://bookstore.gpo.gov/agency/1061
Download or read book The Corps of Engineers written by Blanche D. Coll and published by . This book was released on 1958 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Spearhead of Logistics written by Benjamin King and published by Government Printing Office. This book was released on 2016-02-25 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spearhead of Logistics is a narrative branch history of the U.S. Army's Transportation Corps, first published in 1994 for transportation personnel and reprinted in 2001 for the larger Army community. The Quartermaster Department coordinated transportation support for the Army until World War I revealed the need for a dedicated corps of specialists. The newly established Transportation Corps, however, lasted for only a few years. Its significant utility for coordinating military transportation became again transparent during World War II, and it was resurrected in mid-1942 to meet the unparalleled logistical demands of fighting in distant theaters. Finally becoming a permanent branch in 1950, the Transportation Corps continued to demonstrate its capability of rapidly supporting U.S. Army operations in global theaters over the next fifty years. With useful lessons of high-quality support that validate the necessity of adequate transportation in a viable national defense posture, it is an important resource for those now involved in military transportation and movement for ongoing expeditionary operations. This text should be useful to both officers and noncommissioned officers who can take examples from the past and apply the successful principles to future operations, thus ensuring a continuing legacy of Transportation excellence within Army operations. Additionally, military science students and military historians may be interested in this volume.
Download or read book The Corps of Engineers written by Alfred M Beck and published by Franklin Classics. This book was released on 2018-10-15 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important and is part of the knowledge base of civilization as we know it. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. To ensure a quality reading experience, this work has been proofread and republished using a format that seamlessly blends the original graphical elements with text in an easy-to-read typeface. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. New discussion of conceptual plant design, flowsheet development and revamp design Significantly increased coverage of capital cost estimation, process costing and economics New chapters on equipment selection, reactor design and solids handling processes New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography Increased coverage of batch processing, food, pharmaceutical and biological processes All equipment chapters in Part II revised and updated with current information Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards Additional worked examples and homework problems The most complete and up to date coverage of equipment selection 108 realistic commercial design projects from diverse industries A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Seize the High Ground written by James A. Walker and published by Government Printing Office. This book was released on 2003 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: "[Seize the high ground is a] narrative history of the Army's aerospace experience from the 1950s to the present. The focus is on ballistic missile defense, from the early NIKE-HERCULES missile program through the SAFEGUARD acquisition site allowed by the 1972 ABM Treaty to the more advanced 'Star Wars' concepts studies toward the end of the century. [What is] covered is not only the technological response to the threat but the organizational and tactical development of the commands and units responsible for the defense mission"--CMH website.
Download or read book The Whirlwind War written by Frank N. Schubert and published by Government Printing Office. This book was released on 1995 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMH Publication 70-30. Edited by Frank N. Schubert and TheresaL. Kraus. Discusses the United States Army's role in the Persian Gulf War from August 1990 to February 1991. Shows the various strands that came together to produce the army of the 1990s and how that army in turn performed under fire and in the glare of world attention. Retains a sense of immediacy in its approach. Contains maps which were carefully researched and compiled as original documents in their own right. Includes an index.
Download or read book Software Defined Radio for Engineers written by Alexander M. Wyglinski and published by Artech House. This book was released on 2018-04-30 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the popular Artech House classic, Digital Communication Systems Engineering with Software-Defined Radio, this book provides a practical approach to quickly learning the software-defined radio (SDR) concepts needed for work in the field. This up-to-date volume guides readers on how to quickly prototype wireless designs using SDR for real-world testing and experimentation. This book explores advanced wireless communication techniques such as OFDM, LTE, WLA, and hardware targeting. Readers will gain an understanding of the core concepts behind wireless hardware, such as the radio frequency front-end, analog-to-digital and digital-to-analog converters, as well as various processing technologies. Moreover, this volume includes chapters on timing estimation, matched filtering, frame synchronization message decoding, and source coding. The orthogonal frequency division multiplexing is explained and details about HDL code generation and deployment are provided. The book concludes with coverage of the WLAN toolbox with OFDM beacon reception and the LTE toolbox with downlink reception. Multiple case studies are provided throughout the book. Both MATLAB and Simulink source code are included to assist readers with their projects in the field.
Download or read book Electromagnetic Compatibility Engineering written by Henry W. Ott and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for Noise Reduction Techniques IN electronic systems "Henry Ott has literally 'written the book' on the subject of EMC. . . . He not only knows the subject, but has the rare ability to communicate that knowledge to others." —EE Times Electromagnetic Compatibility Engineering is a completely revised, expanded, and updated version of Henry Ott's popular book Noise Reduction Techniques in Electronic Systems. It reflects the most recent developments in the field of electromagnetic compatibility (EMC) and noise reduction¿and their practical applications to the design of analog and digital circuits in computer, home entertainment, medical, telecom, industrial process control, and automotive equipment, as well as military and aerospace systems. While maintaining and updating the core information—such as cabling, grounding, filtering, shielding, digital circuit grounding and layout, and ESD—that made the previous book such a wide success, this new book includes additional coverage of: Equipment/systems grounding Switching power supplies and variable-speed motor drives Digital circuit power distribution and decoupling PCB layout and stack-up Mixed-signal PCB layout RF and transient immunity Power line disturbances Precompliance EMC measurements New appendices on dipole antennae, the theory of partial inductance, and the ten most common EMC problems The concepts presented are applicable to analog and digital circuits operating from below audio frequencies to those in the GHz range. Throughout the book, an emphasis is placed on cost-effective EMC designs, with the amount and complexity of mathematics kept to the strictest minimum. Complemented with over 250 problems with answers, Electromagnetic Compatibility Engineering equips readers with the knowledge needed to design electronic equipment that is compatible with the electromagnetic environment and compliant with national and international EMC regulations. It is an essential resource for practicing engineers who face EMC and regulatory compliance issues and an ideal textbook for EE courses at the advanced undergraduate and graduate levels.
