Download or read book Energy Efficiency in Buildings written by José Manuel Andújar and published by MDPI. This book was released on 2020-04-28 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Buildings are one of the main causes of the emission of greenhouse gases in the world. Europe alone is responsible for more than 30% of emissions, or about 900 million tons of CO2 per year. Heating and air conditioning are the main cause of greenhouse gas emissions in buildings. Most buildings currently in use were built with poor energy efficiency criteria or, depending on the country and the date of construction, none at all. Therefore, regardless of whether construction regulations are becoming stricter, the real challenge nowadays is the energy rehabilitation of existing buildings. It is currently a priority to reduce (or, ideally, eliminate) the waste of energy in buildings and, at the same time, supply the necessary energy through renewable sources. The first can be achieved by improving the architectural design, construction methods, and materials used, as well as the efficiency of the facilities and systems; the second can be achieved through the integration of renewable energy (wind, solar, geothermal, etc.) in buildings. In any case, regardless of whether the energy used is renewable or not, the efficiency must always be taken into account. The most profitable and clean energy is that which is not consumed.

Download or read book Real Prospects for Energy Efficiency in the United States written by National Research Council and published by National Academies Press. This book was released on 2010-06-10 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: America's economy and lifestyles have been shaped by the low prices and availability of energy. In the last decade, however, the prices of oil, natural gas, and coal have increased dramatically, leaving consumers and the industrial and service sectors looking for ways to reduce energy use. To achieve greater energy efficiency, we need technology, more informed consumers and producers, and investments in more energy-efficient industrial processes, businesses, residences, and transportation. As part of the America's Energy Future project, Real Prospects for Energy Efficiency in the United States examines the potential for reducing energy demand through improving efficiency by using existing technologies, technologies developed but not yet utilized widely, and prospective technologies. The book evaluates technologies based on their estimated times to initial commercial deployment, and provides an analysis of costs, barriers, and research needs. This quantitative characterization of technologies will guide policy makers toward planning the future of energy use in America. This book will also have much to offer to industry leaders, investors, environmentalists, and others looking for a practical diagnosis of energy efficiency possibilities.

Download or read book HUD Rehabilitation Energy Guidelines for Multi family Dwellings written by and published by . This book was released on 1996 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Economics of Energy Efficiency written by Steve Sorrell and published by Edward Elgar Publishing. This book was released on 2004 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines energy management practices within a wide range of public and private sector organisations.

Download or read book Energy Conservation for Housing written by and published by . This book was released on 1998 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Codes written by International Code Council and published by . This book was released on 1999 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Improving Energy Efficiency in Industrial Energy Systems written by Patrik Thollander and published by Springer Science & Business Media. This book was released on 2012-08-10 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial energy efficiency is one of the most important means of reducing the threat of increased global warming. Research however states that despite the existence of numerous technical energy efficiency measures, its deployment is hindered by the existence of various barriers to energy efficiency. The complexity of increasing energy efficiency in manufacturing industry calls for an interdisciplinary approach to the issue. Improving energy efficiency in industrial energy systems applies an interdisciplinary perspective in examining energy efficiency in industrial energy systems, and discusses how “cross-pollinating” perspectives and theories from the social and engineering sciences can enhance our understanding of barriers, energy audits, energy management, policies, and programmes as they pertain to improved energy efficiency in industry. Apart from classical technical approaches from engineering sciences, Improving energy efficiency in industrial energy systems couples a sociotechnical perspective to increased energy efficiency in industry, showing that industrial energy efficiency can be expected to be shaped by social and commercial processes and built on knowledge, routines, institutions, and methods established in networks. The book can be read by researchers and policy-makers, as well as scholars and practicians in the field. “This book is extremely valuable for anyone who is designing or executing energy efficiency policies, schemes or projects aiming at SMEs. Both authors deserve the highest respect, and the combination of their expertise makes the results truly unique.” - Daniel Lundqvist, programme manager at the Swedish energy agency “For anyone interested in improving energy efficiency in industry, this is a must-read. The book combines tools from social science and engineering to discuss the state of art today as well as possible development path tomorrow. This is a compelling book that I find useful both in my teaching and my research.” - Kajsa Ellegård, Professor at Linköping University, Sweden "The book Improving energy efficiency in industrial energy systems is a novel approach on how improved levels of energy efficiency can be reached in industrial energy systems by merging engineering with social sciences. It is with delight that I can recommend their book to anyone interested in the field.”- Mats Söderström, Director Energy Systems Programme, Linköping University, Sweden

Download or read book Florida Building Code Energy Conservation 7th Edition 2020 written by Florida Building Commission and published by . This book was released on 2020-07 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The 7th Edition (2020) update to the Florida Building Code: Energy Conservation is a fully integrated publication that updates the 6th Edition 2017 Florida Building Code: Energy Conservation using the latest changes to the 2018 International Energy Conservation Code® with customized amendments adopted statewide. Chapter tabs are also included. Effective Date: December 31, 2020

Download or read book Buildings Energy Conservation written by and published by . This book was released on 1986 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Efficiency of Buildings in Cities written by United States. Congress. Office of Technology Assessment and published by . This book was released on 1982 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy renovation of multi family buildings in Sweden written by Lina La Fleur and published by Linköping University Electronic Press. This book was released on 2019-09-18 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residential buildings account for 27% of the final energy use in the European Union. In cold climates, space heating represents the largest proportion of the energy demand in residential buildings. By implementing energy efficiency measures (EEMs) in existing buildings, energy use can be significantly reduced. The Energy Performance of Buildings Directive states that renovations of buildings offer an opportunity to improve energy efficiency. Renovations that include measures implemented with the specific purpose of reducing energy use are referred to as energy renovations. In addition to improving energy efficiency, an energy renovation can also improve the indoor environment. Sweden, like many other European countries, faces the challenge of renovating an ageing building stock with poor energy performance. Improving energy efficiency and performing energy renovations in a cost-effective manner is central, and optimization approaches are often used to identify suitable EEMs and energy renovation approaches. New buildings usually feature better energy performance compared to older buildings, and one approach for reducing energy use in the building sector could be to demolish old buildings with poor thermal performance and build new buildings with better thermal performance. The aim of this thesis is to evaluate energy renovations of multi-family buildings with regard to space heating demand, life cycle costs, indoor environment and primary energy use. The choice between energy renovation of a multi-family building and the demolition and construction of a new one is also investigated with regard to life cycle costs (LCCs). A Swedish multi-family building in which energy renovation has been carried out is used as a case study. The building was originally constructed in 1961 and has a lightweight concrete construction. The renovation included improving the thermal performance of the building envelope and replacing the exhaust air ventilation system with a mechanical supply and exhaust air ventilation system with heat recovery. The methods used in the studies include dynamic whole building energy simulation, life cycle cost analysis and optimizations, and a questionnaire on indoor environment perception. Extensive field measurements have been performed in the building prior to and after renovation to provide input data and to validate numerical predictions. In addition to the studied building, the analysis of the choice between energy renovation and the demolition and construction of a new building includes three other building construction types, representing common Swedish building types from the 1940s, 1950s and 1970s. The analysis shows that the energy renovation led to a 44% reduction in space heating demand and an improved indoor environment. The indoor temperature was higher after the renovation and the perception of the indoor temperature, air quality and noise in the building improved. The EEMs implemented as part of the energy renovation have a slightly higher LCC than the optimal combinations of EEMs identified in the LCC optimization. It is not cost-optimal to implement any EEMs in the building if the lowest possible LCC is the objective function. Attic insulation has a low cost of implementation but has limited potential in the studied building with its relatively good thermal properties. Insulation of the façade is an expensive measure, but has a great potential to reduce heat demand because of the large façade area. Façade insulation is thus required to achieve significant energy savings. Heat recovery in the ventilation system is cost-effective with an energy saving target above 40% in the studied building. The primary energy factors in the Swedish Building Code favor ground source heat pumps as a heat supply system in the studied building. The LCC of renovation is lower compared to demolishing and constructing a new building. A large proportion of the LCC of demolition and new construction relates to the demolition of the existing building. In a building with a high internal volume to floor area ratio, it is not always possible to renovate to the same energy performance level as when constructing a new building. A more ambitious renovation approach is also needed compared to a building with a smaller volume to floor area ratio. Nära 27 % av den totala energianvändningen i den Europeiska Unionen sker i bostäder. I länder med kallt klimat används den största delen till uppvärmning. Genom att implementera energieffektiviseringsåtgärder i befintliga byggnaden kan energiprestandan signifikant förbättras. Europeiska Unionens direktiv om byggnaders energiprestanda framhåller att ett tillfälle att förbättra byggnaders energieffektivitet finns då byggnader ska renoveras. Byggnadsrenoveringar som innehåller åtgärder som implementeras med det primära syftet att minska energianvändningen kallas ofta energirenoveringar. Utöver energieffektivisering kan energirenoveringar ofta förbättra inomhusmiljön i byggnaden. Som många andra Europeiska länder står Sverige inför utmaningen att renovera ett åldrande byggnadsbestånd med låg energiprestanda. Kostnadseffektivitet är centralt vid energirenoveringar och energieffektivisering och optimeringsansatser är vanliga för att identifiera vilka energieffektiviseringsåtgärder som bör implementeras. Nya byggnader har som regel bättre energiprestanda jämfört med äldre byggnader, och en ansats till ett minska energianvändningen i byggnadssektorn överlag är således att riva äldre byggnader med låg energiprestanda och konstruera nya byggnader med bättre energiprestanda. Syftet med denna avhandling är att utvärdera energirenoveringar av flerfamiljshus avseende effekterna på uppvärmningsbehov, livscykelkostnader, inomhusmiljö och primärenergianvändning. Valet mellan energirenovering kontra att riva och bygga en ny byggnad analyseras också utifrån ett livscykelkostnadsperspektiv. För att studera detta har en svensk flerfamiljsbyggnad som genomgått energirenovering studerats. Byggnaden konstruerades 1961 och har en lättbetongstomme. När byggnaden renoverades förbättrades prestandan hos byggnadens klimatskal och frånluftsventilationssystemet byttes ut mot ett balanserat mekanisk ventilationssystem med värmeåtervinning. Metoderna som använts i studierna i denna avhandling är dynamisk byggandssimulering, beräkning och optimering av livscykelkostnader, samt en enkätstudie om hur de boende uppfattar sin inomhusmiljö. Omfattande mätningar har utförts i byggnaden och har använts som indata och för att validera resultaten. Utöver den studerade byggnaden har tre andra byggnadstyper inkluderats i analysen av valet mellan energirenovering och att riva och konstruera en ny byggnads. Dessa byggnadstyper representerar vanliga svenska byggnadstyper från 1940-, 1950- och 1970-talet. Analyserna visar att den renovering som genomfördes i byggnaden ledde till en minskning av uppvärmningsbehovet med 44 % och en förbättring av inomhusmiljön. Inomhustemperaturen var högre efter renoveringen, och de boende uppfattade temperaturförhållanden, luftkvalitet och bullersituationen som bättre efter renoveringen. De energieffektiviserande åtgärder som implementerades vid renoveringen gav en något högre livscykelkostnad än de åtgärder som identifierades som optimala genom livscykelkostnadsoptimering. Det är inte kostnadseffektivt att implementera några energieffektiviseringsåtgärder som del av renoveringen om den lägsta livscykelkostnaden är målsättningen. Vindsisolering är en förhållandevis billigt åtgärd att genomföra, men har begränsad potential i den studerade byggnaden vars vind redan har relativt god termisk prestanda. Fasadisolering kräver en större investering, men har större potential att minska energianvändning på grund av den stora fasadytan. Detta innebär att det är nödvändigt att isolera fasaden för att uppnå hög energibesparing. Värmeåtervinning i ventilationssystemet är kostnadsoptimalt om ett energisbesparingsmål på mer än 40 % ställs på energirenoveringen. Primärenergifaktorerna i den svenska byggnadskoden gynnar bergvärmepump som energitillförselsystem i de studerade byggnaden. Kostnaden för att energirenovera är lägre än att riva och bygga en ny byggnad. En stor andel av kostnaderna vid rivning och nybyggnation är kopplad till rivning och bortforsling av rivningsmassa. I byggnadstyper med stor inre volym i förhållande till uppvärmd golvyta är det inte alltid möjlig att energirenovera till en energiprestanda som är lika god som en ny byggnad. Det krävs också en mer ambitiös renovering för att uppnå samma energiprestanda som en byggnad med mindre inre volym i förhållande till uppvärmd golvyta.

Download or read book Energy Efficiency of Buildings in Cities written by and published by DIANE Publishing. This book was released on 1982 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Solar Energy Update written by and published by . This book was released on 1978 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Conservation in Federal and Federally Assisted Buildings written by United States. Congress. Senate. Committee on Public Works. Subcommittee on Public Buildings and Grounds and published by . This book was released on 1975 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Abstracts for Policy Analysis written by and published by . This book was released on 1979 with total page 1106 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Research Abstracts written by and published by . This book was released on 1987 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Summary of International Energy Research and Development Activities 1974 1976 written by Sam Stuart and published by Elsevier. This book was released on 2013-10-22 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summary of International Energy Research and Development Activities 1974–1976 is a directory of energy research and development projects conducted in various countries such as Canada, Italy, Germany, France, Sweden, and the United Kingdom between 1974 and 1976. A limited number of projects sponsored by international organizations such as the International Atomic Energy Agency are also included. This directory consists of nine chapters and opens with a section on organic sources of energy such as coal, oil and gas, peat, hydrocarbons, and non-fossil organic sources. The next sections focus on thermonuclear energy and plasma physics; fission sources and energy production; geophysical energy sources; conversion technology; and environmental aspects of energy conversion and use. Energy transport, transmission, utilization, and conservation are also covered. The final chapter deals with energy systems and other energy-related research on subjects ranging from car sharing and urban passenger transport to nuclear power plants, energy supply and demand models, and high-power molecular lasers. This monograph will be a valuable resource of information for those involved in energy research and development.