Download or read book Emerging Separation and Separative Reaction Technologies for Process Waste Reduction written by Peter P. Radecki and published by . This book was released on 1999 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Findings from a workshop on process waste reduction via separation technologies and separative reactors. The book focuses primarily on adsorption and membrane separation technologies, outlines the fundamental concepts important to each of the technologies, describes state of the art processes using technologies, and highlights broad areas of need for each technology.
Download or read book Introduction to Green Chemistry written by John Andraos and published by CRC Press. This book was released on 2022-03-10 with total page 1406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in green chemistry and clean processes has grown so much in recent years that topics such as fluorous biphasic catalysis, metal organic frameworks, and process intensification, which were barely mentioned in the First Edition, have become major areas of research. In addition, government funding has ramped up the development of fuel cells and biofuels. This reflects the evolving focus from pollution remediation to pollution prevention. Copiously illustrated with more than 800 figures, the Third Edition provides an update from the frontiers of the field. It features supplementary exercises at the end of each chapter relevant to the chemical examples introduced in each chapter. Particular attention is paid to a new concluding chapter on the use of green metrics as an objective tool to demonstrate proof of synthesis plan efficiency and to identify where further improvements can be made through fully worked examples relevant to the chemical industry. NEW AND EXPANDED RESEARCH TOPICS Metal-organic frameworks Metrics Solid acids for alkylation of isobutene by butanes Carbon molecular sieves Mixed micro- and mesoporous solids Organocatalysis Process intensification and gas phase enzymatic reactions Hydrogen storage for fuel cells Reactive distillation Catalysts in action on an atomic scale UPDATED AND EXPANDED CURRENT EVENTS TOPICS Industry resistance to inherently safer chemistry Nuclear power Removal of mercury from vaccines Removal of mercury and lead from primary explosives Biofuels Uses for surplus glycerol New hard materials to reduce wear Electronic waste Smart growth The book covers traditional green chemistry topics, including catalysis, benign solvents, and alternative feedstocks. It also discusses relevant but less frequently covered topics with chapters such as "Chemistry of Long Wear" and "Population and the Environment." This coverage highlights the importance of chemistry to everyday life and demonstrates the benefits the expanded exploitation of green chemistry can have for society.
Download or read book Introduction to Green Chemistry written by Albert Matlack and published by CRC Press. This book was released on 2010-04-05 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers traditional green chemistry topics, including catalysis, benign solvents, and alternative feedstocks. It also discusses relevant but less frequently covered topics with chapters such as Chemistry of Longer Wear and Population and the Environment. This coverage highlights the importance of chemistry to everyday life and demonstrates the benefits the expanded exploitation of green chemistry can have for society. Copiously illustrated with over 800 figures, this second edition provides an update from the frontiers of the field.
Download or read book Albright s Chemical Engineering Handbook written by Lyle Albright and published by CRC Press. This book was released on 2008-11-20 with total page 1930 pages. Available in PDF, EPUB and Kindle. Book excerpt: From fundamentals to plant operations, Albright's Chemical Engineering Handbook offers a thorough, yet succinct guide to day-to-day methods and calculations used in chemical engineering applications. Leaders from an exceptional diversity of specialties provide a clear review of basic information, case examples, and references to additional information. They discuss essential principles, calculations, and key issues such as reaction engineering, process control and design, waste disposal, and electrochemical and biochemical engineering. The final chapters cover aspects of patents, intellectual property, communications, and ethics that are most relevant to engineers.
Download or read book Toward Zero Discharge written by Tapas K. Das and published by John Wiley & Sons. This book was released on 2005-04-08 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses pathways to achieve pollution prevention and waste minimization at the sources leading toward zero discharge. Coverage includes life cycle assessment, industrial ecology, eco-industrial parks, green engineering, and sustainable chemical and allied processes and products development. The pulp and paper industry is introduced as a case study in demonstrating how this industry is achieving pollution prevention goals by various techniques, and how this industry has become a minimum impact industry, moving towards achieving zero discharge status in most process areas. Featuring a collection of expert authors, this book is essential reading for industrial ecologists and engineers, material scientists, and state and federal officials.
Download or read book Separation Technologies for the Industries of the Future written by National Research Council and published by National Academies Press. This book was released on 1999-02-08 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation processesâ€"or processes that use physical, chemical, or electrical forces to isolate or concentrate selected constituents of a mixtureâ€"are essential to the chemical, petroleum refining, and materials processing industries. In this volume, an expert panel reviews the separation process needs of seven industries and identifies technologies that hold promise for meeting these needs, as well as key technologies that could enable separations. In addition, the book recommends criteria for the selection of separations research projects for the Department of Energy's Office of Industrial Technology.
Download or read book Micro Process Engineering 3 Volume Set written by Volker Hessel and published by John Wiley & Sons. This book was released on 2009-03-23 with total page 1413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume handbook provides an overview of the key aspects of micro process engineering. Volume 1 covers the fundamentals, operations and catalysts, volume 2 examines devices, reactions and applications, with volume 3 rounding off the trilogy with system, process and plant engineering. Fluid dynamics, mixing, heat/mass transfer, purification and separation microstructured devices and microstructured reactors are explained in the first volume. Volume 2 segments microreactor design, fabrication and assembly, bulk and fine chemistry, polymerisation, fuel processing and functional materials into understandable parts. The final volume of the handbook addresses microreactor systems design and scale-up, sensing, analysis and control, chemical process engineering, economic and eco-efficiency analyses as well as microreactor plant case studies in one book. Together, this 3-volume handbook explains the science behind micro process engineering to the scale-up and their real life industrial applications.
Download or read book Separation Processes in Waste Minimization written by Robert B. Long and published by CRC Press. This book was released on 2020-09-10 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work offers an accessible discussion of current and emerging separation processes used for waste minimization, showing how the processes work on a day-to-day basis and providing troubleshooting tips for equipment that doesn't function according to design specifications. It describes the fundamentals of over 30 processes, types of equipment available, vendors, and common problems encountered in operations with hazardous waste.
Download or read book Membrane Engineering for the Treatment of Gases written by Enrico Drioli and published by Royal Society of Chemistry. This book was released on 2011-07-06 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membranes already have important applications in artificial organs, the processing of biotechnological products, food manufacture, waste water treatment, and seawater desalination. Their uses in gaseous mixture separations are, however, far from achieving their full potential. Separation of air components, natural gas dehumidification and sweeting, separation and recovery of CO2 from biogas, and H2 from refinery gases are all examples of current industrial applications. The use of membranes for reducing the greenhouse effect and improving energy efficiency has also been suggested. New process intensification strategies in the petrochemical industry have opened up another growth area for gas separation membrane systems and membrane reactors. This two volume set presents the state-of-the-art in membrane engineering for the separation of gases. It addresses future developments in carbon capture and utilization, H2 production and purification, and O2/N2 separation. Topics covered include the: applications of membrane gas separation in the petrochemical industry; implementation of membrane processes for post-combustion capture; commercial applications of membranes in gas separations; simulation of membrane systems for CO2 capture; design and development of membrane reactors for industrial applications; Pd-based membranes in hydrogen production; modelling and simulation of membrane reactors for hydrogen production and purification; novel hybrid membrane/pressure swing adsorption process for gas separation; molecular dynamics as a new tool for membrane design, and physical aging of membranes for gas separations. Volume 1 focuses predominantly on problems relating to membranes.
Download or read book European Symposium on Computer Aided Process Engineering 11 written by R. Gani and published by Elsevier. This book was released on 2001-04-30 with total page 1208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers presented at the 11th Symposium of Computer Aided Process Engineering (ESCAPE-11), held in Kolding, Denmark, from May 27-30, 2001. The objective of ESCAPE-11 is to highlight the use of computers and information technology tools, that is, the traditional CAPE topics as well as the new CAPE topics of current and future interests. The main theme for ESCAPE-11 is process and tools integration with emphasis on hybrid processing, cleaner and efficient technologies (process integration), computer aided systems for modelling, design, synthesis, control (tools integration) and industrial case studies (application of integrated strategies). The papers are arranged in terms of the following themes: computer aided control/operations, computer aided manufacturing, process and tools integration, and new frontiers in CAPE. A total of 188 papers, consisting of 5 keynote and 183 contributed papers are included in this book.
Download or read book Membranes for Industrial Wastewater Recovery and Re use written by S. Judd and published by Elsevier. This book was released on 2003-04-25 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is increasing political and environmental pressure on industry to clean up the water which it uses in many processes, and to re-use this water where possible. This cleaning is done using specially-developed industrial membranes and this book covers the types and design of membranes, how they work and in which industries they are used. Special attention is paid to the textile, food/ beverage, pharmaceutical, oil and pulp and paper industries where such membranes are in regular use.
Download or read book A Research Agenda for Transforming Separation Science written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-10-30 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation science plays a critical role in maintaining our standard of living and quality of life. Many industrial processes and general necessities such as chemicals, medicines, clean water, safe food, and energy sources rely on chemical separations. However, the process of chemical separations is often overlooked during product development and this has led to inefficiency, unnecessary waste, and lack of consensus among chemists and engineers. A reevaluation of system design, establishment of standards, and an increased focus on the advancement of separation science are imperative in supporting increased efficiency, continued U.S. manufacturing competitiveness, and public welfare. A Research Agenda for Transforming Separation Science explores developments in the industry since the 1987 National Academies report, Separation and Purification: Critical Needs and Opportunities. Many needs stated in the original report remain today, in addition to a variety of new challenges due to improved detection limits, advances in medicine, and a recent emphasis on sustainability and environmental stewardship. This report examines emerging chemical separation technologies, relevant developments in intersecting disciplines, and gaps in existing research, and provides recommendations for the application of improved separation science technologies and processes. This research serves as a foundation for transforming separation science, which could reduce global energy use, improve human and environmental health, and advance more efficient practices in various industries.
Download or read book Index of Conference Proceedings written by British Library. Document Supply Centre and published by . This book was released on 1999 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Separation Techniques in Nuclear Waste Management 1995 written by Thomas E Carleson and published by CRC Press. This book was released on 2017-11-22 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation Techniques in Nuclear Waste Management is an up-to-date, comprehensive survey of processes for separation of nuclear wastes. Comprised of articles by scientists and engineers at universities and national laboratories in the U.S. and overseas, the book provides excellent reference information for individuals working in nuclear waste management. Specifically, the book covers current separation technologies and techniques for waste liquid, solid, and gas streams that contain radionuclides. Such wastes are typical of those produced as a result of nuclear materials processing and spent fuel reprocessing. Chapters on promising new technologies and state-of-the-art processes currently in use provide valuable information for design engineers, as well as for research scientists. The articles in Separation Techniques in Nuclear Waste Management are brief and concise - designed for quick access to pertinent information. Many of the contributors are leaders in their fields. It is the most current survey available of the latest nuclear waste management techniques.
Download or read book Sci tech News written by and published by . This book was released on 1999 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Roadmapping Emergent Technologies written by David Tolfree and published by Troubador Publishing Ltd. This book was released on 2009 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows how roadmapping can prepare the policy-maker and planner for the challenges and changes which lie ahead. It provides the reader with a comprehensive introduction on roadmapping methodology, extracts from existing roadmaps covering the key sectors of industry.
Download or read book Chemical Separation Technologies and Related Methods of Nuclear Waste Management written by Gregory R. Choppin and published by Springer Science & Business Media. This book was released on 1999-02-28 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation technologies are of crucial importance to the goal of significantly reducing the volume of high-level nuclear waste, thereby reducing the long-term health risks to mankind. International co-operation, including the sharing of concepts and methods, as well as technology transfer, is essential in accelerating research and development in the field. The writers of this book are all internationally recognised experts in the field of separation technology, well qualified to assess and criticize the current state of separation research as well as to identify future opportunities for the application of separation technologies to the solution of nuclear waste management problems. The major emphases in the book are research opportunities in the utilization of innovative and potentially more efficient and cost effective processes for waste processing/treatment, actinide speciation/separation methods, technological processing, and environmental restoration.
