Download or read book Energy beam Processing of Materials written by Norio Taniguchi and published by Oxford University Press, USA. This book was released on 1989 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.
Download or read book Ion Beam Processing of Materials and Deposition Processes of Protective Coatings written by P.L.F. Hemment and published by Newnes. This book was released on 2012-12-02 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing the proceedings of three symposia in the E-MRS series this book is divided into two parts. Part one is concerned with ion beam processing, a particularly powerful and versatile technology which can be used both to synthesise and modify materials, including metals, semiconductors, ceramics and dielectrics, with great precision and excellent control. Furthermore it also deals with the correlated effects in atomic and cluster ion bombardment and implantation.Part two deals with the deposition techniques, characterization and applications of advanced ceramic, metallic and polymeric coatings or thin films for surface protection against corrosion, erosion, abrasion, diffusion and for lubrication of contracting surfaces in relative motion.
Download or read book Laser and Electron Beam Processing of Materials written by C.W. White and published by Elsevier. This book was released on 2012-12-02 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser and Electron Beam Processing of Materials contains the papers presented at the symposium on "Laser and Electron Beam Processing of Materials," held in Cambridge, Massachusetts, in November 1979, sponsored by the Materials Research Society. The compilation presents reports and research papers on the use of directed energy sources, such as lasers and electron beams for materials processing. The majority of the materials presented emphasize results on semiconductor materials research. Substantial findings on research on metals, alloys, and other materials are presented as well. Topics covered by the papers include the use of scanned cw sources (both photons and electrons) to recrystallize amorphous layers, enhanced substitutional solubility, solute trapping, zone refining of impurities, and constitutional supercooling. The use of lasers and electron beams to anneal ion implant damage and contacts formation, processing of ion-implanted metals, and surface alloying of films deposited on metallic surfaces are also discussed. Metallurgists, engineers, and materials scientists will find the book very insightful.
Download or read book Industrial Accelerators and Their Applications written by Robert Wray Hamm and published by World Scientific. This book was released on 2012 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique new book is a comprehensive review of the many current industrial applications of particle accelerators, written by experts in each of these fields. Readers will gain a broad understanding of the principles of these applications, the extent to which they are employed, and the accelerator technology utilized. The book also serves as a thorough introduction to these fields for non-experts and laymen. Due to the increased interest in industrial applications, there is a growing interest among accelerator physicists and many other scientists worldwide in understanding how accelerators are used in various applications. The government agencies that fund scientific research with accelerators are also seeking more information on the many commercial applications that have been or can be developed with the technology developments they are funding. Many industries are also doing more research on how they can improve their products or processes using particle beams
Download or read book Ion Beams in Materials Processing and Analysis written by Bernd Schmidt and published by Springer Science & Business Media. This book was released on 2012-12-13 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of ion beam application in modern materials research is provided, including the basics of ion beam physics and technology. The physics of ion-solid interactions for ion implantation, ion beam synthesis, sputtering and nano-patterning is treated in detail. Its applications in materials research, development and analysis, developments of special techniques and interaction mechanisms of ion beams with solid state matter result in the optimization of new material properties, which are discussed thoroughly. Solid-state properties optimization for functional materials such as doped semiconductors and metal layers for nano-electronics, metal alloys, and nano-patterned surfaces is demonstrated. The ion beam is an important tool for both materials processing and analysis. Researchers engaged in solid-state physics and materials research, engineers and technologists in the field of modern functional materials will welcome this text.
Download or read book Physics of Laser Materials Processing written by Gennady G. Gladush and published by Springer Science & Business Media. This book was released on 2011-08-05 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the basic mechanisms, theory, simulations and technological aspects of Laser processing techniques. It covers the principles of laser quenching, welding, cutting, alloying, selective sintering, ablation, etc. The main attention is paid to the quantitative description. The diversity and complexity of technological and physical processes is discussed using a unitary approach. The book aims on understanding the cause-and-effect relations in physical processes in Laser technologies. It will help researchers and engineers to improve the existing and develop new Laser machining techniques. The book addresses readers with a certain background in general physics and mathematical analysis: graduate students, researchers and engineers practicing laser applications.
Download or read book Laser Material Processing written by William M. Steen and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: New chapters on bending and cleaning reflect the changes in the field since the last edition, completing the range of practical knowledge about the processes possible with lasers already familiar to users of this well-known text. Professor Steen's lively presentation is supported by a number of original cartoons by Patrick Wright and Noel Ford, which will bring a smile to your face and ease the learning process. From the reviews: "...well organized, and the text is very practical...The engineering community will find this book informative and useful." (OPTICS AND PHOTONICS NEWS, July/August 2005)
Download or read book Electron Beam Analysis of Materials written by M. H. Loretto and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: The examination of materials using electron beam techniques has developed continuously for over twenty years and there are now many different methods of extracting detailed structural and chemical information using electron beams. These techniques which include electron probe microanalysis, trans mission electron microscopy, Auger spectroscopy and scanning electron microscopy have, until recently, developed more or less independently of each other. Thus dedicated instruments designed to optimize the performance for a specific application have been available and correspondingly most of the available textbooks tend to have covered the theory and practice of an individual technique. There appears to be no doubt that dedicated instru ments taken together with the specialized textbooks will continue to be the appropriate approach for some problems. Nevertheless the underlying electron-specimen interactions are common to many techniques and in view of the fact that a range of hybrid instruments is now available it seems appropriate to provide a broad-based text for users of these electron beam facilities. The aim of the present book is therefore to provide, in a reasonably concise form, the material which will allow the practitioner of one or more of the individual techniques to appreciate and to make use of the type of information which can be obtained using other electron beam techniques.
Download or read book Laser Beam Interactions with Materials written by Martin v. Allmen and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser-Beam Interactions with Materials treats, from a physicist's point of view, the wide variety of processes that lasers can induce in materials. Physical phenomena ranging from optics to shock waves are discussed, as are applications in such diverse fields as semiconductor annealing, hole drilling and fusion plasma production. The approach taken emphasizes the fundamental ideas and their interrelations. The newcomer is given the necessary important background material, while the active research worker finds a critical and comprehensive review of the field.
Download or read book Handbook of Manufacturing Engineering and Technology written by Andrew Y. C. Nee and published by Springer. This book was released on 2014-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Reference Work Handbook of Manufacturing Engineering and Technology provides overviews and in-depth and authoritative analyses on the basic and cutting-edge manufacturing technologies and sciences across a broad spectrum of areas. These topics are commonly encountered in industries as well as in academia. Manufacturing engineering curricula across universities are now essential topics covered in major universities worldwide.
Download or read book Materials Processing by Cluster Ion Beams written by Isao Yamada and published by CRC Press. This book was released on 2015-08-20 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Processing by Cluster Ion Beams: History, Technology, and Applications discusses the contemporary physics, materials science, surface engineering issues, and nanotechnology capabilities of cluster beam processing. Written by the originator of the gas cluster ion beam (GCIB) concept, this book:Offers an overview of ion beam technologies, f
Download or read book Novel Materials Processing by Advanced Electromagnetic Energy Sources written by S. Miyake and published by Elsevier. This book was released on 2005-11-21 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the International Symposium in Novel Materials Processing by Advanced Electromagnetic Energy Sources (MAPEES'04)*Identifies and details recent progress achieved by advanced electromagnetic energy sources in materials processing.*Explores novel approaches to advanced electromagnetic energy processing of materials in an attempt to discover new and unique industrial fields.
Download or read book Radiation Processing of Polymer Materials and Its Industrial Applications written by Keizo Makuuchi and published by John Wiley & Sons. This book was released on 2012-02-07 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text examines the effect of radiation on polymers and the versatility of its industrial applications. By helping readers understand and solve problems associated with radiation processing of polymers, it serves as an important reference and fills a gap in the literature. Radiation processing can significantly improve important properties of polymers, however, there are still misconceptions about processing polymers by using ionizing radiation. This book explains the radiation processing of polymeric materials used in many industrial products including cars, airplanes, computers, and TVs. It even addresses emerging "green" issues like biomaterials and hydrogels.
Download or read book From Instrumentation to Nanotechnology written by J.W. Gardner and published by CRC Press. This book was released on 2024-11-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressed to physical and chemical scientists and engineers, this book provides information on the design, manufacture, and assessment of components with critical dimensions or critical tolerances in the 0.1-100 nanometer range. Such tiny parts are now used in automobile engines, cassette players, and other common products. The 16 lectures presented are from an advanced vacation school on instrumentation and nanotechnology in Warwick, England, September 1990. Among the topics are signal processing, ultrasonic sensors, and nanoactuators for controlled displacements. .
Download or read book Advanced Materials and Processing written by Federal Coordinating Council for Science, Engineering, and Technology. Committee on Industry and Technology and published by . This book was released on 1993 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources
Download or read book New Trends in Ion Beam Processing of Materials and Beam Induced Nanometric Phenomena written by and published by . This book was released on 1997 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt:
