Download or read book Data Centric Business and Applications written by Dmytro Ageyev and published by Springer Nature. This book was released on 2021-06-04 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, building on the authors’ previous work, presents new communication and networking technologies, challenges and opportunities of information/data processing and transmission. It also discusses the development of more intelligent and efficient communication technologies, which are an essential part of current day-to-day life. Information and Communication Technologies (ICTs) have an enormous impact on businesses and our day-to-day lives over the past three decades and continue to do so. Modern methods of business information processing are opening exciting new opportunities for doing business on the basis of information technologies. The book contains research that spans a wide range of communication and networking technologies, including wireless sensor networks, optical and telecommunication networks, storage area networks, error-free transmission and signal processing.

Download or read book Power System Harmonics written by Ahmed F. Zobaa and published by BoD – Books on Demand. This book was released on 2018-05-30 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excessive utilization of power electronic devices and the increasing integration of renewable energy resources with their inverter-based interfaces into distribution systems have brought different power quality problems in these systems. There is no doubt that the transition from traditional centralized power systems to future decentralized smart grid necessities is paying much attention to power quality knowledge to realize better system reliability and performance to be ready for the big change in the coming years of accommodating thousands of decentralized generation units. This book aims to present harmonic modeling, analysis, and mitigation techniques for modern power systems. It is a tool for the practicing engineers of electrical power systems that are concerned with the power system harmonics. Likewise, it is a key resource for academics and researchers who have some background in electrical power systems.

Download or read book Mathematical Modeling and Simulation of Systems written by Alexander Palagin and published by Springer. This book was released on 2019-07-17 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents current investigations in the field of mathematical modeling and simulation to support the development of intelligent information systems in domains such as ecology and geology, manufacturing, project management, and safety of distributed information systems. The book will be of interest to developers of modern high-tech software complexes for situational control centers, based on mathematical modeling and simulation methods. In addition, it will appeal to software engineers and programmers, offering them new implementation and application methods. Gathering the latest research, prepared by leading scholars, and identifying promising new directions for solving complex scientific and practical problems, the book presents selected outcomes of the 14th International Scientific-Practical Conference, MODS2019, held in Chernihiv, Ukraine, on June 24 to 26, 2019.

Download or read book Machine Learning based Design and Optimization of High Speed Circuits written by Vazgen Melikyan and published by Springer Nature. This book was released on 2024-01-31 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes machine learning-based new principles, methods of design and optimization of high-speed integrated circuits, included in one electronic system, which can exchange information between each other up to 128/256/512 Gbps speed. The efficiency of methods has been proven and is described on the examples of practical designs. This will enable readers to use them in similar electronic system designs. The author demonstrates newly developed principles and methods to accelerate communication between ICs, working in non-standard operating conditions, considering signal deviation compensation with linearity self-calibration. The observed circuit types also include but are not limited to mixed-signal, high performance heterogeneous integrated circuits as well as digital cores.

Download or read book Digital Ecosystems Interconnecting Advanced Networks with AI Applications written by Andriy Luntovskyy and published by Springer Nature. This book was released on with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Intelligent Systems and Computing IV written by Natalya Shakhovska and published by Springer Nature. This book was released on 2019-11-01 with total page 971 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on new theories and applications in the field of intelligent systems and computing. It covers computational and artificial intelligence methods, as well as advances in computer vision, current issues in big data and cloud computing, computation linguistics, and cyber-physical systems. It also reports on important topics in intelligent information management. Written by active researchers, the respective chapters are based on selected papers presented at the XIV International Scientific and Technical Conference on Computer Science and Information Technologies (CSIT 2019), held on September 17–20, 2019, in Lviv, Ukraine. The conference was jointly organized by the Lviv Polytechnic National University, Ukraine, the Kharkiv National University of Radio Electronics, Ukraine, and the Technical University of Lodz, Poland, under patronage of Ministry of Education and Science of Ukraine. Given its breadth of coverage, the book provides academics and professionals with extensive information and a timely snapshot of the field of intelligent systems, and is sure to foster new discussions and collaborations among different groups.

Download or read book Nanocomposites Nanostructures and Their Applications written by Olena Fesenko and published by Springer. This book was released on 2019-08-02 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights some of the latest advances in nanotechnology and nanomaterials from leading researchers in Ukraine, Europe, and beyond. It features contributions from participants in the 6th International Science and Practice Conference Nanotechnology and Nanomaterials (NANO2018) in Kiev, Ukraine on August 27-30, 2018 organized by the Institute of Physics of the National Academy of Sciences of Ukraine, University of Tartu (Estonia), University of Turin (Italy), and Pierre and Marie Curie University (France). Internationally recognized experts from a wide range of universities and research institutions share their knowledge and key results on material properties, behavior, and synthesis. This book's companion volume also addresses topics such as nanooptics, energy storage, and biomedical applications.

Download or read book Cases on Modern Computer Systems in Aviation written by Shmelova, Tetiana and published by IGI Global. This book was released on 2019-02-19 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because trainees need to learn about the underlying technologies to use automation safely and efficiently, the development of automated aviation systems training is a growing challenge. Task analysis has been singled out as the basis of the training, but it can be more time-consuming than traditional development techniques. Cases on Modern Computer Systems in Aviation is an essential reference source that covers new information technology use in aviation systems to streamline the cybersecurity, decision-making, planning, and design processes within the aviation industry. Featuring coverage on a broad range of topics such as computer systems in aviation, artificial intelligence, software-defined networking (SDN), air navigation systems, decision support systems (DSS), and more, this publication is ideally designed for aviation specialists and industry professionals, technicians, practitioners, researchers, and academicians seeking current research on modern modeling approaches to streamline management in aviation.

Download or read book Advances in Artificial Intelligence written by Kunal Pal and published by Elsevier. This book was released on 2024-05-21 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Intelligence in health care has become one of the best assisting techniques for clinicians in proper diagnosis and surgery. In biomedical applications, artificial intelligence algorithms are explored for bio-signals such as electrocardiogram (ECG/ EKG), electrooculogram (EOG), electromyogram (EMG), electroencephalogram (EEG), blood pressure, heart rate, nerve conduction, etc., and for bio-imaging modalities, such as Computed Tomography (CT), Cone-Beam Computed Tomography (CBCT), MRI (Magnetic Resonance Imaging), etc. Advancements in Artificial intelligence and big data has increased the development of innovative medical devices in health care applications. Recent Advances in Artificial Intelligence: Medical Applications provides an overview of artificial intelligence in biomedical applications including both bio-signals and bio-imaging modalities. The chapters contain a mathematical formulation of algorithms and their applications in biomedical field including case studies. Biomedical engineers, advanced students, and researchers can use this book to apply their knowledge in artificial intelligence-based processes to biological signals, implement mathematical models and advanced algorithms, as well as develop AI-based medical devices. - Covers the recent advancements of artificial intelligence in healthcare, including case studies on how this technology can be used - Provides an understanding of the design of experiments to validate the developed algorithms - Presents an understanding of the versatile application of artificial intelligence in bio-signal and bio-image processing techniques

Download or read book 6th International Conference on Nanotechnologies and Biomedical Engineering written by Victor Sontea and published by Springer Nature. This book was released on 2023-10-15 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on advances in fundamental and applied research at the interface between nanotechnology and biomedical engineering. Gathering peer-reviewed contributions to the 6th International Conference on Nanotechnologies and Biomedical Engineering, ICNBME held on September 20-23, 2023, in Chisinau, Republic of Moldova, this second volume of the proceedings focuses on clinical engineering and instrumentation, bioinformatics, image and signal processing techniques, and new technologies for medical diagnosis, treatment and personalised medicine. With a good balance of theory and practice, the book offers a timely snapshot of multidisciplinary research at the interface between physics, chemistry, biomedicine, materials science, and engineering.

Download or read book Data Centric Business and Applications written by Tamara Radivilova and published by Springer Nature. This book was released on 2020-06-20 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the challenges and opportunities of information/data processing and management. It also covers a range of methods, techniques and strategies for making it more efficient, approaches to increasing its usage, and ways to minimize information/data loss while improving customer satisfaction. Information and Communication Technologies (ICTs) and the Service Systems associated with them have had an enormous impact on businesses and our day-to-day lives over the past three decades, and continue to do so. This development has led to the emergence of new application areas and relevant disciplines, which in turn present new challenges and opportunities for service system usage. The book provides practical insights into various aspects of ICT technologies for service systems: Techniques for information/data processing and modeling in service systems Strategies for the provision of information/data processing and management Methods for collecting and analyzing information/data Applications, benefits, and challenges of service system implementation Solutions to increase the performance of various service systems using the latest ICT technologies

Download or read book Systems Decision and Control in Energy I written by Vitaliy Babak and published by Springer Nature. This book was released on 2020-07-01 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the problems in the field of energy and related areas (including chemistry, transport, aerospace, construction, metallurgy and engineering) that Ukrainian scientists are currently investigating. The research presented focuses on ensuring the operational reliability, durability and safety of energy equipment, as well as the development of control, diagnostics and monitoring systems in the energy sector. Further, the book explores the ecological consequences of energy facilities , particularly environmental pollution in large cities and industrial areas. Written mainly by representatives of the Council of Young Scientists of the Department of Physical and Technical Problems of Energy at the NAS of Ukraine, it is intended for researchers and engineers, as well as lecturers and postgraduates at higher education institutions interested in the control, diagnosis and monitoring of energy facilities.

Download or read book Lecture Notes in Computational Intelligence and Decision Making written by Sergii Babichev and published by Springer Nature. This book was released on 2021-07-22 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to current problems of artificial and computational intelligence including decision-making systems. Collecting, analysis, and processing information are the current directions of modern computer science. Development of new modern information and computer technologies for data analysis and processing in various fields of data mining and machine learning creates the conditions for increasing effectiveness of the information processing by both the decrease of time and the increase of accuracy of the data processing. The book contains of 54 science papers which include the results of research concerning the current directions in the fields of data mining, machine learning, and decision making. The papers are divided in terms of their topic into three sections. The first section "Analysis and Modeling of Complex Systems and Processes" contains of 26 papers, and the second section "Theoretical and Applied Aspects of Decision-Making Systems" contains of 13 papers. There are 15 papers in the third section "Computational Intelligence and Inductive Modeling". The book is focused to scientists and developers in the fields of data mining, machine learning and decision-making systems.

Download or read book Smart Technologies in Urban Engineering written by Olga Arsenyeva and published by Springer Nature. This book was released on 2022-11-29 with total page 878 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive review of smart technologies and perspectives on their application in urban engineering. It covers a wide range of applications, from transport and energy management to digital manufacturing, smart city, environment, and sustainable development, providing readers with new ideas for future research and collaborations. This book presents select papers from the International Conference on Smart Technologies in Urban Engineering (STUE-2022), held to commemorate the 100th anniversary of the O.M. Beketov National University of Urban Economy in Kharkiv, Ukraine, on June 9–11, 2022. All the contributions offer plenty of valuable information and would be of great benefit to the experience exchange among scientists in urban engineering.

Download or read book Advances in Computer Science for Engineering and Manufacturing written by Zhengbing Hu and published by Springer Nature. This book was released on 2022-04-14 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book’s general scope covers the latest advances in the development of artificial intelligence systems and their applications in engineering and manufacturing. The book comprises refereed papers presented at the International Symposium on Engineering and Manufacturing (ISEM2021), held in Kyiv, Ukraine, on December 24–26, 2021. Given the rapid development of artificial intelligence systems, the book emphasizes the need for the intensification of training of a growing number of relevant specialists, in particular in engineering and manufacturing, to increase the effectiveness of the creation and diagnosis of appropriate technical solutions. In digital artificial intelligence systems, scientists endeavor to reproduce the innate intellectual abilities of humans and other organisms. In-depth studies of biological and self-organizing systems can provide new approaches to create more and more effective artificial intelligence methods. The topics of the included papers concern thematic materials in the following spheres: mathematics and computer algorithms; analysis of some technical solutions; technological. The book is a compilation of state-of-the-art papers in the field, covering a comprehensive range of subjects that are relevant to business managers and engineering professionals alike. The breadth and depth of these proceedings make them an excellent resource for asset management practitioners, researchers, and academics, as well as undergraduate and postgraduate students interested in artificial intelligence systems and their growing applications. Specialists, students, and other groups of people who want to know how artificial intelligence systems can be used in the future will be the target audience for this book.

Download or read book Surfaces and Interfaces of Metal Oxide Thin Films Multilayers Nanoparticles and Nano composites written by Alejandro G. Roca and published by Springer Nature. This book was released on 2021-09-20 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a general overview and current state of the art of different types of metal oxide nanomaterials, either in nanoparticles or thin film structure. It covers from the development and optimization of different nanofabrication/synthesis techniques for nanostructures which are currently the attention of the research community, the study of the structure and interactions by different characterization techniques of heterostructured materials and the final impact in different applications such as nanotherapy, data storage, super magnets, high-frequency devices. The book’s 13 chapters provide deep insight into the intriguing science of oxide materials and include contributions on novel technologies to fabricate nanomaterials with a broad range of functional properties (semiconducting, magnetic, ferroelectric, thermoelectric, optical, flexible and mechanical). This book is intended to the experts for consolidation of their knowledge but also for students who aim to learn and get basics of nanostructured metal oxides in diverse forms.

Download or read book Systems Decision and Control in Energy III written by Artur Zaporozhets and published by Springer Nature. This book was released on 2021-11-30 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes new energy saving methods and technologies for heat power engineering. The book is devoted to topical issues of energy and related industries. Leading Ukrainian scientists from both scientific institutes and educational universities took part in its creation. The research results are presented in 6 parts: electrical engineering, heat power engineering, nuclear power engineering, fossil fuels, cybersecurity and computer science, environmental safety. Results of regulating of operating modes and applicability of model checking technique in power systems are showed. Separate block of questions regarding the functioning of nuclear power plants, their waste and preventive measures of protection against negative effects on living organisms (including, for example, the Chernobyl nuclear power plant) is considered. The results of the peculiarities of the extraction, purification and use of fossil fuels are presented. In some chapters, presented the results on improving the cybersecurity of energy systems and its resilience to various threats, including the use of 5G technology. Traditionally for this series, issues of ecological safety, the impact of different energy systems on the environment and its protection are considered. A book is for researchers, engineers, as well as lecturers and postgraduates of higher education institutions dealing with energy sector, power systems, ecological safety, etc.