Download or read book Energy Demand in Industry written by Nabaz T Khayyat and published by Springer. This book was released on 2015-08-07 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a stochastic analysis based on production risk and application of this method in the industrial sector under production risk where energy use is an input factor. Using South Korea as a case study, the book empirically models energy demand at the industrial level and analyzes the results to identify key determinants of energy demand, productions level, productions risk and energy usage efficiency. Particular attention is paid to the factors that enhance production risk or increase variations in energy input during production. A dynamic panel model is specified and applied to 25 Korean industrial sectors over the period 1970-2007. The determinants of energy usage are identified and their effects in the form of elasticities of energy usage are estimated. In addition the structural changes in the energy demand pattern are explored. Stochastic production technology is applied to create two primary models: A production model where the energy usage is a determinant of output and an energy demand model based on an inverted factor demand model where demand is a key determinant of the level of energy usage. The findings reveal that: First, there are large variations in the degree of overuse or inefficiency in energy usage among the individual industries and over time; second, ICT (information and communication technology) capital and labor are substituting energy; third, ICT capital and value added services are two input factors decreasing the variability of energy demand while non-ICT capital, material and labor are increasing the variability of energy demand. Finally, the results suggest that technical progress contributes more to the increase of mean of energy demand than to the reduction of the level of risk. An emerging recommendation is that industries increase the level of ICT capital and digitalization and invest more in R&D activities and value added services to reduce the uncertainty related to their demand for energy. This study forms the structure of the demand for energy under stochastic production risk for the South Korean industrial sector. Public research programs aimed at the industrial sector should be concerned about both mean and risk properties in research on new technologies and in the investigation of possible alternative energy inputs. This book describes the state of the art in energy usage analysis and production risk, applying factor requirement methodology. It will be of use as a main or supplementary text in the teaching of advanced graduate courses but also as a reference for those working on empirically advanced research. The book is an important addition to the existing literature on industrial development, with its focus on energy as a core production input.
Download or read book The Changing Structure of American Industry and Energy Use Patterns written by Ahmad Faruqui and published by Routledge. This book was released on 1987 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Survey of Manufactures written by and published by . This book was released on 1980 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Forecasting U S Electricity Demand written by Adela Maria Bolet and published by Routledge. This book was released on 2019-08-30 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the energy headlines of 1985 proclaim the waning of OPEC, the collapse of oil prices, and the demise of the nuclear power industry, few policy analysts are examining the dynamic challenges and opportunities that may confront the electric power industry during the remainder of this century. In this pioneering work, Adela Maria Bolet attempts to do exactly this, namely, to reconcile the differences among forecasters as to the future of electricity demand in the industrial, commercial, and residential sectors.
Download or read book Energy Supply and Demand written by David B. Rutledge and published by Cambridge University Press. This book was released on 2019-12-12 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores trends and projections in energy supply and demand using real-life case studies and modeling techniques.
Download or read book Electricity Demand by Manufacturing Industries in the United States Energy Division written by Wen S. Chern and published by . This book was released on 1975 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Real Prospects for Energy Efficiency in the United States written by National Research Council and published by National Academies Press. This book was released on 2010-06-10 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: America's economy and lifestyles have been shaped by the low prices and availability of energy. In the last decade, however, the prices of oil, natural gas, and coal have increased dramatically, leaving consumers and the industrial and service sectors looking for ways to reduce energy use. To achieve greater energy efficiency, we need technology, more informed consumers and producers, and investments in more energy-efficient industrial processes, businesses, residences, and transportation. As part of the America's Energy Future project, Real Prospects for Energy Efficiency in the United States examines the potential for reducing energy demand through improving efficiency by using existing technologies, technologies developed but not yet utilized widely, and prospective technologies. The book evaluates technologies based on their estimated times to initial commercial deployment, and provides an analysis of costs, barriers, and research needs. This quantitative characterization of technologies will guide policy makers toward planning the future of energy use in America. This book will also have much to offer to industry leaders, investors, environmentalists, and others looking for a practical diagnosis of energy efficiency possibilities.
Download or read book Real Prospects for Energy Efficiency in the United States written by National Research Council and published by National Academies Press. This book was released on 2010-07-10 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: America's economy and lifestyles have been shaped by the low prices and availability of energy. In the last decade, however, the prices of oil, natural gas, and coal have increased dramatically, leaving consumers and the industrial and service sectors looking for ways to reduce energy use. To achieve greater energy efficiency, we need technology, more informed consumers and producers, and investments in more energy-efficient industrial processes, businesses, residences, and transportation. As part of the America's Energy Future project, Real Prospects for Energy Efficiency in the United States examines the potential for reducing energy demand through improving efficiency by using existing technologies, technologies developed but not yet utilized widely, and prospective technologies. The book evaluates technologies based on their estimated times to initial commercial deployment, and provides an analysis of costs, barriers, and research needs. This quantitative characterization of technologies will guide policy makers toward planning the future of energy use in America. This book will also have much to offer to industry leaders, investors, environmentalists, and others looking for a practical diagnosis of energy efficiency possibilities.
Download or read book Energy Demand Facts and Trends written by B. Chateau and published by Springer. This book was released on 2011-12-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fIrst oil crisis of 1973-74 and the questions it raised in the economic and social fIelds drew attention to energy issues. Industrial societies, accustomed for two decades or more to energy sufficiently easy to produce and cheap to consume that it was thought to be inexhaustible, began to question their energy future. The studies undertaken at that time, and since, on a national, regional, or world level were over-optimistic. The problem seemed simple enough to solve. On the one hand, a certain number of resources: coal, the abundance of which was discovered, or rather rediscovered oil, source of all the problems ... In fact, the problems seemed to come, if not from oil itself (an easy explanation), then from those who produced it without really owning it, and from those who owned it without really control ling it natural gas, second only to oil and less compromised uranium, all of whose promises had not been kept, but whose resources were not in question solar energy, multiform and really inexhaustible thermonuclear fusion, and geothermal energy, etc. On the other hand, energy consumption, though excessive perhaps, was symbolic of progress, development, and increased well being. The originality of the energy policies set up since 1974 lies in the fact they no longer aimed to produce (or import) more, but to consume less. They sought, and still seek, what might be emphatically called the control of energy consump tion, or rather the control of energy demand.
Download or read book Energy Management in Industry written by David Thorpe and published by Routledge. This book was released on 2013-12-17 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy demand reduction is fast becoming a business activity for all companies and organisations because it can increase profits regardless of the nature of their core activity. The International Energy Agency believes that industry could improve its energy efficiency and reduce carbon dioxide emissions by almost a third using the best available practices and technologies. This guide looks at the many ways available to energy managers to achieve or even exceed this level of performance, including: base-lining consumption planning a monitoring and verification strategy metering (including smart, wireless metering) energy supply management motors and drives compressed air and process controls. Uniquely, it includes a whole chapter on greening data centres. It also looks at topics covered in greater detail in its companion volume, Energy Management in Buildings: insulation, lighting, renewable heating, cooling and HVAC systems. Further chapters examine minimising water use and how to make the financial case, both to prioritise measures for cost effectiveness, and to get management on board. This title is aimed at all professional energy, industry and facilities managers, energy consultants, students, trainees and academics and can be read alongside training for ISO 50001 - Energy Management Systems. It takes the reader from basic concepts to the latest advanced thinking, with principles applicable anywhere in the world and in any climate.
Download or read book International Energy Outlook written by and published by . This book was released on 1986 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Demand and Planning written by J.C. McVeigh and published by CRC Press. This book was released on 2003-09-02 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy, Demand and Planning brings together a group of distinguished authors from many relevant disciplines, under the auspices of the Watt Committee on Energy. The authors were asked to consider the effects of policy decisions that might be taken now on the planning of the world energy industries in the coming half-century or so. Discussion is held on such key topics as technological change, sustainable development, global warming and the effects of population growth, all of which require policy decisions at national and international levels, affecting the daily lives of people in both advanced and developing countries.
Download or read book Energy Demand And Economic Growth written by Corazon M Siddayao and published by Taylor & Francis. This book was released on 2021-11-28 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author examines the measurement and conceptual issues that complicate analytical work in the energy demand field. Successful policy decisions depend on the use of appropriate data and analytic methods; because the demand side of the energy-economy interaction is highly complex, this study focuses on the more basic economic and energy concepts and methods in demand analyses. He critiques measures used to analyze the relationship of energy to economic growth and summarizes the various demand estimation methods and their results. Highlighting the problems faced by analysts in developing countries who often have limited time and inadequate data, she discusses the serious implications of basing policy decisions on questionable analytic methods and data.
Download or read book Current and Future Industrial Energy Service Characterizations Volume II Energy Data on the US Manufacturing Subsector written by and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to characterize industrial energy service, current energy demand, its end uses, and cost of typical energy applications and resultant services in the industrial sector were examined and a projection of state industrial energy demands and prices to 1990 was developed. Volume II presents in Section 2 data on the US manufacturing subsector energy demand, intensity, growth rates, and cost for 1971, 1974, and 1976. These energy data are disaggregated not only by fuel type but also by user classifications, including the 2-digit SIC industry groups, 3-digit subgroups, and 4-digit SIC individual industries. These data characterize typical energy applications and the resultant services in this subsector. The quantities of fuel and electric energy purchased by the US manufacturing subsector were converted to British thermal units and reported in billions of Btu. The conversion factors are presented in Table 4-1 of Volume I. To facilitate the descriptive analysis, all energy cost and intensity data were expressed in constant 1976 dollars. The specific US industrial energy service characteristics developed and used in the descriptive analysis are presented in Volume I. Section 3 presents the computer program used to produce the tabulated data.
Download or read book Industrial Energy Use written by United States. Congress. Office of Technology Assessment and published by . This book was released on 1983 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Consumption in Manufacturing written by Conference Board and published by . This book was released on 1974 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monograph on the results of a research project to determine and explain trends in power consumption in six manufacturing industries in the USA - identifies changes in production processes and technology which have affected energy use in the past, and includes projections of technological changes and other changes likely to affect energy use up to 1980. Graphs, references and statistical tables.
Download or read book Sustainability in the Chemical Industry written by National Research Council and published by National Academies Press. This book was released on 2005-11-21 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through innovative design, creation, processing, use, and disposal of substances, the chemical industry plays a major role in advancing applications to support sustainability in a way that will allow humanity to meet current environmental, economic, and societal needs without compromising the progress and success of future generations. Based on a workshop held in February 2005 that brought together a broad cross section of disciplines and organizations in the chemical industry, this report identifies a set of overarching Grand Challenges for Sustainability research in chemistry and chemical engineering to assist the chemical industry in defining a sustainability agenda. These Grand Challenges include life cycle analysis, renewable chemical feedstocks, and education, among others.
