Download or read book Emulsion Polymerisation and Latex Applications written by Christopher D. Anderson and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term latex covers emulsion polymers, polymer dispersions and polymer colloids. This review report provides a general overview of the emulsion polymerisation processes and explains how the resulting latices are used in industrial applications. The classes of emulsion polymers are surveyed and the commercial technologies and potential future uses discussed. An additional indexed section containing several hundred abstracts from the Polymer Library gives useful references for further reading.
Download or read book Chemistry and Technology of Emulsion Polymerisation written by A. M. van Herk and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emulsion polymerisation produces high value polymers in a low cost, environmentally friendly process. The drive to develop environmentally benign production methods for polymers has resulted in widespread development and implementation of the emulsion polymerisation technique. In addition, when combined with novel polymerisation mechanisms the process can give rise to a range of polymer products with particularly useful properties. Emulsion polymerisation is a complex process, governed by the interplay of both chemical and physical properties including polymerisation kinetics and dispersion stability. Successful industrial application relies on understanding and controlling those properties. By carefully explaining the principles of the reaction, based on well-designed experimental investigation, Chemistry and Technology of Emulsion Polymerisation provides a practical and intuitive explanation of emulsion polymerisation. In the development of industrial processes, coupling that understanding with everyday practice can be a further difficult step, so the book emphasises a clear, comprehensive and straightforward discussion to illustrate how the principles relate to practical application. Written for research chemists, technologists and engineers in the polymer, fine and specialty chemicals industries, and in university or government laboratories, this book will be particularly valuable to those early on in their careers. The comprehensive and straightforward coverage will also ensure it is an important resource for advanced courses in emulsion polymerisation.
Download or read book Principles and Applications of Emulsion Polymerization written by Chorng-Shyan Chern and published by John Wiley & Sons. This book was released on 2008-10-06 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-date coverage of methods of emulsion polymerization This book provides a comprehensive reference on emulsion polymerization methods,focusing on the fundamental mechanisms and kinetics of each process, as well as howthey can be applied to the manufacture of environmentally friendly polymeric materials. Topics covered include: Conventional emulsion polymerization Miniemulsion polymerization Microemulsion polymerization Industrial emulsion polymerization processes (primarily the semibatch and continuous reactions systems) The role of various colloidal phenomena in emulsion polymerization Important end-use properties of emulsion polymer (latex) products Information on industrial applications in paints, coatings, adhesives, paper and board, and more This is a hands-on reference for graduate students and professionals in polymerchemistry, chemical engineering, and materials science who are involved in researchon coatings, adhesives, rubber, latex, paints, finishes, and other materials that can becreated using various methods of emulsion polymerization.
Download or read book Polymer Particles written by Masayoshi Okubo and published by Springer Science & Business Media. This book was released on 2005-02-10 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this special volume on polymer particles, recent trends and developments in the synthesis of nano- to micron-sized polymer particles by radical polymerization (Emulsion, Miniemulsion, Microemulsion, and Dispersion Polymerizations) of vinyl monomers in environmentally friendly heterogeneous aqueous and supercritical carbon dioxide fluid media are reviewed by prominent worldwide researchers. In addition to the important challenges and possibilities with regards to design and preparation of functionalized polymer particles of controlled size, the topics described are of great current interest due to the increased awareness of environmental issues.
Download or read book Polymeric Dispersions Principles and Applications written by J.M. Asua and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and up to date survey of the science and technology of polymeric dispersions. The book discusses the kinetics and mechanisms of polymerization in dispersed media, examines the processes controlling particle morphology, presents both off-line and on-line methods for the characterization of polymer colloids, considers reactor engineering and control, and covers a wide variety of applications, such as latex paint formulations, encapsulation of inorganic particles, reactive latexes, adhesives, paper coating, and biomedical and pharmaceutical applications. Audience: A valuable resource for scientists and engineers, academic and industrial, who are involved in the manufacture or application of polymeric dispersions.
Download or read book Vinyl Acetate Emulsion Polymerization and Copolymerization with Acrylic Monomers written by Yildirim H. Erbil and published by CRC Press. This book was released on 2000-03-22 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: The versatility of the emulsion copolymerization reaction and the ability to control the properties of the final latices have led to rapid expansion both in the quantity of polyvinylacetate and vinyl acetate-acrylic copolymer latices and in their applications. Vinyl Acetate Emulsion Polymerization and Copolymerization with Acrylic Monomers provides
Download or read book Emulsion Polymerization of Vinyl Acetate written by Mohamed S. El-Aasser and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is particularly appropriate that this symposium on the emulsion polymeriza tion of vinyl acetate was held in recognition of the industrial importance of poly(vinyl acetate) and vinyl acetate copolymers, and their rather unique properties among emulsion polymers in general. Poly( vinyl acetate) latexes were the first synthetic polymer latexes to be made on a commercial scale: their production using polyvinyl alcohol as emulsifier began in Germany during the mid-1930s and has continued to the present day, growing steadily with the years. Indeed, poly(vinyl acetate) latexes prepared with polyvinyl alcohol are still one of the mainstays of the adhesives industry. With the passing of time, however, vinyl acetate copolymers have been developed: copolymers with maleate esters such as dibutyl maleate, acrylate esters such as ethyl acrylate and butyl acrylate, versatic acid esters, and, more recently, ethylene. These versatile copolymers have found increasing use in more sophisticated adhesives with specialized properties, adhesives for clay coatings on paper, carpet backing, and interior and exterior paints. Thus more than 45 years after the first commercial production of vinyl acetate latexes, their use is still growing, both in actual quantities and different applications. The industrial importance of vinyl acetate latexes makes the mechanism and kinetics of their emulsion polymerization of practical as well as scientific interest.
Download or read book Emulsion Polymerization and Its Applications in Industry written by V. I. Eliseeva and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a large body of Soviet work on emulsion polymerization, spanning a period of over three decades, that has been published primarily in the Russian language. Most of this has remained untranslated into English and hence un available to most other scientists. The value of this book lies primarily in the fact that it brings together the most important of these Soviet contributions, along with comment and analysis by the authors, who may be considered among the foremost authorities in this field in the Soviet Union. But the hundreds of literature citations go far beyond the borders of the Soviet Union and serve as an excellent bibliography of the world literature on emulsion polymerization up to the time this book was written. The book covers both fundamental and applied aspects. In the former are included discussions of particle formation mechanisms, a comprehensive theory of emulsion polymerization, copolymerization of polar monomers, and particle morphology and its implications with regard to derived film properties. Among the applied aspects are discussions of continuous emulsion polymerization, both tubular reactors and continuous stirred tank cascades, and various aspects con cerning the manufacture of some of the most important monomers, such as styrene, butadiene, vinyl acetate, methyl methacrylate, acrylonitrile, and chloroprene. This book will be an indispensable reference source for scientists who are entering the field as well as those who are experienced and who have wanted a ready access to this large body of literature.
Download or read book Polymer Colloids written by Robert M. Fitch and published by Academic Press. This book was released on 1997-05-02 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text introduces the beginner to the field with a solid development of the fundamentals, without getting bogged down in details. It provides an insight that can only be found from the author's 40+ years of experience
Download or read book Concentrated Emulsion Polymerization written by Eli Ruckenstein and published by CRC Press. This book was released on 2019-03-29 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprising one volume of Functional and Modified Polymeric Materials, Two-Volume Set, this curated collection of papers by Professor Eli Ruckenstein and co-workers discusses the merits of concentrated emulsion polymerization systems, as well as their ability to yield a broad variety of products with high synthetic efficiency. Comprised of carefully curated chapters previously published by these pioneering scientists in the field, this volume offers a comprehensive view of the subject and presents functional and modified polymeric materials prepared by concentrated emulsion polymerization approaches. It covers conductive polymer composites, core-shell latex particles, enzyme/catalyst carriers, and plastics toughening and compatibilization polymerization. The authors have performed seminal studies on the preparation of functional and modified polymeric materials via concentrated emulsion polymerization. The corresponding research papers, after further selection and classification, are collected in the four chapters of this book.
Download or read book Advances in Polymer Latex Technology written by Vikas Mittal and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The polymer latex technology by emulsion polymerisation offers significant advantages as compared to bulk and solution polymerisation technologies owing to the better control of heat and viscosity of the medium along with the possibility of increasing the molecular weight of the polymer chains without affecting the rate of polymerisation. These emulsion polymerisation methods have undergone significant advances in the recent years and now a days, synthesis of structured latexes with well defined morphologies and properties has been possible. The development of miniemulsion polymerisation has helped to polymerise very hydrophobic and very hydrophilic monomers, which otherwise are difficult to be polymerised with the conventional emulsion polymerisation. The combination of controlled living polymerisation methods like nitroxide mediated polymerisation, atom transfer radical polymerisation as well as reversible addition fragmentation chain transfer with the emulsion and miniemulsion polymerisation methods has resulted into the synthesis of functional block copolymer chains, graft copolymer chains and star or multi arm copolymer chains in the polymer particles. Apart from that, specific surface modifications on the surface of the emulsion particles have been achieved which have expended the area of application of such polymer particles. The kinetics and mechanism of particle generation with the living polymerisation in emulsion and miniemulsion are very complex, however, the recent advances have helped to understand these systems more clearly, thus, allowing to steer them to the advantage. Therefore, these recent advances in the latex technology need to be brought into a cumulative text in order to provide insight into the various possibilities of achieving the optimum latexes.
Download or read book Fundamentals of Latex Film Formation written by Joseph Keddie and published by Springer Science & Business Media. This book was released on 2010-02-18 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has emerged out of our long-time research interests on the topic of latex film formation. Over the years we have built up a repertoire of slides used in conference presentations, short courses and tutorials on the topic. The story presented in this book has thereby taken shape as it has been told and re-told to a mix of academic and industrial audiences. The book presents a wide body of work accumulated by the polymer colloids community over the past five decades, but the selection of examples has been flavoured by our particular experimental interests and development of mathematical models. We intend the book to be a starting point for academic and industrial scientists beginning research on latex film formation. The emphasis is on fundam- tal mechanisms, however, and not on applications nor on specific effects of formu- tions. We hope that the book consolidates the understanding that has been achieved to-date in the literature in a more comprehensive way than is possible in a review article. We trust that the reader will appreciate the fascination of the topic.
Download or read book Emulsion Polymerization and Emulsion Polymers written by Peter A. Lovell and published by John Wiley & Sons. This book was released on 1997-04-03 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emulsion Polymerization and Emulsion Polymers Edited by Peter A. Lovell Manchester Materials Science Centre, UMIST, Manchester, UK and Mohamed S. El-Aasser Emulsion Polymers Institute and Department of Chemical Engineering, Lehigh University, Bethlehem, PA, USA Emulsion polymerization is a technologically and commercially important reaction used to produce synthetic polymers and latexes for a wide range of applications. It is the basis of a massive global industry that is expanding due to the versatility of the reaction and the greater realization of the ability to control properties of the polymer latexes produced. Emulsion Polymerization and Emulsion Polymers provides an up-to-date treatment of both academic and industrial aspects of the subject in a single self-contained volume. Established knowledge is integrated with latest developments and introductory chapters to give a state-of-the-art summary which is also suitable as a broad based introduction to the field. The individual chapters have been written by specialists from academia and industry and are presented in a way which ensures that the book will be of equal value to experienced researchers and students.
Download or read book Particle Stabilized Emulsions and Colloids written by To Ngai and published by Royal Society of Chemistry. This book was released on 2014-11-13 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been much scientific interest in the behaviour of colloidal particles at liquid interfaces. From a research aspect they provide model systems for fundamental studies of condensed matter physics. From a commercial aspect they provide applications for making new materials in the cosmetics, food and paint industries. In many cases of colloidal particles at interfaces, the mechanism of particle interactions is still unknown. Particle-Stabilized Emulsions and Colloids looks at recent studies on the behaviour of particles at liquid interfaces. The book first introduces the basic concepts and principles of colloidal particles at liquid-liquid interfaces including the interactions and conformations. The book then discusses the latest advances in emulsions and bicontinuous emulsions stabilized by both solid and soft particles and finally the book covers applications in food science and oil extraction. With contributions from leading experts in these fields, this book will provide a background to academic researchers, engineers, and graduate students in chemistry, physics and materials science. The commercial aspects will also be of interest to those working in the cosmetics, food and oil industry.
Download or read book Emulsion Polymerization written by Robert G. Gilbert and published by . This book was released on 1995 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a modern overview of the principles governing emulsion polymerization, a topic of both academic and industrial importance. The reader is provided with the mathematical, physical and technical tools to understand the mechanisms and physical chemistry of these systems, particularly the major advances of the last 15 years. The book describes the mechanisms that govern the various aspects of an emulsion polymerization, and how from appropriate experimental studies, the dominant mechanisms in a particular system may be deduced. From such deductions, the means are developed whereby the properties of the result of the emulsion polymerization can be quantitatively modelled and trends can be qualitatively understood and predicted. This book opens the way to the intelligent, knowledge-based design that is the future for improvements and innovations in products and processes from this important technology. Provides a thoroughly up-to-date overview of the principles and practices of emulsion polymerization Contains mathematical, physical, and technical tools which enable the reader to understand the mechanisms and physical chemistry used in the field Includes extensive exercises with model answers
Download or read book The Complete Book on Emulsifiers with Uses Formulae and Processes 2nd Revised Edition written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2014-01-01 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emulsifier is an organic compound that encompasses in the same molecule two dissimilar structural groups e.g. water soluble and a water insoluble moiety. It is the ingredient which binds the water and oil in a cream or lotion together permanently. The composition, solubility properties, location and relative sizes of these dissimilar groups in relation to the overall molecular configuration determine the surface activity of a compound. Emulsifiers are classified on the basis of their hydrophilic or solubilizing groups in to four categories anionic, non ionic, cationics and amphoterics. Emulsifier is utilized in various industries; agriculture, building and construction, elastomers & plastics, food & beverages, industrial cleaning, leather, metals, paper, textiles paints & protective coatings etc. An emulsion is an ideal formulation for the administration. The emulsion form allows uniform application of a small amount of active ingredient on the surface of the skin. Some of the important emulsions in different field are pharmaceutical emulsions, rosin & rubber emulsion, textile emulsions, pesticide emulsions, food emulsions, emulsion in paint industry, emulsion in polish industry, leather & paper treatment emulsions etc. Various cosmetics creams, such as moisturizers, contain emulsifiers. Lighter, less greasy feeling creams are oil in water emulsions; heavier creams used to treat rough skin are water in oil emulsions, with oil as the main ingredient. Liquid soaps, toothpastes and other body care products also contain emulsifiers. Emulsifiers have the ability to optimize the concentration of certain nutrients in an emulsion. For example, in hair conditioners, some conditioning agents can damage hair if not properly diluted in the solution. Emulsifiers are among the most frequently used types of food additives. Emulsifiers can help to make a food appealing. Emulsifiers have a big effect on the structure and texture of many foods. Increasing demand for low fat food among health conscious consumers is gradually driving the market for emulsifiers. Besides stabilizing emulsions, emulsifiers derived from non hydrogenated fats help in maintaining sensory characteristics of food such as texture, flavor, and taste that are often lost due to fat reduction. This characteristic of making healthier products similar in taste to fat containing versions has enabled emulsifiers in gaining widespread acceptance in the market. The global food industry is also witnessing increase in demand for multipurpose emulsifiers that perform functions of both stabilization and emulsification. Some of the fundamentals of the book are characteristics and application of emulsifiers, wetting and detergent structures in emulsifier, effect of surfactant on the properties of solutions, wetting characteristics of emulsifiers, formulated emulsifiers, non surfactant functional additives, inert fillers, functional surfactant additives, uses of emulsifiers, household and personal products, industrial uses of emulsifier, anionic surfactants, non ionic surfactants, cationic, amphoteric and enzyme, alkylolamides, vinylarene polymers, alkyl sulfates, ethoxylation processes, application of emulsifiers, etc. The present book contains manufacturing processes of various types of emulsifiers which have applications in different industries. This is a resourceful book for scientists, technologists, entrepreneurs and ingredients suppliers. TAGS applications of emulsifier, Book on emulsifier, emulsifier Based Small Scale Industries, emulsifier examples, emulsifier in food, Emulsifier Processing Industry in India, emulsifiers list, Emulsifiers with Uses, Formulae and Processes, Emulsion - Uses of Emulsions, Emulsion Surface Area, Emulsions in Polish Industry, Food Emulsifier Applications, Food Emulsifiers and Their Applications, formulation and stability of emulsions with polymeric emulsifiers, Formulation of emulsifiers, Formulation of Emulsion Paints manufacturing process, Formulation of Textile emulsions manufacturing process, function of emulsifier in cosmetics, function of emulsifier in food, how to manufacture emulsifiers, How to start an emulsifier Production Business, How to Start Emulsifier Processing Industry in India, Industrial Applications of Emulsion Technology, Industrial Uses of Emulsifier, Leather and Paper Treatment Emulsions manufacturing process, Manufacturing process of emulsifier, Most Profitable emulsifier Processing Business Ideas, Nature and use of emulsifiers in foods, new small scale ideas in emulsifier processing industry, pharmaceutical application of emulsion, Procedure for Emulsification of Oil in Water Using Surfactants, Process of Polish Emulsions, Process technology book on emulsifier, role of emulsifier in emulsion, role of surfactant in emulsion, Starting an emulsifier Processing Business, types of food emulsifiers, Uses of emulsifiers, What is an Emulsifier?
Download or read book Polymer Colloids written by R. Buscall and published by Springer. This book was released on 1985-01-31 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
