Download or read book Electronic Properties of Surfaces written by Prutton and published by Routledge. This book was released on 2018-02-06 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years the availability of techniques and the asking of basic and technological questions has led to an international explosion of activity in the study of solid surfaces. Originally published in Reports in Progress in Physics, Electronic Properties of Surfaces reflects the modern knowledge in this field, presenting critical appraisals of progress in surface science. The book should be particularly valuable for researchers new to this field.
Download or read book Electronic Properties of Materials written by Rolf E. Hummel and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book on electrical, optical, magnetic and thermal properties of materials is in many aspects different from other introductory texts in solid state physics. First of all, this book is written for engineers, particularly materials and electrical engineers who want to gain a fundamental under standing of semiconductor devices, magnetic materials, lasers, alloys, etc. Second, it stresses concepts rather than mathematical formalism, which should make the presentation relatively easy to understand. Thus, this book provides a thorough preparation for advanced texts, monographs, or special ized journal articles. Third, this book is not an encyclopedia. The selection oftopics is restricted to material which is considered to be essential and which can be covered in a 15-week semester course. For those professors who want to teach a two-semester course, supplemental topics can be found which deepen the understanding. (These sections are marked by an asterisk [*]. ) Fourth, the present text leaves the teaching of crystallography, X-ray diffrac tion, diffusion, lattice defects, etc. , to those courses which specialize in these subjects. As a rule, engineering students learn this material at the beginning of their upper division curriculum. The reader is, however, reminded of some of these topics whenever the need arises. Fifth, this book is distinctly divided into five self-contained parts which may be read independently.
Download or read book Electronic Structure of Disordered Alloys Surfaces and Interfaces written by Ilja Turek and published by Springer Science & Business Media. This book was released on 1997 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the study of basic electronic and magnetic properties of complex materials such as alloys, their surfaces, interfaces, and extended defects. Part I explores theoretical background, with chapters on the linear muffin-tin orbital method, Green function method, coherent potential approximation, self- consistency within atomic sphere approximation, and relativistic theory. Part II is devoted to applications including magnetic properties, numerical implementation, and interatomic interactions in alloys. Of interest to researchers in solid state theory, surface science, and computational materials research. Annotation copyrighted by Book News, Inc., Portland, OR.
Download or read book Introduction to the Electronic Properties of Materials 2nd Edition written by David C. Jiles and published by CRC Press. This book was released on 2001-10-24 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic materials provide the basis for many high tech industries that have changed rapidly in recent years. In this fully revised and updated second edition, the author discusses the range of available materials and their technological applications. Introduction to the Electronic Properties of Materials, 2nd Edition presents the principles of the behavior of electrons in materials and develops a basic understanding with minimal technical detail. Broadly based, it touches on all of the key issues in the field and offers a multidisciplinary approach spanning physics, electrical engineering, and materials science. It provides an understanding of the behavior of electrons within materials, how electrons determine the magnetic thermal, optical and electrical properties of materials, and how electronic properties are controlled for use in technological applications. Although some mathematics is essential in this area, the mathematics that is used is easy to follow and kept to an appropriate level for the reader. An excellent introductory text for undergraduate students, this book is a broad introduction to the topic and provides a careful balance of information that will be appropriate for physicists, materials scientists, and electrical engineers.
Download or read book Semiconductor Surfaces and Interfaces written by Winfried Mönch and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor Surfaces and Interfaces deals with structural and electronic properties of semiconductor surfaces and interfaces. The first part introduces the general aspects of space-charge layers, of clean-surface and adatom-included surfaces states, and of interface states. It is followed by a presentation of experimental results on clean and adatom-covered surfaces which are explained in terms of simple physical and chemical concepts and models. Where available, results of more refined calculations are considered. A final chapter is devoted to the band lineup at semiconductor interfaces.
Download or read book Optical Properties of Surfaces written by Dick Bedeaux and published by World Scientific. This book was released on 2004 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This invaluable book represents a substantial body of work describing the theory of the optical properties of thin island films and rough surfaces. In both cases the feature sizes are small compared to the wavelength of light. The approach is extremely rigorous and theoretically very thorough. The reflection, transmission and absorption of light are described. Computer programs that provide exact solutions for theoretical properties of thin island films are available, and this makes the book of great practical use. The early chapters present a comprehensive theoretical framework. In this new edition a chapter on reflection from gyrotropic media has been added. Contributions due to the gyrotropic nature of the interfacial layer are discussed.
Download or read book Handbook of Electrochemistry written by Cynthia G. Zoski and published by Elsevier. This book was released on 2007-02-07 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemistry plays a key role in a broad range of research and applied areas including the exploration of new inorganic and organic compounds, biochemical and biological systems, corrosion, energy applications involving fuel cells and solar cells, and nanoscale investigations. The Handbook of Electrochemistry serves as a source of electrochemical information, providing details of experimental considerations, representative calculations, and illustrations of the possibilities available in electrochemical experimentation. The book is divided into five parts: Fundamentals, Laboratory Practical, Techniques, Applications, and Data. The first section covers the fundamentals of electrochemistry which are essential for everyone working in the field, presenting an overview of electrochemical conventions, terminology, fundamental equations, and electrochemical cells, experiments, literature, textbooks, and specialized books. Part 2 focuses on the different laboratory aspects of electrochemistry which is followed by a review of the various electrochemical techniques ranging from classical experiments to scanning electrochemical microscopy, electrogenerated chemiluminesence and spectroelectrochemistry. Applications of electrochemistry include electrode kinetic determinations, unique aspects of metal deposition, and electrochemistry in small places and at novel interfaces and these are detailed in Part 4. The remaining three chapters provide useful electrochemical data and information involving electrode potentials, diffusion coefficients, and methods used in measuring liquid junction potentials. * serves as a source of electrochemical information * includes useful electrochemical data and information involving electrode potentials, diffusion coefficients, and methods used in measuring liquid junction potentials * reviews electrochemical techniques (incl. scanning electrochemical microscopy, electrogenerated chemiluminesence and spectroelectrochemistry)
Download or read book Surfaces and Interfaces of Solids written by Hans Lüth and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Surfaces and Interfaces of Solids" emphasizes both experimental and theoretical aspects of surface and interface physics. Beside the techniques of preparing well-defined solid surfaces and interfaces basic models for the description of structural, vibronic and electronic properties ofinterfaces are described, as well as fundamental aspects of adsorption and layer growth. Because of its importance for modern microelectronics special emphasis is placed on the electronic properties of semiconductorinterfaces and heterostructures. Experimental topics covering the basics of ultrahigh-vacuum technology, electron optics, surface spectroscopies and electrical interface characterization techniques are presented in the form of separate panels.
Download or read book Metal Surface Electron Physics written by A. Kiejna and published by Elsevier. This book was released on 1996-03-15 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last thirty years metal surface physics, or generally surface science, has come a long way due to the development of vacuum technology and the new surface sensitive probes on the experimental side and new methods and powerful computational techniques on the theoretical side. The aim of this book is to introduce the reader to the essential theoretical aspects of the atomic and electronic structure of metal surfaces and interfaces. The book gives some theoretical background to students of experimental and theoretical physics to allow further exploration into research in metal surface physics.The book consists of three parts. The first part is devoted to classical description of geometry and structure of metal crystals and their surfaces and surface thermodynamics including properties of small metallic particles. Part two deals with quantum-mechanical description of electronic properties of simple metals. It starts from the free electron gas description and introduces the many body effects in the framework of the density functional theory, in order to discuss the basic surface electronic properties of simple metals. This part outlines also properties of alloy surfaces, the quantum size effect and small metal clusters. Part three gives a succinct description of metal surfaces in contact with foreign atoms and surfaces. It treats the work function changes due to alkali metal adsorption on metals, adhesion between metals and discusses the universal aspects of the binding energy curves. In each case extensive reference lists are provided.
Download or read book Electronic Structure and Electronic Transitions in Layered Materials written by V. Grasso and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume in the series Physics and Chemistry of Materials with Layered Structures satisfies the need for a comprehensive review of the progress made in the decade 1972-1982 in the field of the electronic properties of layer compounds. Some recent theoretical and experimental developments are highlighted by authori tative physicists active in current research. The previous books of this series covering similar topics are volumes 3 and 4. The present review is mainly intended to fulfill the gap up to 1982 and part of 1983. I am indebted to all the authors for their friendly co-operation and continuous effort in preparing the contributions in their own fields of competence. I am sure that both the expertise scientists and the beginners in the field of the electronic properties of layered materials will find this book a valuable tool for their research work. Warm thanks are due to Prof. E. Mooser, General Editor of the series, for his constant and authoritative advice. * * * This book has been conceived as a tribute to Prof. Franco Bassani to whom the Italian tradition in the field of layer compounds, as well as in other fields of solid state physics, owes much. The authors of this review have all benefited at some time of their professional life from close cooperation with him. Istituto di Struttura della Materia, VINCENZO GRASSO Universitd di Messina IX V Grasso (ed.). Electronic Structure and Electronic Transitions in Layered Materials. ix.
Download or read book Electronic Structure and Surfaces of Sulfide Minerals written by Jianhua Chen and published by Elsevier. This book was released on 2020-04-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic Structure and Surfaces of Sulfide Minerals: Density Functional Theory and Applications examines the mineral structure and electronic properties of minerals and their relationship to mineral floatability by density functional theory (DFT). This pragmatic guide explores the role of minerals in flotation by focusing on the mineral surface structure, electronic properties, and the adsorption of flotation agents through the study of the microscopic mechanism of reagents from the structure and properties of minerals. The flotation mechanism is explained from the point-of-view of solid physics, which is of great significance for both theoretical research and practical applications. The study of the structure and properties of the minerals can reveal the essential nature of mineral flotation, hence why minerals have floatability, the mechanism of response of different minerals to different chemicals, and the origin of the selectivity of flotation agents.
Download or read book Electronic Processes on Semiconductor Surfaces During Chemisorption written by Fedor Fedorovich Volʹkenshteĭn and published by Springer. This book was released on 1991-01-31 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Hands are useless if there are no eyes to see what is obvious." -M. V. Lomonosov Dear Reader, I invite you to open this book and step on the semiconductor surface, where the processes that form the subject of the book come into play. The surface of the semiconductor is attracting more and more interest among researchers, in fact researchers in two different fields. These are notably the physicists and engineers engaged in research in semi conductor physics and the making of semiconductor devices. The entire industry of semiconductor instruments hinges on the problem of the surface. The quality of semiconductor devices, whose use is growing steadily, depends essentially on the properties of the surface. The instability of these properties and their uncon trollable alterations with temperature and under the influence of environmental conditions result in a lack of stability in the performance of semiconductor devices, hence the high percentage of waste in their industrial production. The methods used in factory laboratories to prevent such waste are largely empirical. The properties of the surface, the nature of the physicochemical processes that take place on it, and the role of environmental factors still remain obscure. A major task of the semiconductor industry is to learn to control the properties of the surface.
Download or read book Metal Clusters at Surfaces written by Karl-Heinz Meiwes-Broer and published by Springer Science & Business Media. This book was released on 2000-04-05 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerous experiments and calculations have shown that isolated metal clusters possess many interesting features, quite different from those known from surface and solid- state physics or from atomic and molecular physics. The technological exploitation of these new properties, e.g. in miniature electronic or mechanical components, requires the cluster to be brought into an environment such as an encapsulating matrix or a surface. Due to the interaction with the contact medium, the properties of the clusters may change or even disappear. Thus the physics of cluster-on-surface systems -- the main subject of this book -- is of fundamental importance. The book addresses a wide audience, from the newcomer to the expert. Starting from fundamental concepts of adsorbate-surface interactions, the modification of electronic properties through electron confinement, and concepts of cluster production, it elucidates the distinct properties of the new metallic nanostructures.
Download or read book Theoretical Modelling Of Semiconductor Surfaces written by G P Srivastava and published by World Scientific. This book was released on 1999-11-22 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: The state-of-the-art theoretical studies of ground state properties, electronic states and atomic vibrations for bulk semiconductors and their surfaces by the application of the pseudopotential method are discussed. Studies of bulk and surface phonon modes have been extended by the application of the phenomenological bond charge model. The coverage of the material, especially of the rapidly growing and technologically important topics of surface reconstruction and chemisorption, is up-to-date and beyond what is currently available in book form. Although theoretical in nature, the book provides a good deal of discussion of available experimental results. Each chapter provides an adequate list of references, relevant for both theoretical and experimental studies. The presentation is coherent and self-contained, and is aimed at the postgraduate and postdoctoral levels.
Download or read book Electronic Properties of Semiconductor Interfaces written by Winfried Mönch and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using the continuum of interface-induced gap states (IFIGS) as a unifying theme, Mönch explains the band-structure lineup at all types of semiconductor interfaces. These intrinsic IFIGS are the wave-function tails of electron states, which overlap a semiconductor band-gap exactly at the interface, so they originate from the quantum-mechanical tunnel effect. He shows that a more chemical view relates the IFIGS to the partial ionic character of the covalent interface-bonds and that the charge transfer across the interface may be modeled by generalizing Pauling?s electronegativity concept. The IFIGS-and-electronegativity theory is used to quantitatively explain the barrier heights and band offsets of well-characterized Schottky contacts and semiconductor heterostructures, respectively.
Download or read book Surfaces and Interfaces of Electronic Materials written by Leonard J. Brillson and published by John Wiley & Sons. This book was released on 2012-06-26 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced level textbook covering geometric, chemical, and electronic structure of electronic materials, and their applications to devices based on semiconductor surfaces, metal-semiconductor interfaces, and semiconductor heterojunctions. Starting with the fundamentals of electrical measurements on semiconductor interfaces, it then describes the importance of controlling macroscopic electrical properties by atomic-scale techniques. Subsequent chapters present the wide range of surface and interface techniques available to characterize electronic, optical, chemical, and structural properties of electronic materials, including semiconductors, insulators, nanostructures, and organics. The essential physics and chemistry underlying each technique is described in sufficient depth with references to the most authoritative sources for more exhaustive discussions, while numerous examples are provided throughout to illustrate the applications of each technique. With its general reading lists, extensive citations to the text, and problem sets appended to all chapters, this is ideal for students of electrical engineering, physics and materials science. It equally serves as a reference for physicists, material science and electrical and electronic engineers involved in surface and interface science, semiconductor processing, and device modeling and design. This is a coproduction of Wiley and IEEE * Free solutions manual available for lecturers at www.wiley-vch.de/supplements/
Download or read book Electronic Excitations at Metal Surfaces written by Ansgar Liebsch and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this new work, the focus is on the dynamical response of metal electrons to several types of incident electromagnetic fields. The author, an eminent theorist, discusses Time-Dependent Local Density Approximation's importance in both elucidating electronic surface excitations and describing the ground state properties of electronic systems. Chapters detail theoretical formulations and computational procedures, covering such areas as single-particle and collective modes, spatial distribution of the induced surface charges, and local electric fields. Excitation spectra are shown for a variety of clean simple metals, noble metals, chemisorbed overlayers, charged surfaces, and small metal particles.
