Download or read book Electronic Control Systems written by Ross T Bannatyne and published by SAE International. This book was released on 2003-01-08 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic Control Systems describes the evolution of electronic control systems and examines growth experienced in the four main system categories - safety and convenience, powertrain, body controls, and entertainment and communications. The system trends and technologies are covered in detail. The report concludes with a summary of the challenges, changes on the horizon, and a discussion of how sustainable competitive advantage can perhaps be achieved.
Download or read book Electronic Control Systems written by Ross T Bannatyne and published by SAE International. This book was released on 2003-01-08 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic Control Systems describes the evolution of electronic control systems and examines growth experienced in the four main system categories - safety and convenience, powertrain, body controls, and entertainment and communications. The system trends and technologies are covered in detail. The report concludes with a summary of the challenges, changes on the horizon, and a discussion of how sustainable competitive advantage can perhaps be achieved.
Download or read book Protecting Industrial Control Systems from Electronic Threats written by Joseph Weiss and published by Momentum Press. This book was released on 2010 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at both the novice and expert in IT security and industrial control systems (ICS), this book will help readers gain a better understanding of protecting ICSs from electronic threats. Cyber security is getting much more attention and "SCADA security" (Supervisory Control and Data Acquisition) is a particularly important part of this field, as are Distributed Control Systems (DCS), Programmable Logic Controllers (PLCs), Remote Terminal Units (RTUs), Intelligent Electronic Devices (IEDs), and all the other, field controllers, sensors, drives, and emission controls that make up the "intelligence" of modern industrial buildings and facilities. Some Key Features include: How to better understand the convergence between Industrial Control Systems (ICS) and general IT systems Insight into educational needs and certifications How to conduct Risk and Vulnerability Assessments Descriptions and observations from malicious and unintentional ICS cyber incidents Recommendations for securing ICS
Download or read book Power Electronic Control in Electrical Systems written by Enrique Acha and published by Newnes. This book was released on 2002-01-08 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within this book the fundamental concepts associated with the topic of power electronic control are covered alongside the latest equipment and devices, new application areas and associated computer-assisted methods. *A practical guide to the control of reactive power systems *Ideal for postgraduate and professional courses *Covers the latest equipment and computer-aided analysis.
Download or read book Mechatronics written by William Bolton and published by Prentice Hall. This book was released on 1999 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The integration of electronic engineering, electrical engineering, computer technology and control engineering with mechanical engineering -- mechatronics -- now forms a crucial part in the design, manufacture and maintenance of a wide range of engineering products and processes. This book provides a clear and comprehensive introduction to the application of electronic control systems in mechanical and electrical engineering. It gives a framework of knowledge that allows engineers and technicians to develop an interdisciplinary understanding and integrated approach to engineering. This second edition has been updated and expanded to provide greater depth of coverage." -- Back cover.
Download or read book Control Systems for Complete Idiots written by David SMITH and published by . This book was released on 2019-07-12 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this day and age everything around us is automatic and our desire to automate more stuff is only increasing. Control systems finds its applications in everything you can possibly think of. The concept of Control system plays an important role in the working of, everything from home appliances to guided missiles to self-driving cars. These are just the examples of Control systems we create. Control systems also exist in nature. Within our own body, there are numerous control systems, such as the pancreas, which regulate our blood sugar. In the most abstract sense it is possible to consider every physical object a control system. Hence from an engineering perspective, it is absolutely crucial to be familiar with the analysis and designing methods of such Control systems. Control systems is one of those subjects that go beyond a particular branch of engineering. Control systems find its application in Mechanical, Electrical, Electronics, Civil Engineering and many other branches of engineering. Although this book is written in an Electrical engineering context, we are sure that others can also easily follow the topics and learn a thing or two about Control systems.In this book we provide a concise introduction into classical Control theory. A basic knowledge of Calculus and some Physics are the only prerequisites required to follow the topics discussed in the book. In this book, We've tried to explain the various fundamental concepts of Control Theory in an intuitive manner with minimum math. Also, We've tried to connect the various topics with real life situations wherever possible. This way even first timers can learn the basics of Control systems with minimum effort. Hopefully the students will enjoy this different approach to Control Systems. The various concepts of the subject are arranged logically and explained in a simple reader-friendly language with MATLAB examples.This book is not meant to be a replacement for those standard Control systems textbooks, rather this book should be viewed as an introductory text for beginners to come in grips with advanced level topics covered in those books. This book will hopefully serve as inspiration to learn Control systems in greater depths.
Download or read book Control Systems for Power Electronics written by Mahesh Patil and published by Springer. This book was released on 2015-04-01 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of the book covers most of the aspects as a primer on power electronics starting from a simple diode bridge to a DC-DC convertor using PWM control. The thyristor-bridge and the mechanism of designing a closed loop system are discussed in chapter one, two and three. The concepts are applied in the fourth chapter as a case study for buck converter which uses MOSFETs as switching devices and the closed loop system is elaborated in the fifth chapter. Chapter six is focused on the embedded system basics and the implementation of controls in the digital domain. Chapter seven is a case study of application of an embedded control system for a DC motor. With this book, the reader will find it easy to work on the practical control systems with microcontroller implementation. The core intent of this book is to help gain an accelerated learning path to practical control system engineering and transform control theory to an implementable control system through electronics. Illustrations are provided for most of the examples with fundamental mathematics along with simulations of the systems with their respective equations and stability calculations.
Download or read book Electronic Access Control written by Thomas L. Norman and published by Elsevier. This book was released on 2011-09-26 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic Access Control introduces the fundamentals of electronic access control through clear, well-illustrated explanations. Access Control Systems are difficult to learn and even harder to master due to the different ways in which manufacturers approach the subject and the myriad complications associated with doors, door frames, hardware, and electrified locks. This book consolidates this information, covering a comprehensive yet easy-to-read list of subjects that every Access Control System Designer, Installer, Maintenance Tech or Project Manager needs to know in order to develop quality and profitable Alarm/Access Control System installations. Within these pages, Thomas L. Norman – a master at electronic security and risk management consulting and author of the industry reference manual for the design of Integrated Security Systems – describes the full range of EAC devices (credentials, readers, locks, sensors, wiring, and computers), showing how they work, and how they are installed. A comprehensive introduction to all aspects of electronic access control Provides information in short bursts with ample illustrations Each chapter begins with outline of chapter contents and ends with a quiz May be used for self-study, or as a professional reference guide
Download or read book Mechatronics written by William Bolton and published by Prentice Hall. This book was released on 2011 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics is the integration of electronic engineering, mechanical engineering, control and computer engineering. This book offers a comprehensive introduction to the area.
Download or read book Control Design Techniques in Power Electronics Devices written by Hebertt J. Sira-Ramirez and published by Springer Science & Business Media. This book was released on 2006-09-07 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals specifically with control theories relevant to the design of control units for switched power electronics devices, for the most part represented by DC–DC converters and supplies, by rectifiers of different kinds and by inverters with varying topologies. The theoretical methods for designing controllers in linear and nonlinear systems are accompanied by multiple case studies and examples showing their application in the emerging field of power electronics.
Download or read book Dynamics and Control of Switched Electronic Systems written by Francesco Vasca and published by Springer Science & Business Media. This book was released on 2012-03-28 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increased efficiency and quality constraints imposed on electrical energy systems have inspired a renewed research interest in the study of formal approaches to the analysis and control of power electronics converters. Switched systems represent a useful framework for modeling these converters and the peculiarities of their operating conditions and control goals justify the specific classification of “switched electronic systems”. Indeed, idealized switched models of power converters introduce problems not commonly encountered when analyzing generic switched models or non-switched electrical networks. In that sense the analysis of switched electronic systems represents a source for new ideas and benchmarks for switched and hybrid systems generally. Dynamics and Control of Switched Electronic Systems draws on the expertise of an international group of expert contributors to give an overview of recent advances in the modeling, simulation and control of switched electronic systems. The reader is provided with a well-organized source of references and a mathematically-based report of the state of the art in analysis and design techniques for switched power converters. Intuitive language, realistic illustrative examples and numerical simulations help the reader to come to grips with the rigorous presentation of many promising directions of research such as: converter topologies and modulation techniques; continuous-time, discrete-time and hybrid models; modern control strategies for power converters; and challenges in numerical simulation. The guidance and information imparted in this text will be appreciated by engineers, and applied mathematicians working on system and circuit theory, control systems development, and electronic and energy conversion systems design.
Download or read book Control System Design written by Bernard Friedland and published by Courier Corporation. This book was released on 2012-03-08 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to state-space methods covers feedback control; state-space representation of dynamic systems and dynamics of linear systems; frequency-domain analysis; controllability and observability; shaping the dynamic response; more. 1986 edition.
Download or read book Analog and Digital Circuits for Electronic Control System Applications written by Jerry Luecke and published by Elsevier. This book was released on 2004-10-15 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s control system designers face an ever-increasing “need for speed and accuracy in their system measurements and computations. New design approaches using microcontrollers and DSP are emerging, and designers must understand these new approaches, the tools available, and how best to apply them. This practical text covers the latest techniques in microcontroller-based control system design, making use of the popular MSP430 microcontroller from Texas Instruments. The book covers all the circuits of the system, including: · Sensors and their output signals · Design and application of signal conditioning circuits · A-to-D and D-to-A circuit design · Operation and application of the powerful and popular TI MSP430 microcontroller · Data transmission circuits · System power control circuitry Written by an experienced microcontroller engineer and textbook author, the book is lavishly illustrated and includes numerous specific circuit design examples, including a fully tested and documented hands-on project using the MSP430 that makes use of the principles described. For students, engineers, technicians, and hobbyists, this practical text provides the answers you need to design modern control systems quickly and easily. Seasoned Texas Instruments designer provides a ground-up perspective on embedded control systems Pedagogical style provides a self-learning approach with examples, quizzes and review features
Download or read book Intelligent Control written by Yasuhiko Dote and published by . This book was released on 1998 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes intelligent control and its use in power electronic systems, specifically AC motor drives and uninterruptable power supply (UPS) systems. The book covers both the fundamentals of the subject and its practical applications. From the Foreword by Lofti A. Zadeh, Director ofBerkeley Soft Computing Center, California: 'What is unusual about [this book] is that it starts with a description of more or less classical control techniques; moves on to modern control and state space techniques; addresses in detail the complex issues arising in the analysis and design ofrobust control; takes up digital signal processing controllers; and finally, presents a very insightful exposition of soft computing techniques and their application to advanced control of AC drives and UPS systems.'
Download or read book Electric Motors and Control Systems written by Frank Petruzella and published by Career Education. This book was released on 2009-05-08 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book will introduce the reader to a broad range of motor types and control systems. It provides an overview of electric motor operation, selection, installation, control and maintenance. The text covers Electrical Code references applicable to the installation of new control systems and motors, as well as information on maintenance and troubleshooting techniques. It includes coverage of how motors operate in conjunction with their associated control circuitry. Both older and newer motor technologies are examined. Topics covered range from motor types and controls to installing and maintaining conventional controllers, electronic motor drives and programmable logic controllers." -- Publisher's description.
Download or read book Digital Signal Processing in Power Electronics Control Circuits written by Krzysztof Sozański and published by Springer Science & Business Media. This book was released on 2013-07-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many digital control circuits in current literature are described using analog transmittance. This may not always be acceptable, especially if the sampling frequency and power transistor switching frequencies are close to the band of interest. Therefore, a digital circuit is considered as a digital controller rather than an analog circuit. This helps to avoid errors and instability in high frequency components. Digital Signal Processing in Power Electronics Control Circuits covers problems concerning the design and realization of digital control algorithms for power electronics circuits using digital signal processing (DSP) methods. This book bridges the gap between power electronics and DSP. The following realizations of digital control circuits are considered: digital signal processors, microprocessors, microcontrollers, programmable digital circuits. Discussed in this book is signal processing, starting from analog signal acquisition, through its conversion to digital form, methods of its filtration and separation, and ending with pulse control of output power transistors. The book is focused on two applications for the considered methods of digital signal processing: an active power filter and a digital class D power amplifier. The major benefit to readers is the acquisition of specific knowledge concerning discussions on the processing of signals from voltage or current sensors using a digital signal processor and to the signals controlling the output inverter transistors. Included are some Matlab examples for illustration of the considered problems.
Download or read book Digital Control Systems written by Ioan Doré Landau and published by Springer Science & Business Media. This book was released on 2007-05-11 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extraordinary development of digital computers (microprocessors, microcontrollers) and their extensive use in control systems in all fields of applications has brought about important changes in the design of control systems. Their performance and their low cost make them suitable for use in control systems of various kinds which demand far better capabilities and performances than those provided by analog controllers. However, in order really to take advantage of the capabilities of microprocessors, it is not enough to reproduce the behavior of analog (PID) controllers. One needs to implement specific and high-performance model based control techniques developed for computer-controlled systems (techniques that have been extensively tested in practice). In this context identification of a plant dynamic model from data is a fundamental step in the design of the control system. The book takes into account the fact that the association of books with software and on-line material is radically changing the teaching methods of the control discipline. Despite its interactive character, computer-aided control design software requires the understanding of a number of concepts in order to be used efficiently. The use of software for illustrating the various concepts and algorithms helps understanding and rapidly gives a feeling of the various phenomena.
