Download or read book Empirical Study of the Stability of Biodiesel and Biodiesel Blends written by R. L. McCormick and published by DIANE Publishing. This book was released on 2009-05 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: In support of the U.S. Dept. of Energy (DOE) Fuels Technologies Program Multiyear Program Plan Goal of identifying fuels that can displace 5% of petroleum diesel by 2010, the Nat. Renewable Energy Lab. (NREL), in collaboration with the Nat. Biodiesel Board (NBB) and with subcontractor Southwest Research Institute, performed a study of biodiesel oxidation stability. The objective of this work was to develop a database to support specific proposals for a stability test and specification for biodiesel and biodiesel blends. B100 samples from 19 biodiesel producers were obtained during Dec. 2005 and Jan. 2006 and tested for stability. Eight of these samples were then selected for additional study, including long-term storage tests and blending at 5% and 20% with a number of ultra-low sulfur diesel (ULSD) fuels. These blends were also tested for stability. The study employed accelerated tests as well as tests intended to simulate three real-world aging scenarios: (1) storage and handling, (2) vehicle fuel tank, and (3) high-temperature engine fuel system. Results were analyzed to determine whether ensuring B100 stability was adequate to ensure the stability of B5 and B20 blends. Several tests were also performed with two commercial antioxidant additives to determine whether these additives might improve stability. This report documents completion of the NREL Fiscal Year 2007 Annual Operating Plan Milestone 10.1. Illus.
Download or read book Automotive Fuels Reference Book Fourth Edition written by Paul Richards and published by SAE International. This book was released on 2023-11-15 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: The earlier editions of this title have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited latest edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful, This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources, including e-fuels. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. As CO2 is now an important emission there is also discussion regarding low and non-carbon fuels and how they might be used. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures. (ISBN 9781468605785, ISBN 9781468605792, ISBN 9781468605808, DOI 10.4271/9781468605792)
Download or read book Automotive Fuels Reference Book written by Paul Richards and published by SAE International. This book was released on 2014-03-05 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first two editions of this title, published by SAE International in 1990 and 1995, have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited new edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful. This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures.
Download or read book Empirical Study of the Stability of Biodiesel and Biodiesel Blends written by Robert L. McCormick and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Direct Thermochemical Liquefaction for Energy Applications written by Lasse Rosendahl and published by Woodhead Publishing. This book was released on 2017-11-14 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Thermochemical Liquefaction for Energy Applications presents the state-of-the-art of the value chains associated with these biomass conversion technologies. It covers multiple feedstock availability and feedstock composition impact on process chemistry and product quality and composition. Expert authors from around the world explore co-processing benefits, process parameters, implementation and scaling, upgrading to drop-in liquid biofuels or integration into existing petrochemical refinery infrastructure. Finally, these topics are put into a sustainability perspective by establishing an LCA framework for this type of process. Its focus on implementation based on the most comprehensive knowledge makes this book particularly useful for researchers and graduate students from all sorts of background working in the field of biomass and biofuels. It is also a valuable reference for engineers working to commercialize DTL technologies, engineering specialists designing process equipment, refinery professionals and developers. - Focuses on implementation and scaling of direct thermochemical liquefaction technologies for biomass conversion into biofuels - Covers the state-of-the-art of the technologies, as well as technical and sustainability implementation aspects - Includes new approaches and concepts developed around the world within the different DTL technologies
Download or read book Manufacturing Technologies and Production Systems written by Abhineet Saini and published by CRC Press. This book was released on 2023-11-15 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book, which is part of a two-volume handbook set, presents a collection of recent advances in the field of industrial engineering, design, and related technologies. It includes state-of-the-art research conducted in the fields of Industry 4.0/5.0, smart systems/industries, robotics and automation, automobile engineering, thermal and fluid engineering, and its implementation. Manufacturing Technologies and Production Systems: Principles and Practices offers a comprehensive description of the developments in industrial engineering primarily focusing on industrial design, automotive engineering, construction and structural engineering, thermo-fluid mechanics, and interdisciplinary domains. The book captures emerging areas of materials science and advanced manufacturing engineering and presents the most recent trends in research for emerging researchers, field engineers, and academic professionals.
Download or read book Production of Biodiesels from Multiple Feedstocks and Properties of Biodiesels and Biodiesel diesel Blends written by John A. Kinast and published by . This book was released on 2003 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of 9th Edition of International Conference on BIOFUELS AND BIOENERGY 2018 written by EuroScicon and published by EuroScicon. This book was released on 2018-03-23 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: March 29-30, 2018 | Edinburgh, Scotland Key Topics : Biomass, Biogas, Bioenergy, Renewable Energy, Biorefineries, Bioethanol, Biodiesel, Aviation Biofuels, Advanced Biofuels, Algal Biofuels, Nanotechnology In Biofuels, Food V/S Fuel Debate, Bioeconomy, Energy And Environment, Green Energy And Economy, Advances In Renewable Chemicals, Entrepreneurs Investment Meet,
Download or read book Advanced Nanocatalysts for Biodiesel Production written by Bhaskar Singh and published by CRC Press. This book was released on 2022-09-22 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Nanocatalysts for Biodiesel Production is a comprehensive and advanced book on practical and theoretical concepts of nanocatalysts dealing with future processing techniques towards environmental sustainability. The book critically discusses on latest emerging advanced nanocatalysts for biodiesel production aimed at reducing complexities and cost in the quest to meet future energy demands. Efforts have been made at clarifying the scope and limitations of biodiesel production in large-scale commercialization. The book discusses the size-dependent catalytic properties of nanomaterials and their working mechanisms in biodiesel production. Life cycle assessment of optimized viable feedstock from domestic as well as industrial waste is also addressed to improve the efficiency of biodiesel production. The book will be a valuable reference source for researchers and industrial professionals focusing on elementary depth analysis of nanocatalyst multifunctional technological applications in seeking key ideas for mimicking biodiesel production towards ecology and the economy. Key Features Provides a comprehensive environmental assessment of advanced nanocatalysts for biodiesel production to meet tha world’s energy demands Discusses the green platform-based nanocatalysts like metal oxides/sulphides, 2D layered material synthesis and their relevance for biodiesel production. Presents a pathway for cheaper, cleaner and more environmentally friendly processing techniques for biodiesel production
Download or read book Nano and Biocatalysts for Biodiesel Production written by Avinash P. Ingle and published by John Wiley & Sons. This book was released on 2021-06-25 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews recent advances in catalytic biodiesel synthesis, highlighting various nanocatalysts and nano(bio)catalysts developed for effective biodiesel production Nano- and Biocatalysts for Biodiesel Production delivers an essential reference for academic and industrial researchers in biomass valorization and biofuel industries. The book covers both nanocatalysts and biocatalysts, bridging the gap between homogenous and heterogenous catalysis. Readers will learn about the techno-economical and environmental aspects of biodiesel production using different feedstocks and catalysts. They will also discover how nano(bio)catalysts can be used as effective alternatives to conventional catalysts in biodiesel production due to their unique properties, including reusability, high activation energy and rate of reaction, easy recovery, and recyclability. Readers will benefit from the inclusion of: Introductions to CaO nanocatalysts, zeolite nanocatalysts, titanium dioxide-based nanocatalysts and zinc-based in biodiesel production An exploration of carbon-based heterogeneous nanocatalysts for the production of biodiesel Practical discussions of bio-based nano catalysts for biodiesel production and the application of nanoporous materials as heterogeneous catalysts for biodiesel production An analysis of the techno-economical considerations of biodiesel production using different feedstocks Nano- and Biocatalysts for Biodiesel Production focuses on recent advances in the field and offers a complete and informative guide for academic researchers and industrial scientists working in the fields of biofuels and bioenergy, catalysis, biotechnology, bioengineering, nanotechnology, and materials science.
Download or read book Green Chemistry for Sustainable Biofuel Production written by Veera Gnaneswar Gude and published by CRC Press. This book was released on 2018-05-24 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable fuel research and process development requires interdisciplinary approaches involving chemists and physicists from both scientific and engineering backgrounds. Here is an important volume that emphasizes green chemistry and green engineering principles for sustainable process development from an interdisciplinary point of view. It creates an enriching knowledge base on green chemistry of biofuel production, sustainable process development, and green engineering principles for renewable fuel production. This book includes chapters contributed by both research scientists and research engineers with significant experience in biofuel chemistry and processes. The book offers an abundance of scientific experimental methods and analytical procedures and interpretation of the results that capture the state-of-the-art knowledge in this field. The wide range of topics make this book a valuable resource for academicians, researchers, industrial practitioners and scientists, and engineers in various renewable energy fields. Key features: • Emphasizes green chemistry and green engineering principles for sustainable process development for biofuel production • Discusses a wide array of biofuels from algal biomass to waste-to-energy technologies and wastewater treatment and activated sludge processes • Presents advances and developments in biofuel green chemistry and green engineering, including process intensification (microwaves/ultrasound), ionic liquids, and green catalysis • Looks at environmental assessment and economic impact of biofuel production
Download or read book Lipid Biochemistry written by Michael I. Gurr and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition of this successful and popular book in 1970, the subject of lipid biochemistry has evolved greatly and this fifth up-to-date and comprehensive edition includes much new and exciting information. Lipid Biochemistry, fifth edition has been largely re-written in a user-friendly way, with chapters containing special interest topic boxes, summary points and lists of suggested reading, further enhancing the accessibility and readability of this excellent text. Contents include abbreviations and definitions used in the study of lipids, routine analytical methods, fatty acid structure and metabolism, dietary lipids and lipids as energy stores, lipid transport, lipids in cellular structures and the metabolism of structural lipids. The book provides a most comprehensive treatment of the subject, making it essential reading for all those working with or studying lipids. Upper level students of biochemistry, biology, clinical subjects, nutrition and food science will find the contents of this book invaluable as a study aid, as will postgraduates specializing in the topics covered in the book. Professionals working in research in academia and industry, including personnel involved in food and nutrition research, new product formulation, special diet formulation (including nutraceuticals and functional foods) and other clinical aspects will find a vast wealth of information within the book's pages. Michael Gurr was a Visiting Professor in Human Nutrition at the University of Reading, UK and at Oxford Brookes University, UK. John Harwood is a Professor of Biochemistry at the School of Biosciences, Cardiff University, UK. Keith Frayn is a Professor of Human Metabolism at the Oxford Centre for Diabetes, Endocrinology and Metabolism, University of Oxford, UK.
Download or read book Proceedings of the First International Conference on Recent Advances in Bioenergy Research written by Sachin Kumar and published by Springer. This book was released on 2016-04-25 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume aims to provide latest updates in the area of bioenergy including biodiesel, bioethanol, biomethanation, biomass gasification, and biomass cook-stove. The proceedings of ICRABR 2015 include cutting edge research vital to R&D organizations, academics, and the industry to promote and document the recent developments in the area of bioenergy for all types of stakeholders. The volume highlights the needs of biofuels and their market, the barriers and challenges faced by biofuels and bioenergy and future strategies required to foster new ideas for research, collaboration and commercialization of bioenergy. The major themes of this contributed volume are: Biomass and Energy Management ;Thermochemical Conversion Processes; Biochemical Conversion Processes; Catalytic Conversion Processes; Electrochemical Processes; Waste Treatment to Harvest Energy; and Integrated Processes. The contents of the volume will appeal to students, researchers, professionals, and policymakers in the field of bifuels and bioenergy.
Download or read book Application of Machine Learning in Slope Stability Assessment written by Zhang Wengang and published by Springer Nature. This book was released on 2023-07-08 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the application of machine learning in slope stability assessment. The contents include: overview of machine learning approaches, the mainstream smart in-situ monitoring techniques, the applications of the main machine learning algorithms, including the supervised learning, unsupervised learning, semi- supervised learning, reinforcement learning, deep learning, ensemble learning, etc., in slope engineering and landslide prevention, introduction of the smart in-situ monitoring and slope stability assessment based on two well-documented case histories, the prediction of slope stability using ensemble learning techniques, the application of Long Short-Term Memory Neural Network and Prophet Algorithm in Slope Displacement Prediction, displacement prediction of Jiuxianping landslide using gated recurrent unit (GRU) networks, seismic stability analysis of slopes subjected to water level changes using gradient boosting algorithms, efficient reliability analysis of slopes in spatially variable soils using XGBoost, efficient time-variant reliability analysis of Bazimen landslide in the Three Gorges Reservoir Area using XGBoost and LightGBM algorithms, as well as the future work recommendation.The authors also provided their own thoughts learnt from these applications as well as work ongoing and future recommendations.
Download or read book Food Emulsifiers and Their Applications written by Richard W Hartel and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food emulsions have existed since long before people began to process foods for distribution and consumption. Milk, for example, is a natural emulsion/colloid in which a nutritional fat is stabilized by a milk-fat-globule membrane. Early processed foods were developed when people began to explore the art of cuisine. Butter and gravies were early foods used to enhance flavors and aid in cooking. By contrast, food emulsifiers have only recently been recognized for their abil ity to stabilize foods during processing and distribution. As economies of scale emerged, pressures for higher quality and extension of shelf life prodded the de velopment of food emulsifiers and their adjunct technologies. Natural emulsifiers, such as egg and milk proteins and phospholipids, were the first to be generally utilized. Development of technologies for processing oils, such as refining, bleaching, and hydrogenation, led to the design of synthetic food emulsifiers. Formulation of food emulsions has, until recently, been practiced more as an art than a science. The complexity offood systems has been the barrier to funda mental understanding. Scientists have long studied emulsions using pure water, hydrocarbon, and surfactant, but food systems, by contrast, are typically a com plex mixture of carbohydrate, lipid, protein, salts, and acid. Other surface-active ingredients, such as proteins and phospholipids, can demonstrate either syner- XV xvi Preface gistic or deleterious functionality during processing or in the finished food.
Download or read book Nano and Biocatalysts for Biodiesel Production written by Avinash P. Ingle and published by John Wiley & Sons. This book was released on 2021-06-21 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews recent advances in catalytic biodiesel synthesis, highlighting various nanocatalysts and nano(bio)catalysts developed for effective biodiesel production Nano- and Biocatalysts for Biodiesel Production delivers an essential reference for academic and industrial researchers in biomass valorization and biofuel industries. The book covers both nanocatalysts and biocatalysts, bridging the gap between homogenous and heterogenous catalysis. Readers will learn about the techno-economical and environmental aspects of biodiesel production using different feedstocks and catalysts. They will also discover how nano(bio)catalysts can be used as effective alternatives to conventional catalysts in biodiesel production due to their unique properties, including reusability, high activation energy and rate of reaction, easy recovery, and recyclability. Readers will benefit from the inclusion of: Introductions to CaO nanocatalysts, zeolite nanocatalysts, titanium dioxide-based nanocatalysts and zinc-based in biodiesel production An exploration of carbon-based heterogeneous nanocatalysts for the production of biodiesel Practical discussions of bio-based nano catalysts for biodiesel production and the application of nanoporous materials as heterogeneous catalysts for biodiesel production An analysis of the techno-economical considerations of biodiesel production using different feedstocks Nano- and Biocatalysts for Biodiesel Production focuses on recent advances in the field and offers a complete and informative guide for academic researchers and industrial scientists working in the fields of biofuels and bioenergy, catalysis, biotechnology, bioengineering, nanotechnology, and materials science.
Download or read book Gasoline Additives written by Vahid Pirouzfar and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-10-24 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gasoline – the most common petroleum product comes in several types or grades. Straight-run gasoline is generated solely by crude oil distillation. Crack gasoline, derived by thermal or catalytic breaking of heavier oil fractions, accounts for the majority of gasoline used in automobile and aviation. Straight-run gasoline, fractured gasoline, reformed and synthetic gasoline, and additives are used to create a wide range of gasoline kinds.
