Download or read book Electron Beam Wire Deposition Technology and Its Application written by Shuili Gong and published by Springer Nature. This book was released on 2022-05-16 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive introduction to the technical principles, materials, processes, and equipment of the electron beam wire deposition technology (EBWD), while focusing on the research results of the author’s scientific research team engaged in this technology in China. It mainly introduces the conceptual connotation, principle, and characteristics of the EBWD technology, its position and function in the additive manufacturing technology system, the direction and trend of technological development at home and abroad, the fundamentals and application results of the EBWD technology, including technical principles, equipment technology, special materials, manufacturing technology, quality testing, and application practices. So this book can serve as a reference book for teachers, students, and scientific researchers in scientific research institutions who are engaged in relevant studies.

Download or read book Handbook of Deposition Technologies for Films and Coatings written by Peter M. Martin and published by William Andrew. This book was released on 2009-12-01 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 3e, edited by Peter M. Martin, PNNL 2005 Inventor of the Year, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. This long-awaited revision includes updated and new chapters on atomic layer deposition, cathodic arc deposition, sculpted thin films, polymer thin films and emerging technologies. Extensive material was added throughout the book, especially in the areas concerned with plasma-assisted vapor deposition processes and metallurgical coating applications.

Download or read book NASA Tech Briefs written by and published by . This book was released on 2017-02 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Additive Manufacturing of Metal Alloys 1 written by Patrice Peyre and published by John Wiley & Sons. This book was released on 2022-09-07 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decade or so, additive manufacturing has revolutionized design and manufacturing methods by allowing more freedom in design and functionalities unattainable with conventional processes. This has generated extraordinarily high interest in both industrial and academic communities. Additive Manufacturing of Metal Alloys 1 puts forward a state of the art of additive manufacturing and its different processes, from metallic raw materials (in the form of powder or wire) to their properties after elaboration. It analyzes the physics and the modelling of existing AM processes as well as future elaboration processes. Using a balanced approach encapsulating basic notions and more advanced aspects for each theme, this book acts as a metal additive manufacturing textbook, as useful to professionals in the field as to the general public.

Download or read book Advances in Additive Manufacturing Processes written by Jeyaprakash Natarajan and published by Bentham Science Publishers. This book was released on 2021-11-29 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing or 3D printing is the construction of an object using CAD models. The technology for additive manufacturing s gaining traction in recent times due to its accessibility for both personal and industrial use, as well as its usefulness in quick prototyping (either of a whole object or its components) and meeting the needs of small commercial workloads. Advances in Additive Manufacturing Processes informs readers about the breadth of 3D printing processes. Chapters cover the basic knowledge of additive techniques and their industrial applications with relevant examples. The improvements in each method and their recent technical achievements with practical experimental data are highlighted. The book presents eight types of 3D printing processes, covering a diverse range of technologies which represent the industry. The contents also cover selected topics of relevance to additive manufacturing which include the formation of defects and factors that affect the mechanical properties of the additively manufactured components. Chapters also provide recent guidelines for adapting additive manufacturing processes to increase productivity and reduce manufacturing cost. Advances in Additive Manufacturing Processes is a handy reference for scholars and professionals involved in manufacturing industries and process engineering as well as hobbyists who are interested in the current state-of-the-art in 3D printing.

Download or read book Light Weight Materials written by Kaushik Kumar and published by John Wiley & Sons. This book was released on 2022-01-26 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the automotive and aerospace industries, the need for strong yet light materials has given rise to extensive research into aluminum and magnesium alloys and formable titanium alloys. All of these are categorized as light weight materials. The distinguishing feature of light weight materials is that they are low density, but they have a wide range of properties and, as a result, a wide range of applications. This book provides researchers and students with an overview of the recent advancements in light weight material processing, manufacturing and characterization. It contains chapters by eminent researchers on topics associated with light weight materials, including on the current buzzword “composite materials”. First, this book describes the current status of light weight materials. Then, it studies applications of these materials, given that, as the densities vary, so do the applications, ranging from automobiles and aviation to bio-mechatronics. This book will therefore serve as an excellent guide to this field.

Download or read book Superplastic Forming Diffusion Bonding Technology of Titanium Alloys written by Zhiqiang Li and published by Springer Nature. This book was released on 2023-10-26 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive illustration to the superplastic forming/diffusion bonding (SPF/DB) technology developed over decades of research on titanium alloys, process modeling, and its application. SPF/DB technology plays key roles in building aviation components with complicated structures, with highly beneficial effects when well designed. With the ever-increasing demand on components with multiple layers, there is an urgent need for an updated assessment of traditional and modern SPF/DB processing methods. Success critically depends on making the most practical and effective choice of SPF/DB method for a given application. The book introduces titanium and titanium alloys, SPF/DB processing and its modeling, and applications for building typical single or multiple layer(s) structures. Particular attention is paid to illustrating the microstructure evolution during SPF/DB processes. The information for making technical decisions about optimal choice of measurement and evaluation methods is also given in the book. Each chapter follows a focused and pragmatic format. Fully illustrated throughout, the book presents the state of the art in SPF/DB technology in a manner that makes it useful for engineers to improve the established forming processes and quality of components. This book is an essential reading material for industrial practitioners, academic researchers and postgraduates.

Download or read book Science Technology and Applications of Metals in Additive Manufacturing written by Bhaskar Dutta and published by Elsevier. This book was released on 2019-08-15 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science, Technology and Applications of Metal Additive Manufacturing provides a holistic picture of metal Additive Manufacturing (AM) that encompasses the science, technology and applications for the use of metal AM. Users will find design aspects, various metal AM technologies commercially available, a focus on merits and demerits, implications for qualification and certification, applications, cost modeling of AM, and future directions. This book serves as an educational guide, providing a holistic picture of metal AM that encompasses science, technology and applications for the real-life use of metal AM. Includes an overall understanding of metal additive manufacturing, Including steps involved (process flow) Discusses available commercial metal AM technologies and their relative strengths and weaknesses Reviews the process of qualification of AM parts, various applications, cost modeling, and the future directions of metal AM

Download or read book To Orbit and Back Again written by Davide Sivolella and published by Springer Science & Business Media. This book was released on 2013-08-27 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Space Shuttle has been the dominant machine in the U.S. space program for thirty years and has generated a great deal of interest among space enthusiasts and engineers. This book enables readers to understand its technical systems in greater depth than they have been able to do so before. The author describes the structures and systems of the Space Shuttle, and then follows a typical mission, explaining how the structures and systems were used in the launch, orbital operations and the return to Earth. Details of how anomalous events were dealt with on individual missions are also provided, as are the recollections of those who built and flew the Shuttle. Many photographs and technical drawings illustrate how the Space Shuttle functions, avoiding the use of complicated technical jargon. The book is divided into two sections: Part 1 describes each subsystem in a technical style, supported by diagrams, technical drawings, and photographs to enable a better understanding of the concepts. Part 2 examines different flight phases, from liftoff to landing. Technical material has been obtained from NASA as well as from other forums and specialists. Author Davide Sivolella is an aerospace engineer with a life-long interest in space and is ideally qualified to interpret technical manuals for a wider audience. This book provides comprehensive coverage of the topic including the evolution of given subsystems, reviewing the different configurations, and focusing on the solutions implemented.

Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.

Download or read book The Application of High Current Relativistic Electron Beams in Controlled Thermonuclear Research written by and published by . This book was released on 1974 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Science And Its Applications Proceedings Of The 9th Latin American Congress written by Pereira Osvaldo De Melo and published by World Scientific. This book was released on 2000-09-04 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the Ninth Latin American Congress on Surface Science and Its Applications. The topics include: recent advances in catalysis; electronic, structural properties; imaging and analysis of surfaces and interfaces; growth and characterization of thin films and vacuum and instrumentation.

Download or read book Workshop Advances in Materials Science II written by Igor Kovalev and published by Trans Tech Publications Ltd. This book was released on 2022-01-11 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed full text papers from the 2nd International Scientific Workshop Advances in Materials Science (AMS II 2021) Selected peer-reviewed full text papers from the 2nd International Scientific Workshop Advances in Materials Science (AMS II 2021), July 29-31, 2021, Krasnoyarsk, Russian Federation

Download or read book Quality Analysis of Additively Manufactured Metals written by Javad Kadkhodapour and published by Elsevier. This book was released on 2022-11-30 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality Analysis of Additively Manufactured Metals: Simulation Approaches, Processes, and Microstructure Properties provides readers with a firm understanding of the failure and fatigue processes of additively manufactured metals. With a focus on computational methods, the book analyzes the process-microstructure-property relationship of these metals and how it affects their quality while also providing numerical, analytical, and experimental data for material design and investigation optimization. It outlines basic additive manufacturing processes for metals, strategies for modeling the microstructural features of metals and how these features differ based on the manufacturing process, and more.Improvement of additively manufactured metals through predictive simulation methods and microdamage and micro-failure in quasi-static and cyclic loading scenarios are covered, as are topology optimization methods and residual stress analysis techniques. The book concludes with a section featuring case studies looking at additively manufactured metals in automotive, biomedical and aerospace settings. Provides insights and outlines techniques for analyzing why additively manufactured metals fail and strategies for avoiding those failures Defines key terms and concepts related to the failure analysis, quality assurance and optimization processes of additively manufactured metals Includes simulation results, experimental data and case studies

Download or read book High Resolution Focused Ion Beams FIB and its Applications written by Jon Orloff and published by Springer Science & Business Media. This book was released on 2003 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, we have attempted to produce a reference on high resolution focused ion beams (FIBs) that will be useful for both the user and the designer of FIB instrumentation. We have included a mix of theory and applications that seemed most useful to us. The field of FIBs has advanced rapidly since the application of the first field emission ion sources in the early 1970s. The development of the liquid metal ion source (LMIS) in the late 1960s and early 1970s and its application for FIBs in the late 1970s have resulted in a powerful tool for research and for industry. There have been hundreds of papers written on many aspects of LMIS and FIBs, and a useful and informative book on these subjects was published in 1991 by Phil Prewett and Grame Mair. Because there have been so many new applications and uses found for FIBs in the last ten years we felt that it was time for another book on the subject.

Download or read book Progress in Advanced Information and Communication Technology and Systems written by Mykhailo Ilchenko and published by Springer Nature. This book was released on 2022-11-17 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the most important research areas in information and communication technologies, namely the research in fields of modern information technologies that deal with various aspects of the analysis and solution of practically important issues of information systems in general, and contains discussion about the progression from big data to smart data, development of cloud-based architecture, practical implementation of Internet of Things (IoT), the fundamentals of information and analytical activities; studying of modern communication technologies contains original works dealing with many aspects of construction, using research and forecasting of technological and services characteristics of communication systems, as well as research of modern radio electronics technologies that contains actual papers, which show some effective technological solutions that can be used for the implementation of novel radio electronics systems. These results can be used in the implementation of novel systems and to promote information exchange in e-societies. This book offers a valuable resource for scientists, lecturers, specialists working at enterprises, and graduate and undergraduate students who engage with problems in information and communication technologies.

Download or read book Advanced Additive Manufacturing written by Igor V. Shishkovsky and published by BoD – Books on Demand. This book was released on 2022-07-20 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) is now being used to produce series components for the most demanding applications. It is a disruptive, if not revolutionary, manufacturing technology. The biggest advantage of this technology is its capacity to make parts with any free form, thus paving the way for free and complex part design. Components and integrated structures with complex designs that would not have been possible just a few years ago can now be made according to various requirements. The net-shape manufacturing capacity of AM allows a considerable saving of materials, conventional thermomechanical processing, and machining processes, making it an environmentally friendly manufacturing technology. This book includes two sections that cover new approaches in AM for biomedical applications and advanced technological solutions.