Download or read book EMC Design Techniques for Electronic Engineers written by Keith Armstrong and published by . This book was released on 2010-01-01 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Printed Circuit Board Design Techniques for EMC Compliance written by Mark I. Montrose and published by Wiley-IEEE Press. This book was released on 2000-07-04 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Electromagnetic compatibility (EMC) is an engineering discipline often identified as "black magic." This belief exists because the fundamental mechanisms on how radio frequency (RF) energy is developed within a printed circuit board (PCB) is not well understood by practicing engineers. Rigorous mathematical analysis is not required to design a PCB. Using basic EMC theory and converting complex concepts into simple analogies helps engineers understand the mitigation process that deters EMC events from occurring. This user-friendly reference covers a broad spectrum of information never before published, and is as fluid and comprehensive as the first edition. The simplified approach to PCB design and layout is based on real-life experience, training, and knowledge. Printed Circuit Board Techniques for EMC Compliance, Second Edition will help prevent the emission or reception of unwanted RF energy generated by components and interconnects, thus achieving acceptable levels of EMC for electrical equipment. It prepares one for complying with stringent domestic and international regulatory requirements. Also, it teaches how to solve complex problems with a minimal amount of theory and math. Essential topics discussed include: * Introduction to EMC * Interconnects and I/O * PCB basics * Electrostatic discharge protection * Bypassing and decoupling * Backplanes-Ribbon Cables-Daughter Cards * Clock Circuits-Trace Routing-Terminations * Miscellaneous design techniques This rules-driven book-formatted for quick access and cross-reference-is ideal for electrical and EMC engineers, consultants, technicians, and PCB designers regardless of experience or educational background." Sponsored by: IEEE Electromagnetic Compatibility Society

Download or read book Electromagnetic Compatibility Engineering written by Henry W. Ott and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for Noise Reduction Techniques IN electronic systems "Henry Ott has literally 'written the book' on the subject of EMC. . . . He not only knows the subject, but has the rare ability to communicate that knowledge to others." —EE Times Electromagnetic Compatibility Engineering is a completely revised, expanded, and updated version of Henry Ott's popular book Noise Reduction Techniques in Electronic Systems. It reflects the most recent developments in the field of electromagnetic compatibility (EMC) and noise reduction¿and their practical applications to the design of analog and digital circuits in computer, home entertainment, medical, telecom, industrial process control, and automotive equipment, as well as military and aerospace systems. While maintaining and updating the core information—such as cabling, grounding, filtering, shielding, digital circuit grounding and layout, and ESD—that made the previous book such a wide success, this new book includes additional coverage of: Equipment/systems grounding Switching power supplies and variable-speed motor drives Digital circuit power distribution and decoupling PCB layout and stack-up Mixed-signal PCB layout RF and transient immunity Power line disturbances Precompliance EMC measurements New appendices on dipole antennae, the theory of partial inductance, and the ten most common EMC problems The concepts presented are applicable to analog and digital circuits operating from below audio frequencies to those in the GHz range. Throughout the book, an emphasis is placed on cost-effective EMC designs, with the amount and complexity of mathematics kept to the strictest minimum. Complemented with over 250 problems with answers, Electromagnetic Compatibility Engineering equips readers with the knowledge needed to design electronic equipment that is compatible with the electromagnetic environment and compliant with national and international EMC regulations. It is an essential resource for practicing engineers who face EMC and regulatory compliance issues and an ideal textbook for EE courses at the advanced undergraduate and graduate levels.

Download or read book EMC and the Printed Circuit Board written by Mark I. Montrose and published by John Wiley & Sons. This book was released on 2004-04-05 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible, new reference work shows how and why RF energy iscreated within a printed circuit board and the manner in whichpropagation occurs. With lucid explanations, this book enablesengineers to grasp both the fundamentals of EMC theory and signalintegrity and the mitigation process needed to prevent an EMCevent. Author Montrose also shows the relationship between time andfrequency domains to help you meet mandatory compliancerequirements placed on printed circuit boards. Using real-world examples the book features: Clear discussions, without complex mathematical analysis, offlux minimization concepts Extensive analysis of capacitor usage for variousapplications Detailed examination of components characteristics with variousgrounding methodologies, including implementation techniques An in-depth study of transmission line theory A careful look at signal integrity, crosstalk, andtermination

Download or read book Electromagnetic Compatibility EMC Design and Test Case Analysis written by Junqi Zheng and published by John Wiley & Sons. This book was released on 2019-06-18 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical introduction to techniques for the design of electronic products from the Electromagnetic compatibility (EMC) perspective Introduces techniques for the design of electronic products from the EMC aspects Covers normalized EMC requirements and design principles to assure product compatibility Describes the main topics for the control of electromagnetic interferences and recommends design improvements to meet international standards requirements (FCC, EU EMC directive, Radio acts, etc.) Well organized in a logical sequence which starts from basic knowledge and continues through the various aspects required for compliance with EMC requirements Includes practical examples and case studies to illustrate design features and troubleshooting Author is the founder of the EMC design risk evaluation approach and this book presents many years’ experience in teaching and researching the topic

Download or read book EMC for Product Designers written by Tim Williams and published by Elsevier. This book was released on 2001-05-17 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tim Williams has worked for a variety of companies as an electronic design engineer over the last 20 years. He has monitored the progress of the EMC Directive and its associated standards since it was first made public. He is a member of the Institution of Electrical Engineers and now runs his own consultancy, specialising in EMC design and training. *Save money on consultancy bills with this book *Practical guide to implementing EMC within the product design process *The leading professional guide to the EMC Directive -100% up-to-date and reliable

Download or read book Printed Circuit Board Design Techniques for EMC Compliance written by Mark I. Montrose and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1996 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents simple techniques for designing and laying out circuits that meet the most stringent domestic and international regulations on electromagnetic compatibility for high technology products. Includes sample designs in every stage of the product development cycle, information on the latest suppression techniques, and a checklist of layout techniques. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book Electromagnetic Compatibility in Power Electronics written by László Tihanyi and published by Newnes. This book was released on 1995 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronics professionals will find this book invaluable when designing power equipment, because it describes in detail how to cope with the problem of electromagnetic interference. The author shows how to meet the exacting US and European EMC standards for conducted emissions. The book includes a wide range of EMI analysis techniques. An important focus is on the energy content of interference transient signals (traditional analysis concentrates on amplitude and frequency). This provides a more accurate picture of the EMI situation. For those who do not want or need detailed analysis techniques, many approximation methods are also provided. These simplified techniques give accurate results for all but the most stringent applications. The book contains several worked examples and an extensive bibliography, and is sure to be useful to electronic design engineers and others who need to meet international EMC regulations and standards. Laszlo Tihanyi has worked on EMC for over 20 years. Formerly Head of the Department of Power Electronics at the Hungarian Research Institute for the Electrical Industry, he focused primarily on solving EMI problems in electronic systems and developing a dimensioning method for power line filters.

Download or read book The Physical Basis of EMC written by Keith Armstrong and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Noise Reduction Techniques in Electronic Systems written by Henry W. Ott and published by Wiley-Interscience. This book was released on 1988-03-23 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated and expanded version of the very successful first edition offers new chapters on controlling the emission from electronic systems, especially digital systems, and on low-cost techniques for providing electromagnetic compatibility (EMC) for consumer products sold in a competitive market. There is also a new chapter on the susceptibility of electronic systems to electrostatic discharge. There is more material on FCC regulations, digital circuit noise and layout, and digital circuit radiation. Virtually all the material in the first edition has been retained. Contains a new appendix on FCC EMC test procedures.

Download or read book Design Technology of System Level EMC Engineering written by Xiaobin Tang and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-08-24 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the state-of-the-art research progress of system-level EMC, including theories, design technologies, principles and applications in practice. The engineering design, simulation, prediction, analysis, test, stage control as well as effectiveness evaluation are discussed in detail with extensive project experiences, making the book an essential reference for researchers and industrial engineers.

Download or read book EMI EMC Computational Modeling Handbook written by Bruce R. Archambeault and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of computational electromagnetics to practical EMI/EMC engineering is an emerging technology. Because of the increased complexity in EMI/EMC issues resulting from advancements in electronics and telecommunications, it is no longer possible to rely exclusively on traditional techniques and tools to solve the growing list of electronic engineering design problems. EMI/EMC Computational Modeling Handbook introduces modeling and simulation of electromagnetics to real-world EMI/EMC engineering. It combines the essentials of electromagnetics, computational techniques, and actual EMI/EMC applications. Included are such popular full-wave computational modeling techniques as the Method of Moments, Finite-Difference Time Domain Technique, Finite Element Method, and several others. The authors have included a myriad of applications for computers, telecommunications, consumer electronics, medical electronics, and military uses. EMI/EMC Computational Modeling Handbook is an invaluable reference work for practicing EMI/EMC engineers, electronic design engineers, and any engineer involved in computational electromagnetics.

Download or read book EMC at Component and PCB Level written by Martin O 'Hara and published by Elsevier. This book was released on 1998-04-08 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the knowledge and good design practice for the design or test engineer to take the necessary measures to improve EMC performance and therefore the chance of achieving compliance, early on in the design process. There are many advantages for both the component supplier and consumer, of looking at EMC at component and PCB level. For the suppliers, not only will their products have the competitive edge because they have known EMC performance, but they will be prepared should EMC compliance become mandatory in the future. For consumers it is a distinct advantage to know how a component will behave within a system with regard to EMC. Shows how to achieve EMC compliance early on in the design process Provides the knowledge to trace system EMC performance problems Follows best design practices

Download or read book Electrical Modeling and Design for 3D System Integration written by Er-Ping Li and published by John Wiley & Sons. This book was released on 2012-04-10 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: New advanced modeling methods for simulating the electromagnetic properties of complex three-dimensional electronic systems Based on the author's extensive research, this book sets forth tested and proven electromagnetic modeling and simulation methods for analyzing signal and power integrity as well as electromagnetic interference in large complex electronic interconnects, multilayered package structures, integrated circuits, and printed circuit boards. Readers will discover the state of the technology in electronic package integration and printed circuit board simulation and modeling. In addition to popular full-wave electromagnetic computational methods, the book presents new, more sophisticated modeling methods, offering readers the most advanced tools for analyzing and designing large complex electronic structures. Electrical Modeling and Design for 3D System Integration begins with a comprehensive review of current modeling and simulation methods for signal integrity, power integrity, and electromagnetic compatibility. Next, the book guides readers through: The macromodeling technique used in the electrical and electromagnetic modeling and simulation of complex interconnects in three-dimensional integrated systems The semi-analytical scattering matrix method based on the N-body scattering theory for modeling of three-dimensional electronic package and multilayered printed circuit boards with multiple vias Two- and three-dimensional integral equation methods for the analysis of power distribution networks in three-dimensional package integrations The physics-based algorithm for extracting the equivalent circuit of a complex power distribution network in three-dimensional integrated systems and printed circuit boards An equivalent circuit model of through-silicon vias Metal-oxide-semiconductor capacitance effects of through-silicon vias Engineers, researchers, and students can turn to this book for the latest techniques and methods for the electrical modeling and design of electronic packaging, three-dimensional electronic integration, integrated circuits, and printed circuit boards.

Download or read book EMC for Systems and Installations written by Tim Williams and published by Newnes. This book was released on 1999-12-06 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a guide for the system designers and installers faced with the day-to-day issues of achieving EMC, and will be found valuable across a wide range of roles and sectors, including process control, manufacturing, medical, IT and building management. The EMC issues covered will also make this book essential reading for product manufacturers and suppliers - and highly relevant for managers as well as technical staff. The authors' approach is thoroughly practical - all areas of installation EMC are covered, with particular emphasis on cabling and earthing. Students on MSc and CPD programmes will also find in this book some valuable real-world antidotes to the academic treatises. The book is presented in two parts: the first is non-technical, and looks at the need for EMC in the context of systems and installations, with a chapter on the management aspects of EMC. The second part covers the technical aspects of EMC, looking at the various established methods which can be applied to ensure compatibility, and setting these in the context of the new responsibilities facing system builders. EMC for Systems and Installations is designed to complement Tim Williams' highly successful EMC for Product Designers. Practical guide to EMC design issues for those involved in systems design and installation Complementary title to Williams' bestselling EMC for Product Designers Unique guidance for installers on EMC topics

Download or read book Electromagnetic Compatibility for Space Systems Design written by Nikolopoulos, Christos D. and published by IGI Global. This book was released on 2018-03-02 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the aerospace industry, avoiding operating issues, especially in regard to space missions and satellite structures, is crucial. The vast majority of these issues can be traced to disturbances in the electromagnetic fields used. Electromagnetic Compatibility for Space Systems Design is a critical scholarly resource that examines the applications of electromagnetic compatibility and electromagnetic interference in the space industry. Featuring coverage on a wide range of topics, such as magnetometers, electromagnetic environmental effects, and electromagnetic shielding, this book is geared toward managers, engineers, and researchers seeking current research on the applications of electromagnetic technologies in the aerospace field.

Download or read book EMC for Product Designers written by Tim Williams and published by Elsevier. This book was released on 2011-04-01 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Widely regarded as the standard text on EMC, Tim Williams’ book provides all the key information needed to meet the requirements of the latest EMC Directive. Most importantly, it shows how to incorporate EMC principles into the product design process, avoiding cost and performance penalties, meeting the needs of specific standards and resulting in a better overall product. As well as covering the very latest legal requirements, the fourth edition has been thoroughly updated in line with the latest best practice in EMC compliance and product design. Coverage has been considerably expanded to include the R&TTE and Automotive EMC Directives, as well the military aerospace standards of DEF STAN 59-41 and DO160E. A new chapter on systems EMC is included, while short case studies demonstrate how EMC product design is put into practice. Tim Williams has worked for a variety of companies as an electronic design engineer over the last 25 years. He has monitored the progress of the EMC Directive and its associated standards since it was first made public. He now runs his own consultancy specialising in EMC design and test advice and training. Includes the compliance procedures of the latest EMC Directive: 2004/108/EC Short case studies demonstrating how EMC product design is put into practice Packed full with many new chapters including: The R&TTE Directive and the Automotive EMC Directive looking at compliance aspects of radio and telecom terminal equipment and automotive electronic products; New chapter on military aerospace standards of DEP STAN 59-41 and DO1 60E; New chapter on systems EMC