Download or read book Engineer Operations Brigade Combat Team and Below February 2009 Field Manual Fm 3 34 22 Fm 3 34 221 5 7 30 5 71 2 5 71 3 written by United States Government Us Army and published by CreateSpace. This book was released on 2012-03-08 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The engineer support doctrine for the brigade combat team (BCT) is focused on tactical-level maneuvers. The engineer organizations organic to the BCT are optimized to perform combat engineering (primarily mobility with limited capabilities in countermobility and survivability) tasks with geospatial engineering support provided by the organic terrain teams. Additional engineering support (combat and general) comes from modular engineer organizations that are task-organized to the BCT or providing support from echelons above brigade (EAB) organizations. This manual is aligned with current BCT doctrine (see Field Manual [FM] 3-90.6) and describes engineer support for the heavy brigade combat team (HBCT), infantry brigade combat team (IBCT), and Stryker brigade combat team (SBCT). Although the armored cavalry regiment (ACR) and its engineer company is not specifically addressed, the basic principles of this manual also apply to those organizations. This manual combines, updates, and supersedes material from the following four tactical-level engineer manuals: - FM 3-34.221. - FM 5-7-30. - FM 5-71-2. - FM 5-71-3. This manual is built directly on the doctrine contained in the following manuals: - FM 3-0. - FM 3-07. - FM 3-34. - FM 3-90. - FM 3-90.5. - FM 3-90.6. - FM 3-90.61. - FM 4-0. - FM 5-0. - FM 6-0. Given the magnitude of doctrinal changes in recent years, becoming familiar with these FMs is essential to effectively using this manual. This manual applies across the spectrum of conflict, from peacetime engagement to major combat operations. It is focused at the tactical level of war and meets the tactical commander's engineer support requirements. It is the tactical engineer commander's guide regarding the aspects of operations in support of the BCT and intended for use by brigade and below commanders and supporting staff (augmenting unit commanders, staffs supporting brigade and below maneuver organizations). This manual serves as a reference document for engineer commanders, staff, leaders, training developers, and doctrine developers throughout the Army. It is a primary manual for instructional purposes within the U.S. Army Engineer School (USAES) and assists other Army branch schools in teaching the integration of engineer capabilities into Army operations, since engineer involvement is a given for nearly every military operation. This manual includes guidance on integrating organic and augmenting engineer forces into BCT tactical plans, orders production, and mission execution. It incorporates the use of essential tasks for mobility, countermobility, and survivability (M/CM/S) in BCT operations and highlights the organic and likely engineer augmentation to the BCT as it operates across the spectrum of conflict. - Chapter 1 describes engineer roles in support of the BCT and includes considerations for operating in the operational environment (OE). - Chapter 2 focuses on the integration of engineer operations during planning and the command and control (C2) of engineer forces during execution. - Chapter 3 describes engineer support to operations and the integration of engineer reconnaissance. - Chapter 4 focuses on the varying levels and types of engineer support for each form of security operations performed by the BCT. - Chapter 5 describes the targeting process and engineer involvement in planning lethal and nonlethal fires in the BCT. - Chapter 6 describes how the modular engineer force provides specialized capabilities to meet the needs of the BCT during offensive and defensive operations. - Chapter 7 provides an overview of and discusses some of the associated engineer tasks and special considerations for each. - Chapter 8 focuses on sustainment support for engineer operations within the BCT. This publication applies to the Active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated.
Download or read book Engineer Operations Brigade Combat Team and Below written by Department Army and published by . This book was released on 2008-02-11 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The engineer support doctrine for the brigade combat team (BCT) is focused on tactical-level maneuvers. The engineer organizations organic to the BCT are optimized to perform combat engineering (primarily mobility with limited capabilities in countermobility and survivability) tasks with geospatial engineering support provided by the organic terrain teams. Additional engineering support (combat and general) comes from modular engineer organizations that are task-organized to the BCT or providing support from echelons above brigade (EAB) organizations. This manual is aligned with current BCT doctrine (see Field Manual [FM] 3-90.6) and describes engineer support for the heavy brigade combat team (HBCT), infantry brigade combat team (IBCT), and Stryker brigade combat team (SBCT). Although the armored cavalry regiment (ACR) and its engineer company is not specifically addressed, the basic principles of this manual also apply to those organizations.This manual combines, updates, and supersedes material from the following four tactical-level engineer manuals: - FM 3-34.221.- FM 5-7-30.- FM 5-71-2.- FM 5-71-3.This manual is built directly on the doctrine contained in the following manuals:- FM 3-0.- FM 3-07.- FM 3-34.- FM 3-90.- FM 3-90.5.- FM 3-90.6.- FM 3-90.61.- FM 4-0.- FM 5-0.- FM 6-0.Given the magnitude of doctrinal changes in recent years, becoming familiar with these FMs is essential to effectively using this manual. This manual applies across the spectrum of conflict, from peacetime engagement to major combat operations. It is focused at the tactical level of war and meets the tactical commander's engineer support requirements. It is the tactical engineer commander's guide regarding the aspects of operations in support of the BCT and intended for use by brigade and below commanders and supporting staff (augmenting unit commanders, staffs supporting brigade and below maneuver organizations).This manual serves as a reference document for engineer commanders, staff, leaders, training developers, and doctrine developers throughout the Army. It is a primary manual for instructional purposes within the U.S. Army Engineer School (USAES) and assists other Army branch schools in teaching the integration of engineer capabilities into Army operations, since engineer involvement is a given for nearly every military operation.This manual includes guidance on integrating organic and augmenting engineer forces into BCT tactical plans, orders production, and mission execution. It incorporates the use of essential tasks for mobility, countermobility, and survivability (M/CM/S) in BCT operations and highlights the organic and likely engineer augmentation to the BCT as it operates across the spectrum of conflict.
Download or read book Field Manual 3 34 Engineer Operations August 2011 written by United States Government US Army and published by CreateSpace. This book was released on 2012-05-20 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field Manual (FM) 3-34 is the Army's keystone doctrinal publication for the Engineer Regiment. It presents overarching doctrinal guidance and direction for conducting engineer activities and shows how they contribute to full spectrum operations. It provides a common framework and language for engineer support to operations and constitutes the doctrinal foundation for developing the other fundamentals and tactics, techniques, and procedures (TTP) detailed in subordinate doctrinal manuals in the FM 3-34 series. This manual is a key integrating publication that links the doctrine for the Engineer Regiment with Army capstone doctrine and joint doctrine. It focuses on synchronizing and coordinating the diverse range of capabilities in the Engineer Regiment to successfully support the Army and its mission. FM 3-34 provides operational guidance for engineer commanders and trainers at all echelons and forms the foundation for Army Engineer School curricula. To comprehend the doctrine contained in FM 3-34, readers must first understand the elements of full spectrum operations, operational design, and the elements of combat power as described in FM 3-0 and addressed in FM 2-0, FM 3-13, FM 3-37, FM 4-0, FM 6-0, and FM 6-22. In addition, readers must be familiar with FM 3-07, FM 3-28, and FM 3-90. They must understand how offensive, defensive, and stability or civil support operations complement each other. Readers must also understand the operations process described in FM 5-0, and the terms and symbols in FM 1-02/MCRP5-12A. This edition of FM 3-34 provides keystone doctrine on engineer support to operations with a chapter for each of the three major sections of the engineer framework and chapters on mission command considerations, engineers in the operations process, and sustainment considerations. Chapter 1 draws from the right side of the engineer framework in figure 1, page vii, examining the context within which engineer support to operations occurs, focusing on those aspects that are most significant to engineers. It provides an engineer view of the following: the operational environment (OE), the operational and mission variables used to describe the OE, unified action, the continuum of operations, the levels of war, and the Army's operational concept-full spectrum operations. The chapter highlights the requirement to simultaneously support offensive, defensive, and stability or civil support operations. Chapter 2 addresses the left side of the engineer framework, providing an overview of the Engineer Regiment, its organizational modularity, and its capabilities. It defines and discusses the engineer disciplines (combat, general, and geospatial engineering), highlighting their interdependence. Chapter 3 addresses the middle portion of the engineer framework, defining the four lines of engineer support and describing their relationships to the engineer disciplines, full spectrum operations, and the warfighting functions. It describes engineer contributions to combat power linked through the lines of engineer support, the capabilities inherent in the engineer disciplines, and the warfighting functions. Chapter 4 provides mission command considerations for engineer support, to include the use of various functional and multifunctional headquarters, describing how the Engineer Regiment "organizes for combat, and synchronizes engineer support to operations with those of other forces. It discusses engineer force tailoring, task organizing, and mission command of engineer forces. Chapter 5 describes how engineer support is integrated into the supported commander's overall operation throughout the operations process. It describes engineer planning activities and considerations for preparing, executing, and continuously assessing engineer support. Chapter 6 discusses sustainment of engineer capabilities. Successful engineer support to operations includes effective incorporation of sustainment support.
Download or read book Field Manual FM 3 34 Engineer Operations August 2011 written by United States Government US Army and published by Createspace Independent Pub. This book was released on 2012-08-12 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field Manual (FM) 3-34 is the Army's keystone doctrinal publication for the Engineer Regiment. It presents overarching doctrinal guidance and direction for conducting engineer activities and shows how they contribute to full spectrum operations. It provides a common framework and language for engineer support to operations and constitutes the doctrinal foundation for developing the other fundamentals and tactics, techniques, and procedures (TTP) detailed in subordinate doctrinal manuals in the FM 3-34 series. This manual is a key integrating publication that links the doctrine for the Engineer Regiment with Army capstone doctrine and joint doctrine. It focuses on synchronizing and coordinating the diverse range of capabilities in the Engineer Regiment to successfully support the Army and its mission. FM 3-34 provides operational guidance for engineer commanders and trainers at all echelons and forms the foundation for Army Engineer School curricula. To comprehend the doctrine contained in FM 3-34, readers must first understand the elements of full spectrum operations, operational design, and the elements of combat power as described in FM 3-0 and addressed in FM 2-0, FM 3-13, FM 3-37, FM 4-0, FM 6-0, and FM 6-22. In addition, readers must be familiar with FM 3-07, FM 3-28, and FM 3-90. They must understand how offensive, defensive, and stability or civil support operations complement each other. Readers must also understand the operations process described in FM 5-0, and the terms and symbols in FM 1-02/MCRP5-12A. This edition of FM 3-34 provides keystone doctrine on engineer support to operations with a chapter for each of the three major sections of the engineer framework and chapters on mission command considerations, engineers in the operations process, and sustainment considerations. Chapter 1 draws from the right side of the engineer framework in figure 1, page vii, examining the context within which engineer support to operations occurs, focusing on those aspects that are most significant to engineers. It provides an engineer view of the following: the operational environment (OE), the operational and mission variables used to describe the OE, unified action, the continuum of operations, the levels of war, and the Army's operational concept—full spectrum operations. The chapter highlights the requirement to simultaneously support offensive, defensive, and stability or civil support operations. Chapter 2 addresses the left side of the engineer framework, providing an overview of the Engineer Regiment, its organizational modularity, and its capabilities. It defines and discusses the engineer disciplines (combat, general, and geospatial engineering), highlighting their interdependence. Chapter 3 addresses the middle portion of the engineer framework, defining the four lines of engineer support and describing their relationships to the engineer disciplines, full spectrum operations, and the warfighting functions. It describes engineer contributions to combat power linked through the lines of engineer support, the capabilities inherent in the engineer disciplines, and the warfighting functions. Chapter 4 provides mission command considerations for engineer support, to include the use of various functional and multifunctional headquarters, describing how the Engineer Regiment “organizes for combat, and synchronizes engineer support to operations with those of other forces. It discusses engineer force tailoring, task organizing, and mission command of engineer forces. Chapter 5 describes how engineer support is integrated into the supported commander's overall operation throughout the operations process. It describes engineer planning activities and considerations for preparing, executing, and continuously assessing engineer support. Chapter 6 discusses sustainment of engineer capabilities. Successful engineer support to operations includes effective incorporation of sustainment support.
Download or read book FM 3 34 22 Engineer Operations Brigade Combat Team and Below written by U S Army and published by . This book was released on 2021-04 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The engineer support doctrine for the brigade combat team (BCT) is focused on tactical-level maneuvers. The engineer organizations organic to the BCT are optimized to perform combat engineering (primarily mobility with limited capabilities in countermobility and survivability) tasks with geospatial engineering support provided by the organic terrain teams. Additional engineering support (combat and general) comes from modular engineer organizations that are task-organized to the BCT or providing support from echelons above brigade (EAB) organizations. This manual is aligned with current BCT doctrine (see Field Manual [FM] 3-90.6) and describes engineer support for the heavy brigade combat team (HBCT), infantry brigade combat team (IBCT), and Stryker brigade combat team (SBCT). Although the armored cavalry regiment (ACR) and itsengineer company is not specifically addressed, the basic principles of this manual also apply to those organizations.
Download or read book FM 5 71 3 Brigade Engineer Combat Operations Armored written by U S Army and published by . This book was released on 2021-04-24 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field Manual (FM) 5-71-3 describes how the mechanized division endineer (DIVEN) battalion supports an armored brigade. The manual is designed as an engineer extension of FM 71-3. It serves as a guide for brigade engineers, their staffs and subordinate commanders in planning, integrating and conducting engineer operations. The manual also serves as a guide for the brigade staff and subordinate maneuver commanders on the organization, capabilities and employment of engineers as a brigade combat multiplier.
Download or read book Army Tactics Techniques and Procedures Attp 3 34 23 FM 5 71 100 5 100 15 5 116 Engineer Operations Echelons Above Brigade Combat Team July 2010 written by United States Government US Army and published by CreateSpace. This book was released on 2013-04-19 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Army Tactics, Techniques, and Procedures (ATTP) 3-34.23 describes engineer operations at echelons above brigade (EAB) combat team level. It is the engineer doctrinal manual for engineer support to division, corps, and theater army echelons. The manual is an extension of Field Manual (FM) 3-34, and is linked to joint and Army doctrine to ensure its usefulness for operational-level commanders and staff. This manual serves as a guide for the application of engineer combat power and employment of engineer forces in support of full spectrum operations primarily at higher echelons and within a joint framework.ATTP 3-34.23 consolidates doctrine previously published in three separate manuals: FM 5-71-100, FM 5-100-15, and FM 5-116. The consolidated doctrine has been updated and revised to align with revisions to FM 3-34 and other Army and joint doctrine. The manual is organized into seven chapters plus numerous appendixes to provide additional details on selected operational topics. The first three chapters follow the flow of FM 3-34 and generally describe engineer operations at higher echelons. The next three chapters focus on operations at each of the higher echelons and operational configurations. The final chapter discusses sustainment support to the engineer forces operating at these echelons. A brief description of each of the chapters is provided below:* Chapter 1 describes the engineer view of the operational environment (OE) as it pertains to operations at echelons above BCT. It discusses the challenges and opportunities that translate to requirements for engineer capabilities and combat power. It describes the forces and capabilities available including joint, interagency, and multinational forces. It concludes with a discussion of categorizing capabilities within the engineer functions and synchronizing their application through the warfighting functions.* Chapter 2 discusses implications of the modular force organization for operations at higher echelons. It includes a discussion of the modular engineer force implications and the implications of the modular force headquarters at each higher echelon. It also addresses tailoring engineer force pool capabilities in support of engineer operations.* Chapter 3 lays the foundations for engineer operations at EAB. It focuses on integration at each echelon and throughout the entire operations process. It includes a discussion of the engineer coordinator (ENCOORD). It also describes command and support relationships as the critical linkage for engineer integration throughout the force.* Chapter 4 describes engineer operations at the theater echelon. It includes a discussion on integration in theater operational design, force-tailoring considerations, and operational themes at this echelon. It also includes a focused discussion on engineer support in each of the operational configurations described for a theater army headquarters.* Chapter 5 describes engineer operations at the corps echelon. It includes a discussion on integration in corps operations processes, force-tailoring considerations, and full spectrum operations at this echelon. It also includes a focused discussion on engineer support in each of the operational configurations described for a corps headquarters.* Chapter 6 describes engineer operations at the division echelon. It includes a discussion on integration in division operations processes, force-tailoring considerations, and full spectrum operations at this echelon. It also includes a focused discussion on engineer support in each of the operational configurations described for a division headquarters.* Chapter 7 discusses sustainment of engineer capabilities. Successful engineer operations include effective incorporation of sustainment support. This chapter describes the integrated sustainment effort required to support engineer operations.
- Author : United States Government Us Army
- Publisher :
- Release : 2021-04-15
- ISBN :
- Pages : 134 pages
Army Techniques Publication ATP 3 34 22 Engineer Operations Brigade Combat Team and Below April 2021
Download or read book Army Techniques Publication ATP 3 34 22 Engineer Operations Brigade Combat Team and Below April 2021 written by United States Government Us Army and published by . This book was released on 2021-04-15 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This United States Army field manual, Army Techniques Publication ATP 3-34.22 Engineer Operations - Brigade Combat Team and Below April 2021, provides a doctrinal foundation for the conduct of engineer operations in support of unified land operations, focused on tactical maneuvers at the brigade combat team (BCT) level and below. The engineer organizations organic to the BCT are optimized to perform combat engineering tasks (primarily mobility with limited capabilities in countermobility and survivability), with geospatial engineering teamsproviding organic capability. Additional engineering support (combat and general) comes from engineer organizations that are task-organized to the BCT or that provide support from echelons above brigade (EAB) organizations. This manual is aligned with current BCT doctrine (see FM 3-96) and describes engineer support for the armored brigade combat team (ABCT), infantry brigade combat team (IBCT), and Stryker brigade combat team (SBCT). Although the security force assistance BCT and its respective engineer battalions are not addressed in detail, the basic principles of this manual also apply to those organizations. The principal audience for ATP 3-34.22 consists of commanders, officers, noncommissioned officers (NCOs), and staff at the BCT level and below as well as EAB units that support BCTs. ATP 3-34.22 is a primary manual for instructional purposes within the United States Army Engineer School and assists other Army branch schools in teaching the integration of engineer capabilities into Army operations. ATP 3-34.22 applies to the Active Army, Army National Guard/Army National Guard of the United States and United States Army Reserve unless otherwise stated.
Download or read book Engineer Operations Echelons Above Brigade Combat Team written by Department Army and published by . This book was released on 2010-07-08 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Army Tactics, Techniques, and Procedures (ATTP) 3-34.23 describes engineer operations at echelons above brigade (EAB) combat team level. It is the engineer doctrinal manual for engineer support to division, corps, and theater army echelons. The manual is an extension of Field Manual (FM) 3-34, and is linked to joint and Army doctrine to ensure its usefulness for operational-level commanders and staff. This manual serves as a guide for the application of engineer combat power and employment of engineer forces in support of full spectrum operations primarily at higher echelons and within a joint framework.ATTP 3-34.23 consolidates doctrine previously published in three separate manuals: FM 5-71-100, FM 5-100-15, and FM 5-116. The consolidated doctrine has been updated and revised to align with revisions to FM 3-34 and other Army and joint doctrine. This revision has been driven by major changes to Army and joint doctrine, including: -- Revision of our Army's capstone manual, FM 3-0.-- Revision of Joint Publication (JP) 3-34.-- Revision of the engineer keystone manual FM 3-34.-- Lessons learned from experience fighting the war on terrorism.-- Conversion of the Army to a brigade combat team (BCT)-based, modular force that is joint andexpeditionary.-- Organization of the Engineer Regiment as the modular engineer force.-- Change from maintaining readiness within the "band of excellence" to achieving readiness through the force pool progression dictated by Army forces generation model.
Download or read book Engineer Operations written by Department of the Army and published by . This book was released on 2009-04-02 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field Manual (FM) 3-34 describes the Engineer Regiment's keystone operational doctrine. The manual is linked to joint and Army doctrine to ensure its usefulness for all joint and Army-level commanders and staff. All other engineer FMs (see Appendix A) are based on the foundations described in this manual and are synchronized with their respective joint publications. The foundations of engineer operations are based on the successful employment of engineers, past and present. This manual describes engineer support to Army forces conducting full spectrum operations within the framework of joint operations. As in FM 3-0, this version of FM 3-34 increases the emphasis on simultaneous offensive, defensive, and stability or civil support operations. This manual has been revised to align with revisions to FM 3-0 and other Army and joint doctrine. A series of conferences at the United States Army Engineer School (USAES) convened to guide the changes in this version of FM 3-34. This revision has been driven by major changes to Army and joint doctrine, including the- * Revision of the Army's capstone manual, FM 3-0. * Revision of Joint Publication (JP) 3-34. * Lessons learned from experience fighting the War on Terrorism. * Conversion of the Army to a brigade combat team (BCT)-based modular force that is joint and expeditionary. * Conversion of the Engineer Regiment to the modular engineer force. * Change from maintaining readiness within the "band of excellence" to achieving readiness through the force pool progression dictated by the Army Force Generation (ARFORGEN) Model. FM 3-34 provides operational guidance for engineer commanders and trainers at all echelons and forms the foundation for established curriculum within the engineer portions of the Army's education system. Information contained in this manual will assist multinational forces and other Services and branches of the Army to plan and integrate engineer capabilities. This doctrine also will assist Army branch schools in teaching the integration of engineer capabilities into Army and joint operations. Terms that have joint or Army definitions are identified in both the glossary and the text. Glossary terms: The glossary lists most terms used in FM 3-34 that have joint or Army definitions. Terms with an asterisk in the glossary indicate that this FM is the proponent FM (the authority). Text references: Definitions printed in boldface in the text indicate that this FM is the proponent FM. These terms and their definitions will be incorporated into the next revision of FM 1-02. For other definitions in the text, the term is italicized, and the number of the proponent FM follows the definition.
Download or read book Field Manual FM 3 34 Engineer Operations written by Department of the Army and published by . This book was released on 2020-01-31 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: FIELD MANUAL FM 3-34 Engineer Operations April 2014 Notice: This is a Paperback book version of the "FIELD MANUAL FM 3-34 Engineer Operations April 2014". Full version, All Chapters included. This publication is available (Electronic version) in the official website of the United states HEADQUARTERS, DEPARTMENT OF THE ARMY. This document is properly formatted and printed as a perfect sized copy 8.5x11 (black ink)", making it easy for you to read details in some figures/illustrations and tables. * The version of this publication is as described above (this article is updated after each new edition). Disclaimer: "The use or appearance of United States Department of Army publications, text, images or logos on a non-Federal Government website does not imply or constitute Department of Army endorsement of the distribution service."
Download or read book Army Techniques Publication Atp 3 34 22 Engineer Operations brigade Combat Team and Below December 2014 written by United States Government US Army and published by Createspace Independent Publishing Platform. This book was released on 2016-10-01 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual, Army Techniques Publication ATP 3-34.22 ENGINEER OPERATIONS-BRIGADE COMBAT TEAM AND BELOW December 2014, provides a doctrinal foundation for the conduct of engineer operations in support of unified land operations that are focused on tactical maneuvers at the brigade combat team (BCT) level and below. The engineer support doctrine for the BCT is focused on tactical-level maneuvers. The engineer organizations that are organic to the BCT are optimized to perform combat engineering tasks (primarily mobility with limited capabilities in countermobility and survivability). Geospatial engineering support is provided by organic terrain teams. Additional engineering support (combat and general) comes from engineer organizations that are task-organized to the BCT or that provide support from echelons above brigade (EAB) organizations. This manual is aligned with current BCT doctrine and describes engineer support for the armored BCT, infantry BCT, and Stryker BCT. (See FM 3-90.6.) Although the armored cavalry regiment and engineer company are not specifically addressed, the basic principles of this manual also apply to those organizations.
Download or read book Engineer Operations Echelons Above Brigade Combat Team written by U. S. Army Training And Doctrine Command and published by . This book was released on 2011-11 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manual is organized into seven chapters plus numerous appendixes to provide additional details on selected operational topics. The first three chapters follow the flow of FM 3-34 and generally describe engineer operations at higher echelons. The next three chapters focus on operations at each of the higher echelons and operational configurations. The final chapter discusses sustainment support to the engineer forces operating at these echelons. A brief description of each of the chapters is provided below: Chapter 1 describes the engineer view of the operational environment (OE) as it pertains to operations at echelons above BCT. It discusses the challenges and opportunities that translate to requirements for engineer capabilities and combat power. It describes the forces and capabilities available including joint, interagency, and multinational forces. It concludes with a discussion of categorizing capabilities within the engineer functions and synchronizing their application through the warfighting functions. Chapter 2 discusses implications of the modular force organization for operations at higher echelons. It includes a discussion of the modular engineer force implications and the implications of the modular force headquarters at each higher echelon. It also addresses tailoring engineer force pool capabilities in support of engineer operations. Chapter 3 lays the foundations for engineer operations at EAB. It focuses on integration at each echelon and throughout the entire operations process. It includes a discussion of the engineer coordinator (ENCOORD). It also describes command and support relationships as the critical linkage for engineer integration throughout the force. Chapter 4 describes engineer operations at the theater echelon. It includes a discussion on integration in theater operational design, force-tailoring considerations, and operational themes at this echelon. It also includes a focused discussion on engineer support in each of the operational configurations described for a theater army headquarters. Chapter 5 describes engineer operations at the corps echelon. It includes a discussion on integration in corps operations processes, force-tailoring considerations, and full spectrum operations at this echelon. It also includes a focused discussion on engineer support in each of the operational configurations described for a corps headquarters. Chapter 6 describes engineer operations at the division echelon. It includes a discussion on integration in division operations processes, force-tailoring considerations, and full spectrum operations at this echelon. It also includes a focused discussion on engineer support in each of the operational configurations described for a division headquarters. Chapter 7 discusses sustainment of engineer capabilities. Successful engineer operations include effective incorporation of sustainment support. This chapter describes the integrated sustainment effort required to support engineer operations.
Download or read book Field Manual FM 3 34 Engineer Operations December 2020 written by United States Government Us Army and published by . This book was released on 2020-12-22 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This United States Army publication, Field Manual FM 3-34 Engineer Operations December 2020, contains the capstone doctrinal guidance for U.S. Army engineers. FM 3-34 demonstrates how engineers contribute to decisive action and provides a common framework and language for engineer support to operations. It also constitutes the doctrinal foundation for developing other fundamentals and tactics, techniques, and procedures detailed in subordinate engineer publications. This manual is the integrating publication that nests engineer doctrine with Army capstone doctrine and joint doctrine. It focuses on synchronizing and coordinating the diverse range of capabilities in the Engineer Regiment to support the Army and its mission successfully. FM 3-34 provides operational guidance for engineer commanders and trainers at all echelons and forms the foundation for the United States Army Engineer School (USAES) curricula. The principal audience for this manual is engineer leaders, commanders, noncommissioned officers, and staff officers, but all Army leaders benefit from reading it. Trainers, educators, and combat developers throughout the Army also benefit from using this manual.FM 3-34 applies to the Active Army, Army National Guard/Army National Guard of the United States and United States Army Reserve unless otherwise stated.
Download or read book FM 5 7 30 Brigade Engineer and Engineer Company Combat Operations Airborne Air Assault Light written by U S Army and published by Independently Published. This book was released on 2021-04-23 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field Manual (FM) 5-7-30 is the capstone manual for engineer support to airborne, air assault, and light infantry brigade operations. It is designed to be the engineer extension to FM 7-30. The manual serves as a guide for light brigade engineers and light engineer company commanders in planning, integrating, and conducting engineer operations to support a light brigade. It also serves as a guide to the brigade staff and subordinate maneuver commanders on the organization, capabilities, and employment of engineers as a force multiplier. The manual provides division-level engineer planners with the principles of brigade engineer operations affecting their integration into brigade operations.
Download or read book Field Manual FM 3 34 170 MCWP 3 17 4 FM 5 170 Engineer Reconnaissance March 2008 written by United States Government US Army and published by Createspace Independent Pub. This book was released on 2012-08-06 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doctrine provides a military organization with unity of effort and a common philosophy, language, and purpose. This field manual provides doctrine for the application of engineer reconnaissance capabilities in support of the combined arms team conducting full spectrum operations. Engineer reconnaissance, like chemical, biological, radiological, and nuclear (CBRN) and other technical applications, is not a form of reconnaissance (see chapter 3 for a discussion of the four forms of reconnaissance). Engineer reconnaissance is instead a focused application of special/unique capabilities supporting reconnaissance operations and is applicable over/pertinent to all four forms of reconnaissance. Field manual (FM) 3-34.170/Marine Corps Warfighting Publication (MCWP) 3-17.4 updates the FM that provides doctrinal guidance for engineer reconnaissance in support of full spectrum operations, including engineer reconnaissance in support of tactical operations as well as engineer technical reconnaissance support. This manual supersedes FM 5-170 and supports the doctrine found in FM 3-0, FM 3-34, and FM 6-0, and Field Manual Interim (FMI) 5-0.1. This manual will serve as a reference document for engineer commanders and staff, leaders, training developers, and doctrine developers throughout the Army and Marine Corps. It will also provide guidance to commanders for the employment of engineer reconnaissance capabilities in support of all operations. It is also the primary reference for engineer reconnaissance for Joint Publication (JP) 3-34. This FM has an introduction and six chapters. It includes significant discussion on integrating the planning for engineer reconnaissance support within the planning doctrine in FM 5-0 and the command and control (C2) doctrine in FM 6-0. The introduction expands upon the manual's purpose and summarizes the doctrinal changes it contains. Chapter 1 provides a doctrinal framework for the provision of engineer reconnaissance capabilities resident within engineer functions and supporting the warfighting functions, describes a range of tactical to technical engineer reconnaissance capabilities, and provides capabilities and limitations of the engineer reconnaissance team (ERT). Chapter 2 provides doctrine for integrating the planning for engineer reconnaissance within information management and planning processes of the combined arms team. It specifically addresses integration of geospatial support and provides specific C2 considerations for integration of engineer reconnaissance. Chapter 3 provides doctrine for integrating the application of engineer reconnaissance within tactical reconnaissance operations of the combined arms team. It also addresses considerations for the sustainment of engineer reconnaissance elements. Chapter 4 provides doctrine for the conduct of ERT operations providing engineer reconnaissance support at the tactical end of the range described in Chapter 1. ERTs conduct zone, area, and route reconnaissance with a specified additional focus on required technical information. Chapters 5 and 6 provide doctrine for the conduct of engineer assessments and surveys which provide engineer reconnaissance support at the technical end of the range described in Chapter 1. Assessment and survey teams conduct reconnaissance specifically focused on collecting detailed technical information. Appendix B illustrates the preparation of required engineer reconnaissance reports and forms. Appendix C incorporates the smartcard tools developed for infrastructure assessment. Appendix D provides the environmental baseline assessment tool. Appendix H includes a collection of other useful tools and resources.
Download or read book Field Manual FM 3 34 Engineer Operations April 2014 written by United States Government US Army and published by CreateSpace. This book was released on 2015-08-23 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication, Field Manual FM 3-34 Engineer Operations April 2014, is the Army doctrine publication that presents the overarching doctrinal guidance and direction for conducting engineer activities and shows how it contributes to decisive action. It provides a common framework and language for engineer support to operations and constitutes the doctrinal foundation for developing other fundamentals and tactics, techniques, and procedures detailed in subordinate doctrine manuals. This manual is a key integrating publication that links the doctrine for the Engineer Regiment with Army capstone doctrine and joint doctrine. It focuses on synchronizing and coordinating the diverse range of capabilities in the Engineer Regiment to support the Army and its mission successfully. FM 3-34 provides operational guidance for engineer commanders and trainers at all echelons and forms the foundation for United States (U.S.) Army Engineer School curricula. FM 3-34 applies to Army engineer forces. The principal audience for this manual is engineer commanders and staff officers, but all Army leaders will benefit from reading it. Trainers, educators, and combat developers throughout the Army also use this manual.