Download or read book Electronics for Resonant Sensors written by Kenneth Edward Wojciechowski and published by . This book was released on 2005 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micro and Smart Devices and Systems written by K. J. Vinoy and published by Springer. This book was released on 2014-05-21 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents cutting-edge research in the emerging fields of micro, nano and smart devices and systems from experts working in these fields over the last decade. Most of the contributors have built devices or systems or developed processes or algorithms in these areas. The book is a unique collection of chapters from different areas with a common theme and is immensely useful to academic researchers and practitioners in the industry who work in this field.
Download or read book Mechanical Microsensors written by M. Elwenspoek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on mechanical microsensors is based on a course organized by the Swiss Foundation for Research in Microtechnology (FSRM) in Neuchatel, Swit zerland, and developed and taught by the authors. Support by FSRM is herewith gratefully acknowledged. This book attempts to serve two purposes. First it gives an overview on me chanical microsensors (sensors for pressure, force, acceleration, angular rate and fluid flow, realized by silicon micromachining). Second, it serves as a textbook for engineers to give them a comprehensive introduction on the basic design issues of these sensors. Engineers active in sensor design are usually educated either in electrical engineering or mechanical engineering. These classical educa tional pro grams do not prepare the engineer for the challenging task of sensor design since sensors are instruments typically bridging the disciplines: one needs a rather deep understanding of both mechanics and electronics. Accordingly, the book contains discussion of the basic engineering sciences relevant to mechanical sensors, hopefully in a way that it is accessible for all colours of engineers. Engi rd th neering students in their 3 or 4 year should have enough knowledge to be able to follow the arguments presented in this book. In this sense, this book should be useful as textbook for students in courses on mechanical microsensors (as is CUf rently being done at the University ofTwente).
Download or read book Resonant MEMS written by Oliver Brand and published by John Wiley & Sons. This book was released on 2015-04-22 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of the AMN book series, this book covers the principles, modeling and implementation as well as applications of resonant MEMS from a unified viewpoint. It starts out with the fundamental equations and phenomena that govern the behavior of resonant MEMS and then gives a detailed overview of their implementation in capacitive, piezoelectric, thermal and organic devices, complemented by chapters addressing the packaging of the devices and their stability. The last part of the book is devoted to the cutting-edge applications of resonant MEMS such as inertial, chemical and biosensors, fluid properties sensors, timing devices and energy harvesting systems.
Download or read book Sensors for Next Generation Electronic Systems and Technologies written by P. Uma Sathyakam and published by CRC Press. This book was released on 2023-05-16 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text covers fiber optic sensors for biosensing and photo-detection, graphene and CNT-based sensors for glucose, cholesterol, and dopamine detection, and implantable sensors for detecting physiological, bio-electrical, biochemical, and metabolic changes in a comprehensive manner. It further presents a chapter on sensors for military and aerospace applications. It will be useful for senior undergraduate, graduate students, and academic researchers in the fields of electrical engineering, electronics, and communication engineering. The book Discusses implantable sensors for detecting physiological, bio-electrical, biochemical, and metabolic changes Covers applications of sensors in diverse fields including healthcare, industrial flow, consumer electronics, and military Includes experimental studies such as the detection of biomolecules using SPR sensors and electrochemical sensors for biomolecule detection Presents artificial neural networks (ANN) based industrial flow sensor modeling Highlights case studies on surface plasmon resonance sensors, MEMS-based fluidic sensors, and MEMS-based electrochemical gas sensors The text presents case studies on surface plasmon resonance sensors, MEMS-based fluidic sensors, and MEMS-based electrochemical gas sensors in a single volume. The text will be useful for senior undergraduate, graduate students, and academic researchers in the fields of electrical engineering, electronics, and communication engineering.
Download or read book MEMS and Nanotechnology Based Sensors and Devices for Communications Medical and Aerospace Applications written by A. R. Jha and published by CRC Press. This book was released on 2008-04-08 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The integration of microelectromechanical systems (MEMS) and nanotechnology (NT) in sensors and devices significantly reduces their weight, size, power consumption, and production costs. These sensors and devices can then play greater roles in defense operations, wireless communication, the diagnosis and treatment of disease, and many more applicat
Download or read book Resonant Microbeam Electronic Oscillators for Strain Sensing written by Yongchul Ahn and published by . This book was released on 1999 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to State of the Art Electron Devices written by Joachim N. Burghartz and published by John Wiley & Sons. This book was released on 2013-03-19 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner, 2013 PROSE Award, Engineering and Technology Concise, high quality and comparative overview of state-of-the-art electron device development, manufacturing technologies and applications Guide to State-of-the-Art Electron Devices marks the 60th anniversary of the IRE electron devices committee and the 35th anniversary of the IEEE Electron Devices Society, as such it defines the state-of-the-art of electron devices, as well as future directions across the entire field. Spans full range of electron device types such as photovoltaic devices, semiconductor manufacturing and VLSI technology and circuits, covered by IEEE Electron and Devices Society Contributed by internationally respected members of the electron devices community A timely desk reference with fully-integrated colour and a unique lay-out with sidebars to highlight the key terms Discusses the historical developments and speculates on future trends to give a more rounded picture of the topics covered A valuable resource R&D managers; engineers in the semiconductor industry; applied scientists; circuit designers; Masters students in power electronics; and members of the IEEE Electron Device Society.
Download or read book Flexible Electronics for Electric Vehicles written by Sanjeet Dwivedi and published by Springer Nature. This book was released on 2022-10-04 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles the refereed papers presented during the 2nd Flexible Electronics for Electric Vehicles (FlexEV - 2021). It presents the diligent work of the research community on flexible electronics applications in different allied fields of engineering - engineering materials to electrical engineering to electronics and communication engineering. The theoretical research concepts are supported with extensive reviews highlighting the trends in the possible and real-life applications of electric vehicles. This book will be useful for research scholars, electric vehicles professionals, driving system designers, and postgraduates from allied domains. This book incorporates economical and efficient electric vehicle driving and the latest innovations in electric vehicle technology with their paradigms and methods that employ knowledge in the research community.
Download or read book Handbook of Biosensors and Electronic Noses written by Erika Kress-Rogers and published by CRC Press. This book was released on 2024-11-01 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: In developing the electronic nose and biosensor devices, researchers not only copy biochemical pathways, but also use nature's approach to signal interpretation as a blueprint for man-made sensing systems. Commercial biosensors have demonstrated their benefits and practical applications, providing high sensitivity and selectivity, combined with a significant reduction in sample preparation assay time and the use of expensive reagents. The Handbook of Biosensors and Electronic Noses discusses design and optimization for the multitude of practical uses of these devices including:
Download or read book Physics of Semiconductor Devices written by K. N. Bhat and published by Alpha Science Int'l Ltd.. This book was released on 2004 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributed papers of the workshop held at IIT, Madras, in 2003.
Download or read book CMOS Cantilever Sensor Systems written by D. Lange and published by Springer Science & Business Media. This book was released on 2002-07-23 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the use of industrial CMOS processes to produce arrays of nanomechanical cantilever transducers with on-chip driving and signal conditioning circuitry. These cantilevers are familiar from Scanning Probe Microscopy (SPM) and allow the sensitive detection of physical quantities such as forces and mass changes. The book is divided into three parts. First fabrication aspects and the mechanisms of cantilever resonators are introduced. Of the possible driving and sensing mechanisms, electrothermal and magnetic excitation, as well as piezoresistive detection and the use of MOS transistors for the deflection detection are introduced. This is followed by two application examples: The use of resonant cantilevers for the mass-sensitive detection of volatile organic compounds, and force sensor arrays for parallel Scanning Atomic Force Microscopy (AFM) of large areas.
Download or read book Handbook of Force Transducers written by Dan Mihai Stefanescu and published by Springer Science & Business Media. This book was released on 2011-03-16 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part I introduces the basic "Principles and Methods of Force Measurement" according to a classification into a dozen of force transducers types: resistive, inductive, capacitive, piezoelectric, electromagnetic, electrodynamic, magnetoelastic, galvanomagnetic (Hall-effect), vibrating wires, (micro)resonators, acoustic and gyroscopic. Two special chapters refer to force balance techniques and to combined methods in force measurement. Part II discusses the "(Strain Gauge) Force Transducers Components", evolving from the classical force transducer to the digital / intelligent one, with the incorporation of three subsystems (sensors, electromechanics and informatics). The elastic element (EE) is the "heart" of the force transducer and basically determines its performance. A 12-type elastic element classification is proposed (stretched / compressed column or tube, bending beam, bending and/or torsion shaft, middle bent bar with fixed ends, shear beam, bending ring, yoke or frame, diaphragm, axial-stressed torus, axisymmetrical and voluminous EE), with emphasis on the optimum location of the strain gauges. The main properties of the associated Wheatstone bridge, best suited for the parametrical transducers, are examined, together with the appropriate electronic circuits for SGFTs. The handbook fills a gap in the field of Force Measurement, both experts and newcomers, no matter of their particular interest, finding a lot of useful and valuable subjects in the area of Force Transducers; in fact, it is the first specialized monograph in this inter- and multidisciplinary field.
Download or read book Magnetic Sensors and Devices written by Laurent A. Francis and published by CRC Press. This book was released on 2017-10-18 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents in-depth coverage of magnetic sensors in industrial applications. It is divided into three sections: devices and technology for magnetic sensing, industrial applications (automotive, navigation), and emerging applications. Topics include transmission speed sensor ICs, dynamic differential Hall ICs, chopped Hall switches, programmable linear output Hall sensors, low power Hall ICs, self-calibrating differential Hall ICs for wheel speed sensing, dynamic differential Hall ICs, uni- and bipolar Hall IC switches, chopped mono cell Hall ICs, and electromagnetic levitation.
Download or read book Resonant Tunneling written by Lev Baskin and published by Springer Nature. This book was released on 2021-03-03 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book studies electron resonant tunneling in two- and three-dimensional quantum waveguides of variable cross-sections in the time-independent approach. Mathematical models are suggested for the resonant tunneling and develop asymptotic and numerical approaches for investigating the models. Also, schemes are presented for several electronics devices based on the phenomenon of resonant tunneling. Compared to its first edition, this book includes four new chapters, redistributes the content between chapters and modifies the estimates of the remainders in the asymptotics of resonant tunneling characteristics. The book is addressed to mathematicians, physicists, and engineers interested in waveguide theory and its applications in electronics.
Download or read book From MEMS to Bio MEMS and Bio NEMS written by Marc J. Madou and published by CRC Press. This book was released on 2011-06-13 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: From MEMS to Bio-MEMS and Bio-NEMS: Manufacturing Techniques and Applications details manufacturing techniques applicable to bionanotechnology. After reviewing MEMS techniques, materials, and modeling, the author covers nanofabrication, genetically engineered proteins, artificial cells, nanochemistry, and self-assembly. He also discusses scaling laws in MEMS and NEMS, actuators, fluidics, and power and brains in miniature devices. He concludes with coverage of various MEMS and NEMS applications. Fully illustrated in color, the text contains end-of-chapter problems, worked examples, extensive references for further reading, and an extensive glossary of terms. Details the Nanotechnology, Biology, and Manufacturing Techniques Applicable to Bionanotechnology Topics include: Nonlithography manufacturing techniques with lithography-based methods Nature as an engineering guide and contrasts top-down and bottom-up approaches Packaging, assembly, and self-assembly from ICs to DNA and biological cells Selected new MEMS and NEMS processes and materials, metrology techniques, and modeling Scaling laws, actuators, power generation, and the implementation of brains in miniaturizes devices Different strategies for making micromachines smarter The transition out of the laboratory and into the marketplace The third volume in Fundamentals of Microfabrication and Nanotechnology, Third Edition, Three-Volume Set, the book discusses top-down and bottom-up manufacturing methods and explains how to use nature as a guide. It provides a better understanding of how to match different manufacturing options with a given application that students can use to identify additional killer MEMS and NEMS applications. Other volumes in the set include: Solid-State Physics, Fluidics, and Analytical Techniques in Micro- and Nanotechnology Manufacturing Techniques for Microfabrication and Nanotechnology
Download or read book Breath Analysis written by Giorgio Pennazza and published by Academic Press. This book was released on 2018-11-29 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Breath Analysis presents state-of-the-art research in this specialized field, also offering guidance on how best to design the technology and conduct analysis. The book primarily focuses on the diagnosis of lung cancer, asthma and Chronic Obstructive Pulmonary Diseases. The reliability, consistency and utility of the results from breath analysis depends on exhaled breath sampling procedures and tools, gas sensor array technology (sensing material and transducer), and finally, medical pertinence and interpretation. The book gives step-by-step procedures and discusses best practice solutions for problems in sample collection, sensor technology, clinical assessment, medical interpretation and data analysis. The book's primary audience would include biomedical engineers and medical doctors, but it is also useful for hospital technicians, hospital and biomedical SME leading figures, and those in PhD level Engineering and Medicine. - Presents an overview of existing breath analysis technology, along with their pros and cons - Provides a tool for mapping, bridging and translating different approaches and available devices - Covers best practices and procedures for exhaled breath collection
