Download or read book Emerging Engineering Materials written by Mel Schwartz and published by CRC Press. This book was released on 1996-03-21 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Author's Preface The rapid advances in Materials Science and Engineering . . . have convinced many that the design, production and use of advanced materials will shape future manufacturing industries. Competitive advantage within entire industries is shaped by the quality of the materials available to the manufacturers; the early availability of a new material can be leveraged manyfold. In addition, advanced materials or advanced materials processing can signal the birth or death of entire industries, and access to higher quality and lower cost material has permitted some countries to obtain market dominance in several key industries. Much of the new strategy entails harnessing the potential of innovative technology, that is, going back to the nano and molecular states of materials and new, effective ways to create, process, and eventually use them. Rather than being concerned with a relatively small number of generic materials, each possessing a broad range of uses, the materials sector is increasingly concerned with tailoring a growing list of ever more specialized materials for narrow niche applications. New products with better growth prospects such as high-performance alloys, composites, laminates, and a variety of coatings have been emphasized. Materials firms also have sought ways to overcome the weaknesses of ceramics and fully exploit their formidable strengths. "Functional materials" that do more than support structures have been developed for use in sophisticated electronic, optical, magnetic, and biotech applications. This book will . . . show what materials will be available in the next decade or two, in addition to those currently available and their effect on material design, start-up, and production processes.
Download or read book New Materials in Civil Engineering written by Pijush Samui and published by Butterworth-Heinemann. This book was released on 2020-07-07 with total page 1105 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Materials in Civil Engineering provides engineers and scientists with the tools and methods needed to meet the challenge of designing and constructing more resilient and sustainable infrastructures. This book is a valuable guide to the properties, selection criteria, products, applications, lifecycle and recyclability of advanced materials. It presents an A-to-Z approach to all types of materials, highlighting their key performance properties, principal characteristics and applications. Traditional materials covered include concrete, soil, steel, timber, fly ash, geosynthetic, fiber-reinforced concrete, smart materials, carbon fiber and reinforced polymers. In addition, the book covers nanotechnology and biotechnology in the development of new materials. Covers a variety of materials, including fly ash, geosynthetic, fiber-reinforced concrete, smart materials, carbon fiber reinforced polymer and waste materials Provides a “one-stop resource of information for the latest materials and practical applications Includes a variety of different use case studies
Download or read book Materials Science and Engineering for the 1990s written by National Research Council and published by National Academies Press. This book was released on 1989-02-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials science and engineering (MSE) contributes to our everyday lives by making possible technologies ranging from the automobiles we drive to the lasers our physicians use. Materials Science and Engineering for the 1990s charts the impact of MSE on the private and public sectors and identifies the research that must be conducted to help America remain competitive in the world arena. The authors discuss what current and future resources would be needed to conduct this research, as well as the role that industry, the federal government, and universities should play in this endeavor.
Download or read book Emerging Materials for Civil Infrastructure written by Roberto A. Lopez-Anido and published by ASCE Publications. This book was released on 2000-01-01 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Emerging Materials Committee of the Materials Division of ASCE. This report presents a review of the state of the art on emerging materials for use in civil engineering infrastructure. Emerging materials include novel and new materials, as well as traditional materials with profound potential in new applications. A material or class of materials is considered "emerging" if its use has not yet progressed to a stage wherein well-established guidelines, codes, and specifications exist for its use. This report is conveniently divided into chapters that address specific classes of materials andØhighlight the most recent developments in materials technologies relevant to civil infrastructure.Ø Topics include: smart materials for civil engineering applications; fiber reinforced composites in civil infrastructure; emerging geomaterials for ground improvement; aluminum materials and the infrastructure; polymer concrete made with recycled plastics; state of the practice in asphalt technology; emerging uses for masonry materials; and emerging uses for window glass. The practicing engineer, student, or general reader will find this to be an easy-to-use reference for construction material systems that are being developed for use in civil engineering.
Download or read book Innovations in Everyday Engineering Materials written by T. DebRoy and published by Springer Nature. This book was released on 2021-01-04 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an invaluable reference of materials engineering written for a broad audience in an engaging, effective way. Several stories explain how perseverance and organized research helps to discover new processes for making important materials and how new materials with unmatched properties are theoretically conceived, tested in the laboratory, mass produced and deployed for the benefit of all. This book provides a welcome introduction to how advances are made in the world of materials that sustain and define our contemporary standard of living. Suitable for trained materials scientists and the educated layman with an appreciation of engineering, the book will be especially appealing to the young materials engineer, for whom it will serve as a long-term reference due to its clear and rigorous illustration of the field's essential features.
Download or read book Emerging Materials for Energy Conversion and Storage written by Kuan Yew Cheong and published by Elsevier. This book was released on 2018-08-09 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging Materials for Energy Conversion and Storage presents the state-of-art of emerging materials for energy conversion technologies (solar cells and fuel cells) and energy storage technologies (batteries, supercapacitors and hydrogen storage). The book is organized into five primary sections, each with three chapters authored by worldwide experts in the fields of materials science, physics, chemistry and engineering. It covers the fundamentals, functionalities, challenges and prospects of different classes of emerging materials, such as wide bandgap semiconductors, oxides, carbon-based nanostructures, advanced ceramics, chalcogenide nanostructures, and flexible organic electronics nanomaterials. The book is an important reference for students and researchers (from academics, but also industry) interested in understanding the properties of emerging materials. Explores the fundamentals, challenges and prospects for the application of emerging materials in the development of energy conversion and storage devices Presents a discussion of solar cell and photovoltaic, fuel cell, battery electrode, supercapacitor and hydrogen storage applications Includes notable examples of energy devices based on emerging materials to illustrate recent advances in this field
Download or read book Engineering Materials Technology written by James A. Jacobs and published by Prentice Hall. This book was released on 1985 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emerging Materials written by Laxman Raju Thoutam and published by Springer. This book was released on 2023-05-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a quick guide on the latest material systems including their synthesis, fabrication and characterization techniques. It discusses recent developments in different material systems and discusses their novel applications in various branches of science and engineering. The book briefs latest computational tools and techniques that are used to discover new material systems. The book also briefs applications of new emerging materials in various fields including, healthcare, sensors, opto-electronics, high power devices and nano-electronics. This book helps to create a synergy between computational and experimental research methods to better understand a particular material system.
Download or read book Emerging Trends in Medical Plastic Engineering and Manufacturing written by Markus Schönberger and published by William Andrew. This book was released on 2016-01-06 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging Trends in Medical Plastic Engineering and Manufacturing gives engineers and materials scientists working in the field detailed insights into upcoming technologies in medical polymers. While plastic manufacturing combines the possibility of mass production and wide design variability, there are still opportunities within the plastic engineering field which have not been fully adopted in the medical industry. In addition, there are numerous additional challenges related to the development of products for this industry, such as ensuring tolerance to disinfection, biocompatibility, selecting compliant additives for processing, and more. This book enables product designers, polymer processing engineers, and manufacturing engineers to take advantage of the numerous upcoming developments in medical plastics, such as autoregulated volume-correction to achieve zero defect production or the development of ‘intelligent’ single use plastic products, and methods for sterile manufacturing which reduce the need for subsequent sterilization processes. Finally, as medical devices get smaller, the book discusses the challenges posed by miniaturization for injection molders, how to respond to these challenges, and the rapidly advancing prototyping technologies. Provides a roadmap to the emerging technologies for polymers in the medical device industry, including coverage of ‘intelligent’ single use products, personalized medical devices, and the integration of manufacturing steps to improve workflows Helps engineers in the biomedical and medical devices industries to navigate and anticipate the special requirements of this field with relation to biocompatibility, sterilization methods, and government regulations Presents tactics readers can use to take advantage of rapid prototyping technologies, such as 3D printing, to reduce defects in production and develop products that enable entirely new treatment possibilities
Download or read book Materials for Engineering written by J Martin and published by Woodhead Publishing. This book was released on 2006-04-28 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of what has become a modern classic presents a lively overview of Materials Science which is ideal for students of Structural Engineering. It contains chapters on the structure of engineering materials, the determination of mechanical properties, metals and alloys, glasses and ceramics, organic polymeric materials and composite materials. It contains a section with thought-provoking questions as well as a series of useful appendices. Tabulated data in the body of the text, and the appendices, have been selected to increase the value of Materials for engineering as a permanent source of reference to readers throughout their professional lives. The second edition was awarded Choice’s Outstanding Academic Title award in 2003. This third edition includes new information on emerging topics and updated reading lists.
Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 1171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.
Download or read book Materials Science and Engineering Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2017-01-11 with total page 1837 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and study of materials is a pivotal component to new discoveries in the various fields of science and technology. By better understanding the components and structures of materials, researchers can increase its applications across different industries. Materials Science and Engineering: Concepts, Methodologies, Tools, and Applications is a compendium of the latest academic material on investigations, technologies, and techniques pertaining to analyzing the synthesis and design of new materials. Through its broad and extensive coverage on a variety of crucial topics, such as nanomaterials, biomaterials, and relevant computational methods, this multi-volume work is an essential reference source for engineers, academics, researchers, students, professionals, and practitioners seeking innovative perspectives in the field of materials science and engineering.
Download or read book Engineering Materials for Biomedical Applications written by Swee Hin Teoh and published by World Scientific. This book was released on 2004 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: The success of any implant or medical device depends very much on the biomaterial used. Synthetic materials (such as metals, polymers and composites) have made significant contributions to many established medical devices. The aim of this book is to provide a basic understanding on the engineering and processing aspects of biomaterials used in medical applications. Of paramount importance is the tripartite relationship between material properties, processing methods and design. As the target audiences cover a wide interdisciplinary field, each chapter is written with a detailed background so that audience of another discipline will be able to understand. For the more knowledgeable reader, a detailed list of references is included.
Download or read book Engineering Materials Technology written by James A. Jacobs and published by . This book was released on 1997 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing basic concepts supported by industrial practices and applications, this text/reference on engineering materials is designed to help students develop problem-solving abilities in such areas as materials evaluation and selection, materials processes selection, failure analysis, and materials testing. It focuses on materials in the systems context and prepares students to work with current engineering materials as well as with new and/or improved technologies that influence many aspects of engineering materials technology. Over 200 experiments and demonstrations from the National Educators' Workshops are listed throughout. This edition provides revised case studies with illustrations of materials applications which highlight new developments. It also contains new/revised solved problems and self-assessment questions, including a database of objective questions (with solutions).
Download or read book Engineering Materials 1 written by M. F. Ashby and published by . This book was released on 1996 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a broad introduction to the properties of materials used in engineering applications, and is intended to provide a course in engineering materials for students with no previous background in the subject.
Download or read book Materials Research to Meet 21st Century Defense Needs written by National Research Council and published by National Academies Press. This book was released on 2003-03-25 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to achieve the revolutionary new defense capabilities offered by materials science and engineering, innovative management to reduce the risks associated with translating research results will be needed along with the R&D. While payoff is expected to be high from the promising areas of materials research, many of the benefits are likely to be evolutionary. Nevertheless, failure to invest in more speculative areas of research could lead to undesired technological surprises. Basic research in physics, chemistry, biology, and materials science will provide the seeds for potentially revolutionary technologies later in the 21st century.
Download or read book Science of Engineering Materials written by Dr. C. M. Srivastava and published by . This book was released on 1987-09-10 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory book covers both conventional and newly emerging materials for engineering applications. It describes the properties of materials desirable for specific applications and outlines some of the useful methods of synthesis. Throughout, the correlation between the structures and properties of materials are highlighted. Areas of applications covered include semiconductors, magnetic materials, superconductors, opto-electronic materials, dielectric materials, amorphous materials, nuclear engineering, and space engineering. Includes discussion of modern techniques for materials studies.
