Download or read book Elevated Temperature Fatigue Creep Behavior of Nickel Base Superalloy IN 625 written by A. Biron and published by . This book was released on 1988 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: A research program has been carried out to establish the low-cycle fatigue and creep-fatigue behaviors of Inconel 625 at elevated temperatures (650 and 815°C). The main observations were related to the effect of temperature and of hold times. Under continuous cycling, a temperature increase from 650 to 815°C caused a reduction in the fatigue life by a factor of 2 at a high strain and by a factor of 3 at a low strain.

Download or read book Elevated Temperature Fatigue creep Behavior of Nickel base Superalloy in 625 written by and published by . This book was released on 1986 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superalloy Inconel 625 is a potential candidate material for use in structural components subjected to cyclic loadings at high temperatures, such as parts of jet engines and nuclear reactors. This report discusses the results of a research program carried out to provide the mechanical properties on the low-cycle fatigue and creep-fatigue behaviour of IN 625 at elevated temperatures (650 and 815C). Under continuous cycling, the data base of the material is established and the influence of hold-times introduced in each cycle (interspersed creep-fatigue) on the material life is then examined. A life prediction procedure recently suggested was applied to the data obtained under cyclic loading, with and without hold times. The overall correlation between isothermal experimental results and theoretical predictions is discussed.

Download or read book Low Cycle Fatigue written by Harvey D. Solomon and published by ASTM International. This book was released on 1988 with total page 1289 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.

Download or read book Structural Integrity Assessment written by Raghu V. Prakash and published by . This book was released on 2020 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains selected papers from the Second Quadrennial International Conference on Structural Integrity (ICONS-2018). The papers cover important topics related to structural integrity of critical installations, such as power plants, aircrafts, spacecrafts, defense and civilian components. The focus is on assuring safety of operations with high levels of reliability and structural integrity. This volume will be of interest to plant operators working with safety critical equipment, engineering solution providers, software professionals working on engineering analysis, as well as academics working in the area. .

Download or read book Superalloys 2012 written by Eric S. Huron and published by John Wiley & Sons. This book was released on 2012-10-02 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: A superalloy, or high-performance alloy, is an alloy that exhibits excellent mechanical strength at high temperatures. Superalloy development has been driven primarily by the aerospace and power industries. This compilation of papers from the Twelfth International Symposium on Superalloys, held from September 9-13, 2012, offers the most recent technical information on this class of materials.

Download or read book Deformation mechanism Maps written by H. J. Frost and published by Pergamon. This book was released on 1982 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Temperature Low Cycle Fatigue Mechanisms for a Nickel base and a Copper base Alloy written by Chin-I. Shih and published by . This book was released on 1982 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ASTM Special Technical Publication written by and published by . This book was released on 1988 with total page 1322 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fatigue Behavior of a Nickel Based Directionally Solidified Superalloy at Elevated Temperature written by Louis Domenic Terranova and published by . This book was released on 1989 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Superalloys written by Matthew J. Donachie and published by ASM International. This book was released on 2002 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers virtually all technical aspects related to the selection, processing, use, and analysis of superalloys. The text of this new second edition has been completely revised and expanded with many new figures and tables added. In developing this new edition, the focus has been on providing comprehensive and practical coverage of superalloys technology. Some highlights include the most complete and up-to-date presentation available on alloy melting. Coverage of alloy selection provides many tips and guidelines that the reader can use in identifying an appropriate alloy for a specific application. The relation of properties and microstructure is covered in more detail than in previous books.

Download or read book ASME Technical Papers written by and published by . This book was released on with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effect of Elevated Temperature Pre exposure on the Creep fatigue Crack Growth Behaviour of a Polycrystalline Nickel base Superalloy written by D. W. Hunt and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Superalloys 2020 written by Sammy Tin and published by Springer Nature. This book was released on 2020-08-28 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 14th International Symposium on Superalloys (Superalloys 2020) highlights technologies for lifecycle improvement of superalloys. In addition to the traditional focus areas of alloy development, processing, mechanical behavior, coatings, and environmental effects, this volume includes contributions from academia, supply chain, and product-user members of the superalloy community that highlight technologies that contribute to improving manufacturability, affordability, life prediction, and performance of superalloys.

Download or read book High Temperature Creep fatigue written by Ryuichi Ohtani and published by . This book was released on 1988 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effects of Environment on the Elevated Temperature Fatigue Behavior of Nickel Base Superalloy Single Crystals written by D. J. DUQUETTE and published by . This book was released on with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Welding Metallurgy and Weldability of Nickel Base Alloys written by John C. Lippold and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most up-to-date coverage of welding metallurgy aspects and weldability issues associated with Ni-base alloys Welding Metallurgy and Weldability of Nickel-Base Alloys describes the fundamental metallurgical principles that control the microstructure and properties of welded Ni-base alloys. It serves as a practical how-to guide that enables engineers to select the proper alloys, filler metals, heat treatments, and welding conditions to ensure that failures are avoided during fabrication and service. Chapter coverage includes: Alloying additions, phase diagrams, and phase stability Solid-solution strengthened Ni-base alloys Precipitation strengthened Ni-base alloys Oxide dispersion strengthened alloys and nickel aluminides Repair welding of Ni-base alloys Dissimilar welding Weldability testing High-chromium alloys used in nuclear power applications With its excellent balance between the fundamentals and practical problem solving, the book serves as an ideal reference for scientists, engineers, and technicians, as well as a textbook for undergraduate and graduate courses in welding metallurgy.