Download or read book Electronics and Signal Processing written by Wensong Hu and published by Springer Science & Business Media. This book was released on 2011-06-21 with total page 1015 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes extended and revised versions of a set of selected papers from the International Conference on Electric and Electronics (EEIC 2011) , held on June 20-22 , 2011, which is jointly organized by Nanchang University, Springer, and IEEE IAS Nanchang Chapter. The objective of EEIC 2011 Volume 1 is to provide a major interdisciplinary forum for the presentation of new approaches from Electronics and Signal Processing, to foster integration of the latest developments in scientific research. 133 related topic papers were selected into this volume. All the papers were reviewed by 2 program committee members and selected by the volume editor Prof. Wensong Hu. We hope every participant can have a good opportunity to exchange their research ideas and results and to discuss the state of the art in the areas of the Electronics and Signal Processing.
Download or read book Digital Signal Processing in Power Electronics Control Circuits written by Krzysztof Sozański and published by Springer Science & Business Media. This book was released on 2013-07-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many digital control circuits in current literature are described using analog transmittance. This may not always be acceptable, especially if the sampling frequency and power transistor switching frequencies are close to the band of interest. Therefore, a digital circuit is considered as a digital controller rather than an analog circuit. This helps to avoid errors and instability in high frequency components. Digital Signal Processing in Power Electronics Control Circuits covers problems concerning the design and realization of digital control algorithms for power electronics circuits using digital signal processing (DSP) methods. This book bridges the gap between power electronics and DSP. The following realizations of digital control circuits are considered: digital signal processors, microprocessors, microcontrollers, programmable digital circuits. Discussed in this book is signal processing, starting from analog signal acquisition, through its conversion to digital form, methods of its filtration and separation, and ending with pulse control of output power transistors. The book is focused on two applications for the considered methods of digital signal processing: an active power filter and a digital class D power amplifier. The major benefit to readers is the acquisition of specific knowledge concerning discussions on the processing of signals from voltage or current sensors using a digital signal processor and to the signals controlling the output inverter transistors. Included are some Matlab examples for illustration of the considered problems.
Download or read book Electronic Devices for Analog Signal Processing written by Yu. K. Rybin and published by Springer Science & Business Media. This book was released on 2011-10-13 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic Devices for Analog Signal Processing is intended for engineers and post graduates and considers electronic devices applied to process analog signals in instrument making, automation, measurements, and other branches of technology. They perform various transformations of electrical signals: scaling, integration, logarithming, etc. The need in their deeper study is caused, on the one hand, by the extension of the forms of the input signal and increasing accuracy and performance of such devices, and on the other hand, new devices constantly emerge and are already widely used in practice, but no information about them are written in books on electronics. The basic approach of presenting the material in Electronic Devices for Analog Signal Processing can be formulated as follows: the study with help from self-education. While divided into seven chapters, each chapter contains theoretical material, examples of practical problems, questions and tests. The most difficult questions are marked by a diamond and can be given to advanced readers. Paragraphs marked by /// are very important for the understanding of the studied material and together they can serve a brief summary of a section. The text marked by italic indicates new or non-traditional concepts. Calculated examples are indicated by >. The main goal of Electronic Devices for Analog Signal Processing is not only to give some knowledge on modern electronic devices, but also to inspire readers on the more detailed study of these devices, understanding of their operation, ability to analyze circuits, synthesize new devices, and assess the possibilities of their application for solution of particular practical problems.
Download or read book Digital Filters and Signal Processing in Electronic Engineering written by S M Bozic and published by Elsevier. This book was released on 1998-10-01 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: From industrial and teaching experience the authors provide a blend of theory and practice of digital signal processing (DSP) for advanced undergraduate and post-graduate engineers reading electronics. This fast-moving, developing area is driven by the information technology revolution. It is a source book in research and development for embedded system design engineers, designers in real-time computing, and applied mathematicians who apph DSP techniques in telecommunications, aerospace (control systems), satellite communications, instrumentation, and medical technology (ultrasound and magnetic resonance imaging).The book is particularly useful at the hardware end of DSP, with its emphasis on practical I)SP devices and the integration of basic processes with appropriate software. It is unique to find in one volume the implementation of the equations as algorithms, not only in \IATLAB but right up to a working DSP-based scheme. Other relevant architectural features include number representations, multiply-accumulate, special addressing modes, zero overhead iteration schemes. and single and multiple nlicroprocessors which will allow the readers to compare and understand both current processors and future DSP developments.Fundamental signal processing procedures are introduced and developed: also convolution. correlation, the Discrete Fourier Transform and its fast computation algorithms. Then follo finite impulse response (FIR) filters, infinite impulse response (IlR) filters, multirate filters, adaptive filters, and topics from communication and control. I)esign examples are given in all of these cases, taken through an algorithm testing stage using MATLAB. The design of the latter. using C language models, is explained together with the experimental results of real time integer implementations.Academic prerequisites are first and second year university mathematics, an introductor knowledge of circuit theor ‘and microprocessors. and C Language. Provides an unusual blend of theory and practice of digital signal processing (DSP) Discusses fundamental signal processing procedures, convolution, correlation, the Discrete Fourier Transform and its fast computation algorithms Includes number representations, multiply-accumulate, special addressing modes, zero overhead iteration schemes, and single and multiple instructions
Download or read book Signal Processing and Analysis of Electrical Circuit written by Adam Glowacz and published by MDPI. This book was released on 2020-03-13 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue with 35 published articles shows the significance of the topic “Signal Processing and Analysis of Electrical Circuit”. This topic has been gaining increasing attention in recent times. The presented articles can be categorized into four different areas: signal processing and analysis methods of electrical circuits; electrical measurement technology; applications of signal processing of electrical equipment; fault diagnosis of electrical circuits. It is a fact that the development of electrical systems, signal processing methods, and circuits has been accelerating. Electronics applications related to electrical circuits and signal processing methods have gained noticeable attention in recent times. The methods of signal processing and electrical circuits are widely used by engineers and scientists all over the world. The constituent papers represent a significant contribution to electronics and present applications that can be used in industry. Further improvements to the presented approaches are required for realizing their full potential.
Download or read book Programs for Digital Signal Processing written by IEEE Acoustics, Speech, and Signal Processing Society. Digital Signal Processing Committee and published by . This book was released on 1979 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Briefly describes the physical characteristics, the habitat, and the behavior of the Alaskan brown bear.
Download or read book Circuits Systems and Signal Processing written by Suhash Chandra Dutta Roy and published by Springer. This book was released on 2018-03-24 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of tutorial-like chapters on all core topics of signals and systems and the electronic circuits. All the topics dealt with in the book are parts of the core syllabi of standard programs in Electrical Engineering, Electrical and Computer Engineering, and Electronics and Telecommunication Engineering domains. This book is intended to serve as a secondary reader or supplementary text for core courses in the area of signals and systems, electronic circuits, and analog and digital signal processing. When studying or teaching a particular topic, the students and instructors of such courses would find it interesting and worthwhile to study the related tutorial chapter in this book in order to enhance their understanding of the fundamentals, simplification of procedures, alternative approaches and relation to other associated topics. In addition, the book can also be used as a primary or secondary text in short-term or refresher courses, and as a self-study guide for professionals wishing to gain a comprehensive review of the signals and systems domain.
Download or read book Introduction to Digital Signal Processing written by Robert Meddins and published by Newnes. This book was released on 2000-09-05 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Digital Signal Processing covers the basic theory and practice of digital signal processing (DSP) at an introductory level. As with all volumes in the Essential Electronics Series, this book retains the unique formula of minimal mathematics and straightforward explanations. The author has included examples throughout of the standard software design package, MATLAB and screen dumps are used widely throughout to illustrate the text. Ideal for students on degree and diploma level courses in electric and electronic engineering, 'Introduction to Digital Signal Processing' contains numerous worked examples throughout as well as further problems with solutions to enable students to work both independently and in conjunction with their course. Assumes only minimum knowledge of mathematics and electronics Concise and written in a straightforward and accessible style Packed with worked examples, exercises and self-assesment questions
Download or read book Microelectronics and Signal Processing written by Sanket Goel and published by CRC Press. This book was released on 2021-06-06 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses state-of-the-art and the realization of the integrated device to test the amplification proposal of a synthetic nucleic acid template. It covers the control algorithm for designing the Maximum Power Point Tracker (MPPT) enabled electrical interface system. Discusses designing and generating new metasurface antenna for future applications. Covers integration of optical structures with MEMS devices for implementation in Photonic Integrated Circuits. Presents state-of-art in-exact multiplier architectures and their efficient implementation.
Download or read book Analog Electronics written by David Crecraft and published by Elsevier. This book was released on 2002-05-21 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The content has been carefully designed to meet the requirements of first and second year students of electronic engineering, communications engineering and telecommunications, following full honours degree programs or two-year courses including HNC/HND. A completely new analog electronics textbook for the digital age Coverage ideal for courses with a communications / wireless focus
Download or read book Applied Signal Processing written by Nadder Hamdy and published by CRC Press. This book was released on 2008-07-25 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classical signal processing techniques are based primarily on the analog nature of all signals. However, the continuously improving performance of digital circuitry and processors has prompted a switch to digital signal processing techniques rather than the traditional analog ones. Applied Signal Processing recognizes the linkage between
Download or read book Digital Audio Signal Processing written by Udo Zölzer and published by John Wiley & Sons. This book was released on 2022-02-24 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Audio Signal Processing The fully revised new edition of the popular textbook, featuring additional MATLAB exercises and new algorithms for processing digital audio signals Digital Audio Signal Processing (DASP) techniques are used in a variety of applications, ranging from audio streaming and computer-generated music to real-time signal processing and virtual sound processing. Digital Audio Signal Processing provides clear and accessible coverage of the fundamental principles and practical applications of digital audio processing and coding. Throughout the book, the authors explain a wide range of basic audio processing techniques and highlight new directions for automatic tuning of different algorithms and discuss state- of-the-art DASP approaches. Now in its third edition, this popular guide is fully updated with the latest signal processing algorithms for audio processing. Entirely new chapters cover nonlinear processing, Machine Learning (ML) for audio applications, distortion, soft/hard clipping, overdrive, equalizers and delay effects, sampling and reconstruction, and more. Covers the fundamentals of quantization, filters, dynamic range control, room simulation, sampling rate conversion, and audio coding Describes DASP techniques, their theoretical foundations, and their practical applications Discusses modern studio technology, digital transmission systems, storage media, and home entertainment audio components Features a new introductory chapter and extensively revised content throughout Provides updated application examples and computer-based activities supported with MATLAB exercises and interactive JavaScript applets via an author-hosted companion website Balancing essential concepts and technological topics, Digital Audio Signal Processing, Third Edition remains the ideal textbook for advanced music technology and engineering students in audio signal processing courses. It is also an invaluable reference for audio engineers, hardware and software developers, and researchers in both academia and industry.
Download or read book Digital Signal Processing written by Lizhe Tan and published by Academic Press. This book was released on 2013-01-21 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Signal Processing, Second Edition enables electrical engineers and technicians in the fields of biomedical, computer, and electronics engineering to master the essential fundamentals of DSP principles and practice. Many instructive worked examples are used to illustrate the material, and the use of mathematics is minimized for easier grasp of concepts. As such, this title is also useful to undergraduates in electrical engineering, and as a reference for science students and practicing engineers. The book goes beyond DSP theory, to show implementation of algorithms in hardware and software. Additional topics covered include adaptive filtering with noise reduction and echo cancellations, speech compression, signal sampling, digital filter realizations, filter design, multimedia applications, over-sampling, etc. More advanced topics are also covered, such as adaptive filters, speech compression such as PCM, u-law, ADPCM, and multi-rate DSP and over-sampling ADC. New to this edition: MATLAB projects dealing with practical applications added throughout the book New chapter (chapter 13) covering sub-band coding and wavelet transforms, methods that have become popular in the DSP field New applications included in many chapters, including applications of DFT to seismic signals, electrocardiography data, and vibration signals All real-time C programs revised for the TMS320C6713 DSK Covers DSP principles with emphasis on communications and control applications Chapter objectives, worked examples, and end-of-chapter exercises aid the reader in grasping key concepts and solving related problems Website with MATLAB programs for simulation and C programs for real-time DSP
Download or read book Applications in Time Frequency Signal Processing written by Antonia Papandreou-Suppappola and published by CRC Press. This book was released on 2018-10-03 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because most real-world signals, including speech, sonar, communication, and biological signals, are non-stationary, traditional signal analysis tools such as Fourier transforms are of limited use because they do not provide easily accessible information about the localization of a given frequency component. A more suitable approach for those studying non-stationary signals is the use of time frequency representations that are functions of both time and frequency. Applications in Time-Frequency Signal Processing investigates the use of various time-frequency representations, such as the Wigner distribution and the spectrogram, in diverse application areas. Other books tend to focus on theoretical development. This book differs by highlighting particular applications of time-frequency representations and demonstrating how to use them. It also provides pseudo-code of the computational algorithms for these representations so that you can apply them to your own specific problems. Written by leaders in the field, this book offers the opportunity to learn from experts. Time-Frequency Representation (TFR) algorithms are simplified, enabling you to understand the complex theories behind TFRs and easily implement them. The numerous examples and figures, review of concepts, and extensive references allow for easy learning and application of the various time-frequency representations.
Download or read book Advances in VLSI Signal Processing Power Electronics IoT Communication and Embedded Systems written by Shubhakar Kalya and published by Springer Nature. This book was released on 2021-04-10 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select peer-reviewed papers from the International Conference on VLSI, Signal Processing, Power Electronics, IoT, Communication and Embedded Systems (VSPICE-2020). The book provides insights into various aspects of the emerging fields in the areas Electronics and Communication Engineering as a holistic approach. The various topics covered in this book include VLSI, embedded systems, signal processing, communication, power electronics and internet of things. This book mainly focuses on the most recent innovations, trends, concerns and practical challenges and their solutions. This book will be useful for academicians, professionals and researchers in the area of electronics and communications and electrical engineering.
Download or read book Intelligent Systems and Signal Processing in Power Engineering written by Abhisek Ukil and published by Springer Science & Business Media. This book was released on 2007-09-23 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly experienced author sets out to build a bridge between two inter-disciplinary power engineering practices. The book looks into two major fields used in modern power systems: intelligent systems and the signal processing. The intelligent systems section comprises fuzzy logic, neural network and support vector machine. The author looks at relevant theories on the topics without assuming much particular background. Following the theoretical basics, he studies their applications in various problems in power engineering, like, load forecasting, phase balancing, or disturbance analysis.
Download or read book One Dimensional Digital Signal Processing written by Chi-Tsong Chen and published by CRC Press. This book was released on 1979-11-01 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:
