Download or read book Electronic Packaging for High Reliability Low Cost Electronics written by R.R. Tummala and published by Springer. This book was released on 2010-12-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated circuits are expected to increase their speed and power dramatically and rapidly. New packaging techniques are required if the devices are to remain within cost and size constraints. The present volume addresses new hermetic packaging, new materials for thermal management and assembly, and new components that integrate multiple functions (embedded substrates and component arrays), while retaining previous high levels of reliability. The book embraces many developments in fundamental materials science and manufacturing processes of discrete components, as well as developments in high speed, high integration packaging and more complex embedded component technologies.

Download or read book Electronic packaging for high reliability low cost electronics written by International microelectronics and packaging society and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Electronic Packaging written by Yong Liu and published by Springer Science & Business Media. This book was released on 2012-02-15 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronic Packaging presents an in-depth overview of power electronic packaging design, assembly,reliability and modeling. Since there is a drastic difference between IC fabrication and power electronic packaging, the book systematically introduces typical power electronic packaging design, assembly, reliability and failure analysis and material selection so readers can clearly understand each task's unique characteristics. Power electronic packaging is one of the fastest growing segments in the power electronic industry, due to the rapid growth of power integrated circuit (IC) fabrication, especially for applications like portable, consumer, home, computing and automotive electronics. This book also covers how advances in both semiconductor content and power advanced package design have helped cause advances in power device capability in recent years. The author extrapolates the most recent trends in the book's areas of focus to highlight where further improvement in materials and techniques can drive continued advancements, particularly in thermal management, usability, efficiency, reliability and overall cost of power semiconductor solutions.

Download or read book Electronic Packaging written by John H. Lau and published by McGraw-Hill Professional Publishing. This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is the ultimate electronic packaging resource, in which luminaries from the four intertwined disciplines of packaging present a one-stop guide to the state of the art. An absolute necessity for anyone working in the field, this "how-to" reference covers all the newest technologies, including BGA, Flip Chip, and CSP.

Download or read book Thermal Management for Opto electronics Packaging and Applications written by Xiaobing Luo and published by John Wiley & Sons. This book was released on 2024-08-12 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Management for Opto-electronics Packaging and Applications A systematic guide to the theory, applications, and design of thermal management for LED packaging In Thermal Management for Opto-electronics Packaging and Applications, a team of distinguished engineers and researchers deliver an authoritative discussion of the fundamental theory and practical design required for LED product development. Readers will get a solid grounding in thermal management strategies and find up-to-date coverage of heat transfer fundamentals, thermal modeling, and thermal simulation and design. The authors explain cooling technologies and testing techniques that will help the reader evaluate device performance and accelerate the design and manufacturing cycle. In this all-inclusive guide to LED package thermal management, the book provides the latest advances in thermal engineering design and opto-electronic devices and systems. The book also includes: A thorough introduction to thermal conduction and solutions, including discussions of thermal resistance and high thermal conductivity materials Comprehensive explorations of thermal radiation and solutions, including angular- and spectra-regulation radiative cooling Practical discussions of thermally enhanced thermal interfacial materials (TIMs) Complete treatments of hybrid thermal management in downhole devices Perfect for engineers, researchers, and industry professionals in the fields of LED packaging and heat transfer, Thermal Management for Opto-electronics Packaging and Applications will also benefit advanced students focusing on the design of LED product design.

Download or read book Digital Integrated Circuits written by John E. Ayers and published by CRC Press. This book was released on 2018-09-03 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exponential improvement in functionality and performance of digital integrated circuits has revolutionized the way we live and work. The continued scaling down of MOS transistors has broadened the scope of use for circuit technology to the point that texts on the topic are generally lacking after a few years. The second edition of Digital Integrated Circuits: Analysis and Design focuses on timeless principles with a modern interdisciplinary view that will serve integrated circuits engineers from all disciplines for years to come. Providing a revised instructional reference for engineers involved with Very Large Scale Integrated Circuit design and fabrication, this book delves into the dramatic advances in the field, including new applications and changes in the physics of operation made possible by relentless miniaturization. This book was conceived in the versatile spirit of the field to bridge a void that had existed between books on transistor electronics and those covering VLSI design and fabrication as a separate topic. Like the first edition, this volume is a crucial link for integrated circuit engineers and those studying the field, supplying the cross-disciplinary connections they require for guidance in more advanced work. For pedagogical reasons, the author uses SPICE level 1 computer simulation models but introduces BSIM models that are indispensable for VLSI design. This enables users to develop a strong and intuitive sense of device and circuit design by drawing direct connections between the hand analysis and the SPICE models. With four new chapters, more than 200 new illustrations, numerous worked examples, case studies, and support provided on a dynamic website, this text significantly expands concepts presented in the first edition.

Download or read book Foldable Flex and Thinned Silicon Multichip Packaging Technology written by John W. Balde and published by Springer Science & Business Media. This book was released on 2003-01-31 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foldable Flex and Thinned Silicon Multichip Packaging Technology presents newly emerging methods used to make stacked chip packages in the so-called 2-1/2 D technology (3-D in physical format, but interconnected only through the circuits on folded flex). It is also being used in single chip packages where the thinness of the chips and the flex substrate made packages significantly thinner than through any other means. Much of the work in this field has not been widely disseminated other than by papers presented at conferences and workshops. This book is organized to report on the developments in this technology, but with special additional material and emphasis. The intent is to do more than report on present state of the art. It is intended as an advocacy book, pointing out the reasons for 3-D assemblies, the reasons for Silicon-in-a-Package multichip modules, and the commercial availability of the techniques. The contributing authors, all leaders in this technical field, explore the needs, reveal the state of development and production, and point to changes in technology that can bring this technology into wider use for more complex applications. It is an advocacy book in this respect - advocacy for the use of a technology that is already mature, and advocacy for exploring ways to make it even more capable for the future. It will also do more than discuss the present; it will point out the deficiencies of the constructions, the needed availability of good flex material, the use of newer flex materials, such as LCP, and the implications from the use of the Integrated Mesh Power Systems to enhance the capability for future designs. Lastly it will discuss the serious problem of heat removal if multiple microprocessors are included.

Download or read book Advanced Adhesives in Electronics written by M O Alam and published by Elsevier. This book was released on 2011-05-25 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesives for electronic applications serve important functional and structural purposes in electronic components and packaging, and have developed significantly over the last few decades. Advanced adhesives in electronics reviews recent developments in adhesive joining technology, processing and properties. The book opens with an introduction to adhesive joining technology for electronics. Part one goes on to cover different types of adhesive used in electronic systems, including thermally conductive adhesives, isotropic and anisotropic conductive adhesives and underfill adhesives for flip-chip applications. Part two focuses on the properties and processing of electronic adhesives, with chapters covering the structural integrity of metal-polymer adhesive interfaces, modelling techniques used to assess adhesive properties and adhesive technology for photonics. With its distinguished editors and international team of contributors, Advanced adhesives in electronics is a standard reference for materials scientists, engineers and chemists using adhesives in electronics, as well as those with an academic research interest in the field. Reviews recent developments in adhesive joining technology, processing and properties featuring flip-chip applications Provides a comprehensive overview of adhesive joining technology for electronics including different types of adhesives used in electronic systems Focuses on the properties and processing of electronic adhesives, with chapters covering the structural integrity of metal-polymer adhesive interfaces and modelling techniques

Download or read book The Electronic Packaging Handbook written by Glenn R. Blackwell and published by CRC Press. This book was released on 2017-12-19 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: The packaging of electronic devices and systems represents a significant challenge for product designers and managers. Performance, efficiency, cost considerations, dealing with the newer IC packaging technologies, and EMI/RFI issues all come into play. Thermal considerations at both the device and the systems level are also necessary. The Electronic Packaging Handbook, a new volume in the Electrical Engineering Handbook Series, provides essential factual information on the design, manufacturing, and testing of electronic devices and systems. Co-published with the IEEE, this is an ideal resource for engineers and technicians involved in any aspect of design, production, testing or packaging of electronic products, regardless of whether they are commercial or industrial in nature. Topics addressed include design automation, new IC packaging technologies, materials, testing, and safety. Electronics packaging continues to include expanding and evolving topics and technologies, as the demand for smaller, faster, and lighter products continues without signs of abatement. These demands mean that individuals in each of the specialty areas involved in electronics packaging-such as electronic, mechanical, and thermal designers, and manufacturing and test engineers-are all interdependent on each others knowledge. The Electronic Packaging Handbook elucidates these specialty areas and helps individuals broaden their knowledge base in this ever-growing field.

Download or read book High k Gate Dielectric Materials written by Niladri Pratap Maity and published by CRC Press. This book was released on 2020-12-18 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume explores and addresses the challenges of high-k gate dielectric materials, one of the major concerns in the evolving semiconductor industry and the International Technology Roadmap for Semiconductors (ITRS). The application of high-k gate dielectric materials is a promising strategy that allows further miniaturization of microelectronic components. This book presents a broad review of SiO2 materials, including a brief historical note of Moore’s law, followed by reliability issues of the SiO2 based MOS transistor. It goes on to discuss the transition of gate dielectrics with an EOT ~ 1 nm and a selection of high-k materials. A review of the various deposition techniques of different high-k films is also discussed. High-k dielectrics theories (quantum tunneling effects and interface engineering theory) and applications of different novel MOSFET structures, like tunneling FET, are also covered in this book. The volume also looks at the important issues in the future of CMOS technology and presents an analysis of interface charge densities with the high-k material tantalum pentoxide. The issue of CMOS VLSI technology with the high-k gate dielectric materials is covered as is the advanced MOSFET structure, with its working structure and modeling. This timely volume will prove to be a valuable resource on both the fundamentals and the successful integration of high-k dielectric materials in future IC technology.

Download or read book Electronic Packaging Materials and Their Properties written by Michael Pecht and published by CRC Press. This book was released on 2017-12-19 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Packaging materials strongly affect the effectiveness of an electronic packaging system regarding reliability, design, and cost. In electronic systems, packaging materials may serve as electrical conductors or insulators, create structure and form, provide thermal paths, and protect the circuits from environmental factors, such as moisture, contamination, hostile chemicals, and radiation. Electronic Packaging Materials and Their Properties examines the array of packaging architecture, outlining the classification of materials and their use for various tasks requiring performance over time. Applications discussed include: interconnections printed circuit boards substrates encapsulants dielectrics die attach materials electrical contacts thermal materials solders Electronic Packaging Materials and Their Properties also reviews key electrical, thermal, thermomechanical, mechanical, chemical, and miscellaneous properties as well as their significance in electronic packaging.

Download or read book Electronic Materials Handbook written by and published by ASM International. This book was released on 1989-11-01 with total page 1234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1: Packaging is an authoritative reference source of practical information for the design or process engineer who must make informed day-to-day decisions about the materials and processes of microelectronic packaging. Its 117 articles offer the collective knowledge, wisdom, and judgement of 407 microelectronics packaging experts-authors, co-authors, and reviewers-representing 192 companies, universities, laboratories, and other organizations. This is the inaugural volume of ASMAs all-new ElectronicMaterials Handbook series, designed to be the Metals Handbook of electronics technology. In over 65 years of publishing the Metals Handbook, ASM has developed a unique editorial method of compiling large technical reference books. ASMAs access to leading materials technology experts enables to organize these books on an industry consensus basis. Behind every article. Is an author who is a top expert in its specific subject area. This multi-author approach ensures the best, most timely information throughout. Individually selected panels of 5 and 6 peers review each article for technical accuracy, generic point of view, and completeness.Volumes in the Electronic Materials Handbook series are multidisciplinary, to reflect industry practice applied in integrating multiple technology disciplines necessary to any program in advanced electronics. Volume 1: Packaging focusing on the middle level of the electronics technology size spectrum, offers the greatest practical value to the largest and broadest group of users. Future volumes in the series will address topics on larger (integrated electronic assemblies) and smaller (semiconductor materials and devices) size levels.

Download or read book Handbook Of Electronics Packaging Design and Engineering written by Bernard S. Matisoff and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Electronics Packaging Design and Engineering has been writ ten as a reference source for use in the packaging design of electronics equip ment. It is designed to provide a single convenient source for the solution of re curring design problems. The primary consideration of any design is that the end product meet or exceed the applicable product specifications. The judicious use of uniform design practices will realize the following economies and equipment improvements: • Economics of design. Uniform design practices will result in less engineering and design times and lower costs. They will also reduce the number of changes that may be required due to poor reliability, maintainability, or producibility. • Improved design. Better designs with increased reliability, maintainability, and producibility will result from the use of uniform design practices. • Production economies. Uniform designs employing standard available tools, materials, and parts will result in the cost control of manufacturing. The Handbook is intended primarily for the serious student of electronics packaging and for those engineers and designers actively engaged in this vital and interesting profession. It attempts to present electronics packaging as it is today. It can be used as a training text for instructional purposes and as a reference source for the practicing designer and engineer.

Download or read book Micro and Opto Electronic Materials and Structures Physics Mechanics Design Reliability Packaging written by Ephraim Suhir and published by Springer Science & Business Media. This book was released on 2007-05-26 with total page 1471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides the most comprehensive, up-to-date and easy-to-apply information on the physics, mechanics, reliability and packaging of micro- and opto-electronic materials. It details their assemblies, structures and systems, and each chapter contains a summary of the state-of-the-art in a particular field. The book provides practical recommendations on how to apply current knowledge and technology to design and manufacture. It further describes how to operate a viable, reliable and cost-effective electronic component or photonic device, and how to make such a device into a successful commercial product.

Download or read book Manufacturing Challenges in Electronic Packaging written by Y.C. Lee and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: About five to six years ago, the words 'packaging and manufacturing' started to be used together to emphasize that we have to make not only a few but thousands or even millions of packages which meet functional requirements. The aim of this book is to provide the much needed reviews and in-depth discussions on the advanced topics surrounding packaging and manufacturing. The first chapter gives a comprehensive review of manufacturing chal lenges in electronic packaging based on trends predicted by different resources. Almost all the functional specifications have already been met by technologies demonstrated in laboratories. However, it would take tremendous efforts to implement these technologies for mass production or flexible manufacturing. The topics crucial to this implementation are discussed in the following chapters: Chapter 2: Challenges in solder assembly technologies; Chapter 3: Testing and characterization; Chapter 4: Design for manufacture and assembly of electronic packages; Chapter 5: Process modeling, optimization and control in electronics manufacturing; and Chapter 6: Integrated manufacturing system for printed circuit board assembly. The electronics-based products are very competitive and becoming more and more application-specific. Their packages should fulfill cost, speed, power, weight, size, reliability and time-to-market requirements. More importantly, the packages should be manufacturable in mass or flexible production lines. These chapters are excellent references for professionals who need to meet the challenge through design and manufacturing improvements. This book will also introduce students to the critical issues for competitive design and manufacturing in electronic packaging.

Download or read book Electronic Packaging Science and Technology written by King-Ning Tu and published by John Wiley & Sons. This book was released on 2021-12-29 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Must-have reference on electronic packaging technology! The electronics industry is shifting towards system packaging technology due to the need for higher chip circuit density without increasing production costs. Electronic packaging, or circuit integration, is seen as a necessary strategy to achieve a performance growth of electronic circuitry in next-generation electronics. With the implementation of novel materials with specific and tunable electrical and magnetic properties, electronic packaging is highly attractive as a solution to achieve denser levels of circuit integration. The first part of the book gives an overview of electronic packaging and provides the reader with the fundamentals of the most important packaging techniques such as wire bonding, tap automatic bonding, flip chip solder joint bonding, microbump bonding, and low temperature direct Cu-to-Cu bonding. Part two consists of concepts of electronic circuit design and its role in low power devices, biomedical devices, and circuit integration. The last part of the book contains topics based on the science of electronic packaging and the reliability of packaging technology.

Download or read book Failure Modes and Mechanisms in Electronic Packages written by P. Singh and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the proliferation of packaging technology, failure and reliability have become serious concerns. This invaluable reference details processes that enable detection, analysis and prevention of failures. It provides a comprehensive account of the failures of device packages, discrete component connectors, PCB carriers and PCB assemblies.