Download or read book Commercial Aircraft Propulsion and Energy Systems Research written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-08-09 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary human activities that release carbon dioxide (CO2) into the atmosphere are the combustion of fossil fuels (coal, natural gas, and oil) to generate electricity, the provision of energy for transportation, and as a consequence of some industrial processes. Although aviation CO2 emissions only make up approximately 2.0 to 2.5 percent of total global annual CO2 emissions, research to reduce CO2 emissions is urgent because (1) such reductions may be legislated even as commercial air travel grows, (2) because it takes new technology a long time to propagate into and through the aviation fleet, and (3) because of the ongoing impact of global CO2 emissions. Commercial Aircraft Propulsion and Energy Systems Research develops a national research agenda for reducing CO2 emissions from commercial aviation. This report focuses on propulsion and energy technologies for reducing carbon emissions from large, commercial aircraftâ€" single-aisle and twin-aisle aircraft that carry 100 or more passengersâ€"because such aircraft account for more than 90 percent of global emissions from commercial aircraft. Moreover, while smaller aircraft also emit CO2, they make only a minor contribution to global emissions, and many technologies that reduce CO2 emissions for large aircraft also apply to smaller aircraft. As commercial aviation continues to grow in terms of revenue-passenger miles and cargo ton miles, CO2 emissions are expected to increase. To reduce the contribution of aviation to climate change, it is essential to improve the effectiveness of ongoing efforts to reduce emissions and initiate research into new approaches.

Download or read book Technologies and Approaches to Reducing the Fuel Consumption of Medium and Heavy Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2010-07-30 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.

Download or read book Fossil Energy Update written by and published by . This book was released on 1982 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ANL CNSV written by and published by . This book was released on 1981 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Holistic Approach to Ship Design written by Apostolos Papanikolaou and published by Springer. This book was released on 2018-12-11 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a holistic approach to ship design and its optimisation for life-cycle operation. It deals with the scientific background of the adopted approach and the associated synthesis model, which follows modern computer aided engineering (CAE) procedures. It integrates techno-economic databases, calculation and multi-objective optimisation modules and s/w tools with a well-established Computer-Aided Design (CAD) platform, along with a Virtual Vessel Framework (VVF), which will allow virtual testing before the building phase of a new vessel. The resulting graphic user interface (GUI) and information exchange systems enable the exploration of the huge design space to a much larger extent and in less time than is currently possible, thus leading to new insights and promising new design alternatives. The book not only covers the various stages of the design of the main ship system, but also addresses relevant major onboard systems/components in terms of life-cycle performance to offer readers a better understanding of suitable outfitting details, which is a key aspect when it comes the outfitting-intensive products of international shipyards. The book disseminates results of the EU funded Horizon 2020 project HOLISHIP.

Download or read book Energy and Fuel Systems Integration written by Yatish T. Shah and published by CRC Press. This book was released on 2015-10-15 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy and Fuel Systems Integration explains how growing energy and fuel demands, paired with the need for environmental preservation, require different sources of energy and fuel to cooperate and integrate with each other rather than simply compete. Providing numerous examples of energy and fuel systems integration success stories, this book: Discusses the use of different mixtures of fuels for combustion, gasification, liquefaction, pyrolysis, and anaerobic digestion processes Describes the use of hybrid nuclear and renewable energy systems for power and heat cogenerations with nonelectrical applications Details the holistic integration of renewable, nuclear, and fossil energy systems by gas, heat, and smart electrical grids Energy and Fuel Systems Integration emphasizes the many advantages of these integrated systems, including sustainability, flexibility for optimization and scale-up, and more efficient use of storage, transportation, and delivery infrastructures.

Download or read book Pounder s Marine Diesel Engines and Gas Turbines written by Malcolm Latarche and published by Butterworth-Heinemann. This book was released on 2020-12-01 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pounder's Marine Diesel Engines and Gas Turbines, Tenth Edition, gives engineering cadets, marine engineers, ship operators and managers insights into currently available engines and auxiliary equipment and trends for the future. This new edition introduces new engine models that will be most commonly installed in ships over the next decade, as well as the latest legislation and pollutant emissions procedures. Since publication of the last edition in 2009, a number of emission control areas (ECAs) have been established by the International Maritime Organization (IMO) in which exhaust emissions are subject to even more stringent controls. In addition, there are now rules that affect new ships and their emission of CO2 measured as a product of cargo carried. - Provides the latest emission control technologies, such as SCR and water scrubbers - Contains complete updates of legislation and pollutant emission procedures - Includes the latest emission control technologies and expands upon remote monitoring and control of engines

Download or read book Introduction to Electric Drives written by Ishwar Singh and published by Pencil. This book was released on 2024-05-17 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, "Introduction to Electric Drives," is written to offer readers a background walkthrough from which they will have an ample understanding of electric drive systems and their uses in different industries. This book is an inseparable source for students, apprentices, researchers, developers, and specialists hunting for new knowledge on electric drives. Less commonly, electronic drives are used in electric motor applications in the industry, in infrastructure and transport networks, as well as in renewable energy and electronics. Knowledge of electric drive principles, construction, and operation is required of those whose tasks are to design, implement, or support electric drive electrical systems.

Download or read book Handbook of Clean Energy Systems 6 Volume Set written by Jinyue Yan and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 4038 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Clean Energy Systems brings together an international team of experts to present a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems. Consolidating information which is currently scattered across a wide variety of literature sources, the handbook covers a broad range of topics in this interdisciplinary research field including both fossil and renewable energy systems. The development of intelligent energy systems for efficient energy processes and mitigation technologies for the reduction of environmental pollutants is explored in depth, and environmental, social and economic impacts are also addressed. Topics covered include: Volume 1 - Renewable Energy: Biomass resources and biofuel production; Bioenergy Utilization; Solar Energy; Wind Energy; Geothermal Energy; Tidal Energy. Volume 2 - Clean Energy Conversion Technologies: Steam/Vapor Power Generation; Gas Turbines Power Generation; Reciprocating Engines; Fuel Cells; Cogeneration and Polygeneration. Volume 3 - Mitigation Technologies: Carbon Capture; Negative Emissions System; Carbon Transportation; Carbon Storage; Emission Mitigation Technologies; Efficiency Improvements and Waste Management; Waste to Energy. Volume 4 - Intelligent Energy Systems: Future Electricity Markets; Diagnostic and Control of Energy Systems; New Electric Transmission Systems; Smart Grid and Modern Electrical Systems; Energy Efficiency of Municipal Energy Systems; Energy Efficiency of Industrial Energy Systems; Consumer Behaviors; Load Control and Management; Electric Car and Hybrid Car; Energy Efficiency Improvement. Volume 5 - Energy Storage: Thermal Energy Storage; Chemical Storage; Mechanical Storage; Electrochemical Storage; Integrated Storage Systems. Volume 6 - Sustainability of Energy Systems: Sustainability Indicators, Evaluation Criteria, and Reporting; Regulation and Policy; Finance and Investment; Emission Trading; Modeling and Analysis of Energy Systems; Energy vs. Development; Low Carbon Economy; Energy Efficiencies and Emission Reduction. Key features: Comprising over 3,500 pages in 6 volumes, HCES presents a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems, consolidating a wealth of information which is currently scattered across a wide variety of literature sources. In addition to renewable energy systems, HCES also covers processes for the efficient and clean conversion of traditional fuels such as coal, oil and gas, energy storage systems, mitigation technologies for the reduction of environmental pollutants, and the development of intelligent energy systems. Environmental, social and economic impacts of energy systems are also addressed in depth. Published in full colour throughout. Fully indexed with cross referencing within and between all six volumes. Edited by leading researchers from academia and industry who are internationally renowned and active in their respective fields. Published in print and online. The online version is a single publication (i.e. no updates), available for one-time purchase or through annual subscription.

Download or read book Hybrid Energy Systems written by Yatish T. Shah and published by CRC Press. This book was released on 2021-04-04 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Energy Systems: Strategy for Industrial Decarbonization demonstrates how hybrid energy and processes can decarbonize energy industry needs for power and heating and cooling. It describes the role of hybrid energy and processes in nine major industry sectors and discusses how hybrid energy can offer sustainable solutions in each. Introduces the basics and examples of hybrid energy systems Examines hybrid energy and processes in coal, oil and gas, nuclear, building, vehicle, manufacturing and industrial processes, computing and portable electronic, district heating and cooling, and water sectors Shows that hybrid processes can improve efficiency and that hybrid energy can effectively insert renewable fuels in the energy industry Serves as a companion text to the author’s book Hybrid Power: Generation, Storage, and Grids Written for advanced students, researchers, and industry professionals involved in energy-related processes and plants, this book offers latest research and practical strategies for application of the innovative field of hybrid energy.

Download or read book Marine Auxiliary Machinery written by H. D. McGeorge and published by Elsevier. This book was released on 2013-10-22 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine Auxiliary Machinery, Seventh Edition is a 16-chapter text that covers the significant advances in marine auxiliary machinery relevant to the certification of competency examinations. The introductory chapters deal with the basic components of marine machineries, such as propulsion system, heat exchanger, valves, and pipelines. The succeeding chapters describe the pumps and pumping system, specifically the tanker and gas carrier cargo pumps. Considerable chapters are devoted to the operation of machinery's major components, including the propeller shaft, steering gear, auxiliary power, bow thrusters, and stabilizers. Other chapters consider the refrigeration, heating, ventilation, and air conditioning systems. The final chapters tackle the safety system of marine auxiliary machinery, particularly the fire protection, safety, instrumentation, and control systems. This book will prove useful to marine and mechanical engineers.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Efficiency in Shipping for Environmental Sustainability written by Ashok Menon and published by Taylor & Francis. This book was released on 2024-10-29 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the environmental impact of emissions from ships, setting out the mandatory regulations of MARPOL 73/78 and the Shipboard Energy Efficiency Management Plan, as well as new International Maritime Organization regulations such as MEPC 80. Chapters provide an in-depth understanding of how ship staff can increase energy efficiency by reducing fuel consumption and using innovative technologies. Comprehensive coverage of energy audit methodology is offered to ensure compliance with energy efficiency requirements. Written accessibly to suit a wide range of readers in the shipping industry, the book will be especially valuable for ship officers as well as trainees and cadets.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1987 with total page 1176 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Turbocharged Racing Engines written by Alberto Boretti and published by SAE International. This book was released on 2019-03-07 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Racing continues to provide the preeminent directive for advancing powertrain development for automakers worldwide. Formula 1, World Rally, and World Endurance Championship all provide engineering teams the most demanding and rigorous testing opportunities for the latest engine and technology designs. Turbocharging has seen significant growth in the passenger car market after years of development on racing circuits. Advances in Turbocharged Racing Engines combines ten essential SAE technical papers with introductory content from the editor on turbocharged engine use in F1, WRC, and WEC-recognizing how forced induction in racing has impacted production vehicle powertrains. Topics featured in this book include: Fundamental aspects of design and operation of turbocharged engines Electric turbocharger usage in F1 Turbocharged engine research by Toyota, SwRI and US EPA, Honda, and Caterpillar This book provides a historical and relevant insight into research and development of racing engines. The goal is to provide the latest advancements in turbocharged engines through examples and case studies that will appeal to engineers, executives, instructors, students, and enthusiasts alike.

Download or read book Energy Environmental Systems Division EES Publications 1968 1986 written by Argonne National Laboratory. Energy and Environmental Systems Division and published by . This book was released on 1986 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Unsettled Technology Areas in Electric Propulsion Systems written by Yuxiang Jiang and published by SAE International. This book was released on 2021-05-24 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric vehicle (EV) transmission technology—crucial for battery electric vehicles (BEVs) and hybrid electric vehicles (HEVs)—is developing quickly and customers want good performance at a low cost. Single-speed gearboxes are popular in electric drive systems due to their simple and cost-effective configuration. However, multispeed gearboxes are being taken to market due to their higher low-speed torque, dynamic performance, and energy efficiency. Unsettled Technology Areas in Electric Propulsion Systems reviews the economic drivers, existing techniques, and current challenges of EV transmission technology—including torque interruption during shifting; thermal and sealing issues; and noise, vibration, and harshness (NVH). This report discusses the pros and cons for both single-speed and multispeed gearboxes with numerical analysis. Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2021012