Download or read book Introduction to Printed Electronics written by Katsuaki Suganuma and published by Springer Science & Business Media. This book was released on 2014-01-24 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes in detail modern technologies for printed electronics, explaining how nanotechnology and modern printing technology are merging to revolutionize electronics fabrication of thin, lightweight, large and inexpensive products. Readers will benefit from the explanations of materials, devices and circuits used to design and implement the latest applications of printed electronics, such as thin flexible OLED displays, organic solar cells, OLED lighting, smart wallpaper, sensors, logic, memory and more.
Download or read book Advanced Materials for Printed Flexible Electronics written by Colin Tong and published by Springer Nature. This book was released on 2021-10-04 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to printed flexible electronics and their applications, including the basics of modern printing technologies, printable inks, performance characterization, device design, modeling, and fabrication processes. A wide range of materials used for printed flexible electronics are also covered in depth. Bridging the gap between the creation of structure and function, printed flexible electronics have been explored for manufacturing of flexible, stretchable, wearable, and conformal electronics device with conventional, 3D, and hybrid printing technologies. Advanced materials such as polymers, ceramics, nanoparticles, 2D materials, and nanocomposites have enabled a wide variety of applications, such as transparent conductive films, thin film transistors, printable solar cells, flexible energy harvesting and storage devices, electroluminescent devices, and wearable sensors. This book provides students, researchers and engineers with the information to understand the current status and future trends in printed flexible electronics, and acquire skills for selecting and using materials and additive manufacturing processes in the design of printed flexible electronics.
Download or read book Organic and Printed Electronics written by Giovanni Nisato and published by CRC Press. This book was released on 2016-04-27 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of organic and printed electronics is well established in terms of academic, scientific, and technological research but is still an emerging one in terms of mass industrial applications such as OLED displays and lighting and organic photovoltaics. This book provides a comprehensive introduction to organic and printed electronics, their fu
Download or read book Laser Printing of Functional Materials written by Alberto Piqué and published by John Wiley & Sons. This book was released on 2017-12-20 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book on this hot topic includes such major research areas as printed electronics, sensors, biomaterials and 3D cell printing. Well-structured and with a strong focus on applications, the text is divided in three sections with the first describing the fundamentals of laser transfer. The second provides an overview of the wide variety of materials that can be used for laser transfer processing, while the final section comprehensively discusses a number of practical uses, including printing of electronic materials, printing of 3D structures as well as large-area, high-throughput applications. The book is rounded off by a look at the future for laser printed materials. Invaluable reading for a broad audience ranging from material developers to mechanical engineers, from academic researchers to industrial developers and for those interested in the development of micro-scale additive manufacturing techniques.
Download or read book Printed Organic and Molecular Electronics written by Daniel R. Gamota and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Printed Organic And Molecular Electronics was compiled to create a reference that included existing knowledge from the most renowned industry, academic, and government experts in the fields of organic semiconductor technology, graphic arts printing, micro-contact printing, and molecular electronics. It is divided into sections that consist of the most critical topics required for one to develop a strong understanding of the states of these technologies and the paths for taking them from R&D to the hands of consumers on a massive scale. As such, the book provides both theory as well as technology development results and trends.
Download or read book Printed Electronics written by Ilgu Yun and published by . This book was released on 2016-09-28 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Printed Electronics written by Zheng Cui and published by John Wiley & Sons. This book was released on 2016-09-26 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the newly emerged and highly interdisciplinary field of printed electronics • Provides an overview of the latest developments and research results in the field of printed electronics • Topics addressed include: organic printable electronic materials, inorganic printable electronic materials, printing processes and equipments for electronic manufacturing, printable transistors, printable photovoltaic devices, printable lighting and display, encapsulation and packaging of printed electronic devices, and applications of printed electronics • Discusses the principles of the above topics, with support of examples and graphic illustrations • Serves both as an advanced introductory to the topic and as an aid for professional development into the new field • Includes end of chapter references and links to further reading
Download or read book The Chemistry of Printing Inks and Their Electronics and Medical Applications written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2014-10-09 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the chemistry of inkjet printing inks, as well to special applications of these materials. As is well-documented, this issue has literallyexploded in the literature in particular in the patent literature. After an introductory section to the general aspects of the field, the types and uses of inkjet printing inks are summarized followed by an overview on the testing methods. Special compounds used as additives dyes, and pigments in inkjet printing inks are documented. The applications to the medical field – drug delivery systems, tissue engineering, bioprinting in particular – are detailed. The applications in the electronics industry are also documented such as flexible electronics, integrated circuits, liquid crystal displays, along a description of their special inks. The book incorporates many structures of the organic compounds used for inkjet printing inks as they may not be familiar to the polymer and organic chemists.
Download or read book High Temperature Electronics written by F. Patrick McCluskey and published by CRC Press. This book was released on 2018-05-04 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of electronics that can operate at high temperatures has been identified as a critical technology for the next century. Increasingly, engineers will be called upon to design avionics, automotive, and geophysical electronic systems requiring components and packaging reliable to 200 °C and beyond. Until now, however, they have had no single resource on high temperature electronics to assist them. Such a resource is critically needed, since the design and manufacture of electronic components have now made it possible to design electronic systems that will operate reliably above the traditional temperature limit of 125 °C. However, successful system development efforts hinge on a firm understanding of the fundamentals of semiconductor physics and device processing, materials selection, package design, and thermal management, together with a knowledge of the intended application environments. High Temperature Electronics brings together this essential information and presents it for the first time in a unified way. Packaging and device engineers and technologists will find this book required reading for its coverage of the techniques and tradeoffs involved in materials selection, design, and thermal management and for its presentation of best design practices using actual fielded systems as examples. In addition, professors and students will find this book suitable for graduate-level courses because of its detailed level of explanation and its coverage of fundamental scientific concepts. Experts from the field of high temperature electronics have contributed to nine chapters covering topics ranging from semiconductor device selection to testing and final assembly.
Download or read book Handbook of Print Media written by Helmut Kipphan and published by Springer. This book was released on 2014-02-27 with total page 1221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Printers nowadays are having to learn new technologies if they are to remain competitive. This innovative, practical manual is specifically designed to cater to these training demands. Written by an expert in the field, the Handbook is unique in covering the entire spectrum of modern print media production. Despite its comprehensive treatment, it remains an easy-to-use, single-volume reference, with all the information clearly structured and readily retrievable. The author covers both traditional as well as computer-aided technologies in all stages of production, as well as electronic media and multimedia. He also deals with training, research, strategies and trends, showing readers how to implement the latest methods. With 1,200 pages, containing 1,500 illustrations - over half in colour - the Handbook conveys the current state of technology together with its specific terminology. The accompanying CD-ROM includes the entire manual in fully searchable form, plus additional software tools. Invaluable information for both beginners and "old hands" in printing works, publishing houses, trade associations, the graphics industry, and their suppliers.
Download or read book Inkjet Technology for Digital Fabrication written by Ian M. Hutchings and published by John Wiley & Sons. This book was released on 2012-11-09 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whilst inkjet technology is well-established on home and small office desktops and is now having increasing impact in commercial printing, it can also be used to deposit materials other than ink as individual droplets at a microscopic scale. This allows metals, ceramics, polymers and biological materials (including living cells) to be patterned on to substrates under precise digital control. This approach offers huge potential advantages for manufacturing, since inkjet methods can be used to generate structures and functions which cannot be attained in other ways. Beginning with an overview of the fundamentals, this bookcovers the key components, for example piezoelectric print-heads and fluids for inkjet printing, and the processes involved. It goes on to describe specific applications, e.g. MEMS, printed circuits, active and passive electronics, biopolymers and living cells, and additive manufacturing. Detailed case studies are included on flat-panel OLED displays, RFID (radio-frequency identification) manufacturing and tissue engineering, while a comprehensive examination of the current technologies and future directions of inkjet technology completes the coverage. With contributions from both academic researchers and leading names in the industry, Inkjet Technology for Digital Fabrication is a comprehensive resource for technical development engineers, researchers and students in inkjet technology and system development, and will also appeal to researchers in chemistry, physics, engineering, materials science and electronics.
Download or read book Mastering 3D Printing written by Joan Horvath and published by Apress. This book was released on 2014-09-18 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mastering 3D Printing shows you how to get the most out of your printer, including how to design models, choose materials, work with different printers, and integrate 3D printing with traditional prototyping to make techniques like sand casting more efficient. You've printed key chains. You've printed simple toys. Now you're ready to innovate with your 3D printer to start a business or teach and inspire others. Joan Horvath has been an educator, engineer, author, and startup 3D printing company team member. She shows you all of the technical details you need to know to go beyond simple model printing to make your 3D printer work for you as a prototyping device, a teaching tool, or a business machine.
Download or read book Applications of Organic and Printed Electronics written by Eugenio Cantatore and published by Springer Science & Business Media. This book was released on 2012-08-30 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on various "substrate independent, large throughput" technologies: techniques that are able to build electronics on cheap, low cost, flexible and temperature sensitive substrates, like PEN or other plastic foils, and using inexpensive and large throughput methods like printing. Most of these technologies, in fact, have the potential to enable the revolutionary applications that will be discussed in the book. The book therefore goes beyond "organic" technologies, i.e. technologies that use functional organic materials (namely semiconductors), to explore a broader and even more interesting area of research. The book presents a comprehensive landscape of the new applications enabled by substrate independent, high throughput electronic technologies and their business potential. It explains the link between innovation in technology and in products. It also provides the reader with a clear understanding of the technology and the research challenges in the field. The book is divided in two parts. The first is devoted to applications where the most important selling point is large area. To this domain belong roll-up, flexible and emissive displays based on organic devices (used in backplanes or as display medium), unobtrusive electronics enabling ambient intelligence applications, and the increasingly important photovoltaic applications. The second part is devoted to applications where cost reduction is the main factor. RFIDs, smart labels, organic sensors and printed sensor system belong to this domain. A chapter is devoted to each different application. Each chapter is originally developed for the book by (a group of) world-wide recognized experts in the specific field of application.
Download or read book Flexible Electronics written by William S. Wong and published by Springer Science & Business Media. This book was released on 2009-04-09 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent volume covers a range of materials used for flexible electronics, including semiconductors, dielectrics, and metals. The functional integration of these different materials is treated as well. Fundamental issues for both organic and inorganic materials systems are included. A corresponding overview of technological applications, based on each materials system, is presented to give both the non-specialist and the researcher in the field relevant information on the status of the flexible electronics area.
Download or read book Electronics for Kids written by Oyvind Nydal Dahl and published by No Starch Press. This book was released on 2016-07-15 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why do the lights in a house turn on when you flip a switch? How does a remote-controlled car move? And what makes lights on TVs and microwaves blink? The technology around you may seem like magic, but most of it wouldn’t run without electricity. Electronics for Kids demystifies electricity with a collection of awesome hands-on projects. In Part 1, you’ll learn how current, voltage, and circuits work by making a battery out of a lemon, turning a metal bolt into an electromagnet, and transforming a paper cup and some magnets into a spinning motor. In Part 2, you’ll make even more cool stuff as you: –Solder a blinking LED circuit with resistors, capacitors, and relays –Turn a circuit into a touch sensor using your finger as a resistor –Build an alarm clock triggered by the sunrise –Create a musical instrument that makes sci-fi soundsThen, in Part 3, you’ll learn about digital electronics—things like logic gates and memory circuits—as you make a secret code checker and an electronic coin flipper. Finally, you’ll use everything you’ve learned to make the LED Reaction Game—test your reaction time as you try to catch a blinking light!With its clear explanations and assortment of hands-on projects, Electronics for Kids will have you building your own circuits in no time.
Download or read book Inkjet based Micromanufacturing written by Oliver Brand and published by John Wiley & Sons. This book was released on 2012-04-16 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inkjet-based Micromanufacturing Inkjet technology goes way beyond putting ink on paper: it enables simpler, faster and more reliable manufacturing processes in the fields of micro- and nanotechnology. Modern inkjet heads are per se precision instruments that deposit droplets of fluids on a variety of surfaces in programmable, repeating patterns, allowing, after suitable modifications and adaptations, the manufacturing of devices such as thin-film transistors, polymer-based displays and photovoltaic elements. Moreover, inkjet technology facilitates the large-scale production of flexible RFID transponders needed, eg, for automated logistics and miniaturized sensors for applications in health surveillance. The book gives an introduction to inkjet-based micromanufacturing, followed by an overview of the underlying theories and models, which provides the basis for a full understanding and a successful usage of inkjet-based methods in current microsystems research and development Overview of Inkjet-based Micromanufacturing: Thermal Inkjet Theory and Modeling Post-Printing Processes for Inorganic Inks for Plastic Electronics Applications Inkjet Ink Formulations Inkjet Fabrication of Printed Circuit Boards Antennas for Radio Frequency Identification Tags Inkjet Printing for MEMS
Download or read book 3d Printing And Additive Manufacturing Of Electronics Principles And Applications written by Chee Kai Chua and published by World Scientific. This book was released on 2021-05-14 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D printed electronics have captured much attention in recent years, owing to their success in allowing on-demand fabrication of highly-customisable electronics on a wide variety of substrates and conformal surfaces. This textbook helps readers understand and gain valuable insights into 3D printed electronics. It does not require readers to have any prior knowledge on the subject.3D Printing and Additive Manufacturing of Electronics: Principles and Applications provides a comprehensive overview of the recent progress and discusses the fundamentals of the 3D printed electronics technologies, their respective advantages, shortcomings and potential applications. The book covers conventional contact printing techniques for printed electronics, 3D electronics printing techniques, materials and inks inks for 3D-printed electronics, substrates and processing for 3D-printed electronics, sintering techniques for metallic nanoparticle inks, designs and simulations, applications of 3D-printed electronics, and future trends. The book includes several related problems for the reader to test his or her understanding of the topics.This book is a good guide for anyone who is interested in the 3D printing of electronics. The book is also an effective textbook for undergraduate and graduate courses that aim to arm their students with a thorough understanding of the fundamentals of 3D printed electronics.Related Link(s)
